The mass of an electron is 9.11 x 10-31 kg. If you want to increase the speed of the
electron from 90% of the speed of light to 95% of the speed of light (where the
speed of light is 2.997x108 m/s), the amount of work that must be done is:
8.2 x 10-13)
0 3.2× 10-13 ,
O 2.6% 10-13 ,
O 7.4× 10-14 ,
3.8 x 10-15)

Answers

Answer 1

I'm not sure of this question, yet i know you may get angry but, just know your loved and if going through a hard time i'm so so sorry, i know how it feels it sucks. take care of yourself, drink water, listen to that one song that makes you dance in your room and go do what YOU love. your beautiful your perfect and dont listen to what anyone says. i love u, everyone loves u, i know its scary but it happens to everyone life isnt a peice of cake unfortunatly and it sucks but woahh your strong! if you need someone to talk to leave a comment below, happy hoildays everyone!

P.S, im looking into the answer of this question. I may not answer it right on time (since i'm not the smartest...) but i promise ill try my best! Also, i am not doing this for points im doing this to make others smile. I hate how no one checks up on anyone, lots of people are going through a stressful time (including me) and i just want to let everyone know that its okay not to be okay! I hope that you all find happiness in every possible situation, once again  HAPPY HOLIDAYS!


Related Questions

how much power an appliance uses

Answers

Answer:

it depends on the appliance

Explanation:

bigger appliances will use more power, smaller appliances will use a lesser amount

What is the gravitational force between two identical 5000 kg asteroids whose centers of mass are separated by 100 m?

Answers

Answer: 1.67 x 10^-7N

Explanation:

3. If an x-ray imaging system is operated at 800 mA, 2000 ms, the total
mAs will be?

Answers

569






Hdhehdhdndnjdnxhejehrhdhhdhdud

A circular parallel plate capacitor is constructed with a radius of 0.52 mm, a plate separation of 0.013 mm, and filled with an insulating material with dielectric constant of 40. If a potential is applied to this device of 2.0 mV, how much charge will accumulate on this capacitor, in terms of the number of charge carriers?

Answers

Answer:

289282

Explanation:

r = Radius of plate = 0.52 mm

d = Plate separation = 0.013 mm

A = Area = [tex]\pi r^2[/tex]

V = Potential applied = 2 mV

k = Dielectric constant = 40

[tex]\epsilon_0[/tex] = Electric constant = [tex]8.854\times 10^{-12}\ \text{F/m}[/tex]

Capacitance is given by

[tex]C=\dfrac{k\epsilon_0A}{d}[/tex]

Charge is given by

[tex]Q=CV\\\Rightarrow Q=\dfrac{k\epsilon_0AV}{d}\\\Rightarrow Q=\dfrac{40\times 8.854\times 10^{-12}\times\pi \times (0.52\times 10^{-3})^2\times 2\times 10^{-3}}{0.013\times 10^{-3}}\\\Rightarrow Q=4.6285\times 10^{-14}\ \text{C}[/tex]

Number of electron is given by

[tex]n=\dfrac{Q}{e}\\\Rightarrow n=\dfrac{4.6285\times 10^{-14}}{1.6\times10^{-19}}\\\Rightarrow n=289281.25\ \text{electrons}[/tex]

The number of charge carriers that will accumulate on this capacitor is approximately 289282.

Mistakes were made" is a classic passive voice confession. President Ronald Reagan famously said "mistakes were made" by his administration during the Iran Contra scandal. But some people said he wasn't directly taking the blame. This is why some writers choose to use the passive voice. It can sidestep the question of who did something.

Based on this passage, a writer may use the passive voice to

A
give the reader all known information about a criminal and his or her crimes.

B
clarify the person who was responsible for a crime.

C
describe a crime without blaming anyone for committing it.

D
take responsibility for committing a crime.

Answers

I believe the answer is C. If it isn’t then it is B. But I would go with C

Which one of the following statements contain a simile?

Answers

do u have the statements ?

Answer:

I don't know if its just me, but I don't see the statements so I'm not sure how to help answer your question.

The illustration shows a roller coaster and indicates four different positions the car might be at as it moves along the track. Identify at which point in the roller coaster's journey does it have the least potential energy and explain why. w​

Answers

Answer:

I got this question on Ap3x. The answer is Car C...I got it correct

Explanation:

This is because Car C is at the lowest point with the lowest amount of potential energy. Potential energy is stored at it's highest when it has the "potential" to fall, move, or etc. Car C seems to have gone farther down from the high point of the slope, meaning that most of the potential energy transformed into kinetic energy. All in all, Car C has the least potential energy. (Please give Brainliest, or not...your choice but this is the first question that I answered)

I'm getting conflicting information on brainly about this question. It's either fly-by or GPS satellites...


What constitute the most common way that images of space are captured?


A. Fly-by missions


B. Drones landing on planets


C. GPS satellites in Earth's orbit


D. Astronauts visiting the
international space center

Answers

Answer:

C

Explanation:

GPS satellites in Earth's orbit constitute the most common way that images of space are captured.

I hope this helps! And this is the real answer.

i think the answer is c

derivative equation of F = kx

Answers

Given that,

The equation is "F=kx"

To find,

The derivative equation.

Solution,

We are given with the given equation which is as follows :

F = kx ...(1)

Where, F is force, k is spring constant and x is distance covered by the spring

Differentiate equation (1) wrt x.

[tex]\dfrac{dF}{dx}=\dfrac{d}{dx}(kx)\\\\\dfrac{dF}{dx}=k[/tex]

As k is constant.

Hence, this is the required solution.

After concluding his research, which statements would Virchow agree with? Check all that apply.

O Living things come from nonliving things.

Cells can come from nonliving materials.

Frogs can come from mud.

O Living things can only
comeyom living things.

Cells come from pre-existing cells.

Answers

Answer:

A Living things can only come from living things.

B Cells come from pre-existing cells.

Explanation:

sorry if wrong e d g e 2022

Answer: D,E

Explanation:

I JUST TOOK IT

0.0884 moles of a diatomic gas
are in a piston. When the piston
is compressed, the temperature
drops by 18.8 K, and 83.7 J of
heat flow out. Find W.
(Be careful with + and - signs.
+W = expansion, +Q = added,
+AU = temp goes up)
(Unit = J)

Answers

Answer:

W = - 118.24 J (negative sign shows that work is done on piston)

Explanation:

First, we find the change in internal energy of the diatomic gas by using the following formula:

[tex]\Delta\ U = nC_{v}\Delta\ T[/tex]

where,

ΔU = Change in internal energy of gas = ?

n = no. of moles of gas = 0.0884 mole

Cv = Molar Specific Heat at constant volume = 5R/2 (for diatomic gases)

Cv = 5(8.314 J/mol.K)/2 = 20.785 J/mol.K

ΔT = Rise in Temperature = 18.8 K

Therefore,

[tex]\Delta\ U = (0.0884\ moles)(20.785\ J/mol.K)(18.8\ K)\\\Delta\ U = 34.54\ J[/tex]

Now, we can apply First Law of Thermodynamics as follows:

[tex]\Delta\ Q = \Delta\ U + W[/tex]

where,

ΔQ = Heat flow = - 83.7 J (negative sign due to outflow)

W = Work done = ?

Therefore,

[tex]-83.7\ J = 34.54\ J + W\\W = -83.7\ J - 34.54\ J\\[/tex]

W = - 118.24 J (negative sign shows that work is done on piston)

Answer:

-49.2

Explanation:

Trust me bro

I need help with magnitudes of net force

Answers

since both forces are equal and are in opposite directions, Fnet would be 0

if a block weight 60N and is lying on a side with area 2m by 3m. what is the pressure exerted on the surface?​

Answers

Answer:

10 Pa

Explanation:

Pressure is defined as force per unit area.

Mathematically, P= F/A where  P is pressure, F is force and A is area.

Force, F = 60 N

Area, A = 2*3 = 6m²

P = 60/6 = 10 Pa

Find the total current through this circuit

Answers

Answer:

I=0.02[amp]

Explanation:

Since the resistors are connected in series, we can find the total resistance.

[tex]Rt = 100 + 300+50\\Rt = 450[ohm][/tex]

Now we can use ohm's law which tells us that the voltage is equal to the product of resistance by the current.

[tex]V =I*R\\I=V/R\\I=9/450\\I=0.02[amp][/tex]

what kind of law of motion A car still moves for a short period even after the brakes

have been applied.​

Answers

Answer:

inertia of motion

Explanation:

.... ...

A supersonic aircraft flies at 3 km altitude at a speed of 1000 m/s on a standard day. How long after passing directly above a ground observer is the sound of the aircraft heard by the ground observer

Answers

Answer:

After 3seconds

Explanation:

A supersonic aircraft flies at 3 km altitude at a speed of 1000 m/s on a standard day. How long after passing directly above a ground observer is the sound of the aircraft heard by the ground observer

Using the formula for calculating speed expressed as;

Speed = Distance/Time

Given;

Distance = 3km = 3000m

Speed = 1000m/s

Required

How long after passing directly above a ground observer is the sound of the aircraft heard by the ground observer (Time)

From the formula;

Time = Distance/speed

Time = 3000/1000

Time = 3seconds

Hence the sound of the aircraft is heard after 3 seconds

A projectile is fired vertically from Earth's surface with an initial speed of 3.1 km/s. Neglecting air drag, how far above the surface of Earth will it go

Answers

Answer:

The maximum height reached by the projectile is 490.31 km.

Explanation:

Given;

initial velocity of the projectile, u = 3.1 km/s = 3100 m/s

acceleration due to gravity, g = 9.8 m/s²

The maximum height reached by the projectile is calculated as;

v² = u² - 2gh

where;

v is the final velocity of the projectile at maximum height = 0

h is the maximum height reached by the projectile

0 = u² - 2gh

2gh = u²

h = u² / 2g

h = (3100²) / (2 x 9.8)

h = 490306.122 m

h = 490.31 km

Therefore, the maximum height reached by the projectile is 490.31 km.

A cannonball is fired at a 45.0° angle and an initial velocity of 670 m/s. Assume no air resistance. What is the vertical component of the cannonball’s velocity? What is the horizontal component of the cannonball’s velocity?

473.8 m/s; 473.8 m/s
-525.2 m/s; 435.5 m/s
0 m/s; 670 m/s
-378 m/s; 378 m/s

Answers

Answer:

473.8 m/s; 473.8 m/s

Explanation:

Given the initial velocity U = 670m/s

Horizontal velocity Ux = Ucos theta

Vertical component of the cannon velocity Uy = Usin theta

Given

U = 670m/s

theta = 45°

horizontal component of the cannonball’s velocity = 670 cos 45

horizontal component of the cannonball’s velocity = 670(0.7071)

horizontal component of the cannonball’s velocity = 473.757m/s

Vertical component of the cannonball’s velocity = 670 sin 45

Vertical component of the cannonball’s velocity  = 670 (0.7071)

Vertical component of the cannonball’s velocity  = 473.757m/s

Hence pair of answer is 473.8 m/s; 473.8 m/s

How do objects at rest and in motion respond in the presence of an external, unbalanced force?

Answers

Explanation:

Objects at rest and in motion respond to the presence of an external unbalanced force by simple changing their magnitude of motion or position.

We have this knowledge from Newtons first law of motion "a body will remain in a state of rest or continue with uniform motion unless if it is acted upon by an external force".

When an external force acts on a body at rest, it will change the position of the body or set it motion. For a body in motion, an external force can make they come to rest or change the motion of the body

a train traveling at 48 m/s begins to slow down as it approaches a bend in the tracks. if it travels around the bend at a speed of 14 m/s and it takes 40 seconds to properly slow down what is the acceleration acting on the train during this time?

Answers

Answer:

The acceleration acting on the train during this

time of travel is 0.85m/s²

HOW TO CALCULATE ACCELERATION:

• The acceleration of a moving body can be calculated by using the formula below:

a = (v - u)/t

Where;

1. a = acceleration (m/s²)

2. v = final velocity (m/s) 3. u = initial velocity (m/s)

4. t = time (s)

According to this question, a = ?, v = 48m/s, u = 14m/s, t = 40s.

= (48 - 14)/40 a=

• a = 34/40

• a = 0.85m/s²

Therefore, the acceleration acting on the train during this time of travel is 0.85m/s².

Hope this helps!

Don't forget to mark me as Brainliest.

What happens to liquid nitrogen when it gets warmer?​

Answers

Answer:

see below

Explanation:

 It boils (or evaporates)  and becomes gaseous nitrogen like water turns to water vapor when it gets warm enough

Heating up the liquid nitrogen comes into a boil, making the nitrogen gas again, when they liquid nitrogen gets warmer, it expands.

A 100 g ball collides elastically with a 300 g ball that is at rest. If the 100 g ball was traveling
in the positive x-direction at 6.20 m/s before the
collision, what are the velocities of the two
balls after the collision?

Answers

Answer:

The magnitude of the velocities of the two balls after the collision is 3.1 m/s (each one).

Explanation:

We can find the velocity of the two balls after the collision by conservation of linear momentum and energy:

[tex] P_{1} = P_{2} [/tex]

[tex] m_{1}v_{1_{i}} + m_{2}v_{2_{i}} = m_{1}v_{1_{f}} + m_{2}v_{2_{f}} [/tex]

Where:

m₁: is the mass of the ball 1 = 100 g = 0.1 kg

m₂: is the mass of the ball 2 = 300 g = 0.3 kg

[tex]v_{1_{i}}[/tex]: is the initial velocity of the ball 1 = 6.20 m/s

[tex]v_{2_{i}}[/tex]: is the initial velocity of the ball 2 = 0 (it is at rest)

[tex]v_{1_{f}}[/tex]: is the final velocity of the ball 1 =?

[tex]v_{2_{f}}[/tex]: is the initial velocity of the ball 2 =?

[tex] m_{1}v_{1_{i}} = m_{1}v_{1_{f}} + m_{2}v_{2_{f}} [/tex]

[tex] v_{1_{f}} = v_{1_{i}} - \frac{m_{2}v_{2_{f}}}{m_{1}} [/tex] (1)        

Now, by conservation of kinetic energy (since they collide elastically):

[tex] \frac{1}{2}m_{1}v_{1_{i}}^{2} = \frac{1}{2}m_{1}v_{1_{f}}^{2} + \frac{1}{2}m_{2}v_{2_{f}}^{2} [/tex]          

[tex] m_{1}v_{1_{i}}^{2} = m_{1}v_{1_{f}}^{2} + m_{2}v_{2_{f}}^{2} [/tex]  (2)

By entering equation (1) into (2) we have:

[tex] m_{1}v_{1_{i}}^{2} = m_{1}(v_{1_{i}} - \frac{m_{2}v_{2_{f}}}{m_{1}})^{2} + m_{2}v_{2_{f}}^{2} [/tex]    

[tex] 0.1 kg*(6.20 m/s)^{2} = 0.1 kg*(6.2 m/s - \frac{0.3 kg*v_{2_{f}}}{0.1 kg})^{2} + 0.3 kg(v_{2_{f}})^{2} [/tex]            

By solving the above equation for [tex]v_{2_{f}}[/tex]:

[tex]v_{2_{f}} = 3.1 m/s [/tex]

Now, [tex]v_{1_{f}}[/tex] can be calculated with equation (1):

[tex] v_{1_{f}} = 6.20 m/s - \frac{0.3 kg*3.1 m/s}{0.1 kg} = -3.1 m/s [/tex]

The minus sign of [tex] v_{1_{f}}[/tex] means that the ball 1 (100g) is moving in the negative x-direction after the collision.

Therefore, the magnitude of the velocities of the two balls after the collision is 3.1 m/s (each one).

