Answer:
Leg length
Explanation:
The distances from the root to the edges of the legs (toes) and the height of the crown are basic measurements.
Which explanation best identifies why the company in the following scenario has decided against investing in solar energy?
A company in Miami, Florida, is considering an alternative energy source in order to cut down on its fuel costs. The company has thought about solar energy but has decided against it for the time being.
The company found the negative environmental effects of solar energy disheartening.
The company found the amount of sunlight in the area unreliable.
The company found the cost of the required photovoltaic cells too expensive.
The company found the natural resources used in solar energy too limited.
Answer:
The company found the cost of the required photovoltaic cells too expensive.
Explanation:
Solar energy can be used as an alternative source of supply for fuel. Solar energy is a renewable source of energy, that is it keeps on replenishing every day. Also solar energy does not require a lot of maintenance.
The cost required is starting a solar system is very high because one needs to buy solar panel, photovoltaic cells for batteries, inverters and so on.
From the question, the company decided against solar energy for the time being. This means that probably in the future they might consider it. Therefore it is as a result of the economic situation of the company that they have not set up a solar system because the cost of the required photovoltaic cells too expensive.
Find the mechanical average of a wheel axle System of the wheel has a radius of 1.5 feet in the accident has a radius of 6 inches if the force is put on a axle
Answer:
Mechanical average of a wheel = 3
Explanation:
Given:
Radius of wheel = 1.5 ft = 1.5 x 12 = 18 inches
Radius of axle = 6 inches
Find:
Mechanical average of a wheel
Computation:
Mechanical average of a wheel = Radius of wheel / Radius of axle
Mechanical average of a wheel = 18 / 6
Mechanical average of a wheel = 3
When Hailey participated in a tree plantation drive, she wore her most comfortable loungewear. However, the same attire was not acceptable at her workplace. Why?
Hailey’s attire was not acceptable because...
1. Her attire was not neat or clean
2. Her attire was not
appropriate for her profession
3. She wore the wrong outfit for the tree plantation drive
4. Her colleagues were just jealous of her attire
Someone who has the knowledge and experience to handle problems is a
What is a building? Peeps I need help
A building is a building
i like the tree in the background my dear child
-Pilar
What is the name for a program based on the way your brain works?
Answer:
KAT
Explanation:
I believe this is what ur looking for
According to the
simple machine below, which part of the system is
considered the resistance force? *
2 points
A
B
Answer:
The part of the system that is considered the resistance force is;
B
Explanation:
The simple machine is a system of pulley that has two pulleys
The effort, which is the input force at A gives the value of the tension at C and D which are used to lift the load B
Therefore, we have;
A = C = D
B = C + D = C + C = 2·C
∴ C = B/2
We have;
C = B/2 = A
Therefore, with the pulley only a force, A equivalent to half the weight, B, of the load is required to lift the load, B
The resistance force is the constant force in the system that that requires an input force to overcome in order for work to be done
It is the force acting to oppose the sum of the other forces system, such as a force acting in opposition to an input force
Therefore, the resistance force is the load force, B, for which the input force, A, is required in order for the load to be lifted.
FRAME "WH"QUESTION
1.i am planning to relocate to canada in2020(where)
Answer:
It purely depends what type of lifestyle you want.
Explanation:
If you like the city, then moving to Toronto ir Vancouver or Montreal might work. Quebec might be difficult due to the language barrier. You can also locate to the suburbs near these cities.
What are the disadvantages of having a liquid cooled engine?
What are some goals of NYFEA? Select three options.
encouraging political involvement
educating children
developing agricultural leaders
encouraging new and young farmers
developing medical treatments
encouraging small farms
Answer:
developing agricultural leaders
encouraging new and young farmers
encouraging small farms
Answer:
3
4
6
Explanation:
If you have 300 skittles in a bag and you need to have 28 percent yellow. How many yellow skittles would you have to make a minimum of 28 percent in the bag?
Answer:
im trying to do a challenge because this kid deleted all my answers
Explanation:
Which of the following sentences uses the active voice
Answer: Last week, Nate and I counted all the inventory.
Explanation: all other choices are passive voices
this sentence follows a clear subject + verb + object construct that's why it is an active voice. In fact, sentences constructed in the active voice add impact to your writing. but on the other hand With passive voice, the subject is acted upon by the verb.
Ape x
Answer:
Last week, Nate and I counted all the inventory.
Explanation:
During mechanical cleaning, the container should be grounded to
minimize the possibility of static charge buildup and spark
True
O False
A car battery is a 12V DC source. Typically you will find a fuse that can handle a 7 amp surge to power on the lights in your car. What resistance is that fuse protecting?*'
Answer:
resistance=power/current=12/7=1.71ohm
When engineers develop a model, which step in the engineering process is
taking place
Answer: Design a solution or problem
Explanation:
When engineers develop a model, the step that is taking place in the engineering process is referred to as the design a solution or problem step.
This is when engineers tackles and solved a problem by finding solutions and this is done by incorporating their analytical, and synthetic thinking and using their skills an experience.
Engineering models are used create a simulation intended to solve real world problems. Hence, the process of developing a model describes designing a solution.
To solve a particular problem in the real world, the use of engineering modeling softwares or programs which are embedded with mathematical and environmental parameters are utilized to create a design of the phenomenon in other to prepare a simulated process to test the effectiveness of their work before deployment.
Therefore, developing a model describes the process of designing a solution.
Learn more : https://brainly.com/question/16033358
What are examples of Quality Assurance workplaces? Check all that apply.
laboratories
vehicles
design studios
factories
stores
offices
Answer: laboratories, factories, offices
Explanation:
Answer:
b and on edg
Explanation:
and have a good day
the manufacturer specifies that a terminal lug be torqued to 7.5 foot-lbs but your to calibrated in inch-pounds, you would set your wrench at in. Ib. Select one O a. 90 O b. 1.6 O c. 7.5 O d. 37.5 e kone of these
Which of the following describes what should happen before a home is designed?
Answer:
A
Explanation:
6. What is the Density of a block that has a mass of 82lbs in a block with a
volume of 6in^3*
1 point
13.6lbs/in^3
O 36/bs/in
8lbs/in^3
O 13.6lbs/in"2
Answer:
[tex]d=13.6\ lbs/in^3[/tex]
Explanation:
Given that,
Mass of a block, m = 82 lbs
Volume of the block, V = 6 inch³
We need to find the density of the block. Density of an object is equal to the mass per unit its volume. So,
[tex]d=\dfrac{m}{V}\\\\d=\dfrac{82\ lbs}{6\ in^3}\\\\=13.6\ lbs/in^3[/tex]
So, the required density is [tex]13.6\ lbs/in^3[/tex].
Jeff is currently working at a construction site for a shopping mall. His job is to determine labor costs and negotiate prices of various raw materials from different contractors. What is Jeff's designation?
a. Coordinator
b. Estimator
c. Superintendent
d. Surveyor
Answer:
b. Estimator
Explanation:
PLZ ASAP WILL GIVE BRAINLIST
Click this link to view O*NET’s Work Activities section for Personal Financial Advisors. Note that common activities are listed toward the top, and less common activities are listed toward the bottom. According to O*NET, what are some common work activities performed by Personal Financial Advisors? Check all that apply.
interacting with computers
making decisions and solving problems
evaluating information
performing general physical activities
handling and moving objects
getting information
Answer: A, B, C & F (interacting w computers, making decisions & solving problems, evaluating information & getting information).
Explanation: Those are the correct & verified answers.
Answer:
a b c f
Explanation:
is correct edge 2021
Hope this helps!
In the pressure filled driving environment, handicapping yourself by drinking and driving is not a good choice.
a) true
b) false
Answer:
True
Explanation:
Please mark me brainlist
Search and destroy christian
Answer: ummmm wut?
Explanation:
Answer:
the song?
Explanation:
product innovation is driven by what?
Answer:
Market
Competition
Products innovation strategy
A quantity of gas has a pressure of 1.39 atm and a volume of 6.95 L. What is the
volume of this gas when the pressure is changed to 740 mm Hg?
Answer:
The volume of the quantity of gas when the pressure changes to 740 mm Hg is approximately 9.92 L
Explanation:
The properties of the quantity of gas are;
The initial pressure of the gas, P₁ = 1.39 atm
The initial volume of the given volume of gas, V₁ = 6.95 L
The final pressure of the quantity of gas, P₂ = 740 mmHg
Boyle's Law states that at constant temperature, the pressure, P, of a given mass of gas is inversely proportional to its volume, V
Mathematically Boyle's Law can be written as follows;
[tex]P \propto \dfrac{1}{V}[/tex]
Therefore, we have;
P₁·V₁ = P₂·V₂
Where;
V₂ = The final volume of the quantity of gas when the pressure changes to 740 mm Hg
[tex]\therefore V_2 = \dfrac{P_1 \cdot V_1}{P_2}[/tex]
By substituting the known values, we have;
[tex]V_2 = \dfrac{1.39 \ atm \times 6.95 \ L}{740 \ mmHg} = \dfrac{1.39 \ atm \times 6.95 \ L}{0.973521 \ atm} = 9.92159459459 \ L \approx 9.92 \ L[/tex]
The final volume of the quantity of gas when the pressure changes to 740 mm Hg = V₂ ≈ 9.92 L
Type the correct answer in the box. Spell all words correctly.
What kind of job does Malcolm have?
Malcolm works as a/n (blank)
engineer with a company that manufactures automotive spare parts. His job is to examine product
components for flaws and communicate their results to other team members.
Answer:
management engineer
Explanation:
A Management Engineer is someone with a commercial engineering understanding and marketing techniques.
The role of a management engineer covers overseeing the activities of all the engineering departments in an engineering firm particularly in the area of product development, implementation, and production.
This is to ensure the products meet and satisfy the business methods and techniques specifically in the area of cost efficiency and quality product.
Under Management Engineering there are subdivisions of Manufacturing and Industrial Engineer, which both fit the role of Malcolm.
Hence, in this case, Malcolm work as a Management Engineer
Can you give me examples of reciprocating motion?
Answer: See explanation
Explanation:
Reciprocating motion, is simply referred to as a linear motion that there's repetitions of it's movement which can be either back-and-forth or up-and-down.
Examples of reciprocating motion are roller pressure, insertion machines, conveyor diverters, piston pumps etc
Please help me with this. Plzzz.
Answer:
450,000m = 450km = 4.5E5
32,600,000W = 32.6MW = 3.26E7
59,700,000,000cal = 59.7Gcal = 5.97E10
0.000000083s = 83ns = 8.3E-8
35,000Ω = 35kΩ = 3.5E4
Explanation:
Giga = 1,000,000,000
Mega = 1,000,000
kilo = 1,000
unit = 1
deci = .1
centi = .01
milli = .001
micro = .000001
nano = .0000000001
pico = .000000000001
You should be able to look at these and convert between them in seconds if you want to pursue anything in engineering.
Dominic applies for a job in a robotics firm. One of the points in the job description is to have a good understanding of electronics. The job description also mentions that the job includes assembling of electronic and mechanical parts of robots. For which job position is Dominic applying? A. automation engineer B. robotics technologist C. software quality specialist D. robotics software engineer
Answer:
I Think It Is B
Explanation:
Because
The job position for which she is applying for is robotics technologist. The correct option is B.
What is robotics technologist?Technicians in robotics install, service, maintain, troubleshoot, and repair robots and automated manufacturing systems.
They must be familiar with computers, electrical and electronic systems, sensor and feedback principles, and the operation of robots as machines.
Most companies require a bachelor's degree in a robotics-related field such as mechanical engineering, electrical engineering, computer science, or mathematics.
In addition to your degree, you must have knowledge and hands-on experience in the area of Computer-Aided Design/Manufacturing (CAD/M).
Dominic is applying for a job in a robotics company. One of the requirements of the job is a solid understanding of electronics.
The job description also states that the job entails assembling electronic and mechanical robot parts. She is applying for the position of robotics technician.
Thus, the correct option is B.
For more details regarding robotics, visit:
https://brainly.com/question/1287488
#SPJ2
Which of the following describes the most direct and attainable way to reduce pollution in the environment?
increasing research to find alternative natural resources for the future
making practical decisions about using natural resources and energy
basing new sources of power only on perpetual resources
requiring organizations to use only sustainable resources
Answer:
i think its A. increasing research to find alternative natural resources for the future
Answer:
making practical decisions about using natural resources and energy
Explanation: