The melting point of three solids X,Y and Z are 298K, 314 K and 398K respictively.Arrange these in increasing order of their inter particle force of attraction

Answer:

Your question is somewhat poorly worded, even so what I can contribute is the statement is false, since the salt is sodium chloride, where its severe chemical formula NaCl, is a SALT not an acid and if it dissolves in water, seriously the solute of a solution, where water plays the role of the solvent

Explanation:

Sodium chloride is a binary salt, very easy to dissolve in water, it is also called the famous table salt, since it can be ingested in food even though it is not so recommended against high blood pressure conditions.

Answer:

C.

Explanation:

pH > 7, basic, so pH = 9  is basic.

When solution is basic, it will turn phenolphthalein pink.

A piece of lithium metal is added to a beaker that contains water and phenolphthalein. Using what you know about the properties of bases, choose the best explanation for what you observe.

Answer:

The phenolphthalein is turning pink because a base is forming.

Answer:

C. The second equation must be halved

D. The second equation must be reversed

E. The third equation must be halved.

Delta Hrxn= 131.3 kJ

Explanation:

The correct answer is -582 KJ.

What is the enthalpy of reaction?

What is the overall enthalpy of the reaction?

Learn more about enthalpy below,

https://brainly.com/question/27207707

#SPJ2

Answer:

Different

Explanation:

Answer: The IUPAC name of [tex]CH_3C\equiv CCH_2CH_2Cl[/tex] is 5-chloro-2-pentyne

Explanation:

1. First select the longest possible carbon chain.  For the number of carbon atom, we add prefix as 'meth' for 1, 'eth' for 2, 'prop' for 3, 'but' for 4, 'pent' for 5, 'hex' for 6, 'sept' for 7, 'oct' for 8, 'nona' for 9 and 'deca' for 10.

2. The longest possible carbon chain should contain all the bonds and functional groups.

3. The numbering is done in such a way that the carbon containing the functional group or substituent gets the lowest number.

4. The naming of alkane is done by adding the suffix -ane, alkene by adding the suffix -ene, alkyne.

Thus the IUPAC name of [tex]CH_3C\equiv CCH_2CH_2Cl[/tex] is 5-chloro-2-pentyne

Answer:

Ribose

Explanation:

This is the pentose sugar found in RNA commonly.

Answer: 211.2 grams

Explanation:

To calculate the number of moles for given molarity, we use the equation:

[tex]\text{Molarity of the solution}=\frac{\text{Moles of solute}}{\text{Volume of solution in L)}}[/tex]     .....(1)

Molarity of [tex]KBr[/tex] solution = 1.7 M

Volume of solution = 3.5 L

Putting values in equation 1, we get:

[tex]1.7M=\frac{\text{Moles of}KBr}{3.5L}\\\\\text{Moles of }KBr=\{1.7mol/L\times 3.5L}=5.95moles[/tex]

The balanced chemical reaction is:

[tex]Cl_2+2KBr\rightarrow 2KCl+Br_2[/tex]

According to stoichiometry:

2 mole of KBr requires = 1 mole of [tex]Cl_2[/tex]

5.95 moles of KBr requires = [tex]\frac{1}{2}\times 5.95=2.975[/tex] moles of [tex]Cl_2[/tex]

Mass of [tex]Cl_2=moles\times {\text {Molar mass}}=2.975mol\times 71g/mol=211.2g[/tex]

Thus 211.2 grams of chlorine gas are needed to react with 3.5 liters of a 1.7 molar potassium bromide solution

Answer:

1) 1.39 grams H2O2

2) 0.933 grams Fe

Explanation:

Step 1: Data given

Volume of oxygen = 0.460 L

STP = 1 atm and 273 K

Step 2: The balanced equation

2H2O2(aq) → 2H2O(l) + O2(g)

Step 3: Calculate the number of moles O2

p*V = n*R*T

⇒with p= the pressure = 1 atm

⇒with V = the volume = 0.460 L

⇒with n = the number of moles = TO BE DETERMINED

⇒with R = the gas constant = 0.08206 L*atm/mol*K

⇒with T = the temperature = 273 K

n = (p*V)/(R*T)

n = (1 * 0.460)/ (0.08206*273)

n = 0.0205 moles moles

Step 4: Calculate moles H2O2

For 2 moles H2O we'll have 2 moles H2O and 1 mol O2

For 0.0205 moles O2 we'll need 2*0.0205 = 0.041 moles H2O2

Step 5: Calculate mass H2O2

Mass H2O2 = moles H2O2 * molar mass H2O2

Mass H2O2 = 0.041 moles * 34.01 g/mol

Mass H2O2 = 1.39 grams

Step 1: Data given

Volume of hydrogen = 0.500 L

STP = 1 atm and 273 K

Step 2: The balanced equation

3Fe(s) + 4H2O(l) → Fe3O4(s) + 4H2(g)

