Answers
√(16 - x^2) is defined only for -4 ≤ x ≤ 4, and is continuous over this domain, so
[tex]\displaystyle\lim_{x\to-4^+}\sqrt{16-x^2}=\sqrt{16-(-4)^2}=0[/tex]
From the other side, the limit does not exist, because all x < -4 do not belong to the domain.
Taken together, the two-sided limit also does not exist.
Related Questions
What’s the correct answer for this question?
Answers
Answer:
107 meters
Step-by-step explanation:
Central angle = 123°
In radians
123° = 123π/180
123° = 2.147 radians
Putting in formula
S = r∅
S = (50)(2.147)
S = 107 meters
What’s the correct answer for this question?
Answers
Answer:
C.
Step-by-step explanation:
Volume of cylinder = πr²h
= (3.14)(4)(0.75)
= 9.4
Since she'll fill it half so
Amount of water to be filled = 4.7
g(x) = x2 – 5x + 2.
Answers
Answer:
Use the quadratic formula:
a = 1 b= -5 c= 2
x = - -5 +-sqr root (25 - 4 * 1 * 2) / 2 * 1
x = 5 +-sqr root (25 - 8) / 2
x = 5 +- sqr root (17) / 2
x1 = 5 +4.1231056256 / 2
x1 = 4.5615528128
x2 = 5 -4.1231056256 / 2
x2 = 4.5615528128
Step-by-step explanation:
How did governments pursue mercantilist policies?
Answers
Answer:
Most of the mercantilist policies were the outgrowth of the relationship between the governments of the nation-states and their mercantile classes
Step-by-step explanation:
In the British empire Mercantilism, an economic policy designed to increase a nation's wealth through ... Mercantilism did, however, lead to the adoption of enormous trade
Hope this helps. :)
Which inequality is represented by this graph?
Answers
Answer:
its probably a. x>-53
my appolgies if it's wrong
Question 2 (1 point)
How much does the prefix milli multiply the value of a base unit?
Answers
Answer:1000
Step-by-step explanation:
the average mark of candidates in an aptitude test was 138.5 with a standard deviation of 10.6. three scores extracted from the test are 178,122,100.what is the average of the extracted scores that are extreme value
Answers
Answer:
The average of the extracted scores = 133.33
Step-by-step explanation:
Given data the average mark of candidates in an aptitude test was 138.5 with a standard deviation of 10.6
mean of the aptitude test = 138.5
Standard deviation of the aptitude test = 10.6
Given three scores extracted from the test are 178,122,100
The average of the extracted scores = ∑x / n
The average of the extracted scores
= [tex]\frac{178 +122 +100}{3}[/tex]
= 133.33
Final answer:-
The average of the extracted scores = 133.33
The mean of the data set(9,5,y,2,x) is twice the data set(8,x,4,1,3).what is (y-x)
Answers
Answer:
[tex]y-x = 16[/tex]
Step-by-step explanation:
Given
Set 1: (9,5,y,2,x)
Set 2: (8,x,4,1,3)
Required
(y - x)
First the mean values of set 1 and set 2 has to be calculated
For set 1
[tex]Mean _1 = \frac{(9+5+y+2+x)}{5}[/tex]
Collect like terms
[tex]Mean _1 = \frac{9+5+2+y+x}{5}[/tex]
[tex]Mean _1 = \frac{16+ y+x}{5}[/tex]
For set 2
[tex]Mean _2 = \frac{(8+x+4+1+3)}{5}[/tex]
Collect like terms
[tex]Mean _2 = \frac{8+4+1+3+x}{5}[/tex]
[tex]Mean _2= \frac{16+ x}{5}[/tex]
Given that the mean of set 1 is twice the mean of set 2;
[tex]Mean_1 = 2Mean_2[/tex]
[tex]\frac{16+ y+x}{5} =2 * \frac{16+x}{5}[/tex]
Multiply both sided by 5
[tex]5 * \frac{16+ y+x}{5} = 5 * 2 * \frac{16+x}{5}[/tex]
[tex]16+ y+x = 2 * (16+x)[/tex]
Open bracket
[tex]16+ y+x = 32 + 2x[/tex]
Subtract 16 from both sides
[tex]16+ y+x- 16 = 32 + 2x - 16[/tex]
[tex]16 - 16 + y+x = 32 - 16 + 2x[/tex]
[tex]y+x = 16 + 2x[/tex]
Subtract 2x from both sides
[tex]y+x-2x = 16 + 2x-2x[/tex]
[tex]y-x = 16[/tex]
Simplify 1 · 0 - . can someone please help out
Answers
Answer:
That would be just 0 because anything multiplied by 0 is 0.
A chemist needs a 20% solution of alcohol. How many liters of 15% solution should be added to 4 liters of 40% solution to get a 20% solution?
Answers
Answer:
16
Step-by-step explanation:
Let's call the liters x. We can write 0.15x + 0.4 * 4 = 0.2 (x + 4). When we solve for x we get x = 16 liters.
An automobile manufacturer is concerned about a fault in the braking mechanism of a particular model. The fault can, on rare occasions, cause a catastrophe at high speed. The distribution of the number of cars per year that will experience the catastrophe is a random variable with variance = 5.
a) What is the probability that at most 3 cars per year will experience a catastrophe?
b) What is the probability that more than 1 car per year will experience a catastrophe?
Answers
Answer:
(a) Probability that at most 3 cars per year will experience a catastrophe is 0.2650.
(b) Probability that more than 1 car per year will experience a catastrophe is 0.9596.
Step-by-step explanation:
We are given that the distribution of the number of cars per year that will experience the catastrophe is a Poisson random variable with variance = 5.
Let X = the number of cars per year that will experience the catastrophe
SO, X ~ Poisson([tex]\lambda = 5[/tex])
The probability distribution for Poisson random variable is given by;
[tex]P(X=x) = \frac{e^{-\lambda} \times \lambda^{x} }{x!} ; \text{ where} \text{ x} = 0,1,2,3,...[/tex]
where, [tex]\lambda[/tex] = Poisson parameter = 5 {because variance of Poisson distribution is [tex]\lambda[/tex] only}
(a) Probability that at most 3 cars per year will experience a catastrophe is given by = P(X [tex]\leq[/tex] 3)
P(X [tex]\leq[/tex] 3) = P(X = 0) + P(X = 1) + P(X = 2) + P(X = 3)
= [tex]\frac{e^{-5} \times 5^{0} }{0!} +\frac{e^{-5} \times 5^{1} }{1!} +\frac{e^{-5} \times 5^{2} }{2!} +\frac{e^{-5} \times 5^{3} }{3!}[/tex]
= [tex]e^{-5} +(e^{-5} \times 5) +\frac{e^{-5} \times 25 }{2} +\frac{e^{-5} \times 125}{6}[/tex]
= 0.2650
(b) Probability that more than 1 car per year will experience a catastrophe is given by = P(X > 1)
P(X > 1) = 1 - P(X [tex]\leq[/tex] 1)
= 1 - P(X = 0) - P(X = 1)
= [tex]1-\frac{e^{-5} \times 5^{0} }{0!} -\frac{e^{-5} \times 5^{1} }{1!}[/tex]
= 1 - 0.00674 - 0.03369
= 0.9596
6(4x - 3) - 30
24x - 18 = 30
24% -18 + 18 = 30 + 18
24x = 48
24x 48
24 24
X = 2
Original Equation
Step 1
Step 2
Step 3
Step 4
Step 5
Which of these is not part of the solution process?
A. Using the associative property
B. Adding 18 to both sides to isolate the variable term
C. Dividing both sides by 24 to isolate the variable
D. Using the distributive property
Answers
Answer:
A-using the associative property
Step-by-step explanation:
what is the output from the following machine when the input is 4
Answers
Answer:
4 - 7 = -3
-3 / 3 = -1
Two positive numbers have a difference of 8. The larger number is three more than twice the smaller. Find the two numbers.
Answers
Answer:
5 and 13
Step-by-step explanation:
Let x represent the smaller number. Then the larger number is 2x+3, and the difference is ...
(2x+3) -(x) = 8
x = 5
The two numbers are 5 and 13.
_____
Check
Twice the smaller number is 10. 3 more than that is 13, the larger number. Their difference is 13 -5 = 8.
If f(3x − 1) = 6x − 1, find f(x) and f(0)
Answers
f(3x - 1) = 6x - 1
Rewrite 6x - 1 as a function of 3x - 1:
6x - 1 = 6x - 2 + 1 = 2(3x - 1) + 1
That is,
f(3x - 1) = 2(3x - 1) + 1
which means
f(x) = 2x + 1
and so
f(0) = 2*0 + 1 = 1
The answer and how to solve it.
Answers
Answer:
B
Step-by-step explanation:
Please answer this correctly
Answers
Answer:
40 - 59 ⇒ 6
60 - 79 ⇒ 5
Answer:
40-59: 6
60-79: 5
Step-by-step explanation:
If you just added up, you can find all the values.
A bag contains 4 green, 5 red, and 6 purple balls. The probability that all of them are red is?
Answers
Answer:
The percentage would be 20% (5x20=100)
Step-by-step explanation:
What is the value of X ?
A-12
B-17
C-23
D-25
Answers
Step-by-step explanation:
25 answer by considering
A company manager for a tire manufacturer is in charge of making sure there is the least amount of defective tires. If the tire manufacturing process is working properly, the average weight of a tire for a 4-door sedan is normally distributed with a mean of 22 pounds and a standard deviation of 0.76 pounds. The manager decides to reject a tire as underweight if it falls more than 1.5 interquartile ranges below the lower quartile of the specified shipment of tires. What proportion of tires will be rejected by this process?
Answers
Answer:
0.347% of the total tires will be rejected as underweight.
Step-by-step explanation:
For a standard normal distribution, (with mean 0 and standard deviation 1), the lower and upper quartiles are located at -0.67448 and +0.67448 respectively. Thus the interquartile range (IQR) is 1.34896.
And the manager decides to reject a tire as underweight if it falls more than 1.5 interquartile ranges below the lower quartile of the specified shipment of tires.
1.5 of the Interquartile range = 1.5 × 1.34896 = 2.02344
1.5 of the interquartile range below the lower quartile = (lower quartile) - (1.5 of Interquartile range) = -0.67448 - 2.02344 = -2.69792
The proportion of tires that will fall 1.5 of the interquartile range below the lower quartile = P(x < -2.69792) ≈ P(x < -2.70)
Using data from the normal distribution table
P(x < -2.70) = 0.00347 = 0.347% of the total tires will be rejected as underweight
Hope this Helps!!!
The proportion of the tires that would be denied for being underweight through the given process would be:
[tex]0.347[/tex]% of the total tires will be rejected as underweight.
Given that,
Interquartile Range [tex]= 1.5[/tex]
Standard Deviation [tex]= 0.76[/tex]
Considering Mean = 0
and Standard Deviation = 1
Since lower quartile = -0.67448
Upper quartile = +0.67448
IQ range = 1.34896
To find,
The proportion of tires would be rejected due to being underweight through the process would be:
1.5 of Interquartile Range = 1.5 × [tex]1.34896 = 2.02344[/tex]
Now,
1.5 of the IQ range below the lower quartile [tex]= (lower quartile) - (1.5 of Interquartile range)[/tex]
[tex]= -0.67448 - 2.02344[/tex]
[tex]= -2.69792[/tex]
The proportion of tires that would be under 1.5 of the interquartile range below the lower quartile:
[tex]= P(x < -2.69792)[/tex] ≈ [tex]P(x < -2.70)[/tex]
Using data through the Normal Distribution Table,
[tex]P(x < -2.70)[/tex] [tex]= 0.00347[/tex]
[tex]= 0.347[/tex]%
Thus, 0.347% of the total tires would be rejected as underweight.
