please helpppp!!!
A tank containing 550 mL of oxygen has a pressure of 3.5 atms. If the pressure is changed to standard atmospheric pressure, approximately 1.0 atms, what will the resulting volume be?
help!!
Answers
Answer:1925ml
Explanation:
Do not quote me on this but with boyles law in mind as pressure tends to increase the volume of the container decreases. So I believe that you would need to multiply 550ml by the 3.5atm because p1v1=p2v2 so they both end up with the same end answer and if the pressure is 1.0atm then the answer would maybe be 1925ml. since 1*1925ml =1925ml and 3.5atm*550=1925ml (there is always a possibility this is wrong though)
Answer: the picture shows work for number 1,2,4,5,7
Explanation: number 3: as the pressure in the volume decreases, the volume increases causing it to expand and eventually blow.
number 6: because the temperature and the amount of gas don’t change, these terms don’t appear in the equation. What Boyle’s law means is that the volume of a mass of gas is inversely proportional to its pressure. This linear relationship between pressure and volume means doubling the volume of a given mass of gas decreases its pressure by half.
hope this helps :))
Related Questions
please help quickly!
for the first one ignore what i have pressed as i just guessed and it wont let me remove answers
Answers
Answer:
Iron II - pale green
Copper II - blue
Iron III - orange /brown
Nickel - green
Iron and Copper
‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️
Is this right? If not which is it pls
Answers
Answer:
i believe it is b as well
Explanation:
Sodium chloride can be produced from reacting sodium metal with chlorine gas. Carly reacts 2.6 g of sodium with 5.0 g of chlorine gas. She recovers 5.8 g of sodium chloride from the reaction. What is her percent yield? Carly's percent yield is ___ %
Answers
Answer:
87.75%
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
2Na + Cl₂ —> 2NaCl
Next, we shall determine the masses of Na and Cl₂ that reacted and the mass of NaCl produced from the balanced equation. This can be obtained as follow:
Molar mass of Na = 23 g/mol
Mass of Na from the balanced equation = 2 × 23 = 46 g
Molar mass of Cl₂ = 2 × 35. 5 = 71 g/mol
Mass of Cl₂ from the balanced equation = 1 × 71 = 71 g
Molar mass of NaCl = 23 + 35.5 = 58.5 g/mol
Mass of NaCl from the balanced equation = 2 × 58.5 = 117 g
Summary:
From the balanced equation above,
46 g of Na reacted with 71 g of Cl₂ to produce 117 g of NaCl.
Next, we shall determine the limiting reactant.
This can be obtained as follow:
From the balanced equation above,
46 g of Na reacted with 71 g of Cl₂.
Therefore, 2.6 g of Na will react with = (2.6 × 71)/46 = 4.01 g of Cl₂.
From the calculations made above, we can see that only 4.01 g of Cl₂ at of 5 g given in question reacted completely with 2.6 g of Na. Therefore, Na is the limiting reactant and Cl₂ is the excess reactant.
Next, we shall determine the theoretical yield of NaCl. The limiting reactant will be used to obtain the theoretical yield since all of it is consumed in the reaction.
The limiting reactant is Na and the theoretical yield of NaCl can be obtained as follow:
From the balanced equation above,
46 g of Na reacted to produce 117 g of NaCl.
Therefore, 2.6 g of Na will react to produce = (2.6 × 117)/46 = 6.61 g of NaCl.
Thus the theoretical yield of NaCl is 6.61 g
Finally, we shall determine the percentage yield of NaCl. This can be obtained as follow:
Actual yield of NaCl = 5.8 g
Theoretical yield of NaCl = 6.61 g
Percentage yield =?
Percentage yield = Actual yield /Theoretical yield × 100
Percentage yield = 5.8/6.61 ×100
Percentage yield of NaCl = 87.75%
What is the name of this formula MnN?
Answers
Date:
Why do scientists study fossils?
A.
to understand how volcanoes are formed
B.
to understand life on Earth as it was millions
of years ago
C.
to understand when mountains were created
Answers
Answer:
b
Explanation:
Answer:
I think ur answer would be B
Explanation:
Hope this helps
What percent of total energy consumption in the u.s in 2010 came from hydroelectric power? select the closest answer
Answers
Answer:
12% but u can put 8%
Explanation:
The process of moving water from its source to places where humans use it is called water diversion. true or false
Answers
Answer:
That is def true
Explanation:
Krista is conducting an investigation to determine how much water is best for her
sunflower plants. She uses five plants and gives each a different amount of water for six
weeks. Each week, she measures the height of each plant. She records her findings in the
chart below.
THE EFFECT OF WATER ON SUNFLOWER PLANTS
Week 1 Week 2 Week 3 Week 4 Week 5
Week 6
Amount of
water per
week
50 ml
100 ml
150 ml
200 ml
What information should be recorded below the weeks? (Hint: The dependent variable
should be recorded in the data chart.)
O the time it took each plant to reach a certain height
O the amount of water each plant received
o the amount of sun each plant received
O the height of each plant every week
Answers
Answer: Option D:The height of each plant every week
Explanation: In any experiment there are two variables one is independent variable and one is dependent variable.
One values of the experiment that can be changed is the independent variable that is amount of water given to the plants each week.
The values that cannot be changed and is dependent on independent variable is called dependent variable. This means that they change due to the change in the independent variable.
Here, the information that is to be recorded is the dependent variable. Height of each plant every week.
An Amazon box weighs 1000 grams and has a volume of 125 ml, what is its density
Answers
Answer:
80
Explanation:
ignore
URGENT!! Can someone help me with this?
A sample of oxygen gas has a volume of 2.1 L at 3.6 atm pressure and 200 K temperature.
What would the volume of this sample be at 1.0 atm and 400 K?
Answers
Answer:
15.1L
Explanation:
Given parameters:
Initial volume = 2.1L
Initial pressure = 3.6atm
Initial temperature = 200K
Final pressure = 1 atm
Final temperature = 400K
Unknown:
Final volume of the sample = ?
Solution:
To solve this problem, we are going to use the general gas law or the combined gas law which is expressed below:
[tex]\frac{P_{1} V_{1} }{T_{1} } = \frac{P_{2} V_{2} }{T_{2} }[/tex]
P, V and T are pressure, volume and temperature
1 and 2 are the initial and final states
Now;
[tex]\frac{2.1 x 3.6}{200}[/tex] = [tex]\frac{1 x V_{2} }{400}[/tex]
200V₂ = 3024
V₂ = 15.1L
Answer:
15.1L
Explanation:
Given parameters:
Initial volume = 2.1L
Initial pressure = 3.6atm
Initial temperature = 200K
Final pressure = 1 atm
Final temperature = 400K
Unknown:
Final volume of the sample = ?
Solution:
To solve this problem, we are going to use the general gas law or the combined gas law which is expressed below:
P, V and T are pressure, volume and temperature
1 and 2 are the initial and final states
Now;
=
200V₂ = 3024
V₂ = 15.1L
when a magnet is moved alongside a wire, what happens?
A. the electric movement stops
B. the protons move to the correct poles
C. the magnet repels like forces
D. the electrons in the wire begin to flow
Answers
Explanation:
D.the electrons in the wire begin to flow
how many moles of h20 are produced from 3 moles of oxygen?
Answers
Answer:
Stoichiometric Values in a Chemical Reaction
Explanation:
The coefficients next to the reactants and products are the stoichiometric values. They represent the number of moles of each compound that needs to react so that the reaction can go to completion.
Calculate the Ka for a 0.3 M solution of HA (unknown weak acid) if the pH = 3.65. The reaction can be modelled as HA (aq) + H2O (l) ←→ A- (aq) + H3O+ (aq).
Answers
The Ka : 1.671 x 10⁻⁷
Further explanationGiven
Reaction
HA (aq) + H2O (l) ←→ A- (aq) + H3O+ (aq).
0.3 M HA
pH = 3.65
Required
Ka
Solution
pH = - log [H3O+]
[tex]\tt [H_3O^+]=10^{-3.65}=2.239\times 10^{-4}[/tex]
ICE method :
HA (aq) ←→ A- (aq) + H3O+ (aq).
