The diagram below shows a 5.0-kilogram bucket of water being swung in a horizontal circle of 0.70-meter radius
at a constant speed of 2.0 meters per second.
5.0-kg Bucket
0.70 m
The magnitude of the centripetal force on the bucket of water is approximately
1) 5.7 N
2) 14 N
3) 29 N
4) 200 N

Answer:

The magnitude of acceleration is 2m/s² .

Explanation:

First, you have to find the velocity as it starts to travel 200m in 10s. The formula of velocity is V = Distance/Time, then you have to substitute the values into the formula :

[tex]v = d \div t[/tex]

[tex]let \: d = 200 \\ let \: t = 10[/tex]

[tex]v = 200 \div 10[/tex]

[tex]v = 20m/s[/tex]

Next, you have to substitute the values into the acceleration formula, a = (v-u)/t where v represents final velocity, u is initial velocity and t is time taken :

[tex]a = \frac{v - u}{t} [/tex]

[tex]let \: v = 20 \\ let \: u = 0 \\ let \: t = 10[/tex]

[tex]a = \frac{20 - 0}{10} [/tex]

[tex]a = \frac{20}{10} [/tex]

[tex]a = 2m/ {s}^{2} [/tex]

Answer:

X: Absorbs energy from the core.

Y: Releases energy to the photosphere.

Explanation:

Convection is a mode of heat transfer through fluids (liquids or gas), and it requires material medium for its propagation.

The energy absorbed from the core of the Sun, is transferred through X (convection zone) by convectional process, and it flows to Y (radiative zone). Since the regions X and Y have different functions, the heat propagates from X causing photons to traverse through Y where it get released into the photosphere or the Sun's surface.

Therefore;

X: Absorbs energy from the core.

Y: Releases energy to the photosphere.

Answer:

X: Takes longer for photons to move through

Y: Releases energy to the photosphere

Explanation:

Answer: C. (Force = 2, time = 4.5)

Explanation:

J = FΔt

A. J = 5*2

A. J = 10

B. J = 1*8.5

B. J = 8.5

C. J = 2*4.5

C. J = 9

D. J = 3*2

D. J = 6

Answer:

C. (Force = 2, time = 4.5)

Answer:

space , small amount of gravity is found in the space ,infact we can say that there is no gravity in the space

Answer:

Poles

Explanation:

The gravitational force is maximum at the equator and minimum at the poles.

because as the distance increases the gravitational force decreases so the weight of a body decreases

Answer:

Weight of the body decreases with increase in distance from the Earth because weight is inversely proportional to distance from the Earth which means Weight of the body decreases with increase in distance from the Earth and vice versa. Also Weight is "gravitational force exerted on the body" so as the distance from the Earth increases , the "gravitational force" decreases.

Answer:

A

Explanation:

Answer: A

Explanation:

Answer:

I think it is better if you read and shortly write my explanation

Explanation:

simple pendulum with no friction, mechanical energy is conserved. Total mechanical energy is a combination of kinetic energy and gravitational potential energy. As the pendulum swings back and forth, there is a constant exchange between kinetic energy and gravitational potential energy.

Answer:

[tex]R_s = 0.093 \Omega[/tex]

Explanation:

Voltage of the car battery = 12.0 V

Voltage drop in the battery = 3.4 V

The remainder of the voltage is the starter voltage, that is:

Starter voltage = Initial battery voltage - voltage drop

Starter voltage = 12.0 - 3.4

Starter voltage, [tex]V_{s}[/tex] = 8.6 V

Current drawn by starter, [tex]I_s[/tex] = 93 A

According to Ohm's law: [tex]V_s = I_s R_s[/tex]

Starter Resistance, [tex]R_s[/tex] = [tex]V_s/I_s[/tex]

[tex]R_s = 8.6/93\\R_s = 0.093 \Omega[/tex]

The atomic number of a nucleus decreases during:

A. Nuclear fission and alpha decay

Alpha decay is an atomic rot process where a shaky core changes to one more component by shooting out a molecule made out of 2 protons and 2 neutrons. This catapulted molecule is known as an alpha molecule and is just a helium core.

It changes or 'rots' into an alternate nuclear core, with a mass number that is decreased by four and a nuclear number that is diminished by two.

Thus, option A is correct.

Find more information about Alpha decay here:

brainly.com/question/13512293

Acceleration = (change in speed) / (time for the change)

Change in speed = (speed after the change) - (speed before the change)

Change in speed = (65 m/s) - (35 m/s)  =  30 m/s

Acceleration = (30 m/s) / (5 s)

Acceleration = 6 m/s²

Answer:

B.The box experiences less friction on the marble floor

Explanation:

Answer:

B. The Box experiences less friction on the marble floor

Explanation:

This is because the the carpet is not a flat surface and the marble is smooth

Answer: It will not regain its shape, because when it is corked it can not replace the volume of material that you just take out of it.

Explanation:

When you squeeze the bottle, you are changing the volume of the bottle, in this process, you are "expelling" the material inside the bottle.

When you stop squeezing, there is a change in pressure, and the bottle "absorbs" air, until the pressure is equilibrated, and in this process, the bottle returns to the original shape.

Now, if you take the sauce out of the bottle and immediately cored it, then you removed the material inside of the bottle and did not let the bottle to "refill" the empty space with air, so it can not regain its shape.

Answer:

The wavelength of the wave is 2.34 nm.

Explanation:

It is required to find the wavelength of a [tex]1.28\times 10^{17}\ Hz[/tex] wave. A wave moves with a speed of light. Speed of a wave is given in terms of wavelength and frequency. So,

[tex]v=f\lambda[/tex]

[tex]\lambda=\dfrac{c}{f}\\\\\lambda=\dfrac{3\times 10^8}{1.28\times 10^{17}}\\\\\lambda=2.34\times 10^{-9}\ m\\\\\text{or}\\\\\lambda=2.34\ nm[/tex]

So, the wavelength of the wave is 2.34 nm.

The wavelength of the wave is 2.34 × 10⁻⁹ meters.

Given the data in the question;

Wavelength; [tex]\lambda =\ ?[/tex]

To determine the wavelength of the wave, we use the expression for the relations between wavelength, frequency and speed of light.

[tex]\lambda = \frac{c}{f}[/tex]

Where [tex]\lambda[/tex] is wavelength, f is frequency and c is speed of light ( [tex]3*10^8m/s[/tex] )

We substitute our values into the equation

[tex]\lambda = \frac{3*10^8m/s}{1.28*10^{17}Hz} \\\\\lambda = \frac{3*10^8m/s}{1.28*10^{17}s^{-1}} \\\\\lambda = 2.34 * 10^{-9}m[/tex]

Therefore, the wavelength of the wave is 2.34 × 10⁻⁹ meters.

Learn more: https://brainly.com/question/10674607

Answer:

[tex]v=\sqrt{\frac{ev}{m} }[/tex]

Explanation:

The helium ion has:

a potential difference in vacuum = V,

Charge = 2e

and mass = 4m,

speed = v,

mass = 4m

From electrostatics, the work done is the product of charge and its potential difference.

Therefore, Work done = charge × potential difference = 2e × V = 2eV

This work done is in form of kinetic energy, therefore:

Kinetic energy = 1/2 × mass × speed²

⇒  Work done = Kinetic energy

[tex]2eV=\frac{1}{2} *4m*v^2=2m*v^2\\v^2=\frac{2eV}{2m}\\ v^2=\frac{eV}{m}\\ v=\sqrt{\frac{ev}{m} }[/tex]

Answer: - 7500N

Explanation:

Given the following :

Initial Velocity of car = 108km/hr

Time taken to stop after applying brakes = 4s

Mass of passengers in car = 1000kg

Force exerted by the brakes on the car =?

After 4s, then final Velocity (V) = 0

Initial Velocity (u) of the car = 108km/hr

108km/hr = (108 × 1000)m ÷ (3600)s = 30m/s

Force exerted = mass(m) × acceleration(a)

Acceleration of car = Change in Velocity with time

a = (v - u) / t

a = (0 - 30) / 4

a = - 30/ 4

a = - 7.5m/s^2

Therefore,

Force exerted = mass(m) × acceleration(a)

Force exerted = 1000kg × (-7.5)m/s^2

Force exerted = - 7500N

Answer:

The force exerted by the brakes on the motor car is -7500 N.

Explanation:

Given :-

To find :-

Solution :-

Since the car stops, the final velocity (v) will be 0 m/s.

• Initial velocity (u) = 108 km/h.

Converting initial velocity into m/s.

We know that,[tex] \sf{1\:km/h=\dfrac{5}{18}\:m/s}[/tex]

Then initial velocity,

= [108 × 5/18 ] m/s

= 30 m/s

Now find the force exerted by the brakes.

★ Formula used :

[tex]{\boxed{\sf{F=\dfrac{m(v-u)}{t}}}}[/tex]

[tex]:\implies \sf \: F= \dfrac{1000(0 - 30)}{ 4} \\ \\ : \implies \sf \: F \: = \dfrac{ - 30000}{4} \\ \\ : \implies \sf \: F \: = - 7500[/tex]

The force exerted by the brakes on the motor car = -7500 N.

•The negative sign of force(F) means that the force was applied in opposite direction of motion.

Answer:

Explanation:

If you look at the chemistry behind most brake fluid, it comes from the combination of various types of glycols, which are basically a mixture of non-petroleum and other alcohol-based fluids. After a mixing process, the chemical name gets shortened to “polyglycol”. In addition, there are also high-grade silicone-based fluids, which cannot be mixed with any other type of fluid. So whether it's used in the brake or clutch system, it's important to understand the differences between these common types of brake fluid.

The brake fluid must maintain specific properties. Our brakes can get hot, sometimes up to 1200 degrees, so the fluid needs a high boiling point. Also, because our vehicles experience seasons just as we do, it’s important to have low freezing point as well. On top of maintaining both extremes, it's designed not to damage any rubber components in the brake system.

As a result, the chemical properties found in most brake fluids can permanently dull or damage paint. So be sure to handle with care and be quick to clean any accidental overspills. Brake fluid is hydroscopic, meaning it has a natural tendency to absorb moisture. And over enough time the added moisture can result in corrosion build up or a decreased boiling point. It’s never a bad idea to change your brake fluid every couple of years and try not to leave your reservoir cap off any longer than needed

Answer: high operation temperatures, good low-temperature and viscosity-temperature properties, physical and chemical stability, protection of metals from corrosion, inactivity with respect to mechanical rubber articles, and lubricating effect

Hope this helps

Answer:

3ohms

Explanation:

From Ohm's Law

V = IR

V is that voltage = 3volts

I = current = 1amp

R = resistance in ohms

Putting those values into the above formula.

3volts = 1amp×R

Making R the subject

R = 3/1

R = 3ohms

The resistance of the light bulb is 3ohms.

Explanation:

i think the sun is near the earth that's why we see the sun during the day and the moon is behind the sun so when it is in the night the moon will remove in front the sun and there will be night I hope it will help you

Answer:

a. 6 A

b. 3 V

Explanation:

a. By using Kirchoff's Junction Rule, which states that the current flowing into a junction must equal the current flowing out of it. As you can see in the first 3-way split, the current splits into 3A, 2A, and 1A. This means that when the 3 wires rejoin, the current must have a magnitude equal to the total of the current flowing in all 3 branches, which would equate to 3+2+1 = 6 A.

b. Voltage differences across branches of a parallel circuit are identical. This means that we can treat the 3 resistors as one, and say that the voltage drop across that whole area is 3 V. Since that is the only voltage drop in the circuit, the battery's voltage drop must also be 3 V to equate to it. This is explained by Kirchoff's Loop Rule.

Explanation:

they would formulate a new hypothesis with the same dependent variable but a different independent variable as a virginal hypothesis .

Answer:

a. V = (a - b)d/2ε₀ b. 2ε₀A/d

Explanation:

a. The potential difference between the plates

Using Gauss' law, we first find the electric field between the plates

ε₀∫E.dA = Q where Q = charge enclosed, E = electric field

Now Q = [a +(-b)]A = (a - b)A where + a and -b are the surface charge densities of the plates and A is the area of the plates.

ε₀∫E.dA = Q

ε₀∫EdAcos0 + ε₀∫EdAcos0 = (a - b)A

ε₀E∫dA + ε₀E∫dA = (a -b)A

ε₀EA + ε₀EA = (a -b)A

2ε₀EA = (a -b)A

E = (a - b)/2ε₀

We now find the potential difference, V between the plates from

V = ∫E.dl

V =E∫dl

V = Ed  where ∫dl = d the distance between the plates.

V = (a - b)d/2ε₀

b. The capacitance between them

Capacitance C = Q/V

= (a - b)A ÷ (a - b)d/2ε₀

= 2ε₀A/d

Answer:

  294.524 m^3

Explanation:

The volume of a cylinder is given by the formula ...

  V = πr^2h

For a radius of 2.5 m and a length of 15 m, the volume is ...

  V = π(2.5 m)^2(15 m) = 93.75π m^3 ≈ 294.524 m^3

The volume is about 294.52 cubic meters.

Answer:

i) O m/s² as velocity is constant

ii) 20m/s

iii)Hint:Calculate the area of the graph,that is;below the line, for the first 15 seconds only

Hope this helps.

Answer:

That due the the gravity anything that falls in its gravity accelerates by 25metres per second

Explanation:

Answer:

K.E = 1.13 × 10^5 J

When compared to;

K.E = a.bc X 10^d J

We can observe that;

a = 1

b = 1

c = 3

d = 5

Explanation:

Given;

Mass of rhinoceros m = 1000kg

Velocity v = 15m/s

The kinetic energy of the body at this speed is;

K.E = 0.5×mv^2 ........1

Substituting the values of m and v into equation 1;

K.E = 0.5×1000×15^2

K.E = 112500 J

K.E = 1.13 × 10^5 J

When compared to;

K.E = a.bc X 10^d J

We can observe that;

a = 1

b = 1

c = 3

d = 5

Answer:

P.E.=600Nm

Explanation:

m=30kg

g=10m/s²

h=2m

P.E.=?

as we know that

P.E.=mgh

P.E.=30kg×10m/s²×2m

P.E.=600Nm

Answer:

1298.5watt

Explanation:

Power is defined as the rate at which work is done

Expressed mathematically as;

P = F × d/ t; F = force or weight of object ;d is height or distance sustain and t is time covered

Hence for 1 person the power consumption is ;

Note weight =mass× acceleration of free fall due to gravity,g

g is known as 9.8m/S2

Time taken is 1min which is 60 sec

60 ×9.8 × 5.3/60 = 51.94 watt

Hence for 25 persons we have

25 × 51.94 =1298.5watt

1.3kilo watt( kilo is 1000)

The work done by the escalator is 3,080.4 joules and the power requirement of the escalator to move 25 passengers every minute is approximately 51.34 watts.

The Work Done is calculated as:

Force (F) = 60 × 9.8

Distance (d) = 5.30 meters

Work (W) = F × d

Work (W) = (60 × 9.8) × 5.30

Work (W) = 3,080.4 joules

The Power is calculated as:

Time (t) = 1 minute

Power (P) = Work / Tim (t)

Power (P) = 3,080.4 / 60

Power (P) = 51.34 watts

Therefore, the power requirement of the escalator to move 25 passengers every minute is approximately 51.34 watts.

To know more about the work done and power:

https://brainly.com/question/29369495

#SPJ4

Explanation:

2) C would need the least effort, because the longer the effort distance, the least the effort applied.