On each coordinate plane, the parent function f(x) = |x| is represented by a bashed line and a translation is represented by a solid line. Which graph represents the translation g(x) = |x| - 4 as a solid line?

The curves given by the equations intersect at two points, namely (1, -2) and (5, -4). The point with the smallest x-value of intersection is (1, -2), while the point with the largest y-value of intersection is (5, -4).

To find the points of intersection, we need to set the two equations equal to each other and solve for x and y. The given equations are y = x - 2x^2 + 41 and y = 2x - 4. Setting these equations equal to each other, we have x - 2x^2 + 41 = 2x - 4.

Simplifying this equation, we get 2x^2 - 3x + 45 = 0. Solving this quadratic equation, we find two values of x, which are x = 1 and x = 5. Substituting these values back into either equation, we can find the corresponding y-values.

For x = 1, y = 1 - 2(1)^2 + 41 = -2, giving us the point (1, -2). For x = 5, y = 2(5) - 4 = 6, giving us the point (5, 6). Therefore, the points of intersection of the curves are (1, -2) and (5, 6). Among these points, (1, -2) has the smallest x-value, while (5, 6) has the largest y-value.

Learn more about equation here:

https://brainly.com/question/29657983

#SPJ11

No, Rolle's Theorem cannot be applied to the function [tex]f(x) = (x - 1)(x - 5)(x - 6)\\[/tex]  on the closed interval (4, 6].

Rolle's Theorem states that for a function to satisfy the conditions of the theorem, it must be continuous on the closed interval [a, b] and differentiable on the open interval (a, b). Additionally, the function must have equal values at the endpoints of the interval.

In this case, the function [tex]f(x) = (x - 1)(x - 5)(x - 6)[/tex] is continuous on the closed interval (4, 6], as it is a polynomial function and polynomials are continuous everywhere. However, the function is not differentiable at x = 5 because it has a point of non-differentiability (a vertical tangent) at x = 5.

Since f(x) fails to meet the condition of differentiability on the open interval (4, 6), Rolle's Theorem cannot be applied to this function on the interval (4, 6].

Learn more about Rolle's theorem, below:

https://brainly.com/question/32056113

#SPJ11

The t-value is often used instead of the z-value in statistical tests because the assumptions of the z-value are violated when the sample size is 30 or less.

The t-value is preferred over the z-value in certain scenarios due to the violation of assumptions associated with the z-value when the sample size is small (30 or less). The z-value assumes that the population standard deviation is known, which is often not the case in practice. In situations where the population standard deviation is unknown, the t-value is used because it relies on the sample standard deviation instead. By using the t-value, we account for the uncertainty associated with estimating the population standard deviation from the sample.

Additionally, the t-value is easier to calculate and interpret compared to the z-value. The t-distribution has a wider range of degrees of freedom, allowing for more flexibility in analyzing data. Moreover, the t-value is more widely known among statisticians and is readily available in statistical software packages, making it a convenient choice for conducting hypothesis tests and confidence intervals.

Overall, the t-value is preferred over the z-value when the assumptions of the z-value are violated or when the population standard deviation is unknown.

Learn more about deviation here:

https://brainly.com/question/23907081

#SPJ11

To evaluate the line integral ∮C F⋅dr using Stokes' Theorem, where F(x, y, z) = xi + yj + 5(x² + y²)k and C is the boundary of a part of the plane z = 1 - x² - y²

Stokes' Theorem states that the line integral of a vector field F along a closed curve C is equal to the surface integral of the curl of F over the surface S bounded by C. In this case, we want to evaluate the line integral over the boundary curve C, which is part of the plane z = 1 - x² - y².

To apply Stokes' Theorem, we first calculate the curl of F, which involves taking the cross product of the del operator and F. The curl of F is ∇ × F = (0, 0, -2x - 2y - 2x² - 2y²). Next, we find the surface S bounded by the curve C, which is part of the plane z = 1 - x² - y² that lies above C. The surface S can be parametrized in terms of the variables x and y.

Finally, we integrate the dot product of the curl of F and the surface normal vector over the surface S to obtain the surface integral. This gives us the value of the line integral ∮C F⋅dr using Stokes' Theorem.

Learn more about Stoke's Theorem here: brainly.in/question/33064157
#SPJ11

The definite integral of this expression does not exist and can be entered as DNE.

Let's see the further explanation:

The Fundamental Theorem of Calculus states that the definite integral of a continuous function from a to b is equal to the function f(b) - f(a)

In this case, the definite integral is 4 * (5 + e^v a) de which is not a continuous function.

The expression is not a continuous function because it relies on undefined variables. The variable e^v has no numerical value, and thus it is a non-continuous function.

As a result, the definite integral of this equation cannot be calculated and can instead be entered as DNE.

To know more about integral refer here:

https://brainly.com/question/31059545#

#SPJ11

The z-score for the value 75, with a mean of 74 and a standard deviation of 5, is 0.20.

The z-score measures the number of standard deviations a particular value is away from the mean.

It is calculated using the formula: z = (x - μ) / σ, where x is the value, μ is the mean, and σ is the standard deviation.

In this case, the value is 75, the mean is 74, and the standard deviation is 5.

Plugging these values into the formula, we get: z = (75 - 74) / 5 = 0.20.

The positive value of the z-score indicates that the value of 75 is 0.20 standard deviations above the mean.

Since the standard deviation is 5, we can interpret this as 75 being 1 unit (0.20 × 5) above the mean.

The z-score is a useful measure as it allows us to compare values from different distributions and determine their relative positions.

It also helps in understanding the significance of a particular value in relation to the distribution it belongs to.

Learn more about standard deviation here:

https://brainly.com/question/475676

#SPJ11

The infinite series Σ(6/n) from n = 1 to ∞ is the sum of an infinite number of terms obtained by dividing 6 by positive integers. The series diverges to positive infinity, meaning the sum increases without bound as more terms are added.

The infinite series can be expressed using sigma notation as follows:

Σ(6/n) from n = 1 to ∞.

In this series, the term 6/n represents the nth term of the series. The index variable n starts from 1 and goes to infinity, indicating that we sum an infinite number of terms.

By plugging in different values of n into the term 6/n, we can see that the series expands as follows:

6/1 + 6/2 + 6/3 + 6/4 + 6/5 + ...

Each term in the series is obtained by taking 6 and dividing it by the corresponding positive integer n. As n increases, the terms in the series become smaller and approach zero.

However, since we are summing an infinite number of terms, the series does not converge to a finite value. Instead, it diverges to positive infinity.

In conclusion, the infinite series Σ(6/n) from n = 1 to infinity represents the sum of an infinite number of terms, where each term is obtained by dividing 6 by the corresponding positive integer. The series diverges to positive infinity, meaning that the sum of the series increases without bound as more terms are added.

To know more about infinite series refer here:

https://brainly.com/question/11764756#

#SPJ11

Complete Question:

Write the infinite series using sigma notation.

6 + 6/2 + 6/3 + 6/4 + 6/5 + ......= Σ

The form of your answer will depend on your choice of the lower limit of summation. Enter infinity for 0.

To find the derivatives of the given functions, we will apply the power rule and the chain rule as necessary. Answer :   0.20 * x^0.80 * y^(0.20 - 1) = 0.20 * x^0.80 * y^(-0.80)

a) f(x) = 2 ln(x) + 12:

Using the power rule and the derivative of ln(x) (which is 1/x), we have:

f'(x) = 2 * (1/x) + 0 = 2/x

b) g(x) = ln(sqrt(x^2 + 3)):

Using the chain rule and the derivative of ln(x) (which is 1/x), we have:

g'(x) = (1/(sqrt(x^2 + 3))) * (1/2) * (2x) = x / (x^2 + 3)

c) H(x) = sin(sin(2x)):

Using the chain rule and the derivative of sin(x) (which is cos(x)), we have:

H'(x) = cos(sin(2x)) * (2cos(2x)) = 2cos(2x) * cos(sin(2x))

For the given formula N(x, y) = x^0.80 * y^0.20, it seems to be a multivariable function with respect to x and y. To find the partial derivatives, we differentiate each term with respect to the corresponding variable.

∂N/∂x = 0.80 * x^(0.80 - 1) * y^0.20 = 0.80 * x^(-0.20) * y^0.20

∂N/∂y = 0.20 * x^0.80 * y^(0.20 - 1) = 0.20 * x^0.80 * y^(-0.80)

Please note that these are the partial derivatives of N with respect to x and y, respectively, assuming the given formula is correct.

Learn more about derivative  : brainly.com/question/24062595

#SPJ11

The volume of a right circular cylinder with a diameter of 8 meters and a height of 12 meters is: B. 192π m³.

In Mathematics and Geometry, the volume of a right circular cylinder can be calculated by using this formula:

Volume of a right circular cylinder, V = πr²h

Where:

Since the diameter is 8 meters, the radius can be determined as follows;

Radius = diameter/2 = 8/2 = 4 meters.

By substituting the given parameters into the volume of a right circular cylinder formula, we have the following;

Volume of cylinder, V = π × 4² × 12

Volume of cylinder, V = π × 16 × 12

Volume of cylinder, V = 192π m³.

Read more on cylinder here: https://brainly.com/question/27933016

#SPJ1

The volume of a right circular cylinder with a diameter of 8 meters and a height of 12 meters is 192[tex]\pi[/tex]m³

Given that ;

Diameter = 8 m

Height = 12 m

We know that radius = diameter / 2

Radius (r) = 8 / 2

r = 4 m

Formula for calculating volume of right circular cylinder = [tex]\pi[/tex]r²h

Now, putting the given values in formula;

volume = [tex]\pi[/tex] × 4 × 4 × 12

volume = 192 [tex]\pi[/tex] m ³

Thus, the volume of a right circular cylinder with a diameter of 8 meters and a height of 12 meters is 192[tex]\pi[/tex]m³

To know more about volume of cylinder :

https://brainly.com/question/9624219

A. There are no points on the curve with a horizontal tangent line.

B. The point on the curve with a vertical tangent line is (-42, 119).

To find the points on the curve with a horizontal tangent line, we need to find the values of t where dy/dt = 0.

Given:

x = t^2 – 12t – 6

y = t + 18t + 5

Taking the derivative of y with respect to t:

dy/dt = 1 + 18 = 19

For a horizontal tangent line, dy/dt = 0. However, in this case, dy/dt is always equal to 19. Therefore, there are no points on the curve with a horizontal tangent line.

To find the points on the curve with a vertical tangent line, we need to find the values of t where dx/dt = 0.

Taking the derivative of x with respect to t:

dx/dt = 2t - 12

For a vertical tangent line, dx/dt = 0. Solving the equation:

2t - 12 = 0

2t = 12

t = 6

Substituting t = 6 into the equations for x and y:

x = 6^2 – 12(6) – 6 = 36 - 72 - 6 = -42

y = 6 + 18(6) + 5 = 6 + 108 + 5 = 119

Therefore, the point on the curve with a vertical tangent line is (-42, 119).

To learn more about tangent line visit : https://brainly.com/question/30162650

#SPJ11

We can apply the reciprocal identities to find the values of tant (tangent of angle t) and csct (cosecant of angle t). By utilizing these trigonometric identities, we can determine that tant is equal to -15/8 and csct is equal to -17/15.

Given that sint = -15/17 and cost = 8/17, we can use the reciprocal and quotient identities to find the values of tant and csct.

The reciprocal identity states that the tangent (tant) is equal to the reciprocal of the cotangent (cot). Therefore, we can find the value of tant by taking the reciprocal of cost:

tant = 1 / cot = 1 / (cost / sint) = sint / cost = (-15/17) / (8/17) = -15/8

Next, the quotient identity states that the cosecant (csct) is equal to the reciprocal of the sine (sint). Thus, we can find the value of csct by taking the reciprocal of sint:

csct = 1 / sin = 1 / sint = 1 / (-15/17) = -17/15

Therefore, the value of tant is -15/8 and the value of csct is -17/15.

To learn more about reciprocal identity click here : brainly.com/question/27642948

#SPJ11

(a) The critical number is x = 0.

(b) The function is increasing on (-∞, 0) and decreasing on (0, +∞).

(c) The function has a local maximum at x = 0, with a value of f(0) = 1.

To find the critical numbers of the function f(x) = -x^2 + 1:

(a) Critical numbers occur when the derivative of the function is equal to zero or undefined. Let's first find the derivative of f(x):

f'(x) = -2x

To find the critical numbers, we set f'(x) = 0 and solve for x:

-2x = 0

x = 0

Therefore, the critical number of the function is x = 0.

(b) To determine the intervals of increase or decrease, we examine the sign of the derivative on different intervals.

On the interval (-∞, 0), we can choose a test point, let's say x = -1, and substitute it into the derivative:

f'(-1) = -2(-1) = 2

Since f'(-1) = 2 is positive, the derivative is positive on the interval (-∞, 0). This means that the function is increasing on this interval.

On the interval (0, +∞), we can choose a test point, let's say x = 1, and substitute it into the derivative:

f'(1) = -2(1) = -2

Since f'(1) = -2 is negative, the derivative is negative on the interval (0, +∞). This means that the function is decreasing on this interval.

Therefore, the function f(x) = -x^2 + 1 is increasing on (-∞, 0) and decreasing on (0, +∞).

(c) To find the local maximum and local minimum values, we examine the critical number and the behavior of the function around it.

At x = 0, the critical number, we can evaluate the function f(x):

f(0) = -(0)^2 + 1 = 1

Therefore, the function has a local maximum at x = 0, and the local maximum value is f(0) = 1.

Since the function is a downward-opening parabola, the local maximum at x = 0 is also the global maximum of the function.

There are no local minimum values for this function since it only has a local maximum.

To summarize:

(a) The critical number is x = 0.

(b) The function is increasing on (-∞, 0) and decreasing on (0, +∞).

(c) The function has a local maximum at x = 0, with a value of f(0) = 1.

To learn more about local maximum

https://brainly.com/question/14319836

#SPJ11

The value of the function f(x) = log(x) at x = 25.5 is approximately 3.232.

To evaluate the function f(x) = log(x) at x = 25.5, we substitute the given value into the logarithmic expression:

f(25.5) = log(25.5)

Using a calculator, we can find the numerical value of the logarithm:

f(25.5) ≈ 3.232

Rounding the result to three decimal places, we have:

f(25.5) ≈ 3.232

Therefore, the value of the function f(x) = log(x) at x = 25.5 is approximately 3.232.

It's important to note that the logarithm function returns the exponent to which the base (usually 10 or e) must be raised to obtain a given number. In this case, the logarithm of 25.5 represents the exponent to which the base must be raised to obtain 25.5. The numerical approximation of 3.232 indicates that 10 raised to the power of 3.232 is approximately equal to 25.5.

The answer options provided in the question do not include the accurate result, which is approximately 3.232.

for more such question on function visit

https://brainly.com/question/11624077

#SPJ8

a.The derivatives using implicit differentiation for the given equations is y' = (5 - e^(xy) - dx * d/dx (e^(xy))) / 4

b. The derivatives using implicit differentiation for the given equations is  2px + 2 - (5 - e^(xy) - dx * d/dx (e^(xy))) * y

To find the derivatives using implicit differentiation for the given equations, let's proceed step by step:

a. For the equation dx * e^(xy) = 5x + 4y + 9:

Take the derivative of both sides with respect to x:

d/dx (dx * e^(xy)) = d/dx (5x + 4y + 9)

Simplify the left side using the product rule:

d/dx (dx) * e^(xy) + dx * d/dx (e^(xy)) = 5 + 4y' + 0

Since dx/dx = 1, the first term simplifies to e^(xy):

e^(xy) + dx * d/dx (e^(xy)) = 5 + 4y'

Now, isolate y' by rearranging the equation:

4y' = 5 - e^(xy) - dx * d/dx (e^(xy))

Finally, divide by 4 to solve for y':

y' = (5 - e^(xy) - dx * d/dx (e^(xy))) / 4

b. For the equation d²y/dx² + y² = px² + 2x:

Take the derivative of both sides with respect to x:

d/dx (d²y/dx² + y²) = d/dx (px² + 2x)

Apply the chain rule to the first term:

d²y/dx² + 2y * dy/dx = 2px + 2

Simplify the equation:

d²y/dx² + 2y * dy/dx = 2px + 2 - 2y * dy/dx

Rearrange the equation to solve for d²y/dx²:

d²y/dx² = 2px + 2 - 2y * dy/dx - 2y * dy/dx

= 2px + 2 - 4y * dy/dx

Note that dy/dx can be replaced using the previous equation:

dy/dx = (5 - e^(xy) - dx * d/dx (e^(xy))) / 4

Substitute dy/dx into the equation:

d²y/dx² = 2px + 2 - 4y * ((5 - e^(xy) - dx * d/dx (e^(xy))) / 4)

= 2px + 2 - (5 - e^(xy) - dx * d/dx (e^(xy))) * y

These are the derivatives obtained through implicit differentiation for the given equations.

To learn more about differentiation click on,

brainly.com/question/15084184

#SPJ11

The marginal profit function can be determined by taking the derivative of the cost function with respect to x. In this case, the cost function is C'(x) = 0.02x + 4000. Taking the derivative of C'(x) will give us the marginal profit function.

To find the derivative, we differentiate each term separately. The derivative of 0.02x is simply 0.02, as the derivative of x with respect to x is 1. The derivative of the constant term 4000 is 0, as the derivative of a constant is always 0.

Therefore, the marginal profit function is P'(x) = 0.02.

The marginal profit function is constant at 0.02, meaning that for each additional plant produced, the marginal profit will increase by 0.02 units. This provides insight into the incremental profitability of producing additional potted plants within the given demand range.

Learn more about marginal profit function here:

https://brainly.com/question/28856941

#SPJ11

The function [tex]S(t) = (t^2 - 1)^3[/tex] can have points that minimize or maximize the function. To find them, we need to determine the critical points by finding where the derivative equals zero or is undefined.

There are no inflection points in the function since it is a polynomial of degree 6.

To find the points that minimize or maximize the function [tex]S(t) = (t^2 - 1)^3[/tex], we need to examine the critical points. The critical points occur where the derivative equals zero or is undefined.

Taking the derivative of S(t) with respect to t, we get:

[tex]S'(t) = 3(t^2 - 1)^2 * 2t = 6t(t^2 - 1)^2[/tex]

To find the critical points, we set S'(t) = 0 and solve for t:

[tex]6t(t^2 - 1)^2 = 0[/tex]

This equation gives us two possibilities: t = 0 or [tex]t^2 - 1 = 0[/tex]. For t = 0, we have a critical point. For t^2 - 1 = 0, we get t = -1 and t = 1 as additional critical points.

To determine if these critical points correspond to local minima, local maxima, or neither, we can use the first or second derivative test. However, since the second derivative is not provided, we cannot definitively determine the nature of these critical points.

Regarding inflection points, an inflection point occurs where the concavity changes. Since the function [tex]S(t) = (t^2 - 1)^3[/tex] is a polynomial of degree 6, its concavity does not change, and therefore, there are no inflection points in the function.

To learn more about inflection points visit:

brainly.com/question/29183031

#SPJ11

The length of side x is approximately 11.6622.

To find the length of side x in the triangle, we can use the Law of Sines, which states that the ratio of the length of a side of a triangle to the sine of its opposite angle is constant. In this case, we have the following information:

Side opposite angle 33°: 29

Side opposite angle 20°: x

Using the Law of Sines, we can set up the following proportion:

x / sin(20°) = 29 / sin(33°)

To find the length of x, we can rearrange the equation:

x = (29 * sin(20°)) / sin(33°)

Let's calculate the value of x using this formula:

x = (29 * sin(20°)) / sin(33°)

x ≈ 11.6622

Rounding the answer to 4 decimal places, the length of side x is approximately 11.6622.

To learn more about triangle

https://brainly.com/question/31092331

#SPJ11

(a) For a = 1, the vector field F is conservative, (b) For a = 1, the potential function V such that F = ∇V is: V = (1/3)x³ + xy z + (y²/2 + 2xyz) + xyz + z²/2 + C

To determine the values of a for which the vector field F = (x² + yz)i + a(y + 2zx)j + (xy+z)k is conservative, we need to check if the curl of F is zero. If the curl is zero, then F is conservative.

The curl of a vector field F = P i + Q j + R k is given by the following determinant:

curl(F) = ( ∂R/∂y - ∂Q/∂z ) i + ( ∂P/∂z - ∂R/∂x ) j + ( ∂Q/∂x - ∂P/∂y ) k

The curl of F:

∂R/∂y = 1

∂Q/∂z = a

∂P/∂z = -2ax

∂R/∂x = y

∂Q/∂x = 0

∂P/∂y = 0

Plugging these values into the curl formula, we have:

curl(F) = (1 - a) i + (-2ax) j + y k

For the curl to be zero, each component of the curl must be zero. Therefore, we have the following conditions:

1 - a = 0  (from the i-component)

-2ax = 0  (from the j-component)

y = 0     (from the k-component)

From the first condition, we find that a = 1.

Substituting a = 1 into the second and third conditions, we have:

-2x = 0

y = 0

∴ x = 0 and y = 0.

Therefore, the vector field F is conservative for a=1.

To obtain a potential function V such that F = ∇V, we integrate each component of F with respect to the corresponding variable:

V = ∫(x² + yz) dx = (1/3)x³ + xy z + g(y,z)

V = ∫a(y + 2zx) dy = a(y²/2 + 2xyz) + h(x,z)

V = ∫(xy + z) dz = xyz + z²/2 + k(x,y)

Combining these terms, we have:

V = (1/3)x³ + xy z + a(y²/2 + 2xyz) + xyz + z²/2 + C

Therefore, for a = 1, the potential function V such that F = ∇V is:

V = (1/3)x³ + xy z + (y²/2 + 2xyz) + xyz + z²/2 + C

To know more about  potential function refer here:

https://brainly.com/question/28156550#

#SPJ11

The correct relationship between a and b that must be true in the given system of inequalities is ∣a∣ > ∣b∣. The answer is C

What is a system of inequalities?

A system of inequalities refers to a set of multiple inequalities that are considered simultaneously. The solution to the system consists of all the values that satisfy each inequality in the system. It represents a region in the coordinate plane where the shaded area encompasses all the valid solutions for the given set of inequalities.

Given the inequalities y < -x + a and y > x + b, we know that the point (0,0) satisfies both of these inequalities. Plugging in x = 0 and y = 0 into the inequalities, we get:

0 < a   (from y < -x + a)

0 > b   (from y > x + b)

From these equations, we can conclude that a must be greater than 0 (since 0 < a) and b must be less than 0 (since 0 > b). To compare their magnitudes, we take the absolute values:

∣a∣ > 0   (since a > 0)

∣b∣ < 0   (since b < 0)

Since the magnitude of a (∣a∣) is greater than the magnitude of b (∣b∣), the correct relationship is ∣a∣ > ∣b∣, which is option C.

To know more about inequalities, refer here:
https://brainly.com/question/2293190
#SPJ4

The test statistic for the significance test is calculated as 3.6.

To determine if there is convincing evidence that the mean height of five-year-old children in this city is greater than 42.5 inches, we can perform a hypothesis test.

The null hypothesis, denoted as [tex]H_0[/tex], assumes that the mean height is equal to 42.5 inches, while the alternative hypothesis, denoted as [tex]H_a[/tex], assumes that the mean height is greater than 42.5 inches.

Using the given sample data, we can calculate the test statistic.

The sample mean height is 44.1 inches, and the standard deviation is 3.5 inches.

Since the population standard deviation is unknown, we can use a t-test.

The formula for the t-test statistic is given by (sample mean - hypothesized mean) / (sample standard deviation / √n).

Plugging in the values, we have (44.1 - 42.5) / (3.5 / √40) ≈ 3.6.

This test statistic measures how many standard deviations the sample mean is away from the hypothesized mean under the assumption of the null hypothesis.

To determine if the data provides convincing evidence, we compare the test statistic to the critical value corresponding to the significance level chosen for the test.

If the test statistic exceeds the critical value, we reject the null hypothesis in favor of the alternative hypothesis, providing evidence that the mean height of five-year-old children in this city is greater than 42.5 inches.

Without specifying the chosen significance level, we cannot definitively state if the data provides convincing evidence.

However, if the test statistic of 3.6 exceeds the critical value for a given significance level, we can conclude that the data provides convincing evidence at that specific level.

Learn more about standard deviation here:

https://brainly.com/question/475676

#SPJ11

All the values of solution are,

⇒ m ∠A = 90 degree

⇒ ∠C = 62 Degree

⇒ BC = 6.2

⇒ m AC = 56°

⇒ m AB = 124 degree

We have to given that,

A triangle inscribe the circle.

Hence, We can find all the values as,

Measure of angle A is,

⇒ m ∠A = 90 degree

And, We know that,

Sum of all the interior angle of a triangle are 180 degree.

Hence, We get;

⇒ ∠A + ∠B + ∠C = 180

⇒ 90 + 28 + ∠C = 180

⇒ 118 + ∠C = 180

⇒ ∠C = 180 - 118

⇒ ∠C = 62 Degree

By Pythagoras theorem,

⇒ AB² = AC² + BC²

⇒ 7.3² = 3.9² + BC²

⇒ 53.29 = 15.21 + BC²

⇒ BC² = 53.29 - 15.21

⇒ BC² = 38.08

⇒ BC = 6.2

⇒ m AC = 2 × ∠ABC

⇒ m AC = 2 × 28

⇒ m AC = 56°

⇒ m AB = 180 - m AC

⇒ m AB = 180 - 56

⇒ m AB = 124 degree

Learn more about the angle visit:;

https://brainly.com/question/25716982

#SPJ1

The values of the variables are:

1.

a = 14.69

b = 20.22

2.

p = 11.28

q = 4.08

3.

x = 18.25

y = 17

4.

a = 9

b = 16.67

We have,

1.

Sin 36 = a / 25

0.59 = a/25

a = 0.59 x 25

a = 14.69

Cos 36 = b / 25

0.81 = b / 25

b = 0.81 x 25

b = 20.22

2.

Sin 20 = q / 12

0.34 = q / 12

q = 0.34 x 12

q = 4.08

Cos 20 = p / 12

0.94 = p / 12

p = 0.94 x 12

p = 11.28

3.

Sin 43 = y/25

0.68 = y / 25

y = 0.68 x 25

y = 17

Cos 43 = x/25

0.73 = x / 25

x = 0.73 x 25

x = 18.25

4.

Sin 57 = 14 / b

0.84 = 14 / b

b = 14 / 0.84

b = 16.67

Cos 57 = a / b

0.54 = a / 16.67

a = 0.54 x 16.67

a = 9

Thus,

The values of the variables are:

1.

a = 14.69

b = 20.22

2.

p = 11.28

q = 4.08

3.

x = 18.25

y = 17

4.

a = 9

b = 16.67

Learn more about trigonometric identities here:

https://brainly.com/question/14746686

#SPJ1

Given an average of 600 items and a variance of 200, the probability that the factory will produce between 400 and 800 items next week can be determined using the normal distribution and the concept of standard deviation.

The variance provides a measure of how spread out the data is from the mean. In this case, with a variance of 200, we can calculate the standard deviation by taking the square root of the variance, which is approximately 14.14. Next, we can use the concept of the normal distribution to estimate the probability of the factory producing between 400 and 800 items.

Since the distribution is approximately normal, we can use the empirical rule or the standard deviation to estimate the probabilities. Using the empirical rule, which states that in a normal distribution, approximately 68% of the data falls within one standard deviation of the mean, we can estimate that there is a high probability (approximately 68%) that the factory will produce between 400 and 800 items next week.

Learn more about probability here:

https://brainly.com/question/31828911

#SPJ11

The limit of the given function  lim_(x,y)→(ln(6),0) e^(x-y)  is 6.

To find the limit, we need to evaluate the expression as (x, y) approaches (ln(6), 0).

The expression is given by

lim_(x,y)→(ln(6),0) e^(x-y)

Since the second limit involves the variable "Y" instead of "y," we can treat it as a separate variable. Let's rename it as Z for clarity.

Now the expression becomes:

lim_(x,y)→(ln(6),0) e^(x-y)

Note that the second limit does not depend on the variable "y" anymore, so we can treat it as a constant.

We can rewrite the expression as:

lim_(x,y)→(ln(6),0) e^(x-y)

Now, let's evaluate each limit separately:

lim_(x,y)→(ln(6),0) e^(x-y) = e^(ln(6)-0) = 6.

Finally, we multiply the two limits together:

lim_(x,y)→(ln(6),0) e^(x-y)  = 6

Therefore, the limit is 36.

To know more about Limits refer to this link-

https://brainly.com/question/12211820#

#SPJ11

Answer:

the best player will make 57 the second best will make 54 and the third will make 48

Step-by-step explanation:

To find an equation for the drone's path, we can use the coordinates of the points it passes through to determine the equation of the circle. The equation of the drone's path is : (x - 25)^2 + (y + 200)^2 = 40625

Let's denote the drone's position as (x, y), with the origin (0, 0) representing the operator's location. The given information allows us to identify three points on the drone's path: Point A: (240, -170) - Located 240 meters east and 170 meters south of the operator. Point B: (-190, -230) - Located 190 meters west and 230 meters south of the operator. Point C: (0, 0) - The operator's location.

The equation for a circle can be written in the form (x - h)^2 + (y - k)^2 = r^2, where (h, k) represents the center of the circle, and r is the radius. To determine the center of the circle, we can find the coordinates of the midpoint between points A and B: Midpoint coordinates: ((240 - 190) / 2, (-170 - 230) / 2) = (25, -200). The center of the circle is (25, -200).

Next, we need to find the radius of the circle. The radius is the distance between the center of the circle and any point on the circle. We can use the distance formula to calculate the radius using point C as the reference point: Radius = sqrt((0 - 25)^2 + (0 - (-200))^2) = sqrt(25^2 + 200^2) = sqrt(625 + 40000) = sqrt(40625) = 201.56. The equation of the drone's path is thus: (x - 25)^2 + (y + 200)^2 = (201.56)^2. Simplifying further: (x - 25)^2 + (y + 200)^2 = 40625

To learn more about Midpoint, click here: brainly.com/question/30197001

#SPJ11

To find the abscissa of the midpoint of two points, we can use the midpoint formula. The midpoint formula states that the x-c coordinate of the midpoint is the average of the x-coordinates of the two points.

For the points A(-10, 19) and B(8, -10), the x-coordinate of the midpoint is calculated as follows: x-coordinate of midpoint = (x-coordinate of A + x-coordinate of B) / 2.  Substituting the values, we have: x-coordinate of midpoint = (-10 + 8) / 2

x-coordinate of midpoint = -2 / 2

x-coordinate of midpoint = -1

Therefore, the abscissa for the midpoint of A(-10, 19) and B(8, -10) is -1. This means that the midpoint lies on the vertical line with x-coordinate -1.

To Learn more about midpoint formula click here : brainly.com/question/17685913

#SPJ11

a) To sketch the graph of the function f(x) = {-2x), – 1 < x ≤ 1, we first observe that the function is defined piecewise.

For x values less than or equal to -1, the function is -2x. For x values greater than -1 and less than or equal to 1, the function is -1. b) To evaluate limx→-1 f(x) numerically, we substitute x values approaching -1 into the function. As x approaches -1 from the left side, we have f(x) = -2x, so limx→-1- f(x) = -2(-1) = 2. From the right side, as x approaches -1, f(x) = -1, so limx→-1+ f(x) = -1. Therefore, limx→-1 f(x) does not exist since the left-hand and right-hand limits do not match.

c) To evaluate limx→-1 f(x) algebraically, we refer to the piecewise definition of the function. As x approaches -1, we consider the values from the left and right sides. From the left side, as x approaches -1, f(x) = -2x, so limx→-1- f(x) = -2(-1) = 2. From the right side, as x approaches -1, f(x) = -1, so limx→-1+ f(x) = -1. Since the left-hand and right-hand limits are different, limx→-1 f(x) does not exist.

In conclusion, the graph of the function f(x) = {-2x), – 1 < x ≤ 1 consists of a downward-sloping line for x values less than or equal to -1 and a horizontal line at -1 for x values greater than -1 and less than or equal to 1. Numerically, limx→-1 f(x) does not exist as the left-hand and right-hand limits differ. Algebraically, the limit also does not exist due to the discrepancy between the left-hand and right-hand limits. This conclusion is supported by the graphical analysis of the function.

To learn more about downward-sloping line click here:

brainly.com/question/31813821

#SPJ11