Answer:
The average atomic mass of copper is 63.55 amu.
Explanation:
hope this help
GIVING BRAINLIEST :D
If water is added to 100. mL of a 0.150 M NaOH solution until the final volume is 150. mL, what will the molarity of the diluted solution be?
Answer:
0.1 M molar NaaOH
Explanation:
M1V1= M2V2
M1 = 0.150M NaOH
V1=100 ml
V2=150 ml
M2=?
M2= M1V1/V2
M2= 0.150*100/150=0.1 M
solid zinc reacts with oxide to form zinc oxide
Answer:
2Zn(s) + O2(g)------2Zno
There are two opposing processes that occur in a solution in contact with undissolved solute. These are dissolving and ________.
Answer:
Two process that occur are dissolving and solvent
Which is the Lewis dot structure for H3PO4?
Answer:A
Explanation:
somebody please help me!!
Answer:
The given isotope is Br 80
If 35 protons present then its atomic number is 35
Mass number is 80 so its meutrons are 45 because proton+ neutron = mass number
Its electron are 36 because of negative one charge
Explanation:
Calculate the moles of 336 L of carbon dioxide gas (CO2) at STP.
Answer:
14.99 mols of CO2
Explanation:
STP= 273 k , 1 atm , .0821 gas constant
N=PV/RT
N= 1x336/.0821x273
14.99 mols of CO2
659.6 grams of CO2
an atom has 24 protons and 23 electrons and 28 neutrons what charge does this atom have?
-4
+4
-1
+1
Answer:
1+
Explanation:
the number of protons tells you which element it is in the periodic table, you can notice that there is 1 less electron that then there is protons which means that the element had to give 1 electron away. When you get rid of 1 e- you have 1 proton more that electrons so that's why it's 1+
also the element is Cr
An element with a high ionization energy would most likely be what type of element?
A.
metal with a high electronegativity
O
B.
non-metal with a low electronegativity
o
C.
non-metal with a high electronegativity
O
D.
metal with a low electronegativity
Answer:
C
Explanation:
It is most likely non metal with a high electronegativity.
Which of the following is a way that human modification of limiting factors causes unbalance in ecosystems.
Answer:
D. all of the above
Explanation:
edg 2021
A way that human modification of limiting factors causes unbalances in ecosystems. are habitat loss, pollution, and climate change. Option D. This is further explained below.
What is an ecosystem.?Generally, An ecosystem is a geographical region in which plants, animals, and other species, as well as weather and topography, coexist to produce a circle.
In conclusion, habitat loss, pollution, and climate change are all human modification of limiting factors causes unbalance in ecosystems.
Read more about Population
https://brainly.com/question/7301139
#SPJ2
CQ
which of the following is a way that human modification of limiting factors causes unbalance in ecosystems? a. habitat loss b. pollution c. climate changes d. all of the above
Substances that dissolve in water nd give up OH-ions are considered what
Your answer would be an Arrhenius base
Hope this helps
Identify arrows pointing to bonding electrons.
Answers:
Identify arrows pointing to bonding electrons.
✔ a, b, d
Identify arrows pointing to nonbonding electrons.
✔ c
Identify arrows pointing to structures containing sigma bonds.
✔ a, b, d
Identify arrows pointing to structures containing pi bonds.
✔ a
Explanation:
all the parts for those who need it!
these are all correct on edge! <3
Your question is incomplete. Please check below the full content
Identify arrows pointing to bonding electrons
a)✔a, b, d
b)✔ c
c)✔ a, c, b
d)✔ a
Identify arrows pointing to bonding electrons.
✔ a, b, d
Which type of bond is indicated by an arrow?The coordinate covalent bond is shown by an arrow with its head pointing towards the direction of the donation of an electron pair, as shown in Figure 2.
What are 5 examples of covalent bonds?Here are 5 examples of covalent compounds
1 Hydrogen (H2) Hydrogen (H) is the simplest of all elements.
2 Oxygen (O2).
3 Nitrogen (N2).
4 Water (H2O).
5 Carbon Dioxide (CO2).
Learn more about bonding electrons at
https://brainly.com/question/18258856
#SPJ2
Which statement describes the rock cycle?
A. A series of processes on Earth's surface and interior that slowly erodes rocks from one kind to another
B. A series of processes on Earth's surface and interior that slowly changes rocks from one kind to another
C. A series of processes on Earth's surface and interior that quickly changes rocks from one kind to another
D. A series of processes on Earth's surface that slowly changes rocks from one kind to another
Answer:
D
Explanation:
it slowly changes rocks or minarials it puts it under pressure and compacks it and it forms a rock for example
what are the type of mixture in calloid, suspension and solution
Homogeneous and heterogeneous mixture in colloid, suspension and solution
A colloid is a heterogeneous mixture in which the dispersed particles are intermediate in size between those of a solution and a suspension and within the categories of homogeneous and heterogeneous mixtures there are more specific types of mixtures including solutions is alloys, suspensions, and colloids and a solution is a mixture where one of the substances dissolves in the other and the substance that dissolves is called the solute
Know more about mixture
https://brainly.com/question/1203901
#SPJ1
According to Periodic Law, elements arranged in order of increasing atomic number are placed together in groups having
Answer: same valence shell configuration and properties
Explanation:
