Answer:
d = 41.91 m
Explanation:
In order to calculate the distance traveled by the train while superman passes it, you write the equations of motion for both superman and train:
For train, you have a motion with constant speed. You write the equation of motion of the position of the front of the train:
[tex]x=x_o+v_1t[/tex] (1)
xo: initial position of the front of the train = 500m
v1: speed of the train = 50km/h
For superman, you take into account that the motion is an accelerated motion (you assume superman is at the origin of coordinates):
[tex]x'=v_2t+\frac{1}{2}at^2[/tex] (1)
v2: initial speed of superman = 100km/h
a: acceleration = 10m/s^2
When superman passes the train, both positions x and x' will be equal. Hence, you equal the equations (1) and (2) and you calculate the time t. But before you convert the units of the velocities v1 and v2 to m/s:
[tex]v_1=50\frac{km}{h}*\frac{1000m}{1km}*\frac{1h}{3600s}=13.88\frac{m}{s}\\\\v_2=100\frac{km}{h}=\frac{1000m}{1km}*\frac{1h}{3600s}=27.77\frac{m}{s}[/tex]
Thus, you equal x=x'
[tex]x=x'\\\\x_o+v_1t=v_2t+\frac{1}{2}at^2\\\\500m+(13.88m/s)t=(27.77m/s)t+\frac{1}{2}(10m/s^2)t^2\\\\(50\frac{m}{s^2})t^2+(13.89\frac{m}{s})t-500m=0[/tex]
You solve the last equation for t by using the quadratic formula:
[tex]t_{1,2}=\frac{-13.89\pm \sqrt{(13.89)^2-4(50)(-500)}}{2(50)}\\\\t_{1,2}=\frac{-13.89\pm 316.53}{100}\\\\t_1=3.02s\\\\t_2=-3.30s[/tex]
You only use t1 = 3.02s because negative times do not have physical meaning.
Next, you replace this value of t in the equation (1) to calculate the position of the train (for when superman just passed it):
[tex]x=500m+(13.88m/s)(3.02s)=541.91m[/tex]
x is the position of the front of the train, then, the dstance traveled by the train is:
d = 541.91m - 500m = 41.91 m
A 550 kg dragster accelerates from rest to a final speed of 110 m/s in 400 m (about a quarter of a mile) and encounters an average frictional force of 1200 N. What is its average power output in watts and horsepower if this takes 7.30 s
Answer:
[tex]52.25\times10^4W\\699.1 hp[/tex]
Explanation:
According to the energy conversation:
ΔK=[tex]-f_kd+W[/tex]
ΔK=[tex]K_f-K_i ; K=1/2 mv^2[/tex]
where,
[tex]k_i, k_f[/tex] are initial and final kinetic energy of the system.
[tex]v_i[/tex]= initial velocity of the system
[tex]v_f[/tex]=final velocity of the system
W= total work done on the system
[tex]f_k[/tex]= friction force
d= distance traveled
Given: [tex]v_f[/tex]=110m/s
d=400m
[tex]f_k[/tex]=1200N
[tex]v_i[/tex]=0m/s
t=7.3s
ΔK=[tex]-f_kd+W[/tex]
W= ΔK + [tex]f_kd[/tex]
=[tex]K_f-K_i+f_kd\\[/tex]
[tex]=1/2 mv_f^2-1/2 mv_i^2+f_kd\\=\frac{1}{2} \times 550\times110^2 - \frac{1}{2} \times 550\times0^2+ (1200\times400)\\=3807500[/tex]
[tex]P=\frac{W}{t} =\frac{3807500}{7.3} \\P=52.15 \times10^4w\\P=\frac{52.15 \times10^4}{746} \\P=699.1 hp[/tex]
"A trooper is moving due south along the freeway at a speed of 28 m/s. At time t = 0, a red car passes the trooper. The red car moves with constant velocity of 40 m/s southward. At the instant the trooper's car is passed, the trooper begins to speed up at a constant rate of 2.9 m/s2. What is the maximum distance ahead of the trooper that is reached by the red car?"
Answer:
24.83 m
Explanation:
Applying the equation of motion;
d = vt + 0.5at^2 ......1
Where;
d = distance
v = velocity
t = time
a = acceleration
For the trooper;
v = 28 m/s
a = 2.9 m/s^2
Substituting into equation 1;
d1 = 28t + 0.5(2.9t^2)
d1 = 28t + 1.45t^2
For the red car;
v = 40 m/s
a = 0
Substituting into equation 1
d2 = 40t
The difference in distance is;
d = d2 - d1
d = 40t - (28t + 1.45t^2)
d = 12t - 1.45t^2
The maximum distance is at d(d)/dt = 0
differentiating d;
d' = 12 - 2.9t = 0
2.9t = 12
t = 12/2.9 = 4.137931034482
t = 4.138 s
Substituting t into function d;
d(max) = 12(4.138) - 1.45(4.138^2)
d(max) = 24.8275862 = 24.83 m
the maximum distance ahead of the trooper that is reached by the red car is 24.83 m
A train starts from rest and accelerates uniformly, until it has traveled 5.6 km and acquired a velocity of 42 m/s. The train then moves at a constant velocity of 42 m/s for 420 s. The train then slows down uniformly at 0.065 m/s^2, until it is brought to a halt. What is the acceleration during the first 5.6 km of travel?
Answer:
0.1575 m/s^2
Explanation:
Solution:-
- Acceleration ( a ) is expressed as the rate of change of velocity ( v ).
- We are given that the trains starts from rest i.e the initial velocity ( vo ) is equal to 0. Then the train travels from reference point ( so = 0 ) to ( sf = 5.6 km ) from the reference.
- During the travel the train accelerated uniformly to a speed of ( vf =42 m/s ).
- We will employ the use of 3rd kinematic equation of motion valid for constant acceleration ( a ) as follows:
[tex]v_f^2 = v_i^2 + 2*a*( s_f - s_o )[/tex]
- We will plug in the given parameters in the equation of motion given above:
[tex]42^2 = 0^2 + 2*a* ( 5600 - 0 )\\\\1764 = 11,200*a\\\\a = \frac{1,764}{11,200} \\\\a = 0.1575 \frac{m}{s^2}[/tex]
Answer: the acceleration during the first 5.6 km of travel is 0.1575 m / s^2
The site from which an airplane takes off is the origin. The X axis points east, the y axis points straight up. The position and velocity vectors of the plane at a later time are given by r=(1.21x103i+3.45x104;)m and v= (2 i-3.5j) m/s The magnitude, in meters, of the plane's displacement from the origin is:_________
a. 2.50 x104
b. 1.45 x 104
c. 3.45x104
d. 2.5x103
e. none of the above
Answer:
d = 3.5*10^4 m
Explanation:
In order to calculate the displacement of the airplane you need only the information about the initial position and final position of the airplane. THe initial position is at the origin (0,0,0) and the final position is given by the following vector:
[tex]\vec{r}=(1.21*10^3\hat{i}+3.45*10^4\hat{j})m[/tex]
The displacement of the airplane is obtained by using the general form of the Pythagoras theorem:
[tex]d=\sqrt{(x-x_o)^2+(y-y_o)^2}[/tex] (1)
where x any are the coordinates of the final position of the airplane and xo and yo the coordinates of the initial position. You replace the values of all variables in the equation (1):
[tex]d=\sqrt{(1.12*10^3-0)^2+(3.45*10^4-0)^2}=3.45*10^4m[/tex]
hence, the displacement of the airplane is 3.45*10^4 m
A force of 640 newtons stretches a spring 4 meters. A mass of 40 kilograms is attached to the end of the spring and is initially released from the equilibrium position with an upward velocity of 6 m/s. Find the equation of motion.
A parallel-plate capacitor in air has a plate separation of 1.30 cm and a plate area of 25.0 cm2. The plates are charged to a potential difference of 255 V and dis-connected from the source. The capacitor is then immersed in distilled water. Determine a) the charge on the plates before and after immersion.b) the capacitance and potential difference after immersion.c) the change in energy of the capacitor.
Answer:
Explanation:
capacitance of air capacitor
C = ε₀ A / d
ε₀ is permittivity of medium , A is plate area , d is distance between plate .
C = 8.85 x 10⁻¹² x 25 x 10⁻⁴ / 1.3 x 10⁻²
= 170.19 x 10⁻¹⁴ F .
charge on the capacitor when it is charged to potential of 255 V
= CV , C is capacitance and V is potential
= 170.19 x 10⁻¹⁴ x 255
= 4.34 x 10⁻¹⁰ C .
After it is disconnected from the source , and it is immersed in water , charge on it remains the same .
So its charge when immersed in water will be constant at 4.34 x 10⁻¹⁰ C.
b )
When it is immersed in water its capacity increases k times where k is dielectric constant of water which is 80 .
capacitance of capacitor in water = 80 x 170.19 x 10⁻¹⁴ F
= 13615.2 x 10⁻¹⁴ F .
= 1.36 x 10⁻¹⁰ F
potential difference = charge / capacitance
= 4.34 x 10⁻¹⁰ / 1.36 x 10⁻¹⁰
= 3.2 V
c )
Energy of capacitor = 1/2 C V²
Initial energy = 1/2 x 170.19 x 255² x 10⁻¹⁴
= 55.33 x 10⁻⁹ J
Final energy = 1/2 x 1.36 x 10⁻¹⁰ x 3.2²
= .7 x 10⁻⁹ J .
decrease of energy = 54.63 x 10⁻⁹ J .
Which of these charges is experiencing the electric field with the largest magnitude? A 2C charge acted on by a 4 N electric force. A 3C charge acted on by a 5N electric force. A 4C charge acted on by a 6N electric force. A 2C charge acted on by a 6N electric force. A 3C charge acted on by a 3N electric force. A 4C charge acted on by a 2N electric force. All of the above are experiencing electric fields with the same magnitude
Answer:
The highest electric field is experienced by a 2 C charge acted on by a 6 N electric force. Its magnitude is 3 N.
Explanation:
The formula for electric field is given as:
E = F/q
where,
E = Electric field
F = Electric Force
q = Charge Experiencing Force
Now, we apply this formula to all the cases given in question.
A) A 2C charge acted on by a 4 N electric force
F = 4 N
q = 2 C
Therefore,
E = 4 N/2 C = 2 N/C
B) A 3 C charge acted on by a 5 N electric force
F = 5 N
q = 3 C
Therefore,
E = 5 N/3 C = 1.67 N/C
C) A 4 C charge acted on by a 6 N electric force
F = 6 N
q = 4 C
Therefore,
E = 6 N/4 C = 1.5 N/C
D) A 2 C charge acted on by a 6 N electric force
F = 6 N
q = 2 C
Therefore,
E = 6 N/2 C = 3 N/C
E) A 3 C charge acted on by a 3 N electric force
F = 3 N
q = 3 C
Therefore,
E = 3 N/3 C = 1 N/C
F) A 4 C charge acted on by a 2 N electric force
F = 2 N
q = 4 C
Therefore,
E = 2 N/4 C = 0.5 N/C
The highest field is 3 N, which is found in part D.
A 2 C charge acted on by a 6 N electric force
b) A non-inductive load takes a current of 15 A at 125 V. An inductor is then connected
in series in order that the same current shall be supplied from 240 V, 50 Hz mains.
Ignore the resistance of the inductor and calculate:
i. the inductance of the inductor;
ii. the impedance of the circuit;
iii. the phase difference between the current and the applied voltage.
Assume the waveform to be sinusoidal.
Answer:
i. 43.5 mH ii. 16 Ω. In phasor form Z = (8.33 + j13.66) Ω iii 58.64°
Explanation:
i. The resistance , R of the non-inductive load R = 125 V/15 A = 8.33 Ω
The reactance X of the inductor is X = 2πfL where f = frequency = 50 Hz.
So, x = 2π(50)L = 100πL Ω = 314.16L Ω
Since the current is the same when the 240 V supply is applied, then
the impedance Z = √(R² + X²) = 240 V/15 A
√(R² + X²) = 16 Ω
8.33² + X² = 16²
69.3889 + X² = 256
X² = 256 - 69.3889
X² = 186.6111
X = √186.6111
X = 13.66 Ω
Since X = 314.16L = 13.66 Ω
L = 13.66/314.16
= 0.0435 H
= 43.5 mH
ii. Since the same current is supplied in both circuits, the impedance Z of the circuit is Z = 240 V/15 A = 16 Ω.
So in phasor form Z = (8.33 + j13.66) Ω
iii. The phase difference θ between the current and voltage is
θ = tan⁻¹X/R
= tan⁻¹(314.16L/R)
= tan⁻¹(314.16 × 0.0435 H/8.33 Ω)
= tan⁻¹(13.66/8.33)
= tan⁻¹(1.6406)
= 58.64°
Two very large parallel sheets a distance d apart have their centers directly opposite each other. The sheets carry equal but opposite uniform surface charge densities. A point charge that is placed near the middle of the sheets a distance d/2 from each of them feels an electrical force F due to the sheets. If this charge is now moved closer to one of the sheets so that it is a distance d/4 from that sheet, what force will feel
Answer:
the force we will feel is F
Explanation:
According to the Gauss law, electric field due to very large sheet of charge is as follows.
[tex]E = \frac{\sigma}{2 \times \epsilon_{o}}[/tex]
where,
[tex]\sigma[/tex] = charge per unit area
Since, it is given that there are two sheets of equal and opposite charge. Therefore, electric field between the plates will be as follows. [tex]E = \frac{\sigma}{2 \times \epsilon_{o}} + \frac{\sigma}{2 \times \epsilon_{o}}[/tex]
Also, we know that relation between force and electric field is as follows.
F = qE
Hence, force felt by the charge present inside the plates will be as follows.
[tex]F = q \times \frac{\sigma}{2 \times \epsilon_{o}}[/tex]
This depicts that force is not dependent on the distance and the charge is kept from one of the plate. Therefore, force F felt by the charge is same when it is placed at a distance d/2 and at a distance d/4 from one of the plate.
A small ball of mass m is aligned above a larger ball of mass M = 0.63kg (with a slight separation) and the two are dropped simultaneously from a height of 1.8m. If the larger ball rebounds elastically from the floor and the small ball rebounds elastically from the larger ball what value of m results in the larger ball stopping when it collides with the small ball?
A bicycle wheel has an initial angular velocity of 1.10 rad/s . Part A If its angular acceleration is constant and equal to 0.200 rad/s2 , what is its angular velocity at t = 2.50 s ? (Assume the acceleration and velocity have the same direction) Express your answer in radians per second. ω = nothing rads Request Answer Part B Through what angle has the wheel turned between t = 0 and t = 2.50 s ? Express your answer in radians. Δθ = nothing rad Request Answer Provide Feedback
Let [tex]\theta[/tex], [tex]\omega[/tex], and [tex]\alpha[/tex] denote the angular displacement, velocity, and acceleration of the wheel, respectively.
(A) The wheel has angular velocity at time [tex]t[/tex] according to
[tex]\omega=\omega_0+\alpha t[/tex]
so that after 2.50 s, the wheel will have attained an angular velocity of
[tex]\omega=1.10\dfrac{\rm rad}{\rm s}+\left(0.200\dfrac{\rm rad}{\mathrm s^2}\right)(2.50\,\mathrm s)=\boxed{1.60\dfrac{\rm rad}{\rm s}}[/tex]
(B) The angular displacement of the wheel is given by
[tex]\theta=\theta_0+\omega_0t+\dfrac\alpha2t^2\implies\Delta\theta=\omega_0t+\dfrac\alpha2t^2[/tex]
After 2.50 s, the wheel will have turned an angle [tex]\Delta\theta[/tex] equal to
[tex]\Delta\theta=\left(1.10\dfrac{\rm rad}{\rm s}\right)(2.50\,\mathrm s)+\dfrac12\left(0.200\dfrac{\rm ram}{\mathrm s^2}\right)(2.50\,\mathrm s)^2=\boxed{3.38\,\mathrm{rad}}[/tex]
Suppose your hair grows at the rate of 1/55 inch per day. Find the rate at which it grows in nanometers per second. Because the distance between atoms in a molecule is on the order of 0.1 nm, your answer suggests how rapidly atoms are assembled in this protein synthesis.
Answer:5.35nm
Explanation:
Consider that 1 inch is = 0.0254m
we have,
1m= 1x10^9 nm
While:
0.0254m = 2.54x10^7nm
1/55 (2.54x10^7) = 4.6181 x 10^5nm
1 day= 24 hrs
= (24x60) when calculating in min
= (24x60x60) calculating in seconds we have:
= 8.64x10⁴sec
In 8.64x10^4 seconds, the hair grows by 4.6181 x 10^5nm
Therefore, the amount by which the hair grows in 1 second will be;
= (4.6181 x 10^5)/(8.64x10^4)
= 5.35nm
The rate of growth will be 5.35nm
What is the speed at which a spaceship shoots up from earth ?
Answer:
Once at a steady cruising speed of about 16,150mph (26,000kph
Explanation:
Positive charge Q is placed on a conducting spherical shell with inner radius R1 and outer radius R2. A particle with charge q is placed at the center of the cavity. The net charge on the inner surface of the conducting shell is
Answer: in this question, the only charge in the cavity is Q. Inside the conducting spherical shell, the electric field is zero.
While outside the shell, the electric field is given by: k(q + Q)/r²
Where;
K= is a constant which is given as, 8.99 x 10^9 N m² / C².
Q= source charge which creates the electric field
q= is the test charge which is used to measure the strength of the electric field at a given location.
r= is the radius
Explanation: Inside the conducting spherical shell, the electric field is zero since the Electric field vanishes everywhere inside the volume of a good conductor.
A machinist turns the power on to a grinding wheel, which is at rest at time t = 0.00 s. The wheel accelerates uniformly for 10 s and reaches the operating angular velocity of 25 rad/s. The wheel is run at that angular velocity for 37 s and then power is shut off. The wheel decelerates uniformly at 1.5 rad/s2 until the wheel stops. In this situation, the time interval of angular deceleration (slowing down) is closest to: A machinist turns the power on to a grinding wheel, which is at rest at time t = 0.00 s. The wheel accelerates uniformly for 10 s and reaches the operating angular velocity of 25 rad/s. The wheel is run at that angular velocity for 37 s and then power is shut off. The wheel decelerates uniformly at 1.5 rad/s2 until the wheel stops. In this situation, the time interval of angular deceleration (slowing down) is closest to:__________.
a) 19 s
b) 17 s
c) 21 s
d) 23 s
e) 15 s
Starting from rest, the wheel attains an angular velocity of 25 rad/s in a matter of 10 s, which means the angular acceleration [tex]\alpha[/tex] is
[tex]25\dfrac{\rm rad}{\rm s}=\alpha(10\,\mathrm s)\implies\alpha=2.5\dfrac{\rm rad}{\mathrm s^2}[/tex]
For the next 37 s, the wheel maintains a constant angular velocity of 25 rad/s, meaning the angular acceleration is zero for the duration. After this time, the wheel undergoes an angular acceleration of -1.5 rad/s/s until it stops, which would take time [tex]t[/tex],
[tex]0\dfrac{\rm rad}{\rm s}=25\dfrac{\rm rad}{\rm s}+\left(-1.5\dfrac{\rm rad}{\mathrm s^2}\right)t\implies t=16.666\ldots\,\mathrm s[/tex]
which makes B, approximately 17 s, the correct answer.
The time interval of angular deceleration is 16.667 seconds, whose closest integer is 17 seconds. (B. 17 s.)
Let suppose that the grinding wheel has uniform Acceleration and Deceleration. In this question we need to need to calculate the time taken by the grinding wheel to stop, which is found by means of the following Kinematic formula:
[tex]t = \frac{\omega - \omega_{o}}{\alpha}[/tex] (1)
Where:
[tex]\omega_{o}[/tex] - Initial angular velocity, in radians per second.
[tex]\omega[/tex] - Final angular velocity, in radians per second.
[tex]\alpha[/tex] - Angular acceleration, in radians per square second.
[tex]t[/tex] - Time, in seconds.
If we know that [tex]\omega = 0\,\frac{rad}{s}[/tex], [tex]\omega_{o} = 25\,\frac{rad}{s}[/tex] and [tex]\alpha = -1.5\,\frac{rad}{s^{2}}[/tex], then the time taken by the grinding wheel to stop:
[tex]t = \frac{0\,\frac{rad}{s}-25\,\frac{rad}{s}}{-1.5\,\frac{rad}{s^{2}} }[/tex]
[tex]t = 16.667\,s[/tex]
The time interval of angular deceleration is 16.667 seconds. (Answer: B)
Please this related question: https://brainly.com/question/10708862
A small block with a mass of 0.120 kg is attached to a cord passing through a hole in a frictionless, horizontal surface (Fig. 6.34). The block is originally revolving at a distance of 0.40 m from the hole with a speed of 0.70 m/s. The cord is then pulled from below, shortening the radius of the circle in which the block revolves to 0.10 m. At this new distance, the speed of the block is observed to be 2.80 m/s.
(a) What is the tension in the cord in the original situation when the block has speed v = 0.70 m/s? (b) What is the tension in the cord in the final situation when the block has speed v = 2.80 m/s? (c) How much work was done by the person who pulled on the cord?
Answer:
a) 0.147 N
b) 9.408 N
c) 9.261 N
Explanation:
The tension on the cord is the only force keeping the block in circular motion, thus representing the entirety of its centripetal force [tex]\frac{mv^{2} }{r}[/tex]. Plugging in values for initial and final states and we get answers for a and b. The work done by the person causes the centripetal force to increase, and thus is the difference between the final tension and the initial tension.
Parallel light rays with a wavelength of 610nm fall on a single slit. On a screen 3.10m away, the distance between the first dark fringes on either side of the central maximum is 4.00mm.
What is the width of the slit?
Answer:
The width of the slit will be ".946 mm".
Explanation:
The given values are:
Wavelength = 610 × 10⁻⁹
Length, L = 3 m
As we know,
⇒ [tex]\frac{y}{L} = \frac{m(wavelength)}{a}[/tex]
On putting the estimated values, we get
⇒ [tex]\frac{2\times 10^{-3}}{3.1} = \frac{(1)(610 X 10^{-9})}{a}[/tex]
On applying cross-multiplication, we get
⇒ [tex]a=9.46\times 10^{-4}[/tex]
⇒ [tex]a = .946 mm[/tex]
For the RC circuit and the RL circuit, assume that the period of the source square wave is much larger than the time constant for each. Make a sketch of vR(t) as a function of t for each of the circuits?
Answer with Explanation:
Concepts and reason
The concept to solve this problem is that if a capacitor is connected in a RC circuit then it allows the flow of charge through circuit only till it gets fully charged. Once the capacitor is charged it will not allow any charge or current to flow.
Opposite is the case with inductor in the RL circuit. According to Faraday's law an inductor develops an emf to oppose the voltage applied but once the flux change stops then the inductor behaves just like a normal wire as if no inductor is there.
In attached figure, resistor is connected in series to the capacitor.
As we considered [tex]V_{C}[/tex] the voltage across the capacitor and [tex]V_{s}[/tex] the voltage across the source.
Voltage across a resistor In RC circuit.
[tex]V_{R}=V_S\left ( e^{-\frac{t}{RC}} \right )[/tex]
Voltage across a resistor In RL circuit.
[tex]V_{R}=V_S\left (1- e^{-\frac{Rt}{L}} \right )[/tex]
The sketch of [tex]\mathbf{v_R(t)}[/tex] as a function of t for each of the circuits can be seen in the diagram attached below.
For the Pre-Laboratory exercise, based on the assumption that the RC circuit has a capacitor and a sensing resistor while the RL circuit has a sensing resistor and an inductor.
The input voltage for both circuits is regarded as the square wave and if the square wave is much larger than the time constant for each.
Therefore, we can conclude that the below diagram shows an appropriate sketch of [tex]\mathbf{v_R(t)}[/tex] as a function of t for each of the circuits.
Learn more about RC circuits and RL circuits here:
https://brainly.com/question/15595203
Michelson and Morley's experiment is widely considered to have been:______
a. a success because it detected a shift in the interference pattern.
b. a failure because it detected a shift in the interference pattern.
c. a success because it did not detect a shift in the interference pattern.
d. a failure because it did not detect a shift in the interference pattern.
e. lacking the necessary precision to determine a shift in the interference pattern.
Answer:
The correct answer is option (c) a success because it did not detect a shift in the interference pattern.
Explanation:
In Michelson and Morley experiment it was considered to be successful.
They both found out that the experiment that was carried out was not a failure since it did not detect any shift in the interference pattern.
With this findings it was widely regarded as correct and precise.
A 5.50-kg bowling ball moving at 9.00 m/s collides with a 0.850-kg bowling pin, which is scattered at an angle of 85.0 0 to the initial direction of the bowling ball and with a speed of 15.0 m/s. (a) Calculate the final velocity (magnitude and direction) of the bowling ball.
Answer:
9.05 m/s , -14.72° (respect to x axis)
Explanation:
To find the final velocity of the bowling ball you take into account the conservation of the momentum for both x and y component of the total momentum. Then, you have:
[tex]p_{xi}=p_{xf}\\\\p_{yi}=p_{yf}\\\\[/tex]
[tex]m_1v_{1xi}+m_2v_{2xi}=m_1v_1cos\theta+m_2v_{2}cos\phi\\\\0=m_1v_1sin\theta-m_2v_2sin\phi[/tex]
m1: mass of the bowling ball = 5.50 kg
m2: mass of the bowling pin = 0.850 kg
v1xi: initial velocity of the bowling ball = 9.0 m/s
v2xi: initial velocity of bowling pin = 0m/s
v1: final velocity of bowling ball = ?
v2: final velocity of bowling pin = 15.0 m/s
θ: angle of the scattered bowling pin = ?
Φ: angle of the scattered bowling ball = 85.0°
Where you have used that before the bowling ball hits the pin, the y component of the total momentum is zero.
First you solve for v1cosθ in the equation for the x component of the momentum:
[tex]v_1cos\theta=\frac{m_1v_{1xi}-m_2v_2cos\phi}{m_1}\\\\v_1cos\theta=\frac{(5.50kg)(9.0m/s)-(0.850kg)(15.0m/s)cos85.0\°}{5.50kg}\\\\v_1cos\theta=8.79m/s[/tex]
and also you solve for v1sinθ in the equation for the y component of the momentum:
[tex]v_1sin\theta=\frac{(0.850kg)(15.0m/s)sin(85.0\°)}{5.50kg}\\\\v_1sin\theta=2.3m/s[/tex]
Next, you divide v1cosθ and v1sinθ:
[tex]\frac{v_1sin\theta}{v_1cos\theta}=tan\theta=\frac{2.3}{8.79}=0.26\\\\\theta=tan^{-1}(0.26)=14.72[/tex]
the direction of the bawling ball is -14.72° respect to the x axis
The final velocity of the bawling ball is:
[tex]v_1=\frac{2.3m/s}{sin\theta}=\frac{2.3}{sin(14.72\°)}=9.05\frac{m}{s}[/tex]
hence, the final velocity of the bawling ball is 9.05 m/s
An industrial flywheel (a solid disk) of mass 10.0 kg and radius 17.3 cm is rotating at an angular speed of 22.0 rad/s. Upon being switched to a slower setting, the flywheel uniformly slows down to 13.5 rad/s after rotating through an angle of 13.8 radians. Calculate the angular acceleration of the flywheel in the process of slowing down
Answer:
Explanation:
During slowing down , initial angular velocity ω₁ = 22 rad /s
final angular velocity ω₂ = 13.5 rad /s
using the law's of motion formula for rotation
ω₂² = ω₁² + 2 αθ , α is angular acceleration and θ is angle in radian rotated during this period
13.5² = 22² - 2xα x 13.8
2xα x 13.8 = 484 - 182.25
α = 10.93 rad / s²
What’s the answer to this question?
Answer:
6 A
Explanation:
Parallel connected resistors needs to be calculated as one single resistor. To do that: [tex]\frac{1}{15}[/tex]+[tex]\frac{1}{15}[/tex]+[tex]\frac{1}{15}[/tex]=[tex]\frac{3}{15}[/tex]=[tex]R^{-1}[/tex]
[tex]\frac{3}{15} ^{-1}[/tex]= 5 Ω (total resistance)
U = R* I
[tex]\frac{U}{R}[/tex]=I
[tex]\frac{30}{5}[/tex]=6 A
Julie throws a ball to her friend Sarah. The ball leaves Julie's hand a distance 1.5 meters above the ground with an initial speed of 16 m/s at an angle 32 degrees; with respect to the horizontal. Sarah catches the ball 1.5 meters above the ground.
1) What is the horizontal component of the ball’s velocity when it leaves Julie's hand?
2) What is the vertical component of the ball’s velocity when it leaves Julie's hand?
3) What is the maximum height the ball goes above the ground?
4) What is the distance between the two girls?
5) How high above the ground will the ball be when it gets to Julie? (note, the ball may go over Julie's head.)
Answer:
Explanation:
1. [tex]V_{x}[/tex] = [tex]V_{0}[/tex] * cos[tex]\alpha[/tex] ⇒ 16*cos32 ≈ 13.6 m/s (13.56)
2. [tex]V_{y}[/tex] = [tex]V_{0}[/tex] * sin[tex]\alpha[/tex] ⇒ 16* sin32 ≈ 9.4 m/s
3. [tex]y_{max}[/tex] = [tex]\frac{v_{0}^2*sin^2\alpha}{2g}[/tex]= [tex]\frac{16^2*sin^232}{2*9.8}[/tex] (the g (gravity) depends on the country but i'll take the average g which is 9.2m/s^2)
[tex]y_{max}[/tex] ≈ 3.6677+1.5 ≈ 5.2m
4. [tex]x_{max}[/tex] = [tex]\frac{v_{0}^2*sin(2\alpha)}{g}[/tex]=[tex]\frac{16^2*sin(2*32)}{9.8}[/tex] ≈ 23.5m (23.47)
5. -
answer 4 could be wrong, not certain about that one and i don't know 5
A 110-kg football player running at 8.00 m/s catches a 0.410-kg football that is traveling at 25.0 m/s. Assuming the football player catches the ball with his feet off the ground with both of them moving horizontally, calculate: the final velocity if the ball and player are going in the same directio
Answer:[tex]8.062\ m/s[/tex]
Explanation:
Given
masss of football player [tex]M=110\ kg[/tex]
Velocity of football player [tex]u_1=8\ m/s[/tex]
mass of football [tex]m=0.41\ kg[/tex]
velocity of football [tex]u_2=25\ m/s[/tex]
Final velocity will be given by applying conservation of linear momentum
After catching the ball Player and ball moves with same velocity
[tex]\Rightarrow Mu_1+mu_2=(M+m)v[/tex]
[tex]\Rightarrow 110\times 8+0.41\times 25=(110+0.41)v[/tex]
[tex]\Rightarrow 880+10.25=110.41\times v[/tex]
[tex]\Rightarrow v=\frac{890.25}{110.41}=8.063\ m/s[/tex]
So, final velocity will be [tex]8.062\ m/s[/tex]
Although these quantities vary from one type of cell to another, a cell can be 2.2 micrometers in diameter with a cell wall 40 nm thick. If the density (mass divided by volume) of the wall material is the same as that of pure water, what is the mass (in mg) of the cell wall, assuming the cell to be spherical and the wall to be a very thin spherical shell?
Answer:
m = 6.082 x 10⁻¹⁶ kg = 6.082 x 10⁻¹⁰ mg
Explanation:
First, we find the the surface area of the cell wall. Since, the cell is spherical in shape. Therefore, surface area of cell wall will be:
A = 4πr²
where,
A = Surface Area = ?
r = Radius of Cell = Diameter/2 = 2.2 μm/2 = 1.1 μm = 1.1 x 10⁻⁶ m
Therefore,
A = 4π(1.1 x 10⁻⁶ m)²
A = 15.2 x 10⁻¹² m²
Now, we find the volume of the cell wall. For that purpose, we use formula:
V = At
where,
V = Volume of the Cell Wall = ?
t = Thickness of Wall = 40 nm = 4 x 10⁻⁸ m
Therefore,
V = (15.2 x 10⁻¹² m²)(4 x 10⁻⁸ m)
V = 60.82 x 10⁻²⁰ m³
Now, to find mass of cell wall, we use formula:
ρ = m/V
m = ρV
where,
ρ = density of water = 1000 kg/m³
m = Mass of Wall = ?
Therefore,
m = (1000 kg/m³)(60.82 x 10⁻²⁰ m³)
m = 6.082 x 10⁻¹⁶ kg = 6.082 x 10⁻¹⁰ mg
The mass of the cell wall in mg is 6.082 × 10⁻¹⁰ mg
Since we assume the cell to be spherical and the wall to be a thin spherical shell, the volume of the cell wall V = At where
A = surface area of cell = 4πR² where R = radius of cell = 2.2 μm/2 = 1.1 × 10⁻⁶ m and t = thickness of cell wall = 40 nm = 40 × 10⁻⁹ m.Volume of cell wallSo, V = 4πR²t
Substituting the values of the variables into the equation, we have
V = 4πR²t
V = 4π(1.1 × 10⁻⁶ m)² × 40 × 10⁻⁹ m.
V = 4π(1.21 × 10⁻¹² m²) × 40 × 10⁻⁹ m.
V = 193.6π × 10⁻²¹ m³
V = 608.21 × 10⁻²¹ m³
V = 6.0821 × 10⁻¹⁹ m³
V ≅ 6.082 × 10⁻¹⁹ m³
Mass of the cell wallWe know that density of cell wall, ρ = m/v where m = mass of cell wall and V = volume of cell wall.
Making m subject of the formula, we have
m = ρV
Since we assume the density of the cell wall to be equal to that of pure water, ρ = 1000 kg/m³
So, m = ρV
m = 1000 kg/m³ × 6.082 × 10⁻¹⁹ m³
m = 6.082 × 10⁻¹⁶ kg
Converting to mg, we have
m = 6.082 × 10⁻¹⁶ kg × 10⁶ mg/kg
m = 6.082 × 10⁻¹⁰ mg
So, the mass of the cell wall in mg is 6.082 × 10⁻¹⁰ mg
Learn more about mass of cell wall here:
https://brainly.com/question/13173768
The first antiparticle, the positron or antielectron, was discovered in 1932. It had been predicted by Paul Dirac in 1928, though the nature of the prediction was not fully understood until the experimental discovery. Today, it is well accepted that all fundamental particles have antiparticles.
Suppose that an electron and a positron collide head-on. Both have kinetic energy of 3.58 MeV and rest energy of 0.511 MeV. They produce two photons, which by conservation of momentum must have equal energy and move in opposite directions. What is the energy Eloton of one of these photons?
Answer:
4.09 MeV
Explanation:
Find the given attachment
Un levantador de pesas puede generar 3000 N de fuerza ¿Cuál es el peso máximo que puede levantar con una palanca que tiene un brazo de la fuerza de 2 m y un brazo de resistencia de 50 cm?
Responder: 12000N
Explicación: Usando la fórmula para encontrar la eficiencia de una máquina. Eficiencia = ventaja mecánica / relación de velocidad × 100%
Dado MA = Carga / Esfuerzo
Relación de velocidad = distancia recorrida por esfuerzo (brazo de fuerza) / distancia recorrida por carga (brazo de resistencia)
MA = Carga / 3000
VR = 2 / 0.5 VR = 4
Asumiendo que la eficiencia es 100% 100% = (Carga / 3000) / 4 × 100%
1 = (Carga / 3000) / 4
4 = Carga / 3000
Carga = 4 × 3000
Carga = 12000N
Esto significa que el peso máximo que se puede levantar es 12000N
What is The mass of an electron
PLS HELP,WILL GIVE BRAINLIEST + 30 POINTS
Describe how fractional distillation and cracking are used so that sufficient petrol is produced from crude oil to meet demand.
Answer:
☟
Explanation:
Fuels made from oil mixtures containing large hydrocarbon molecules are not efficient as they do not flow easily and are difficult to ignite. Crude oil often contains too many large hydrocarbon molecules and not enough small hydrocarbon molecules to meet demand. This is where cracking comes in.
Cracking allows large hydrocarbon molecules to be broken down into smaller, more useful hydrocarbon molecules. Fractions containing large hydrocarbon molecules are heated to vaporise them. They are then either:
heated to 600-700°C
passed over a catalyst of silica or alumina
These processes break covalent bonds in the molecules, causing thermal decompositionreactions. Cracking produces smaller alkanesand alkenes (hydrocarbons that contain carbon-carbon double bonds). For example:
hexane → butane + ethene
C6H14 → C4H10 + C2H4
Some of the smaller hydrocarbons formed by cracking are used as fuels, and the alkenes are used to make polymers in plastics manufacture. Sometimes, hydrogen is also produced during cracking.
Fractional distillation of crude oil
Fractional distillation separates a mixture into a number of different parts, called fractions.
A tall fractionating column is fitted above the mixture, with several condensers coming off at different heights. The column is hot at the bottom and cool at the top. Substances with high boiling points condense at the bottom and substances with lower boiling points condense on the way to the top.
Crude oil is a mixture of hydrocarbons. The crude oil is evaporated and its vapours condense at different temperatures in the fractionating column. Each fraction contains hydrocarbon molecules with a similar number of carbon atoms and a similar range of boiling points.
Oil fractions
The diagram below summarises the main fractions from crude oil and their uses, and the trends in properties. Note that the gases leave at the top of the column, the liquids condense in the middle and the solids stay at the bottom.
As you go up the fractionating column, the hydrocarbons have:
lower boiling points
lower viscosity (they flow more easily)
higher flammability (they ignite more easily).
Other fossil fuels
Crude oil is not the only fossil fuel.
Natural gas mainly consists of methane. It is used in domestic boilers, cookers and Bunsen burners, as well as in some power stations.
Coal was formed from the remains of ancient forests. It can be burned in power stations. Coal is mainly carbon but it may also contain sulfur compounds, which produce sulfur dioxide when the coal is burned. This gas is a cause of acid rain. Also, as all fossil fuels contain carbon, the burning of any fossil fuel will contribute to global warming due to the production of carbon dioxide.
In fractional distillation, the crude oil is added to the chamber and heated. The components with the highest boiling point will condense in the lower part of the column and the components with the lower boiling point will condense at the top of the column. Petrol with a low boiling point is collected from the top of the column.
What is fractional distillation?Fractional distillation can be described as the separation of a mixture into its component fractions. The chemical compound is separated by heating them to a temperature at which fractions of the mixture will vaporize.
Generally, the components have boiling points that differ by less than 25 °C from each other under one atmosphere. When the mixture is heated, the component with the lower boiling point boils and changes to vapours.
The more volatile component remains in a vapour state and repeated distillations are used in the process, and the mixture is separated into component parts.
Therefore, the petrol from the crude oil can easily be separated as it has a boiling point of about 25-60°C.
Learn more about fractional distillation, here:
https://brainly.com/question/29037176
#SPJ2
A certain type of laser emits light that has a frequency of 4.6 x 1014 Hz. The light, however, occurs as a series of short pulses, each lasting for a time of 3.1 x 10-11s. The light enters a pool of water. The frequency of the light remains the same, but the speed of light slows down to 2.3 x 108 m/s. In the water, how many wavelengths are in one pulse
Answer:
14,260
Explanation:
Relevant data provided for computing the wavelengths are in one pulse is here below:-
The number of wavelengths in Ls = [tex]4.6\times 10_1_4[/tex]
Therefore the Number of in time = Δt = [tex]3.1\times 10_-_1_1[/tex]
The number of wavelengths are in one pulse is shown below:-
[tex]Number\ of\ wavelengths = \triangle t\times f[/tex]
[tex]= 3.1\times 10_-_1_1\times 4.6\times 10_1_4[/tex]
= 14,260
Therefore for computing the number of wavelengths are in one pulse we simply applied the above formula.