Answer:
Do not try to re-light or handle malfunctioning fireworks. Soak both spent and unused fireworks in water for a few hours before discarding.
A copper rod takes up 75 mL of space. With a density of 8.96 g/mL, what is the mass of the rod
Electromagnetic waves will travel the SAME SPEED (speed of light) WITHIN a medium as it does WITHOUT a medium. Question options: True False
Answer:
True
Explanation:
The speed that electromagnetic waves will travel within any medium is the same as those without a medium. The speed of electromagnetic wave is a constant and does not depend on the material of the medium.
Electromagnetic waves are waves that do not require a material medium for their propagation. They are able to pass through vacuums and mediums with particles at constant speed. It is mechanical waves whose speed is medium dependent. Mechanical waves have varying speed based on the mediums they move through.HELP ME PLSSSS
Which *TWO* statements explain ways in which cells get nutrients
A. The nucleus provides the instructions for making proteins from amino acids.
B. Mitochondria change energy stored in organic compounds into a usable form
C. Transport proteins help molecules cross cell membranes.
D. A chloroplast converts energy from sunlight into organic matter
Answer:
i am not sure but
Explanation:
b and c should be correct
Answer:b and D
Explanation:
How many electrons are transferred in total in this
reaction?
2 NH3 + 2 O2 – N2O + 3 H2O
4 electrons
10 electrons
8 electrons
6 electrons
Answer:
10.
....................
.......
12. If the particles of a liquid are always moving, why don't they all come apart from each other and become a gas?
Answer:
even though the particles of a liquid are moving, they are attracted to each other so they don't spread far apart to become a gas.
Explanation:
"but some do when they evaporate"
In liquids, the particles are allowed to move freely rather than the solid. The gaseous particles can move more freely than liquids.
Particles in liquids:In liquids, the particles are placed randomly and thus are allowed to move freely but they do not become a gas as liquids are slightly less compressible than gases. Even though the particles of a liquid are moving, they are attracted to each other so they don't just spread far apart to become a gas.
Find more information about Liquids here:
brainly.com/question/752663
Describe what happens to kinetic energy of the molecules when temperature increases.
Answer:
When the temperature of an object increases, the average kinetic energy of its particles increases. When the average kinetic energy of its particles increases, the object's thermal energy increases. Therefore, the thermal energy of an object increases as its temperature increases.
Explanation:
That is all I know.
7. Which of the following is unlikely to
happen to zinc?
A) It is rolled into sheets.
B) It is used to coat a steel hull.
C) It is used in a battery.
D) It is used as an insulator.
Answer:D) it is used as an insulator
Explanation:
Which things are larger than cells? Put an X next to (or highlight) the things that are generally larger than a typical animal or plant cell.
_____thickness of a leaf ____grain of salt
_____atom _____protein molecule
_____width of hair x DNA
_____piece of sawdust _____eye of an ant
_____Water molecule _____tiny seed
_____bread crumb _____larva of a tiny fruit fly
_____bacteria _____period at end of sentence _____ virus
_____speck of pepper _____chromosome _____ frog embryo _____dust mite _____point of a pin _____ flea egg
Answer:
Explanation:
x thickness of a leaf x grain of salt
_____atom _____protein molecule
x width of hair x DNA
x piece of sawdust x eye of an ant
_____Water molecule x tiny seed
x bread crumb x larva of a tiny fruit fly
x bacteria x period at end of sentence _____ virus
x speck of pepper _____chromosome x frog embryo x dust mite xpoint of a pin x flea egg
what particle joins or bonds atoms to form a compound or molecule
Level 1: You are attempting to identify an unknown substance. Use the table to
answer the questions below.
Substance
Formula
Mass,
Color
Physical
State
Density Boiling
. (g/cm) Point,
Methane
CH
16.0
Gas
Colorless
0.423
-161.5
Ammonia
NH,
17.0
Gas
Colorless
0.70
-33
Unknown
???
???
???
???
???
???
Propane
CH
Gas
Colorless
0.493
-42.1
Bromine
Br.
159.8
Liquid
Red
4.04
58.8
Lithium
Li
6.94
Solid
0.534
1342
Silvery,
white
metal
Magnesium Mg
24.3
Solid
1.74
1090
Silver,
white
metal
identify the molar mass of na2(so4)3
Answer:
142.04 g/mol is the answer to your question.
You
2. An all natural mosquito repellent
is trying to make its way into the
market. One arm is sprayed with the
repellent and one arm is not sprayed
with anything. After 3 hours, the
number of mosquito bites is counted. What is the control group
Answer:
The arm that was not sprayed with anything
Explanation:
The control group would be the arm that was not sprayed with anything.
The control group during an experiment is a group that forms the baseline for comparison in other to determine the effects of a treatment. The control group does not include the variable that is being tested and as such, it provides the benchmark to measure the effects of the tested variable on the other group - the experimental group. In this case, the experimental group would be the arm that was sprayed with the repellent.
Mention any three ways of making salt. (please help me Asap)
The final temperature and pressure in a container is 234K at 210 kPa.
If initial temperature was 175 K, what was the starting pressure?