Step 3: Calculate the moles of H2

p**V = n*R*T

⇒with p= the pressure = 1 atm

⇒with V = the volume = 0.500 L

⇒with n = the number of moles = TO BE DETERMINED

⇒with R = the gas constant = 0.08206 L*atm/mol*K

⇒with T = the temperature = 273 K

n = (p*V) / '*T)

n = (1 * 0.500) / (0.08206 * 273)

n = 0.0223 moles

Step 4: Calculate moles Fe

For 3 moles Fe we need 4 moles H2O to produce 1 mol Fe3O4 and 4 moles H2

For 0.0223 moles H2 we'll need 0.0223 *3/4 = 0.0167 moles Fe

Step 5: Calculate mass of Fe

Mass Fe = moles Fe * atomic mass Fe

Mass Fe = 0.0167 moles * 55.845 g/mol

Mass Fe = 0.933 grams Fe

1. The mass of the hydrogen peroxide should be 1.39 grams H2O2.

2) The mass of the iron should be 0.933 grams Fe.

Since

Volume of oxygen = 0.460 L

STP = 1 atm and 273 K

Now The balanced equation

2H2O2(aq) → 2H2O(l) + O2(g)

Now the number of moles O2

p*V = n*R*T

Here p= the pressure = 1 atm

V = the volume = 0.460 L

n = the number of moles = ?

R = the gas constant = 0.08206 L*atm/mol*K

T = the temperature = 273 K

Now

n = (p*V)/(R*T)

n = (1 * 0.460)/ (0.08206*273)

n = 0.0205 moles moles

Now  moles H2O2 should be

For 2 moles H2O we'll have 2 moles H2O and 1 mol O2

So,

For 0.0205 moles O2 we'll need 2*0.0205 = 0.041 moles H2O2

Now mass H2O2

Mass H2O2 = moles H2O2 * molar mass H2O2

Mass H2O2 = 0.041 moles * 34.01 g/mol

Mass H2O2 = 1.39 grams

2. The mass of the iron should be

Since

Volume of hydrogen = 0.500 L

STP = 1 atm and 273 K

Now

The balanced equation

3Fe(s) + 4H2O(l) → Fe3O4(s) + 4H2(g)

Now the moles of H2

p**V = n*R*T

Here

p= the pressure = 1 atm

V = the volume = 0.500 L

n = the number of moles = ?

R = the gas constant = 0.08206 L*atm/mol*K

T = the temperature = 273 K

So,

n = (p*V) / '*T)

n = (1 * 0.500) / (0.08206 * 273)

n = 0.0223 moles

Now Calculate moles Fe

For 3 moles Fe we need 4 moles H2O to produce 1 mol Fe3O4 and 4 moles H2

So,

For 0.0223 moles H2 we'll need 0.0223 *3/4 = 0.0167 moles Fe

Now the mass of Fe

Mass Fe = moles Fe * atomic mass Fe

Mass Fe = 0.0167 moles * 55.845 g/mol

Mass Fe = 0.933 grams Fe

Learn more about mass here: https://brainly.com/question/15837114

Answer:

Minerals

Explanation:

I looked it up on google. Thanks.

Answer:

The Healthcare system should be a welcome place to the different tiers of people in the society. There should be zero form of discriminations and everyone should be should be treated in the same way. Defaulters should be frowned at and adequate punishments should be meted out. There should be strict accountability of the funds made available to the healthcare centers to prevent diversion and any corrupt practices. These systems need to be in place to ensure fairness in healthcare.

Answer: H2 + MgCl2

Explanation: As they are on the right side of the equation/ are the products being made as a result of the reaction, they are the products.

Answer:

Oil prices would decrease, and availability would increase

Explanation:

explanation

the chemical formula of water is H²O.

Hydrogen+Oxygen=water

answer

Hydrogen-Water-Hydrogen

Answer:

1.2M

Explanation:

Initial Volume 0.05L

Final Volume 0.250L

HCl Molar mass: 36.46 g/mol

M = 6M HCl

Molarity = mol solute /  L of solution

Inital M = Molarity = 6

mol solute = X = unknown

L of Solution = 0.05L

6 = X / 0.05

X = 0.3

X = 0.3/0.25

X = 1.2 M

​  

Answer:

sodium, silicon, and argon

Explanation:

castle learning

Answer:

Na2CO3

Explanation:

Na2CO3 is a compound soluble in water. So the correct option is A.

The common ionic solids' solubility laws are as follows. When two rules seem to conflict with one another, the prior rule is used.

Therefore, the correct option is A

Read more about solubility, here

https://brainly.com/question/8591226

#SPJ2

Answer:

In the picture.

I hope it helps

Explanation:

Nitrogen cycle is a complex process (or sequence of reaction) by which nitrogen is removed and added to the soil.

Answer:

c

Explanation:

Soil, Plants get energy from the sun.. Answer is C.

Answer:

B. trees

Explanation:

A biotic factor is something in an environment or ecosystem that is living. For example, plants and animals are biotic factors. An abiotic factor is just the opposite-they are not living. Rocks and water are examples of abiotic factors.

Soil composition, temperature and sunlight are all not alive. Therefore, they must be abiotic factors.

Trees are living organism. This means that they are biotic factors. So, the correct answer is B: trees.

The question is incomplete, the complete question is;

The oxide of element X is reduced by heating with carbon.

Element X does not react with cold water, steam or dilute hydrochloric acid.

What is X?

A copper

B iron

C magnesium

D zinc

Answer:

Copper

Explanation:

Copper is below hydrogen in the activity series of metals. Remember that the activity series of metals is an arrangement of metals in order of decreasing reactivity from most reactive to least reactive. The metals at the head of the series are highly reactive, metals at the middle of the series are moderately reactive while metals below hydrogen in the series are least reactive.

Copper being below hydrogen in the series cannot displace it from water (cold or steam) or from dilute acid solutions. Copper can be reduced by heating it with carbon (thermal reduction).

Answer:

What is the atomic number of neon?

10

What is the atomic mass of neon? Give your answer to the nearest tenth.

20.2

The periodic table is a representation of the periodic elements based on atomic numbers. The atomic number of neon is 10, and the atomic mass is 20.2 amu.

Neon is categorized as a stable gas that belongs to the noble gas group. It has been represented as Ne and is a monoatomic gas with no odor or color. It has an atomic number of 10 and an electronic configuration as, [He] 2s²2p⁶.

The atomic mass of neon elements is 20.2 amu and is said to have full electrons per shell. They do not need to donate or accept any electron as they have a balanced orbital. They have the property of fluorescence and are used in electric signs and lamps.

Therefore, neon is placed in group 18 and has atomic number 10 and a mass of 20.2 amu.

Learn more about neon, here:

https://brainly.com/question/8226528

#SPJ6

Answer:

Acid is a compound which dissolves in water to produce hydrogen ions (H+) and described as proton donors.

Answer:

Tests for unsaturation involves addition across the multiple bonds in the unsaturated compound.

Explanation:

In organic chemistry, we define an unsaturated compound as any compound that contains a double or triple bond. These multiple bonds are also known as pi bonds.

There are two major tests for unsaturation which shall both be discussed here.

The first test for unsaturation is by the use of bromine water. The unknown sample is passed through a solution of bromine water which normally appears reddish brown. The bromine water becomes decolorized due to addition of bromine across the multiple bond. This is a standard test for unsaturation.

Secondly, unsaturated compounds decoulourize a solution of potassium permanganate when passed through it. This alone can not be used as a distinctive test for unsaturation.

Propenoic acid will give a positive test to the both reagents showing that it contains multiple bonds, in this particular instance, a double bond.

Answer:

0.077M is the concentration of the hydroxyl ion

Explanation:

Dilution factor is the ratio between the aliquot that is taken of a solution and the total volume of the diluted solution.

For the problem, dilution factor is:

7.53cm³ / 147cm³ = 0.05122

To obtain molarity of a diluted solution you must multiply dilution factor and initial molarity of the solution, thus:

1.5 M × 0.05122 = 0.077M is the concentration of the hydroxyl ion

The given question is incomplete. The complete question is as follows.

Pure potassiom hydrogen phthalate is used for standardization of the sodium hydroxide solution. Suppose that the potassium hydrogen phthalate is not completely dry. Will the reported molar concentration of the sodium hydroxide solution be too high, too low, or unaffected because of the moistness of the potassium hydrogen phthalate? Explain please.

Explanation:

When potassium hydrogen phthalate is not completely dry then it means there will be some water present in it. According to this, actual potassium hydrogen phthalate is diluted because of the presence of water molecules.

Hence, 1 mole of potassium hydrogen phthalate needs 1 mole of NaOH. And, at the equivalence point according to the concept of moles:

No. of moles of potassium hydrogen phthalate = No. of moles of NaOH

Also, the titration of potassium hydrogen phthalate concentration is less because of the presence of water then the number of moles of NaOH calculated will be less.

Thus, we can conclude that the molar concentration of the sodium hydroxide solution be too low.

Answer:

0.0008127

Explanation:

This is easy

Answer:

Did you mean solution??

In chemistry, a solution is considered as a special type of homogeneous mixture composed of two or more substances. In such a mixture, a solute is a substance dissolved in another substance, known as a solvent.

Eg: sweet tea or coffee (sugar added to solution)

     bleach (sodium hypochlorite dissolved in water)

HOPE IT HELPS :)

Answer:

a)0.765 g

b)7.613 g

c)0.20 L

Explanation:

Consider the reaction involved;

Na(s) + HNO3(aq) ----> NaNO3(s) + H2(g)

Note that, if a hot, saturated aqueous solution of sodium nitrate was allowed to cool, solid sodium nitrate would crystallise out of the solution and this would also be classed as a precipitate. This is the case here.

Number of moles of sodium reacted= mass of sodium reacted/ molar mass of sodium

Number of moles of sodium= 7.85g/23gmol-1

Number of moles of sodium= 0.34 moles of sodium

Number of moles of acid reacted= concentration of acid × volume of acid

Number of moles of acid= 0.0450 × 200/1000

Number of moles of acid= 9×10^-3 moles

Therefore, HNO3 is the limiting reactant.

1 mole of HNO3 yield 1 mole of NaNO3

9×10^-3 moles of HNO3 yield 9×10^-3 moles of NaNO3

Hence mass of NaNO3= number of moles × molar mass

Mass of NaNO3= 9.0×10^-3 moles × 84.9947 g/mol

Mass of NaNO3= 0.765 g of NaNO3

b)

Since

1 mole of sodium metal reacts with 1 mole of HNO3

9×10^-3 moles of sodium reacts with 9×10^-3 moles of HNO3

Therefore amount of unreacted sodium metal = 0.34 moles - 9×10^-3 moles = 0.331 moles

Mass of unreacted sodium metal = 0.331 moles × 23 gmol-1= 7.613 g

c)

If 1 mole of HNO3 yields 1 mole of hydrogen gas

9×10^-3 moles of HNO3 yields 9×10^-3 moles of hydrogen gas.

1 mole of hydrogen gas occupies 22.4 L

9×10^-3 moles of hydrogen gas will occupy 9×10^-3 moles × 22.4/1 = 0.20 L

Answer:

The molar concentration of the final solution is 1.71 [tex]\frac{moles}{liter}[/tex]

Explanation:

Molarity is a way of expressing the concentration of solutions and indicates the number of moles of solute dissolved per liter of solution.

The molarity of a solution is calculated by dividing the moles of the solute by the volume of the solution.:

[tex]Molarity (M)=\frac{number of moles of solute}{volume}[/tex]

Molarity is expressed in units ([tex]\frac{moles}{liter}[/tex]).

Then, the number of moles of solute can be calculated as:

number of moles of solute= molarity* volume

So, in this case, the final concentration can be calculated as:

[tex]Final molarity (M)=\frac{Total number of moles of solute}{Total volume}[/tex]

where, being 65 mL=0.065 L, 125 mL=0.125 L and 190 mL=0.190 L (because 1000 mL= 1 L):

Replacing:

[tex]Final molarity (M)=\frac{0.324595 moles}{0.190 L}[/tex]

Final molarity ≅ 1.71 [tex]\frac{moles}{liter}[/tex]

The molar concentration of the final solution is 1.71 [tex]\frac{moles}{liter}[/tex]

Answer:

THE NEW PRESSURE OF THE GAS AT 50 °C IS 2.41 atm.

Explanation:

Initial temperature = 35 °C = 35 + 273 K= 308 K

Final temperature = 50 °C =50 + 273 K = 323 K

Initial pressure = 2.3 atm

Final pressure = unknown

Using the combined gas equation to get the relationship between pressure and temperature for a given gas sample, we have;

P1 / T1 = P2 / T2

P2 = P1 T2 / T1

P2 = 2.3 * 323 / 308

P2 = 742.9 /308

P2 = 2.41 atm.

THE NEW PRESSURE IS 2.41 atm at 50 °C