I hope it helps you!                  

Uranium-235 undergoes fission, forming krypton-92, barium-141, and 3
neutrons. The mass of the uranium-235 is greater than the total mass of the
products. Which statement explains this difference in mass?
A. Some of the mass was transformed into neutrons during the
process.
O B. Mass was destroyed and disappeared during the process.
C. Some of the mass was transformed into gases during the
process.
D. Mass was transformed into energy during the process.

Answers

Answer:

C

Explanation:

Some of the mass

Answer:

D. Mass was transformed into energy during the process.

Point charges are located at 3, 8, and 11 cm along the x-axis(+q, -2q, +q). What is the x-component of the force on the charge located at x=8 cm given that q=1.15nc?

Answers

Answer:

Approximately [tex]1.69 \times 10^{-23}\; {\rm N}[/tex].

Explanation:

Look up the value of Coulomb's Constant: [tex]k \approx 8.988 \times 10^{-9}\; {\rm N \cdot m^{2} \cdot C^{-2}}[/tex].

Consider point charges of magnitude [tex]q_{1}[/tex] and [tex]q_{2}[/tex]. If the distance between these charges is [tex]r[/tex], the magnitude of the electrostatic force between them would be [tex](k\, q_{1}\, q_{2}) / (r^{2})[/tex].

In this question, the two [tex](+q)[/tex] charges are [tex]5\; {\rm cm}[/tex] and [tex]3\; {\rm cm}[/tex] away from the center [tex](-2\, q)[/tex] charge, respectively. Convert units to standard unit of distance (meters, [tex]{\rm m}[/tex]) and charge (coulombs, [tex]{\rm C}[/tex]):

[tex]q = 1.15 \; {\rm nC} = 1.15 \times 10^{-9}\; {\rm C}[/tex].

[tex]\begin{aligned} 5\; {\rm cm} = 5\; {\rm cm} \times \frac{1\; {\rm m}}{100\; {\rm cm}} = 0.05\; {\rm m} \end{aligned}[/tex].

[tex]\begin{aligned} 3\; {\rm cm} = 3\; {\rm cm} \times \frac{1\; {\rm m}}{100\; {\rm cm}} = 0.03\; {\rm m} \end{aligned}[/tex].

The magnitude of the electrostatic forces on the [tex](-2\, q)[/tex] charge would be:

[tex]\begin{aligned}\frac{k\, q_{1}\, q_{2}}{r^{2}} &\approx \frac{1}{(0.05\; {\rm m})^{2}} \\ &\quad \times (8.988 \times 10^{-9}\; {\rm N \cdot m^{2} \cdot C^{-2}})\\ &\quad \times ((-2) \, (1.15\times 10^{-9}\; {\rm C}))\, (1.15\times 10^{-9}\; {\rm C})) \\ &\approx 9.509\times 10^{-24}\; {\rm N}\end{aligned}[/tex].

[tex]\begin{aligned}\frac{k\, q_{1}\, q_{2}}{r^{2}} &\approx \frac{1}{(0.03\; {\rm m})^{2}} \\ &\quad \times (8.988 \times 10^{-9}\; {\rm N \cdot m^{2} \cdot C^{-2}})\\ &\quad \times ((-2) \, (1.15\times 10^{-9}\; {\rm C}))\, (1.15\times 10^{-9}\; {\rm C})) \\ &\approx 2.641\times 10^{-23}\; {\rm N}\end{aligned}[/tex].

Since the charges are of opposite sign, the [tex](-2\, q)[/tex] charge would attract both of the [tex](+q)[/tex] charges. In particular, the (approximately) [tex]9.509\times 10^{-24}\; {\rm N}[/tex] force would point to the left. The (approximately) [tex]2.641 \times 10^{-23}\; {\rm N}[/tex] force would point to the right.

As a result, the net force on the [tex](-2\, q)[/tex] charge would point to the right. The magnitude of the net force on this charge would be approximately [tex]2.641 \times 10^{-23}\; {\rm N} - 9.509\times 10^{-24}\; {\rm N} \approx 1.69 \times 10^{-23}\; {\rm N}[/tex].