2. What is the mass of 5.3 moles of CaCl2?
Answer:
590 g CaCl₂
General Formulas and Concepts:
Chemistry - Atomic Structure
Reading a Periodic TableUsing Dimensional AnalysisExplanation:
Step 1: Define
5.3 mol CaCl₂
Step 2: Identify Conversions
Molar Mass of Ca - 40.08 g/mol
Molar Mass of Cl - 35.45 g/mol
Molar Mass of CaCl₂ - 40.08 + 2(35.45) = 110.98 g/mol
Step 3: Convert
[tex]5.3 \ mol \ CaCl_2(\frac{110.98 \ g \ CaCl_2}{1 \ mol \ CaCl_2} )[/tex] = 588.194 g CaCl₂
Step 4: Check
We are given 2 sig figs. Follow sig fig rules and round.
588.194 g CaCl₂ ≈ 590 g CaCl₂
Please help!!! Thank youuu I’ll give brainlist to first to get them right
questions 3 gravity
question 1 meteorites
question 2 orbit
question 4 rocket and gaseous
Answer:
1. moons 2. orbits 3. gravity 4. rocky, gaseous
Explanation:
calculates the equivalent mass of calcium chlorate CA (CI03) 2
Answer:
207g
Explanation:
Given compound:
Ca(ClO₃)₂
The equivalent mass can be derived by summing the molar masses of each atom
Molar mass of Ca = 40
Cl = 35.5
O = 16
Now solve;
Molar mass = 40 + 2(35.5 + 3(16)) = 207g
What does oxygen to do to iron
4. Compare the diagrams of the two substances shown below.
a. Use your understanding of structure to predict which substance is a gas at room temperature and which is a
at room temperature.
b. Explain your answer using your understanding of the relationship between structure and properties of
substances.
bond-
silicon atom
oxygen atom
Answer:
the anserw is 2
Explanation:
What should be done in order to increase the gravitational force between two objects?
Answer:
Decrease the distance between them or increase the mass.
Explanation:
F= GM1M2/ R²
Answer:
decrease the distance between the objects
Explanation:
i did the test and got da epic 100 score
Which of these discoveries contradict components of Dalton’s atomic theory?
Dalton's atomic theory was proposed by John Dalton in 1803. It states that elements are made up of indivisible atoms, atoms of the same element are identical, and atoms cannot be created or destroyed.
What is Dalton's atomic theory?Dalton proposed that the concept of atoms might be used to explain the laws of definite proportions and the conservation of mass. In his theory, atoms—which he described as "solid, massy, hard, impenetrable, moving particle(s),"—are the minuscule, indivisible units that make up all matter.
It is significant to highlight that Dalton had no knowledge of the potential existence of interior structure in atoms because he lacked the tools necessary to observe or perform further experiments on individual atoms. In a molecular modeling kit, where the various components are represented by spheres of various sizes and hues, we may imagine Dalton's atom as a component. We now know that atoms are not solid spheres, despite the fact that this paradigm is useful in some situations.
To learn more about Dalton's atomic theory from the given link:
https://brainly.com/question/2333980
#SPJ4
what are the type of reactions in activation energy?
Answer:
n chemistry and physics, activation energy is the energy that must be provided to compounds to result in a chemical reaction.The activation energy (Eₐ) of a reaction is measured in joules per mole (J/mol), kilojoules per mole (kJ/mol) or kilocalories per mole (kcal/mol). Activation energy can be thought of as the magnitude of the potential barrier (sometimes called the energy barrier) separating minima of the potential energy surface pertaining to the initial and final thermodynamic state. For a chemical reaction to proceed at a reasonable rate, the temperature of the system should be high enough such that there exists an appreciable number of molecules with translational energy equal to or greater than the activation energy. The term Activation Energy was introduced in 1889 by the Swedish scientist Svante Arrhenius.
Explanation:
Answer:
The activation energy for the forward reaction is the amount of free energy that must be added to go from the energy level of the reactants to the energy level of the transition state. The source of activation energy is typically heat, with reactant molecules absorbing thermal energy from their surroundings.
Explanation:
ОА
H+ HH
O H+ H → He
Oc He+
TH
Не
ODH +
Η
>
Ao H+HH OH
santa said he will eat shower curtian at 2 am
A meterorite has velocity of 1544 m/s and a mass of 45 kg. Find its momentum
Answer:
69,480 kg.m/sExplanation:
The momentum of an object can be found by using the formula
momentum = mass × velocity
From the question we have
momentum = 45 × 1544
We have the final answer as
69,480 kg.m/sHope this helps you
Answer:
69,480 kg. m/s
have a nice day!
A 36.0 g sample of metal was heated from 0°C to 55.0°C. It absorbed 150 J of
energy as heat. What is the specific heat of this piece of metal?
Motino
abiD
A 36.0 g sample of metal was heated from 0°C to 55.0°C. It absorbed 150 J of energy as heat then the specific heat of this piece of metal is 0.0758 J/g.°C .
The term "specific heat" refers to the amount of energy needed to raise a substance's unit mass by one degree Celsius. This can be mathematically stated as:
q = m×c×ΔT,
where ,
q = the amount of heat
m = the mass of the substance
c = the respective substance's specific heat;
ΔT = the change in temperature.
So, if we want to determine the units for specific heat, we'll just isolate the term in the above formula to get
c = q / m × ΔT ( i )
Since heat is measured in Joules ( J ) , mass in grams ( g ) , and temperature in degree Celsius , we can determine that specific heat capacity from equation ( i ) by putting all the given data in this equation ,
c = 150 J / 36.0 g × 55.0 °C = 150 J / 1980 g.°C = 0.0758 J/g.°C
Therefore, specific heat is measured in Joules per g times degree Celsius.
learn more about specific heat here ,
https://brainly.com/question/11297584
#SPJ1
which of these characteristics of all animal cells ? check all that apply
they contain a nucleus .
they are eukaryotic.
they lack member-bond organelles.
they lack in nucleus.
they are prokaryotic.
they contain member-bond organelles.
Answer:
They contain member-bond organelles.Explanation:
I hope l helped you. Please follow me. ❤❤❤All the following are compounds except. A.water. B.sugar solution. C.aqueous. D.sulphur dioxide
Answer:
B.sugar solution
Explanation:
A sugar solution is not a compound.
Rather, the solution is a mixture and an impure substance.
A compound is composed of two or more kinds of atoms or elements joined in a definite grouping .The properties of the compound is distinct from those of the individual atoms that makes them. Sugar solution is sugar and waterIt is made up of two compounds not chemically combined.Hypertonic, Isotonic, or Hypotonic
cell biology
Statements 6,9,13,14 are hypertonic, 8,10,12 hypotonic, and 7,11,15 are isotonic solutions.
6. Hypertonic
7. Isotonic
8. Hypotonic
9. Hypertonic
10. Hypotonic
11. Isotonic
12. Hypotonic
13. Hypertonic
14. Hypertonic
15. Isotonic
A hypertonic answer is any external solution that has excessive solute awareness and coffee water concentration as compared to frame fluids. In a hypertonic answer, the internet movement of water will be out of the frame and into the solution.
A hypotonic answer has a decreased awareness of solutes than some other answer. In biology, a solution outdoor of a cell is referred to as hypotonic if it has a decreased attention of solutes relative to the cytosol. because of osmotic stress, water diffuses into the cell, and the cell often appears turgid, or bloated.
A solution that has the same salt concentration as cells and blood. Isotonic answers are typically used as intravenously infused fluids in hospitalized sufferers. Isotonic solutions include electrolyte stability just like plasma in the bloodstream. whilst an isotonic solution is administered, the fluid extent of the affected person is elevated without a fluid shift. not unusual examples of isotonic solutions are zero.nine% ordinary saline and lactated ringers.
Learn more about Hypertonic solutions here:- https://brainly.com/question/1561046
#SPJ1
1.
A sample of helium gas is heated from 20.0°C to 40.0°C. This heating
process causes the gas to exland to a volume of 585 mL. What was
the original volume of the helium gas?
Answer:
V₂ = 530.5 mL
Explanation:
Given data:
Initial temperature = 20.0°C
Final temperature = 40.0 °C
Final volume = 585 mL
Initial volume = ?
Solution:
Initial temperature = 20.0°C (20+273 = 293 K)
Final temperature = 40.0 °C (40+273 = 323 K)
Solution:
The given problem will be solve through the Charles Law.
According to this law, The volume of given amount of a gas is directly proportional to its temperature at constant number of moles and pressure.
Mathematical expression:
V₁/T₁ = V₂/T₂
V₁ = Initial volume
T₁ = Initial temperature
V₂ = Final volume
T₂ = Final temperature
Now we will put the values in formula.
V₁/T₁ = V₂/T₂
V₁ = V₂T₁ /T₂
V₂ = 585 mL × 293 K / 323 K
V₂ = 171405 mL.K / 323 K
V₂ = 530.5 mL
which graph above best represents the relationship between the volume and the pressure of a gas?
The graph (A) best represents the relationship between the volume and the pressure of a gas.
What is pressure?The force was applied perpendicular to an object's surface per unit area across which that force is spread is known as pressure. The relationship between pressure and volume can be understand with the aid of ideal gas law.
PV=nRT.
where, P is pressure, V is volume.
It can be seen that when temperature will kept constant then pressure will be inversely proportional to the volume. It can be shown as:
P ∝ 1/V.
Therefore, graph A represent relationship between pressure (P) and volume (V).
To know more about pressure.
https://brainly.com/question/14760196.
#SPJ2