Learn more about "Proportion" here:
brainly.com/question/2548537
Each square in the grid is a 1 x 1 unit square. What is the area of the shape
Answers
Answer:
So since the formula for a square is w*h
That means that the area is 1*1 or 1 unit^2
I knew it was a joke question.
:))))
Step-by-step explanation:
A children's roller coaster is limited to riders whose height is at least 30 inches and at most 48 inches. Write two inequalities that represent the height h of riders for the roller coaster.
Answers
Answer:
h≤48 h≥30
Step-by-step explanation:
how many real solutions does the equation x2 − 9 = 0 have?
Answers
Answer:
Zero
Step-by-step explanation:
Because when you replace x with a number and solve it it doesn't have the same answer as x2 − 9 = 0.
I hope this helped. I am sorry if you get this wrong.
Triangle QRS is dilated according to the rule DO,2 (x,y). On a coordinate plane, (0, 0) is the center of dilation. Triangle Q R S has points (negative 3, 3), (2, 4), and (negative 1, 1). What is true about the image ΔQ'R'S'? Select three options. Which statements are true? DO,2 (x,y) = (2x, 2y) Side Q'S' lies on a line with a slope of -1. QR is longer than Q'R'. The vertices of the image are closer to the origin than those of the pre-image. The distance from Q' to the origin is twice the distance from Q to the origin.
Answers
Answer:
Options A, B and E are correct
Step-by-step explanation:
From the information given above, we would draw a dilation that produces an image that is the same shape as the original image, but has a different size.
The scale factor is 2
QRS → Q'R'S' = (x,y) → 2(x,y)
The coordinates of ∆QRS
Q (-3, 3)
R (2, 4)
S (-1, 1)
To get the coordinates of Q'R'S', we would multiply each coordinate of the original triangle by the scale factor of 2 since the dilation is from the origin. In order words, each vertex of QRS is multiplied by 2 to get each of the vertex of Q'R'S'.
2 (x,y) = (2x, 2y)
The coordinates of ∆Q'R'S' becomes:
Q' (-6, 6)
R' (4, 8)
S' (-2, 2)
To determine the statements that are true about the image ΔQ'R'S,
we would graph the coordinates of the two triangles.
Starting with ΔABC, we would draw the dilation image of the triangle with a center at the origin and a scale factor of 2.
See attached the diagram for better explanation.
Let's check out each options and compare it with diagram we obtained:
a) DO, 2 (x,y) = (2x, 2y)
A dilation about the origin with a scale factor 2 is described using the above notation.
Q' = 2(-3,3) = [2(-3), 2(3)] = (-6, 6)
R' (4, 8) = 2(2,4) = [2(2), 2(4)] = (4, 8)
S' (-2, 2) = 2(-1,1) = [2(-1), 2(1)] = (-2, 2)
This option is correct
b) Side Q'S' lies on a line with a slope of -1
Q' (-6, 6)
S' (-2, 2)
coordinate (x, y)
Slope = m = (change in y)/(change in x)
m = (6-2)/[-6-(-2)]
= 4/(-6+2) = 4/-4
m = -1
This option is correct
c) QR is longer than Q'R'
Length of QR (-3 to 2) = 5
Length of Q'R' (-6 to 4) = 10
QR is not longer than Q'R'
This option is false
d) The vertices of the image are closer to the origin than those of the pre-image
The scale factor determines how much bigger or smaller the dilation image will be compared to the preimage. In a transformation, the final figure is referred to as the image. The original figure is referred to as the preimage.
From the diagram, the vertices of the preimage (original image) are closer to the origin than those of the dilation image.
This option is false
e) The distance from Q' to the origin is twice the distance from Q to the origin.
The distance from Q' to the origin (6 to 0) = 6
The distance from Q to the origin (3 to 0) = 3
The distance from Q' to the origin = 2(the distance from Q to the origin)
This option is correct
Answer:
A,B and E is correct
Step-by-step explanation:
If triangles DEF and NPQ are similar, what is the length of side d? As fraction or whole number.
Answers
The length of the side d would be 77/18.
What is the ratio of two quantities?Suppose that we've got two quantities with measurements as 'a' and 'b'
Then, their ratio(ratio of a to b) a:b
or
[tex]\dfrac{a}{b}[/tex]
If triangles DEF and NPQ are similar, then
7/9 = d/ (11/2)
By cross multiply
9d = 7 x 11/2
d = 77/2 ÷ 9
d = 77/18
Thus, The length of the side d would be 77/18.
Learn more about ratios here:
brainly.com/question/186659
#SPJ2
I NEED HELP PLEASE SOMEONE HELP ME
Answers
Answer:
2nd option is the correct answer
Step-by-step explanation:
3 times a number decreased by 6 is - 2
The length of a rectangle is increasing at a rate of 8 cmys and its width is increasing at a rate of 3 cmys. When the length is 20 cm and the width is 10 cm, how fast is the area of the rectangle increasing?
Answers
Answer:
The area of the rectangle increasing at the rate of 140 cm²/s
Step-by-step explanation:
Rectangle area:
A rectangle has two dimensions, length l and width w.
It's area is:
A = l*w.
When the length is 20 cm and the width is 10 cm, how fast is the area of the rectangle increasing?
We apply implicit differentiation to solve this question:
[tex]A = l*w[/tex]
So
[tex]\frac{dA}{dt} = l\frac{dw}{dt} + w\frac{dl}{dt}[/tex]
Length is 20, so [tex]l = 20[/tex].
Width is 10, so [tex]w = 10[/tex]
The length of a rectangle is increasing at a rate of 8 cm/s and its width is increasing at a rate of 3 cm/s.
This means that [tex]\frac{dl}{dt} = 8, \frac{dw}{dt} = 3[/tex]
So
[tex]\frac{dA}{dt} = l\frac{dw}{dt} + w\frac{dl}{dt}[/tex]
[tex]\frac{dA}{dt} = 20*3 + 10*8 = 140[/tex]
Area in cm².
So
The area of the rectangle increasing at the rate of 140 cm²/s
What is a word problem for 15 minus 28?
Answers
Answer:
A word problem for that would be Sam had 28 chocolates and Bob took away 15. How many does Sam have left?
Step-by-step explanation:
I don't know how to show work for writing a word problem. Sorry
Answer:
Step-by-step explanation:
Jane has $15 in her bank account. She wrote a $28 check for buying a fiction book. How much is her balance now?
You have been hired to assist in the data analysis at the court level (judge-level analysis will be done at a later time). You must use your knowledge of probability and conditional probability to help determine the likelihood of appeal and reversal for cases handled by different courts. Which outcome has the highest probability of occurring based on the data? a. A case in Domestic Relations Court being reversed b. A case in Common Pleas Court being reversed c. A case in Municipal Court being reversed d. There is not enough information to determine the answer
Answers
ANSWER: "There is not enough information to determine the answer". Option D is correct.
Step-by-step explanation:
For a case that was ruled by a court to be reversed by a higher court, they must be conditions in the ruling of the lower court that has been reconsidered by the higher court. This is regardless of the jurisdiction of the court or judge that ruled the case.
A case from all the courts in the options can be reversed by a higher court if the courts judgement lacks merit by the higher court, at any given times, irrespective of the court.
The Sky Train from the terminal to the rental car and longterm parking center is supposed to arrive every eight minutes. The waiting times for the train are known to follow a uniform distribution. What is the average waiting time (in minutes)
Answers
Answer:
Average waiting time = 4 minutes
Step-by-step explanation:
From this question, we are told that the sky train is supposed to arrive every 8 minutes.
Thus, the waiting time of the passengers for the train = 8 minutes.
Then, the average waiting time is simply the mean or 50th percentile of the total waiting time.
So, average waiting time = 50% × 8
Average waiting time = 4 minutes