• The net force acting on an object equals the applied force plus the force of friction.

True or False

Answers

Answer:

false

Explanation:

ke sath hi hai j clin oncol biol to u h

During a group project, two students constructed a simple machine to add to their Rube Goldberg project. They were told to create one that demonstrates the concept of force-distance tradeoff. One student created model A and the other students created model B.


image



Using the CER method, which model best demonstrates the force-distance tradeoff and why?

Answers

Answer:

Image B

Explanation:

although I'm not exactly sure, i've recently gotten this question as well. but model B demonstrates the force- distance trade off because you can see how in that image them distance is increased in the force is decreased with the object being shorter. hopefully this helps in some way

A 3 kg mass is travelling in a circle of 0.1 m radius with a speed of 2 m/s. What is the centripetal acceleration?

Answers

a = v² / R = (2 m/s)² / (0.1 m) = 40 m/s²

What are the precautionary measures against earthquake?

Answers

Answer:

Seek shelter under stable tables or under door frames.

If outside, stay away from buildings, bridges and electricity pylons and move to open areas.

Avoid areas at risk from secondary processes, such as landslides, rockfall and soil liquefaction.

From  

Measures against earthquakeswww.planat.ch › earthquake › measures-eb

Indentify the following types of reflection.

Answers

Answer:

first is regular reflection and 2nd is irregular

as an object falls a greater distance, does the speed at which it is falling increase or decrease

Answers

Answer:

Increase

Explanation:

If an object is falling for a greater distance, it will gain momentum and speed up.

Other Questions
Learning the language of money is not that important because you will be able to depend on financial planners to manage your money. True or false?. On a force out at second base the defensive player can ______. A tag the runnerB tag second baseC Neither a nor b D Both a and b I need help please please why the efficiency of heat engine is always less than 100% Using the geologic concept of plate boundaries, compare and contrast the formation of the Andes Mountains,Himalayan Mountains, the islands of Japan, Iceland, and the San Andreas area of California. Compare ( how are they alike) and Compare (how are they different) Find QR: 3x+22=10x-41 why people choose wrong people to date Graph the function and its parent function. Then describe the transformation. f(x) = x + 3 Please Help ASAP A bag is filled with 100 marbles that are all the same size and shape each marble has one color the number of marbles in a colors are listed below 21 green 35 blue 18 red 26 yellow one marble is randomly selected from the bag which word best describes the probability of it being green What is the slope of the line that passes through the points (-9,5) and (-17,5)? Write your answer in simplest form. HELP IM GETTING TIMED. On the Electromagne tic Spectrum, radio waves would have(Astro 14.D)A. The same sizeC. Smallerwavelengths than Gamma RaysB. LargerD. Twice as many Select the best answer for the question. 9. Which of the following statements about proximity is true? O A. A lack of closeness indicates a relationship. OB. Items that are intellectually connected are automatically visually connected. C. The idea of proximity means everything is closer together. O D. Separate elements must be in close proximity. [21+3(9)]/6+9I need help Which of the following describes a boreal forest?A biome occurring at high northern latitudes that is dominated by conifers that can withstand the long, cold wintersA blome in tropical regions where rain falls seasonally and broad-leaved trees dominateA blome dominated by broad-leaved trees that flower and grow in warm seasons, Inen drop their leaves and becomedormant during cold wintersA biome dominated by a multilayered forest that occurs where warm temperatures and continual rains allow plantgrowth year-round Approximately how many years will it take $3000 to double if it is invested in an account that pays 3%compounded monthly? Round your answer to the nearest whole year. The standard normal curve shown below models the population distributionof a random variable What proportion of the values in the population doesnot ie between the two zscores indicated on the diagram?OA 02881OB. 0.3102OC. 03064OD. 0.3175OE 0.2933 how do i tell if my bearded dragon has tail rot? Please help fast,......,,,, What is the slope of the line y = 1/2x - 4? Factor the expression 12-8t