QUICK WILL MARK BRAINLIEST
As light shines from air to water, the index of refraction is 1.02 and the angle of
incidence is 38.0 °. What is the light's angle of refraction?

29.8°
32.5°
37.1°
39.8°

Answer:

Equal effort force

Explanation:

A class 1 lever has the support between the load and the effort hence the load tilts the plain at one end containing the support we would require an effort equal and opposite to the load to ensure movement .

Answer:  Force per unit area. Explanation: P = 25/20. P = 5/4 Pascal or 1.25 Pascal

Explanation: is this what you were looking for

Answer:

A resistor is a battery

Answer:

The answer is A

Explanation:

A resistor is a light bulb because it is the flow of an electric current in an electric circuit.

Explanation:

In uniform gravity it is the same as the centre of mass. For regular shaped bodies it lies at the centre of the that particular body. Hence for a cylinder centre of gravity lies at the midpoint of the axis of the cylinder.

Explanation:

We developed a spherical harmonic series that represents the gravitational potential and its gravity field due to a buried right vertical cylinder. This series can be used at far- and intermediate-regions, and is fast and accurate, using only a few terms. We compared the values of the fields acquired by this new spherical harmonic series, with ones computed by direct numerical integrations, using a fine-mesh structure for a vertical cylinder. Results of the calculations are shown and performances of the two different methods are compared. Faithfulness of the spherical harmonic series is tested with an inversion example.

Answer:

The rubber will expand to its maximum and then tear in the middle.

Explanation:

Answer:

Hey!

Well if they continue to pull the rubber band, it would eventually rip apart right in the middle as the force could not be contained by the elastic fibres and had reached its maximum extension!

Explanation:

HOPE THIS HELPS!!

Answer:

The water particles move in the same direction as the vibrating source of the sound wave. ... What best describes the waves produced by the tuning fork? mechanical, because the vibrating tuning fork makes air molecules around it vibrate. A wave is produced in a Slinky as shown.

Explanation:

Answer:

mechanical, because the vibrating tuning fork makes air molecules around it vibrate

Explanation:

Answer:

[tex]\mathbf{\dfrac{I(5l)}{I(l) } =10^{-8}}[/tex]

Explanation:

We are being told that the current is proportional to the tunneling coefficient[tex]I(l) = I_0 e^{-2kl}[/tex] ;

where l = distance between the tip and the surface.

Let      [tex]I(l) = I_0 e^{-2kl}[/tex]        ------------  equation (1)

and     [tex]I(5l) = I_0 e^{-2k(5l)}[/tex]   ------------ equation (2)

Dividing equation (2) by (1); we have :

[tex]\dfrac{I(5l)}{I(l) } = \dfrac{I_0 e^{-2k(5l)}}{ I_0 e^{-2kl}}[/tex]

[tex]\dfrac{I(5l)}{I(l) } =e^{-2k(5-1)l}[/tex]

[tex]\dfrac{I(5l)}{I(l) } =(e^{-2kl})^4[/tex]

where ;

[tex](e^{-2kl})[/tex] represents the transmission coefficient T = 0.01

Thus; replacing the value for 0.01;we have;

[tex]\dfrac{I(5l)}{I(l) } =0.01^4[/tex]

[tex]\mathbf{\dfrac{I(5l)}{I(l) } =10^{-8}}[/tex]

Answer:

A. Pu -239

Explanation:

An isotope is an element with the same atomic number but different mass number. most isotope are unstable, having short half life.

Curium-242 is an isotope produced when Plutonium 239 is bombarded by an alpha particle. This reaction between Plutonium 239 and alpha particle gives curium-242, neutron and a high amount of energy as the products.

Curium oxidizes easily, and it is a dangerous metal which can cause cancer initiation when absorbed by biological materials e.g bones or tissue.

party and being happy..........

Answer:

475 J

Explanation:

Kinetic energy is calculated by one half of the product of mass and velocity squared or expressed as:

KE = 1/2 (mv²)

We calculate as follows:

KE1 = 1/2 (mv²) = 1.9 * 10^3 joules

KE2 = 1/2 (m(v/2)²) = 1/2 (mv²/4)

KE2 =  1.9 * 10^3 joules / 4 = 475 J

Answer:

1,650 meters

Explanation:

Start by converting the velocity to m/s. There are 3600 seconds in a minute and 1000 meters in a kilometer, so 90km/hr=25m/s. Half a minute is 30 seconds, so:

[tex]d=v_ot+\dfrac{1}{2}at^2 \\\\d=(25)(30)+\dfrac{1}{2}(2)(30)^2 \\\\d=750+900=1650m[/tex]

Hope this helps!

Answer :

.changing chemical energy to thermal energy

.changing nuclear energy to radiant energy

Explanation :

Answer:

.changing chemical energy to thermal energy

.changing nuclear energy to radiant energy

Explanation:

Answer:the answer is B

Explanation:

APE X

The technology that is based on the work of Subrahmanyan Chandrasekhar is an orbiting observatory to detect X-rays from space objects, therefore the correct option is B.

Chandrasekhar's limit is a type of maximum limited value that is used to define the maximum mass of a white dwarf star. The generally internationally considered value of the Chandrasekhar limit is about 1.44 times the mass of the sun which is approximately 2.765×10³⁰ kg.

In other words, one can say that Chandrasekhar limit is the maximum value that can attain 1.44 times the solar mass.

In other words, one can say that star with a mass more than 1.44 times that of the Sun does not form a white dwarf but  continues to collapse, finally forming a neutron star

An orbiting observatory to detect X-rays from space objects is based on the principle of Chandrasekhar's limit. The correct option is B.

Learn more about Chandrasekhar's limit from here

https://brainly.com/question/7259500

#SPJ2

Answer:

1. B = 79.12 MeV

2. B = -4.39 MeV/nucleon

3. B = 2.40 MeV/nucleon

4. B = 7.48 MeV/nucleon

5. B = -18.72 MeV

6. B = 225.23 MeV            

Explanation:

The binding energy can be calculated using the followng equation:

[tex] B = (Zm_{p} + Nm_{n} - M)*931 MeV/C^{2} [/tex]

Where:

Z: is the number of protons

[tex]m_{p}[/tex]: is the proton's mass = 1.00730 u

N: is the number of neutrons

[tex]m_{n}[/tex]: is the neutron's mass = 1.00869 u

M: is the mass of the nucleus

1. The total binding energy of [tex]^{12}_{6}C[/tex] is:

[tex] B = (Zm_{p} + Nm_{n} - M)*931.49 MeV/u [/tex]

[tex] B = (6*1.00730 + 6*1.00869 - 12.011)*931.49 MeV/u = 79.12 MeV [/tex]

2. The average binding energy per nucleon of [tex]^{24}_{12}Mg[/tex] is:

[tex] B = \frac{(Zm_{p} + Nm_{n} - M)}{A}*931.49 MeV/u [/tex]

Where: A = Z + N

[tex] B = \frac{(12*1.00730 + 12*1.00869 - 24.305)}{(12 + 12)}*931.49 MeV/u = -4.39 MeV/nucleon [/tex]                                  

3. The average binding energy per nucleon of [tex]^{85}_{37}Rb[/tex] is:

[tex] B = \frac{(Zm_{p} + Nm_{n} - M)}{A}*931.49 MeV/u [/tex]

[tex] B = \frac{(37*1.00730 + 48*1.00869 - 85.468)}{85}*931.49 MeV/u = 2.40 MeV/nucleon [/tex]

4. The binding energy per nucleon of [tex]^{238}_{92}U[/tex] is:

[tex] B = \frac{(92*1.00730 + 146*1.00869 - 238.03)}{238}*931.49 MeV/u = 7.48 MeV/nucleon [/tex]

5. The total binding energy of [tex]^{20}_{10}Ne[/tex] is:

[tex] B = (Zm_{p} + Nm_{n} - M)*931.49 MeV/u [/tex]

[tex] B = (10*1.00730 + 10*1.00869 - 20.180)*931.49 MeV/u = -18.72 MeV [/tex]

6. The total binding energy of [tex]^{40}_{20}Ca[/tex] is:

[tex] B = (Zm_{p} + Nm_{n} - M)*931.49 MeV/u [/tex]

[tex] B = (20*1.00730 + 20*1.00869 - 40.078)*931.49 MeV/u = 225.23 MeV [/tex]

I hope it helps you!

Answer:

∆p = 20 kg * m/s

Explanation:

The change in momentum is the mass of the body multiplied by the change in its velocity.

In formula form ∆p = m * ( ∆v ).

with m = 5 kg and ∆v = 4 m/s

∆p = 5 kg * 4 m/s

∆p = 20 kg * m/s

The pendulum has the greatest speed as it passes through the lowest position, straight down, where it was hanging limply before you started it swinging.

Answer:

4.29 s

Explanation:

Given:

v₀ = 0 m/s

v = 30.0 m/s

a = 7.00 m/s²

Find: t

v = at + v₀

30.0 m/s = (7.00 m/s²) t + 0 m/s

t = 4.29 s

Answer: 35

Explanation:

Given the following :

M = 0.5 kg

Power of heater = 100W

From the graph ;

Time (t) = 7seconds

Change in temperature(Dt) = t2 - t1

Where t2 = 70°C, t1 = 30°C

Dt = (70 - 30)°C = 40°C

Recall Q = iVt

IV = power

Q = mcDt

c = specific heat capacity of liquid

mcDt = ivt

mcDt = power × t

0.5 × c × 40°C = 100 × 7

20°C × c = 700 J

c = 700 J/ 20°C

c = 35 J / kg°C

Answer:

9.45 kWh

Explanation:

Energy = Power × time

E = 900 W × (1.5 h/day × 7 day)

E = 9450 Wh

E = 9.45 kWh

Answer:

5 Ω

Explanation:

When it is bent into a square, each side of the square will get 5 Ω resistance. As considered diagonally ,path of the wire between to diagonal points is the two sides of the square (that is half the length of the wire connected in parallel position). Which gives 10 ohm parallel to 10 ohm wire. So it finally read as 5 Ω wire

Answer:

Los datos que tienes son:

m = 13 kg

d = 46 m

∪ = 0,45

g = 9,8 m/s²

Fr = ? 

w = ? 

Lo primero que haremos que calcular Fr

Fr = ∪mg

Fr = (0,45) (13 kg) (9,8 m/s²)

Fr = 57,33 N

Calculamos el trabajo realizado.

w = Fd

w = (57,33 N) (46 m)

w = 2637,18 Joules

Respuesta.

El trabajo realizado es 2637,18 Joules

Explanation:

Answer:

Voltage.

Explanation:

Answer: The answer is 700kg

Explanation:

Explanation:What is centripetal acceleration?

Can an object accelerate if it's moving with constant speed? Yup! Many people find this counter-intuitive at first because they forget that changes in the direction of motion of an object—even if the object is maintaining a constant speed—still count as acceleration.

Acceleration is a change in velocity, either in its magnitude—i.e., speed—or in its direction, or both. In uniform circular motion, the direction of the velocity changes constantly, so there is always an associated acceleration, even though the speed might be constant. You experience this acceleration yourself when you turn a corner in your car—if you hold the wheel steady during a turn and move at constant speed, you are in uniform circular motion. What you notice is a sideways acceleration because you and the car are changing direction. The sharper the curve and the greater your speed, the more noticeable this acceleration will become. In this section we'll examine the direction and magnitude of that acceleration.

The figure below shows an object moving in a circular path at constant speed. The direction of the instantaneous velocity is shown at two points along the path. Acceleration is in the direction of the change in velocity, which points directly toward the center of rotation—the center of the circular path. This direction is shown with the vector diagram in the figure. We call the acceleration of an object moving in uniform circular motion—resulting from a net external force—the centripetal acceleration

a

c

a

c

​

a, start subscript, c, end subscript; centripetal means “toward the center” or “center seeking”.

Answer:

m = 1,975 m / kg , b = 38.05 m

Explanation:

In this experiment, the elongation is plotted against the applied mass

getting a straight line

            y = m x + b

where b would be the initial length of spring let's calculate the slope for which we use two well separated points

           m = (56.3 -48.4) / (8 - 4)

           m = 1,975 m / kg

the equation remains

         y = 1,975 x + b

for x = 2 kg y = 42.0 m

we substitute in the equation

           42 = 1,975 2 + b

           b = 42 - 3.95

           b = 38.05 m

Given that,

Mass of water = 1.26 kg

Latent heat of vaporization of water [tex]L=2.26\times10^{6}\ J/kg[/tex]

We need to calculate the latent heat

Using formula of latent heat

[tex]Q=mL[/tex]

Where, Q = energy

m = mass

L = latent heat of vaporization

Put the value into the formula

[tex]Q=1.26\times2.26\times10^{6}[/tex]

[tex]Q=2847600\ J[/tex]

[tex]Q=2.84\times10^{6}\ J[/tex]

The temperature changes liquid to steam.

So, The temperature will be increases.

Hence, The latent heat is [tex]2.84\times10^{6}\ J[/tex] and temperature increases.

Answer:

latent heat = 2.84 x 10^6

and the temperature increase

Explanation:

Answer:

convection

Explanation:

because in convection, molecules move with heat(i.e wind). So, when molecules move to another place, the mass will be reduce and the density will change