0.3 0 0
2.239.10⁻⁴ 2.239.10⁻⁴ 2.239.10⁻⁴
0.3-2.239.10⁻⁴ 2.239.10⁻⁴ 2.239.10⁻⁴
[tex]\tt Ka=\dfrac{[H_3O^+][A^-]}{[HA]}\\\\Ka=\dfrac{(2.239.10^{-4}){^2}}{0.3-2.239.10^{-4}}\\\\Ka=1.671\times 10^{-7}[/tex]
Identify each of the following as either an element or Compound. Write (E) for Element and (C)
for compound.
a. carbon
b. water
C. aluminum foil
d. plastic
e, tin
f. silicon dioxide
g. helium
h, arsenic
i. carbon dioxide
j. sodium chloride (table salt)
Answers
Carbon = C
Water = C
Aluminum foil = E
Plastic = E
Tin = E
Silicon dioxide = C
Helium = C
Arsenic = C
Carbon dioxide = C
Sodium Chloride = C
what happends if you pour 1 litre of water on the surface of the moon?will it bounce? serouse answer please !
Answers
Answer:
Explanation:
Diffuse water molecules can persist at the Moon's sunlit surface, as discovered by NASA's SOFIA observatory in 2020. Gradually water vapor is decomposed by sunlight, leaving hydrogen and oxygen lost to outer space. Scientists have found water ice in the cold, permanently shadowed craters at the Moon's poles.
Curicun, named for marie curie, has approximately 25 different isotopes that emit an alpha particle when their nuclei decay. If curium-247, the most abundant nuclide, emit and alpha particle, what daughter nuclide is formed?
Answers
Answer: The daughter nuclide formed is Plutonium -243
Explanation:
Alpha Decay: In this process, a heavier nuclei decays into lighter nuclei by releasing alpha particle. The mass number is reduced by 4 units and atomic number is reduced by 2 units.
[tex]^A_Z\textrm{X}\rightarrow ^{A-4}_{Z-2}\textrm{Y}+^4_2{\alpha}[/tex]
where A - mass number
Z - atomic number
X and Y are symbols of elements
For alpha decay of curium-247,
[tex]^{247}_{96}\textrm{Cm}\rightarrow ^{243}_{94}\textrm{Pu}+^4_2{\alpha}[/tex]
The daughter nuclide formed is Plutonium -243
PLEASE help due in 25 minutes
Determine the mass in grams of each of the following:
5.04 x 1024 atoms N
2.01 x 1024 atoms Ca
8.32 x 1021 atoms Sn
Determine the number of particles contained in each of the following:
50.3 g Cu
145g Si
0.67 g Cl
Answers
Answer:
method to do this given in explaination
Explanation:
divide the number of atoms with avagadro constant and multiply with the molar mass of each atom - to obtain the mass in g
divide the mass with molar mass and multiply with avagadro constant to obtain the number of particles
Which Body system works alone to maintain homeostasis? (pls help)
Answers
Answer:
circulatory system
Explanation:
Your circulatory system delivers oxygen-rich blood to your bones. Meanwhile, your bones are busy making new blood cells. Working together, these systems maintain internal stability and balance, otherwise known as homeostasis.
Which of the following statements are true about energy and bonds?
Check all that apply.
A. Energy is necessary for bond formation.
B. Breaking bonds does not absorb or release energy.
C. Breaking bonds takes energy.
D. When bonds are formed, energy is released.
Answers
Answer:
A. Energy is necessary for bond formation.
C. Breaking bonds takes energy.
D. When bonds are formed, energy is released.
Explanation:
Energy is always required for bond formation because when a chemical reaction occurs, either molecular bonds are broken or other bonds are formed to make different molecules. Energy is released during bond formation and is an exothermic process because bond formation represents a stable configuration and the energy lost is released as heat energy that makes it more stable.
Breaking bonds takes energy and is an endothermic reaction because energy is absorbed to break bonds.
Hence, the correct answer is "A. Energy is necessary for bond formation.
C. Breaking bonds takes energy.
D. When bonds are formed, energy is released."
How can you explain therma expansion in terms of kinetic energy ? please help
Answers
Answer:
Heat causes the molecules to move faster (heat energy is converted to kinetic energy), which means that the volume of a solid or a liquid. ... The particles in the air do not have more kinetic energy than particles in the mercury, because they are the same.
Explanation:
I hope this help you!
How would one convert 5 decades to months (1 decade = 10 years)?
Answers
Answer:
A decade is 10 years. Therefore you must first multiply ten by five to get 50. After you multiply the 12 months in a year by the 50 years. Your answer should be 600
Explanation:
Answer:its d
Explanation:just took it
Which statement is true of inclusions?
A. They are older than the rocks that contain them.
B. They are younger than the rocks that contain them.
C. They are the same age as the rocks that contain them.
Answers
10. Which best describes the purpose of food?
A
to kill bacteria
s. to prevent disease
c. to eliminate waste materials
o. to provide fuel for cell processes
Answers
Answer:
10. Which best describes the purpose of food? to kill bacteria
. to prevent disease
which of the following is a compound A. Iron B. Alloy C. rock salt D. sugar
Answers
Answer:
I think iron sorry if its wrong goodluck!
Balance Na2CrO4 + AlPO4
Answers
Answer:
2Na3PO4 + Al2(CrO4)3
Explanation:
these are the products
The balanced equation is 3 Na₂CrO₄ + 3 AlPO₄ ⇒ 2 Na₃PO₄ + Al₂(CrO₄)₃.
Let's consider the unbalanced chemical equation that occurs between Na₂CrO₄ and AlPO₄. This is a double displacement reaction.
Na₂CrO₄ + AlPO₄ ⇒ Na₃PO₄ + Al₂(CrO₄)₃
We will balance it using the trial and error method.
First, we will balance Na atoms by multiplying Na₂CrO₄ by 3 and Na₃PO₄ by 2.
3 Na₂CrO₄ + AlPO₄ ⇒ 2 Na₃PO₄ + Al₂(CrO₄)₃
Finally, we get the balanced equation by multiplying AlPO₄ by 3.
3 Na₂CrO₄ + 3 AlPO₄ ⇒ 2 Na₃PO₄ + Al₂(CrO₄)₃
The balanced equation is 3 Na₂CrO₄ + 3 AlPO₄ ⇒ 2 Na₃PO₄ + Al₂(CrO₄)₃.
You can learn more about balancing equations here: https://brainly.com/question/7181548
DESPERATE WILL GIVE BRAINLIST
Meiosis produces diploid cells.
True
False
Answers
Answer:
FalseMeiosis produces 4 haploid cells. Mitosis produces 2 diploid cells. The old name for meiosis was reduction/ division. Meiosis I reduces the ploidy level from 2n to n (reduction) while Meiosis II divides the remaining set of chromosomes in a mitosis-like process (division).Explanation:
Hope it helps
Answer:
False
Explanation:
Mitosis creates diploid cells, meiosis creates haploid cells.
Two ions have a different number of
Answers
Answer:
Explanation:
Isotopes differ in the number of neutrons; in ions the number of electrons is different from the number of protons. Isotopes are atoms that have the same number of protons but different numbers of neutrons.
What is the percent yield of lithium hydroxide from a reaction of 7.40 g of lithium with 10.2 g of water? The actual yield was measured to be 12.1 g.
2Li(s) + 2H2O(l) = 2LiOH(aq) + H2(g)
Select one:
a. 72.5%
b. 53.1%
c. 89.3%
d. 47.4%
Answers
Answer: d. 47.4%
What is the percent yield of lithium hydroxide from a reaction of 7.40 g of lithium with 10.2 g of water? The actual yield was measured to be 12.1 g.
which two planets have the same density ?
Answers
Answer:
Uranus and Neptune
Explanation:
What involves 2 non metals ionic or covalent bonds
Answers
Answer:
A bond forms between two non metals is covalent
Explanation:
For example Chlorine Cl is a non metal bond in Cl - Cl is covalent