Answer:
Initial pressure = 157 kpa (Approx)
Explanation:
Given:
final temperature = 234 K
final pressure = 210 kpa
Initial temperature = 175 K
Find:
Initial pressure
Computation:
Initial pressure / Initial temperature = final pressure / final temperature
Initial pressure / 175 = 210 / 234
Initial pressure = 157 kpa (Approx)
1. Under what conditions can potassium bromide conduct electricity?
A only when melted
B. when melted or dissolved in water
C. only when it is in crystal form
D. only when dissolved
Answer:
potassium bromide can only conduct electricity when in an aqueous solution due to the electrostatic force between the ionic bonds
The potassium bromide can conduct electricity when melted or dissolved in water. Therefore, option (B) is correct.
What are ionic compounds?The crystalline solids which are formed by closely packed ions of opposite charge are called ionic compounds. In ionic compounds, the ions are connected with each other by ionic bonds in solis state.
The elements which can gain or lose electrons to attain their nearest noble gas configuration participate in the formation of ionic compounds. The solid ionic compound cannot able to conduct electricity.
In the melted state, the ions of K⁺ and Br⁻ can move from their fixed positions. Therefore, the KBr can conduct electricity when melted or dissolved in water.
The ionic compounds are able to conduct electricity in melted or dissolved in water. Because only in these states the ins can move freely while in the crystalline state the ions cannot move freely to conduct electricity.
Learn more about ionic compounds, here:
https://brainly.com/question/9167977
#SPJ6
As you were climbing a a mountain, you noticed that rocks were crumbling below your feet and moving down the mountain. What two processes did you observe?
Answer:
Weathering and erosion
Explanation:
Weathering can be explained as the breaking down of rocks/minerals on the surface of the Earth as a result of contact with biological organism, water, air and other factors
. There are 3 common types of weathering which are;
1) physical weathering
2) biological weathering
3) chemical weathering
Erosion can be regarded as a geological process, whereby earthen material are been transported away by natural forces, these forces could be wind as well as water.
Therefore, as you were climbing a a mountain, you noticed that rocks were crumbling below your feet and moving down the mountain. What is observed are weathering and erosion processes.
After the weakening and broken up of the rock by weathering then erosion transport the bit of the rock down the mountain as you are climbing, which means the "weathering process" breakdown and the "erosion process" involves the transport or movement of the bit of the rocks
1. What is the electron configuration for zirconium?
1s 2s 2p 3s 3p 3d 10 452 4p 532 44?
132 232 2p 3s 3p 432 3410 4p6 552 44²
O 132 232 2p 3s 3p 3040 4p 58% 42%
O 1:2 232 2p 3s 3p 452 300 dp" 4d?
Answer:
nose Inglés
bssnsnnsnsnsnsnsks
Answer: I think its the first won
Explanation:
(copped and pasted from website)
Zirconium
Electronic configuration
1s22s22p63s23p63d104s24p64d25s2
Explain why there is a difference in the thickness of the crust between the side of the moon facing the Earth and the side that faces away from the Earth?
Answer:
the lack of maria; the thicker crust means it was harder for giant impacts to pierce the crust and get darker basaltic lava bubbling up.
Explanation:
1. How many valence electrons does lodine
have?
A train station in Tokyo uses tiles that convert people’s footsteps into electricity.
A.Restore
B. Rethink
C. Reduce
D. reuse
Answer:
reuse
Explanation:
help me out plz!!!!
Which characteristic is related to kinetic energy but not potential energy
Answer:
kinectic is movement and potential is still
Explanation:
While kinetic energy of an object is relative to the state of other objects in its environment, potential energy is completely independent of its environment. Hence the acceleration of an object is not evident in the movement of one object, where other objects in the same environment are also in motion.
Answer:an object’s speed
Explanation:
When their is a new moon the sun and moon are on the same side of the earth this leads to a combination of gravitational forces causing usually high tides called
Neap tides
Low tides
Supreme tides
Spring tides
Answer:
Low Tides
Explanation:
Took the test
100%
whats the mass of neon
Answer:
20.17 (or if you want to round .18)
Explanation:
If you ever need help with this again the atomic mass is the number underneath the element name
Calculate the average atomic mass of antimony
Antimony-121 has a mass of 120.904 amu and a natural % abundance 57.21
Antimony-123 has a mass of 122.904 amu and a natural % abundance of 42.79
can you give the work aswell trying to understand how to do it
Answer:
Wow, now this one is a hard one, took me quite a while to figure it out but here it is
The abundances of the two isotopes is:
Antimony-121 = 57.2%
Antimony-123 = 42.8%
Explanation:
Match these solutions with their examples:
Liquid in liquid
Solid in liquid
gas in liquid
gas in gas
solid in solid
liquid in solid
Gas in solid
Examples
A. Air
B. seawater
C. marshmallow
Answer:
sea water
Explanation:
a sea water can match the following
H2 (g) + F2 (g) ----- > HF(g) *
What type of reaction?
Answer: Hydrogen fluoride
Explanation:
If an element has an atomic number of 12 how many protons does each atom have?
The breaking and forming of bonds between atoms in substances results in changes in the _______ contained in the substances.
Answer:
Electrons
Explanation:
The breaking and forming of bonds between atoms in substances results in changes in the number of electrons in the substance.
Atoms combined in order to share, gain or lose electrons for it to be stable. The noble gases have a set up configuration which makes them stable. All atom tend to mimic the noble gases.please answer this its really fast
In the following balanced equation what is a correct mol ratio? *
1 mol CH4 / 2 mol CO2
1 mol O2 / 1 mol H2O
2 mol CO2 / 3 mol O2
4 mol H2O / 3 mol CH4
Answer:
ugly
Explanation: