The concentration of the Nitric acid solution : 0.114 M
Further explanationTitration is a procedure for determining the concentration of a solution (analyte) by reacting with another solution whose known concentration (usually a standard solution) is called the titrant. Determination of the endpoint/equivalence point of the reaction can use indicators according to the appropriate pH range
Titrations can be acid-base titration, depositional titration, and redox titration. An acid-base titration is the principle of neutralization of acids and bases
Reaction
HNO₃ + NaOH → NaNO₃ + H₂O
Concentration a standard solution of sodium hydroxide : 0.0998 mol/dm³ , and the volume = 25 cm³
moles NaOH=
[tex]\tt mol=M\times V\\\\mol=0.0998\times 25\\\\mol=2.495~mlmoles[/tex]
From the equation, mol ratio HNO₃ : NaOH = 1 : 1, so mol HNO₃ = mol NaOH=2.495 mlmoles
The volume of HNO₃ = 21.8 cm³, so the concentration :
[tex]\tt M=\dfrac{n}{V}\\\\M=\dfrac{2.495}{21.8}\\\\M=0.114[/tex]
The concentration of the nitric acid solution is 0.11445 mol/dm³
From the question,
We are to calculate the concentration of the nitric acid solution
The given balanced chemical equation for the reaction is
HNO₃ + NaOH → NaNO₃ + H₂O
This means 1 mole of HNO₃ is needed to completely neutralize 1 mole of NaOH
Using the formula
[tex]\frac{C_{A}V_{A} }{C_{B}V_{B}} = \frac{n_{A}}{n_{B}}[/tex]
Where [tex]C_{A}[/tex] is the concentration of acid
[tex]C_{B}[/tex] is the concentration of base
[tex]V_{A}[/tex] is the volume of acid
[tex]V_{B}[/tex] is the volume of base
[tex]n_{A}[/tex] is the mole ratio of acid
[tex]n_{B}[/tex] is the mole ratio of base
From the given information
[tex]C_{B}= 0.0998\ mol/dm^{3}[/tex]
[tex]V_{A} = 21.80 \ cm^{3}[/tex]
[tex]V_{B} = 25.0 \ cm^{3}[/tex]
From the balanced chemical equation
[tex]n_{A} = 1[/tex]
[tex]n_{B} =1[/tex]
Putting the parameters into the formula, we get
[tex]\frac{C_{A} \times 21.80 }{0.0998 \times 25.0} = \frac{1}{1}[/tex]
Then,
[tex]C_{A} \times 21.80=0.0998 \times 25.0[/tex]
∴ [tex]C_{A}=\frac{0.0998 \times 25.0}{21.80}[/tex]
[tex]C_{A} =\frac{2.495}{21.80}[/tex]
[tex]C_{A} = 0.11445 \ mol/dm^{3}[/tex]
Hence, the concentration of the nitric acid solution is 0.11445 mol/dm³
Learn more here: https://brainly.com/question/14014457
Taking deep breaths can help trigger our
parasympathetic
system. The
parasympathetic nervous
system controls the regular functions like—————
Answer:
digestion
Explanation:
The parasympathetic nervous regulates life-sustaining processes, like digestion, during times when your body is relaxed.
HOW MANY MILLILITERS ARE IN 98.1 M? WHAT IS THE UNIT?
Answer:98.1 meters = 98,100 mm
Explanation: 1 meter = 1,000 mm.
Is the Food Pyramid important to Humans and our Digestive Systems? Explain why or why not below please use a complete sentence, or put what the one thing that we cannot digest but is in the food pyramid.
Answer:
The food pyramid is just to make people have a healthier "Diet."
Explanation:
It shows the food groups we eat and which ones to put together to make a healthy diet. Eating the right amount of each food group is called a "Balance" diet. Therefore, its not needed, but it is useful.
On December 25th, 1776, General George Washington’s Continental Army crossed the Delaware River and defeated troops of Hessians (German soldiers fighting for the British). Here’s a fictionalized account of that historical event: “While our general stood bravely in the Christmas Day cold, I shivered from more than just the icy wind. Beyond the river were enemy soldiers from the most obscure corners of Europe. I could barely fathom the unknown monsters ahead.” How did the fiction author make the factual account more exciting? A The author altered the chronology of the historical events. B The author omitted the factual details, because readers already know them. C The author enhanced the drama by altering the description of the enemy troops. D The author created a sense of danger by changing the setting of the event.
Answer:the answer is C
Answer:
C
Explanation:
I'm doing this test now and I just got it right :)
If an exothermic reaction heats a calorimeter with a total mass of 10 grams from 20°c to 30°c what is the total enthalpy change for the reaction? assume that the specific heat capacity of the system is 2 j/g⋅k.
The total enthalpy change for the reaction is 200 J.
During an exothermic reaction, heat is released from the system which leads to an increase in its temperature.
The enthalpy change during an exothermic reaction is given by the equation,
Q= m × S × ΔT
Here, Q ⇒ Enthalpy change during a reaction
m ⇒ Mass of the substance
S ⇒ Specific Heat Capacity of the system
ΔT ⇒ Change in temperature of the system
On applying the given values in the above equation, we get the value of enthalpy as
Q= 10 x 2 x 10
= 200 J.
Hence, the total enthalpy change for the reaction is 200 J.
Read more about Enthalpy:
brainly.com/question/16720480
#SPJ4
15. Which of the following would be comprised of atoms?
O emotions
Olight
O paper
O sound
Answer:
Paper
Explanation:
This is because out of all of the above it is the only physical substance
What happens in cellular respiration?
A. Glucose reacts with water in the stomach to produce
energy.
B. Glucose and oxygen react to form carbon dioxide, water,
and heat.
O C. Glucose is broken down to provide oxygen for all cells in
the body.
D. Glucose is formed from smaller hydrocarbons in the body.
Answer:
Option B
Explanation:
The reaction can be summarized as
6O2+C6H12O6——›6CO2+6H2O+Heat
Answer:
B
Explanation:
The pressure of a gas in a tank is 3.20 ATM at 22.0°C if the temperature is increased to 60.0°C what will the new pressure in the tank be
Answer:
P₂ = 3.61 atm
Explanation:
Given data:
Initial pressure of tank = 3.20 atm
Initial temperature = 22.0°C
Final temperature = 60.0°C
Final pressure = ?
Solution:
Initial temperature = 22.0°C (22.0 +273 = 295 K)
Final temperature = 60.0°C (60 +273 = 333)
According to Gay-Lussac Law,
The pressure of given amount of a gas is directly proportional to its temperature at constant volume and number of moles.
Mathematical relationship:
P₁/T₁ = P₂/T₂
Now we will put the values in formula:
3.20 atm / 295 K = P₂/333 K
P₂ = 3.20 atm × 333 K / 295 K
P₂ = 1065.6 atm. K /295 K
P₂ = 3.61 atm
Answer:
The answer is 3.61
Explanation:
reI did all the math and everything, the pressure is 3.61
A meniscus must be considered when making which of the following measurements?
Answer:
When you read a scale on the side of a container with a meniscus, such as a graduated cylinder or volumetric flask, it's important that the measurement accounts for the meniscus. Measure so that the line you are reading is even with the center of the meniscus. For water and most liquids, this is the bottom of the meniscus. For mercury, take the measurement from the top of the meniscus. In either case, you are measuring based on the center of the meniscus. For a flat meniscus, make sure the liquid is level. Usually placing the container on a lab bench does the trick.
You won't be able to take an accurate reading looking up at the liquid level or down into it. Get eye level with the meniscus. You can either pick up the glassware to bring it to your level or else bend down to take measurements in situations where you're concerned with dropping the container or spilling its contents.
Use the same method to take measurements each time so that any errors you make will be consistent.
Explanation:
What happens when an object
returns to its original shape-does it
still have elastic energy?
Answer:
Elastic potential energy is energy stored as a result of applying a force to deform an elastic object. The energy is stored until the force is removed and the object springs back to its original shape, doing work in the process. The deformation could involve compressing, stretching, or twisting the object.
How does blood flow from a person's leg back to the person's heart?
A Gravity pushes the blood upward.
B Lungs pull the blood upward.
C Contracting leg muscles push the blood upward.
D Contracting heart muscles pull the blood upward.
. the density (d) of a substance is an intensive property that is defined as the ratio of its mass (m) to its volume (v). density
Density is intensive because it is the ratio of two extensive properties that is mass to volume.
What is Density ?Density is defined as mass per unit volume. S.I unit if density is kg/m³.
It is expressed as
Density = [tex]\frac{\text{Mass}}{\text{Volume}}[/tex] or [tex]d = \frac{m}{V}[/tex]
What is Intensive Property ?Intensive property is the property which does not depend on the size of the system. Intensive property can be easily identified. Intensive property is the independent property. The size does not change in this.
Example of intensive property are Density, Freezing point, melting point, colour, Lustre, etc.
What is Extensive property ?Extensive property is the property which depend on the substance. Extensive property cannot be easily identified.
Example of extensive property length, weight, volume, mass etc.
Thus from the above conclusion we can say that Density is intensive because it is the ratio of two extensive properties that is mass to volume.
Learn more about Density here: https://brainly.com/question/1354972
#SPJ4
Disclaimer: The given question is incomplete on the portal. Here is the complete question.
Question: The density (d) of a substance is an intensive property that is defined as the ratio of its mass (m) to its volume (v)
density = [tex]\frac{\text{Mass}}{\text{Volume}}[/tex] or [tex]d = \frac{m}{V}[/tex]
Considering that mass and volume are both extensive properties, explain why their ratio, density is intensive.
Why does the reaction proceed more quickly when the surface area is increased?
The reaction proceed more quickly when the surface area is increased because the frequency of collision increases.
What is Collision theory?Collision theory states that for a chemical reaction to proceed, it should achieve these conditions-
Molecules/atoms must collideThe particles must collide in right orientationThe particles must collide with enough energyIncreasing the surface area increases the probability of effective collisions. It thus increases the probability of the three conditions being achieved and results into increase in the frequency of collision and thus increases the rate of reaction.
Therefore, the reaction proceed more quickly when the surface area is increased because the frequency of collision increases.
Learn more about Collision Theory, here:
https://brainly.com/question/14566831
#SPJ3
A tub is filled to the brim with water.
If you were to completely submerge
your body in this tub, how much water
would overflow out of the tub?
The volume of water that would overflowed out of the tub is directly related to the volume of the object submerged on it. Thus it depends on the mass and density of the object.
What is Archimedes principle?The Greek mathematician and inventor Archimedes discovered the physical law of buoyancy, which states that any body completely or partially submerged in a fluid (gas or liquid) at rest is subject to an upward, or buoyant, force whose magnitude is equal to the weight of the fluid displaced by the body.
The volume of fluid that has been displaced is equal to the volume of an object that is completely submerged in the liquid or to the portion of the volume below the surface for an object that is only partially submerged.
The buoyant force's strength is equal to the weight of the fluid that has been dispersed. A body floating in a liquid or gas experiences an analogous buoyant force.
To find more on Archimedes principle, refer here:
https://brainly.com/question/13106989
#SPJ2
How many moles are found in 6.63 x 10^23 ions of Ca ^+2
Answer:
a milllion moles
Explanation:
ASAP!!!!! Just answer the reasoning and the story is there if you need it (probably do though)
How many moles of NaCl are in a 1 kg salt packet? Write the answer to one decimal place.
1Kg = 1000g
the molar mass of NaCl = 58.44 g/mol
number of moles = Mass / Molar mass
n = 1000g ÷ (58.44 g/mol)
n = 17.1115 mol
since you want the answer in one decimal place
then number of moles = 17.1 moles
Reyna is making a mixture of lithium chloride (LiCl)) and water (H2O). The lithium chloride completely dissolves in the water, LiCl (aq). What is the solvent?
Answer:
Water
Explanation:
The solvent that formed this mixture is the water. The solute is lithium chloride.
A solvent is the fluid medium which allows a solute to dissolve. A solute is a solid substance which is dispersed in the solventSince the solvent is the dissolving medium, it is stated in the problem that lithium chloride completely dissolves in the water.
Therefore, the water is the solvent.
please help find the significant figure when the mass is converted to mg
pls this is my second time asking these questions, i'm sorry, but i really need help!!! 1. what happens to atoms when there is a chemical reaction? 2. what are the rules that have to be followed for atoms? 3. what do these rules mean for chemical reactions? sorry, chemistry isn’t really my best subject lol
Answer:
the atoms of the original substances gain, lose and even share their very own electrons. write the symbols of the elements that form the compound. Write down the valency, and lastly go over valencies. This is all I got so far. I hope this helps
Explanation:
An organism can occupy more than one niche in an ecosystem
A) True
B) False
Answer T
Explanation:
What causes liquid water to freeze?
Answer:
Loss of energy to a colder material. Ice forms at 32°F /0° C.
Explanation:
As water cools, the natural movement between the molecules slows until it changes to a solid state (just as it boils to gas if they become too active). This movement doesn't completely stop until the material hits "absolute zero" at -460°F /-273° C. (0° Kelvin).
That's about the temperature "in the shade" in outer space.
A more interesting question would be, "why does water expand when it freezes?" The H - two - O molecule forms a triangle (with the O in the middle).
As it cools, the angle formed by the two H's gets larger. At around 36°F /2° C , the shrinking space between molecules gets overwhelmed by the expanding size of each molecule.
So, for those last few degrees before freezing, the overall volume gets bigger instead of continuing to decrease.
That's what causes potholes in roads (water settles into cracks, then makes the crack larger as it freezes). It's what damages the eaves trough around your roof, breaks leaves down into topsoil and splits boulders in half.
Convert into decimal number system
Answer:
Explanation:
I am sorry but please give detailed question
Answer:
Step 1 − Divide the decimal number to be converted by the value of the new base.
Step 2 − Get the remainder from Step 1 as the rightmost digit (least significant digit) of new base number.
Step 3 − Divide the quotient of the previous divide by the new base.
Step 4 − Record the remainder from Step 3 as the next digit (to the left) of the new base number.
Repeat Steps 3 and 4, getting remainders from right to left, until the quotient becomes zero in Step 3.
Explanation:
A container of gas is initially at 0.25 atm and 0 ˚C. What will the pressure be at 125 ˚C?
Answer:
0.37atm
Explanation:
Given parameters:
Initial pressure = 0.25atm
Initial temperature = 0°C = 273K
Final temperature = 125°C = 125 + 273 = 398K
Unknown:
Final pressure = ?
Solution:
To solve this problem, we use a derivative of the combined gas law;
[tex]\frac{P1}{T1}[/tex] = [tex]\frac{P2}{T2}[/tex]
P and T are pressure and temperature
1 and 2 are initial and final values
[tex]\frac{0.25}{273}[/tex] = [tex]\frac{P2}{398}[/tex]
P2 = 0.37atm
HELP PLEASE 100 points!!!
Answer:
by the looks of it the answer you have is correct
Explanation:
Answer:
The answer B
.
Explanation:
which of the following instruments id used to describe how much matter is an object
Answer:
Mass measures the amount of matter in a substance or an object. The basic SI unit for mass is the kilogram (kg). Volume measures the amount of space that a substance or an object takes up.
Hope it help
two students noted that the acceleration of a car was =40 k/m squared . the fiesta student , "that can't be right . you can't have a negativo acceleration ."second student said , "that can't be right , you can't have seconds squared .
what would you say to each student to help them More better understand how acceleration Is described
PLEASE ANSWER ASAP,FOR MY SCIENCE TEST
Answer:
First one: Yes, It can be negative.
Explanation:
First one: The reason you can have negative acceleration is that acceleration can slow down, or decelerate, causing the negative acceleration.
Coral reef are threatened today mainly because
Answer: Pollution.
Explanation: Humans are polluting Earth's oceans with our toxic waste and plastic garbage. This trash kills the coral reefs that exist in said oceans.
Answer:
Really pollution because that includes a lot of things
Explanation:
Have a good day
Juan lays an object on a table in a well-lighted room. The object absorbs all visible light waves. What color object does Juan see?
A. white
B. black
C. violet
D. red
I need the answer for science asap
Answer:
Black
Explanation:
White color reflects visible light while Black absorbs all light, and gives heat, so the answer is Black!
Consider this reaction: Upper K Upper O Upper H + Upper H Upper B 4 right arrow Upper K Upper B r + Upper H Subscript 2 Baseline Upper O
Which is the acid in this reaction?
KOH
HBr
KBr
H2O
Answer:
HBr
Explanation: