Answer:
29.16 J
Explanation:
From Hook's law,
W = 1/2(ke²)..................... Equation 1
Where W = work done, k = Spring constant, e = extension.
Given: W = 9 J, e = 0.5 m.
Substitute into equation 1
9 = 1/2(k×0.5²)
Solve for k
k = 18/0.5²
k = 72 N/m.
The work done required to stretch the spring by additional 0.4 m is
W = 1/2(72)(0.4+0.5)²
W = 36(0.9²)
W = 29.16 J.
Find another example of separation that is used to extract a material made useful by humans. Describe the process of separation and what we use the separated component for. (4-6 sentences)
If anyone would answer this I’ll answer ur questions for return!
Please and thank you!
Answer:
Salt
Explanation:
Salt plays a crucial role in maintaining human health. It is the main source of sodium and chloride ions in the human diet. Sodium is essential for the nerve and muscle function and is involved in the regulation of fluids in the body. Sodium also plays a role in the body's control of blood pressure and volume. Salt is harvested by seawater or brine is fed into large ponds of water and is drawn out through natural evaporation which allows the salt to be subsequently harvested.
Have a good day and stay safe!
If you were to drop a rock from a tall building, assuming that it had not yet hit the ground, and neglecting air resistance. What is its vertical displacement (in m) after 4 s? (g = 10 m/s2)
Answer:
d = 80 m
its vertical displacement (in m) after 4 s is 80 m
Explanation:
From the equation of motion;
d = vt + 0.5at^2 ......1
Where;
d = displacement
v = initial velocity = 0 (dropped with no initial speed)
t = time of flight = 4s
a = g = acceleration due to gravity = 10 m/s^2
Substituting the given values into equation 1;
d = 0(4) + 0.5(10 × 4^2)
d = 0.5(10×16)
d = 80 m
its vertical displacement (in m) after 4 s is 80 m
4. A neutrally charged conductor has a negatively charged rod brought close to it, and thus has an induced positive charge on the surface closest to the rod. What can we say about the overall charge on the conductor
Answer:
Overall charge still remains zero on conductor until touched by charged rod.
Explanation:
Here, we want to know what has happened to the overall charge on the conductor.
Since the conductor is neutral, the overall charge on the conductor must remain zero because positive charge is induced on close end to rod then equal and negaitve charge is induced on far end to rod.
Thus, overall charge still remains zero on conductor until touched by charged rod.
Friction is a force that acts in an ___________ direction of movement.
a) similar
b) opposite
c) parallel
d) west
Answer:
the answer is opposite.
plz mark brainliest
Explanation:
A ball rolls over the edge of a platform with only a horizontal velocity. The height of the platform is 1.60m and the horizontal range of the ball from the base of the platform is 20.0m. What is the velocity of the ball just before it touches the ground
Answer:
v = 46.99 m/s
Explanation:
The velocity of the ball just before it touches the ground, is given by the following formula:
[tex]v=\sqrt{v_x^2+v_y^2}[/tex] (1)
vx: horizontal component of the velocity
vy: vertical component of the velocity
The vertical component vy is calculated by using the following formula:
[tex]v_y^2=v_{oy}^2+2gh[/tex] (2)
vy: final velocity
voy: initial vertilal velocity = 0m/s (because it is a semi parabolic motion)
g: gravitational acceleration = 9.8 m/s^2
h: height = 1.60m
You replace the values of the parameters in the equation (2):
[tex]v_y=2(9.8m/s^2)(1.60m)=31.36\frac{m}{s}[/tex]
vx is calculated by using the information about the horizontal range of the ball:
[tex]R=v_o\sqrt{\frac{2h}{g}}[/tex] (3)
R: horizontal range of the ball = 20.0 m
You solve the previous equation for vo, the initial horizontal velocity:
[tex]v_o=R\sqrt{\frac{g}{2h}}=(20.0m)\sqrt{\frac{9.8m/s^2}{2(1.60m)}}\\\\v_o=35\frac{m}{s}[/tex]
The horizontal component of the velocity is constant in the complete trajectory, hence, you have that
vx = vo = 35 m/s
Finally, you replace the values of vx and vy in the equation (1):
[tex]v=\sqrt{(35m/s)^2+(31.36m/s)^2}=46.99\frac{m}{s}[/tex]
The velocity of the ball just before it touches the ground is 46.99 m/s
Suppose that 7.4 moles of a monatomic ideal gas (atomic mass = 1.39 × 10-26 kg) are heated from 300 K to 500 K at a constant volume of 0.74 m3. It may help you to recall that CV = 12.47 J/K/mole and CP = 20.79 J/K/mole for a monatomic ideal gas, and that the number of gas molecules is equal to Avagadros number (6.022 × 1023) times the number of moles of the gas.
1) How much energy is transferred by heating during this process?2) How much work is done by the gas during this process?3) What is the pressure of the gas once the final temperature has been reached?4) What is the average speed of a gas molecule after the final temperature has been reached?5) The same gas is now returned to its original temperature using a process that maintains a constant pressure. How much energy is transferred by heating during the constant-pressure process?6) How much work was done on or by the gas during the constant-pressure process?
Answer:
Explanation:
1 ) Since it is a isochoric process , heat energy passed into gas
= n Cv dT , n is no of moles of gas , Cv is specific heat at constant volume and dT is rise in temperature .
= 7.4 x 12.47 x ( 500 - 300 )
= 18455.6 J.
2 ) Since there is no change in volume , work done by the gas is constant.
3 ) from , gas law equation
PV = nRT
P = nRT / V
= 7.4 x 8.3 x 500 / .74
= .415 x 10⁵ Pa.
4 ) Average kinetic energy of gas molecules after attainment of final temperature
= 3/2 x R/ N x T
= 1.5 x 1.38 x 10⁻²³ x 500
= 1.035 x 10⁻²⁰ J
1/2 m v² = 1.035 x 10⁻²⁰
v² = 2 x 1.035 x 10⁻²⁰ / 1.39 x 10⁻²⁶
= 1.49 x 10⁶
v = 1.22 x 10³ m /s
5 ) In this process , pressure remains constant
gas is cooled from 500 to 300 K
heat will be withdrawn .
heat withdrawn
= n Cp dT
= 7.4 x 20.79 x 200
= 30769.2 J .
6 )
gas will have reduced volume due to cooling
reduced volume = .74 x 300 / 500
= .444 m³
change in volume
= .74 - .444
= .296 m³
work done on the gas
= P x dV
pressure x change in volume
= .415 x 10⁵ x .296
= 12284 J.
Your new toaster has two separate toasting units, each of which consumes 600 watts of power when it is in use. When you operate one unit, a current of 5 amperes flowsthrough the wiring in your home and the wires waste about 1 watt of power handling that current. If you operate both toasting units at once, your toaster consumes 1200 watts and the current flowing through the wiring in your home doubles to 10 amperes. How much power will the wires in your home waste now
Answer:
1.92 Watt lost
Explanation:
Power rating of each toaster = 600 Watts
Current that flows = 5 Amperes
Wasted power = 1 Watt
Voltage of toaster can be gotten from P = [tex]I^{2}[/tex]R
where I = current
and R = Resistance
600 = [tex]5^{2}[/tex] x R
R = 600/25 = 24 Ohms.
According to joules loss due to heating of wire
Power loss P ∝ [tex]I^{2}[/tex]R
imputing values,
1 ∝ [tex]5^{2}[/tex] x 24
1 ∝ 600
to remove the proportionality sign, we introduce a constant k
1 = 600k
k = 1/600 = 0.00167
For the case where the current is doubled to 10 ampere, as the power doubles to 1200 W.
The resistance across the wire becomes
1200 = [tex]10^{2}[/tex]R
R = 1200/100 = 12 Ohms
power loss P = k x [tex]I^{2}[/tex]R
P = 0.0016 x [tex]10^{2}[/tex] x 12
P = 1.92 Watt lost
This question involves the concepts of power, current, and resistance.
The power wasted by the wires in the home for two units will be "4 watt".
POWER WASTAGEThe power wasted by the wires can be given in terms of current and resistance by the following formula:
[tex]P=I^2R\\\\\frac{P}{I^2}=R=Constant\\\\\frac{P_1}{I_1^2}=\frac{P_2}{I_2^2}[/tex]
where,
P₁ = Power wasted for one unit = 1 wattI₁ = current through wires for one unit = 5 AR = Resistance of wires = constantP₂ = Power wasted for two units = ?I₂ = Current through wires for two units = 10 ATherefore,
[tex]\frac{1\ watt}{(5\ A)^2}=\frac{P_2}{(10\ A)^2}\\\\P_2=\frac{(1\ watt)(100\ A^2)}{25\ A^2}[/tex]
P₂ = 4 watt
Learn more about power here:
https://brainly.com/question/7963770
How can socialism
impact populations?
Answer:
it represents a fundamental difference. (more info below)
Explanation:
Production is incessantly developing and expanding in socialist countries, and employment is guaranteed for the entire productive population. Consequently, the relative overpopulation problem has been eliminated. This represents the fundamental difference between socialism's demographic law and capitalism's law.
hope this helped!
Some runners train with parachutes that trail behind them to provide a large drag force. These parachutes are designed to have a large drag coefficient. One model expands to a square 1.8 m on a side, with a drag coefficient of 1.4. A runner completes a 200 m run at 5.0 m/s with this chute trailing behind. Part A How much thermal energy is added to the air by the drag force
Answer:
13.9 kJ
Explanation:
Given that
Length of the side, l = 1.8 m
Drag coefficient, C(d) = 1.4
Distance of run, d = 200 m
Velocity of run, v = 5 m/s
Density, ρ = 1.23
Using the Aerodynamics Drag Force formula. We have
F(d) = 1/2.ρ.A.C(d).v²
The Area, A needed is 1.8 * 1.8 = 3.24 m². So that,
F(d) = 1/2 * 1.23 * 3.24 * 1.4 * 5²
F(d) = 139.482/2
F(d) = 69.74
recall that, energy =
W = F * d
W = 69.74 * 200
W= 13948
W = 13.9kJ
Therefore, the thermal energy added to the air by the drag force is 13.9kJ
Which of these boxes will not accelerate!
30 Newtons
40 Newtons
50 kg
15 Newton
B.
10 kg
30 Newtons
C.
30 Newtons
80 kg
20 Newtons
20 Newtons
20 Newtons
D.
75 kg
Answer:
(possibly) Box D
Explanation:
The one that has balanced forces will not accelerate. The forces are unbalanced in figures A, B, C. We cannot tell about figure D, because the downward force is not shown. If that force is 20 N, box D will not accelerate.
Assuming 100% efficient energy conversion, how much water stored behind a 50
centimeter high hydroelectric dam would be required to charge the battery?
Answer:
Explanation:
The power rating of the battery isn't provided. But let us assume that it is one of the common batteries with ratings of 12 V and 50 A.h
Potential energy possessed by water at that height = mgh
m = mass of the water = ρV
ρ = density of water = 1000 kg/m³
V = volume of water = ?
g = acceleration due to gravity = 9.8 m/s²
h = height of water = 50 cm = 0.5 m
Potential energy = ρVgh = 1000 × V × 9.8 × 0.5 = (4900V) J
Energy of the battery = qV
q = 50 A.h = 50 × 3600 = 180,000 C
V = 12 V
qV = 180,000 × 12 = 2,160,000 J
Energy = 2,160,000 J
At a 100% conversion rate, the energy of the water totally powers the battery
(4900V) = (2,160,000)
4900V = 2,160,000
V = (2,160,000/4900)
V = 440.82 m³
Hence, with our assumed power ratings for the battery (12 V and 50 A.h), 440.82 m³ of water at the given height of 50 cm would power the battery.
Incase the power ratings of the battery in the complete question is different, this solution provides you with how to obtain the correct answer, given any battery power rating.
Hope this Helps!!!
Which formation is one feature of karst topography?
Sinkholes formation is one feature of karst topography. The top of a cave falls if it develops large enough and its top extends near enough to the surface.
What is karst topography?Karst topography is a type of natural environment formed mostly by chemical weathering by water, resulting in caves, sinkholes, cliffs, and steep-sided hills known as towers.
The top of a cave falls if it develops large enough and its top extends near enough to the surface. Sinkholes are formed as a result of this, and they are one of the most distinguishing aspects of karst terrain.
When water absorbs carbon dioxide from the atmosphere and ground, it becomes carbonic acid.
Hence, sinkholes formation is one feature of karst topography
To learn more about the karst topography, refer to the link;
https://brainly.com/question/1167881
#SPJ2
Answer: A) Caves
Explanation:
Q) A particle in simple harmonic motion starts its motion from its mean position. If T be the time period, calculate the ratio of kinetic energy and potential energy of the particle at the instant when t = T/12.
t\12 and the parties are spreading ever
Explanation:
my point is that you can get sick if
you sont wash your ha
nds or be
save
When a fuel is burned in a cylinder fitted with a piston, the volume expands from an initial value of 0.250 L against an external pressure of 2.00 atm. The expansion does 288 J of work on the surroundings. What is the final volume of the cylinder
Answer:
Vf = 0.0017 m³ = 1.7 L
Explanation:
The work done by the system on the surrounding at constant pressure is given by the following formula:
W = PΔV
W = P(Vf - Vi)
where,
W = Work done = 288 J
P = Constant Pressure = (2 atm)(101325 Pa/atm) = 202650 Pa
Vf = Final Volume f Cylinder = ?
Vi = Initial Volume of Cylinder = (0.25 L)(0.001 m³/ 1 L) = 0.00025 m³
Therefore,
288 J = (202650 Pa)(Vf - 0.00025 m³)
Vf = 288 J/202650 Pa + 0.00025 m³
Vf = 0.0017 m³ = 1.7 L
Representar con una escala de 1cm = 10N dos fuerzas que tengan igual dirección, distinto sentido y sus intensidades son de 40n y 60n, respectivamente.
Alguien que me lo hagaaaaaaa
Answer:
To solve this problem we just need to graph two forces with same direction, pointing to different sides with intensities of 40 N and 60 N.
The image attached shows these forces.
Notice that the vectors are parallel, that's because they have the same direction, but they point to different sides, and their magnitudes have a difference of 20 N.
A subatomic particle X spontaneously decays into two particles, A and B, each of rest energy 1.40 × 10^2 MeV. The particles fly off in opposite directions, each with speed 0.827c relative to an inertial reference frame S. What is the total energy of particle A?
Answer:
E = 389 MeV
Explanation:
The total energy of particle A, will be equal to the sum of rest mass energy and relative energy of particle A. Therefore,
Total Energy of A = E = Rest Mass Energy + Relative Energy
Using Einstein's Equation: E = mc²
E = m₀c² + mc²
From Einstein's Special Theory of Relativity, we know that:
m = m₀/[√(1-v²/c²)]
Therefore,
E = m₀c² + m₀c²/[√(1-v²/c²)]
E = m₀c²[1 + 1/√(1-v²/c²)]
where,
m₀c² = rest mass energy = 140 MeV
v = relative speed = 0.827 c
Therefore,
E = (140 MeV)[1 + 1/√(1 - (0.827c)²/c²)]
E = (140 MeV)(2.78)
E = 389 MeV
Our Sun shines bright with a luminosity of 3.828 x 1025 Watt. Her energies
responsible for many processes and the habitable temperatures on the earth that
make our life possible.
a) Calculate the amount of energy arriving on the Earth in a single day
b) To how many litres of heating oil (energy density 37.3 x 10^6 J/litre is the equivalent?
C) The Earth reflects 30% of this energy : Determine the temperature on Earth's sufact
d) what other factors should be considered to get an even more precisa temperature postiache
Note: The Earth's radius is 6370km; the Sun's sadius is 696 ×10^3km, I AU is 1.495 × 10^8km)
Answer:
a) E = 1.58 10²¹ J , b) Oil = 4,236 107 liter , e) T = 54.3 C
Explanation:
a) To calculate the energy that reaches Earth, let us combine that the power emitted by the Sun is distributed uniformly on a spherical surface
I = P / A
A = 4π r²
in this case the radius of the sphere is the distance from the Sun to Earth r = 1.5 10¹¹ m
I = P / A
I = P / 4π r²
let's calculate
I = 3,828 10²⁵/4 pi (1.5 10¹¹)²
I = 1.3539 10²W / m² = 135.4 W / m2
the energy that reaches the disk of the Earth is
E = I A
the area of a disc
A = π r²
E = I π r²
where r is the radius of the Earth 6.37 10⁶ m
E = 135.4 π(6.37 10⁶)
E = 1,726 10¹⁶ W
This is the energy per unit of time that reaches Earth
t = 1 dai (24h / 1day) (3600s / 1h) = 86400 s
E = 1,826 10¹⁶ 86400
E = 1.58 10²¹ J
b) for this part we can use a direct proportions rule
Oil = 1.58 10²¹ (1 / 37.3 10⁶)
Oil = 4,236 10⁷ liter
c) to silence the surface temperature of the Earth we use the Stefan-Bolztman Law
P = σ A e T⁴
T = [tex]\sqrt[4]{P/Ae}[/tex]
nos indicate the refect, therefore the amount of absorbencies
P_absorbed = 0.7 P
let's calculate
T = REA (0.7 1.58 1021 / [pi (6.37 106) 2 1)
T = RER (8,676 106)
T = 54.3 C
b) Among the other factors that must be taken into account is the greenhouse effect, due to the absorption of gases from the atmosphere
A student has derived the following nondimensionally homogeneous equation: a=x/t2-vt+F/m where v is a velocity's magnitude , a is an acceleration's magnitude, t is a time, m is a mass, F is a force's magnitude , and x is a distance (or length). Which terms are dimensionally homogeneous? .
a) x/t
b) vt
c) a
d) F/m
Answer:
Letter C) and D) is the correct answer.
Explanation:
We know that the a is an acceleration's magnitude, so the units of a are m/s².
Now, let's analyze each terms. If we want that each term will be dimensionally homogeneous, all of them must have the same units of a.
[tex][\frac{x}{t}]=[\frac{m}{s}][/tex]
[tex][vt]=[m][/tex]
[tex][\frac{F}{m}]=[\frac{N}{kg}]=[kg\frac{m}{s^{2}kg}]=[\frac{m}{s^{2}}][/tex]
Therefore, the term F/m is the correct answer.
I hope it helps you!
We can see that a and F/M are dimensionally homogeneous.
In solving dimensions, we try to express a quantity in terms of the fundamental quantities;
MassLengthTimeFor the term a, its dimension is LT^-2
For the term F/m, its dimension is LT^-2
Hence, it follows that a and F/M are dimensionally homogeneous.
Learn more about dimensions: https://brainly.com/question/944206
A pendulum on a planet, where gravitational acceleration is unknown, oscillates with a time period 5 sec. If the mass is increased six times, what is the time period of the pendulum?
Explanation:
We have, a pendulum on a planet, oscillates with a time period 5 sec. The formula used to find the time period is given by :
[tex]T=2\pi \sqrt{\dfrac{l}{g}}[/tex]
l is length of the pendulum
g is acceleration due to gravity on which it is placed
It is clear that, the time period of pendulum is independent of the mass. Hence, if the mass is increased six times, its time period remains the same.
0.92 kg of R-134a fills a 0.14-m^3 weighted piston–cylinder device at a temperature of –26.4°C. The container is now heated until the temperature is 100°C. Determine the final volume of R-134a.
Answer:
The final volume of R-134a is 0.212m³Explanation:
Using one of the general gas equation to find the final volume of the R-134a.
According to pressure law; The volume of a given mas of gas is directly proportional to its temperature provided that the pressure remains constant.
VαT
V = kT
k = V/T
V1/T1 = V2/T2 = k
Given V1 = 0.14-m³ at T1 = –26.4°C = –26.4° + 273 = 246.6K
V2 = ? at T = 100°C = 100+273 = 373K
On substituting this values for T2;
0.14/246.6 = V2/373
373*0.14 = 246.6V2
V2 = 373*0.14 /246.6
V2 = 0.212m³
The final volume of R-134a is 0.212m³
A jet plane is flying at a constant altitude. At time t1=0t 1=0, it has components of velocity vx=90m/s,vy=110m/sv x = 90m/s,v y=110m/s. At time t2=30.0st 2=30.0s, the components are vx=−170m/s,vy=40m/sv x =−170m/s,v y=40m/s.
(a) Sketch the velocity vectors at t1and t2.
How do these two vectors differ? For this time interval calculate
(b) the components of the average acceleration, and
(c) the magnitude and direction of the average acceleration.
The average acceleration [tex]\vec a_{\rm ave}[/tex] over some time interval [tex][t_1,t_2][/tex] is equal to the ratio of the change in velocity [tex]\vec v_2-\vec v_1[/tex] over the duration of the interval [tex]t_2-t_1[/tex], or
[tex]\vec a_{\rm ave}=\dfrac{\Delta\vec v}{\Delta t}=\dfrac{\vec v_2-\vec v_1}{t_2-t_1}[/tex]
which can be split into the [tex]x[/tex] and [tex]y[/tex] components as
[tex]a_{\rm{ave},x}=\dfrac{v_{2,x}-v_{1,x}}{t_2-t_1}=\dfrac{-170\frac{\rm m}{\rm s}-90\frac{\rm m}{\rm s}}{30.0\,\mathrm s-0}\approx-8.67\dfrac{\rm m}{\mathrm s^2}[/tex]
[tex]a_{\rm{ave},y}=\dfrac{v_{2,y}-v_{1,y}}{t_2-t_1}=\dfrac{40\frac{\rm m}{\rm s}-110\frac{\rm m}{\rm s}}{30.0\,\mathrm s-0}\approx-2.33\dfrac{\rm m}{\mathrm s^2}[/tex]
The magnitude of this average acceleration is
[tex]\left\|\vec a_{\rm ave}\right\|=\sqrt{{a_{\rm{ave},x}}^2+{a_{\rm{ave},y}}^2}\approx8.98\dfrac{\rm m}{\mathrm s^2}[/tex]
and its direction is [tex]\theta[/tex] such that
[tex]\tan\theta=\dfrac{a_{\rm{ave},y}}{a_{\rm{ave},x}}\implies\theta\approx-164.9^\circ[/tex]
which corresponds to a direction of about 15.1º South of West.
A ball thrown horizontally from the top of a building hits the ground in 0.600 s. If it had been thrown with twice the speed in the same direction, it would have hit the ground in:________.
a. 4.0 s.
b. 1.0 s.
c. 0.50 s.
d. 0.25 s.
e. 0.125 s.
Answer:
none of the answers is correct, the time is the same t₁ = t₂ = 0.600 s
Explanation:
This is a kinematics exercise, analyze the situation a bit. The vertical speed in both cases is the same is zero, the horizontal speed in the second case is double (vₓ₂ = 2 vₓ₁)
let's find the time to hit the ground
y = y₀ + I go t - ½ g t²
0 = y₀ - ½ g t²
t = √ 2y₀ / g
with the data from the first launch
y₀i = ½ g t²
y₀ = ½ 9.8 0.6²
y₀ = 1,764 m
with this is the same height the time to descend in the second case is the same
t₂ = 0.600 s
this is because the horizontal velocity change changes the offset on the x axis, but does not affect the offset on the y axis
Therefore, none of the answers is correct, the time is the same
t₁ = t₂ = 0.600 s
A large box containing your new computer sits on the bed of your pickup truck. You are stopped at a red light. When the light turns green, you stomp on the gas and the truck accelerates. To your horror, the box starts to slide toward the back of the truck. Draw clearly labeled free-body diagrams for the truck and for the box. Indicate pairs of forces, if any, that are third-law action–reaction pairs. (The horizontal truck bed is not frictionless.)
Answer:
The description of that same situation has been listed throughout the explanation segment below.
Explanation:
When another huge box or container containing your new machine or device sits on someone's pick-up truck's bed, the third low portion of the operation response force. This same friction force of the box mostly on the truck bed as well as the friction force including its truck bed on either the box from either the immune response pair.So that the above seems to be the right answer.
A parallel-plate capacitor has square plates that are 7.20 cm on each side and 3.40 mm apart. The space between the plates is completely filled with two square slabs of dielectric, each 7.20 cm on a side and 1.70 mm thick. One slab is Pyrex glass and the other slab is polystyrene. If the potential difference between the plates is 96.0 V, find how much electrical energy (in nJ) can be stored in this capacitor.
Answer:
U = 218 nJ
Explanation:
We are given;
Spacing between the plates; d = 3.4 mm = 3.4 × 10^(-3) m
Voltage across the capacitor; V = 96 V
Dimension of the square plates is 7.2cm x 7.2cm.
So, Area = 7.2 × 7.2 = 51.84 cm² = 51.84 × 10^(-4) m²
Permittivity of free space; ε_o = 8.85 × 10^(-12) C²/N.m²
From relative permeability table;
Dielectric constant of Pyrex; k1 = 5.6
Dielectric constant of polystyrene; k2 = 2.56
Now, formula for capacitance of a capacitor with Dielectric is;
C = kC_o
Where, C_o = ε_o(A/d)
Since there are 2 capacitors, d will now be d/2 = (3.4 × 10^(-3))/2 m = 1.7 × 10^(-3)
Since we have 2 capacitor, thus ;
C1 = k1*ε_o*(A/d)
C1 = (5.6 × 8.85 × 10^(-12) × (51.84 × 10^(-4))/(1.7 × 10^(-3))
C1 = 1.51 × 10^(-10) F
Similarly;
C2 = (2.56 × 8.85 × 10^(-12) × (51.84 × 10^(-4))/(1.7 × 10^(-3))
C2 = 0.691 × 10^(-10) F
For capacitors in series, formula for total capacitance(Cs) is;
1/Cs = (1/C1) + (1/C2)
Simplifying this, we have;
Cs = (C1*C2)/(C1 + C2)
Plugging in the relevant values ;
Cs = (1.51 × 10^(-10)*0.691 × 10^(-10))/((1.51 × 10^(-10)) + (0.691 × 10^(-10)))
Cs = 0.474 × 10^(-10) F
The formula for energy stored in a capacitor with 2 Dielectrics is given as;
U = ½Cs*V²
So,
U = ½ × 0.474 × 10^(-10) × 96²
U = 2.18 × 10^(-7) J = 218 × 10^(-9) = 218 nJ
The mass of a particular eagle is twice that of a hunted pigeon. Suppose the pigeon is flying north at ,2=17.1 m/s when the eagle swoops down, grabs the pigeon, and flies off. At the instant right before the attack, the eagle is flying toward the pigeon at an angle =52.7 ° below the horizontal and a speed of ,1=41.5 m/s.
Answer:
31.4 m/s
44.4°
Explanation:
Momentum is conserved in the horizontal direction:
pₓᵢ = pₓ
m vᵢ₂ + 2m vᵢ₁ cos θ = (m + 2m) vₓ
vᵢ₂ + 2 vᵢ₁ cos θ = 3 vₓ
17.1 m/s + 2 (41.5 m/s) (cos -52.7°) = 3 vₓ
vₓ = 22.5 m/s
Momentum is conserved in the vertical direction:
pᵧᵢ = pᵧ
2m vᵢ₁ sin θ = (m + 2m) vᵧ
2 vᵢ₁ sin θ = 3 vᵧ
2 (41.5 m/s) (sin -52.7°) = 3 vᵧ
vᵧ = -22.0 m/s
The speed is:
v = √(vₓ² + vᵧ²)
v = √((22.5 m/s)² + (-22.0 m/s)²)
v = 31.4 m/s
The direction is:
θ = atan(vᵧ / vₓ)
θ = atan(-22.0 m/s / 22.5 m/s)
θ = -44.4°
The speed of the eagle at that instant is 31.4 m/s while it moves off in the direction of 44.4°.
Since momentum is conserved horizontally;
17.1 m/s + 2 (41.5 m/s) (cos -52.7°) = 3 vx
vx = 17.1 m/s + 2 (41.5 m/s) (cos -52.7°)/3
vx = 22.5 m/s
Also, momentum is conserved vertically hence;
2 (41.5 m/s) (sin -52.7°) = 3 vy
vy = 2 (41.5 m/s) (sin -52.7°) /3
vy = -22.0 m/s
The effective speed therefore, is;
v = √((22.5 m/s)² + (-22.0 m/s)²)
v = 31.4 m/s
The direction of this effective speed is;
θ = tan-1(22.0 m/s / 22.5 m/s)
θ = 44.4°
Learn more: https://brainly.com/question/13322477
If an instalment plan quotes a monthly interest rate of 4%, the effective annual/yearly interest rate would be _____________. 4% Between 4% and 48% 48% More than 48%
Answer:
More than 48%
Explanation:
If the interest is computed monthly on the outstanding balance, it has an effective annual rate of ...
(1 +4%)^12 -1 = 60.1% . . . . more than 48%
The effective annual or yearly interest rate would be=30.56% which is Between 4% and 48%
Calculation of Annual Interest rateThe formula used to calculate annual Interest rate =
[tex](1+ \frac{i}{n} ) {}^{n} - 1[/tex]
where i= nominal interest rate = 4%
n= number of periods= 12 months
Annual Interest rate=
[tex](1 + \frac{4\%}{12} ) {}^{12} - 1[/tex]
= (1+0.333)^12 -1
= (1.333)^12-1
= 31.56 - 1
= 30.56%
Therefore, the effective annual or yearly interest rate would be= 30.56%
Learn more about interest rate here:
https://brainly.com/question/25793394
A small rock with mass 0.12 kg is fastened to a massless string with length 0.80 m to form a pendulum. The pendulum is swinging so as to make a maximum angle of 45 ∘ with the vertical. Air resistance is negligible. Part A What is the speed of the rock when the string passes through the vertical position
Answer:
v = 3.33 m/s
Explanation:
In the position of 45 degrees, all the energy of the rock is gravitational, then we have:
E = m*g*L*cos(angle)
and in the vertical position of the string, all the energy is kinetic, so we have:
E = m*v^2/2
If there is no dissipation, both energies are equal, so we have:
m*g*L*cos(45) = m*v^2/2
9.81 * 0.8 * 0.7071 * 2 = v^2
v^2 = 11.0986
v = 3.33 m/s
help yall 13 points!!
Answer:
Explanation:
12.)
A. Opposite poles attract
B. Same poles repel
13.)
IDK
A plastic rod of length d = 1.5 m lies along the x-axis with its midpoint at the origin. The rod carries a uniform linear charge density λ = 2.5 nC/m. The point P is located on the positive y-axis at a distance y0 = 15 cm from the origin. The z-axis points out of the screen. Integrate your correct choice in part (b) over the length of the rod and choose the correct expression for the y-component of the electric field at point P.
Answer:
Explanation:
Let the plastic rod extends from - L to + L .
consider a small length of dx on the rod on the positive x axis at distance x . charge on it = λ dx where λ is linear charge density .
It will create a field at point P on y -axis . Distance of point P
= √ x² + .15²
electric field at P due to small charged length
dE = k λ dx x / (x² + .15² )
Its component along Y - axis
= dE cosθ where θ is angle between direction of field dE and y axis
= dE x .15 / √ x² + .15²
= k λ dx .15 / (x² + .15² )³/²
If we consider the same strip along the x axis at the same position on negative x axis , same result will be found . It is to be noted that the component of field in perpendicular to y axis will cancel out each other . Now for electric field due to whole rod at point p , we shall have to integrate the above expression from - L to + L
E = ∫ k λ .15 / (x² + .15² )³/² dx
= k λ x L / .15 √( L² / 4 + .15² )
b) The length of the rod:
[tex]E = \int\limits dx . k \lambda .15 / (x^2 + .15^2 )^{1/2} dx\\\\E= \frac{k \lambda * L}{0.15} \sqrt{( L^2 / 4 + .15^2 )[/tex]
Given:
d = 1.5 mλ = 2.5 nC/m
Let the plastic rod extends from - L to + L .Consider a small length of dx on the rod on the positive x axis at distance x . charge on it = λ dx where λ is linear charge density .It will create a field at point P on y -axis.
Distance of point P =[tex]\sqrt{x^2 + 0.15^2}[/tex]
How to calculate Electric Field?E.F at P due to small charged length[tex]dE = \frac{ k \lambda x.dx}{(x^2 + .15^2 )}[/tex]
Its component along Y - axis = dE cosθ where θ is angle between direction of field dE and y axis
[tex]= \frac{dE x .15 }{\sqrt{x^2 + .15^2} }\\\\= \frac{k \lambda dx .15}{(x^2 + .15^2 )^{1/2}}[/tex]
If we consider the same strip along the x axis at the same position on negative x axis , same result will be found . We can say that the component of field in perpendicular to y axis will cancel out each other.
Now for electric field due to whole rod at point p , we shall have to integrate the above expression from - L to + L
[tex]E = \int\limits dx . k \lambda .15 / (x^2 + .15^2 )^{1/2} dx\\\\E= \frac{k \lambda * L}{0.15} \sqrt{( L^2 / 4 + .15^2 )}[/tex]
Find more information about Electric field here:
brainly.com/question/14372859
Olaf is standing on a sheet of ice that covers the football stadium parking lot in Buffalo, New York; there is negligible friction between his feet and the ice. A friend throws Olaf a ball of mass 0.400 kg that is traveling horizontally at 11.3 m/s. Olaf's mass is 75.0 kg. (a) If Olaf catches the ball, with what speed v_f do Olaf and the ball move afterward
Answer:
v = 0.059 m/s
Explanation:
To find the final speed of Olaf and the ball you use the conservation momentum law. The momentum of Olaf and the ball before catches the ball is the same of the momentum of Olaf and the ball after. Then, you have:
[tex]mv_{1i}+Mv_{2i}=(m+M)v[/tex] (1)
m: mass of the ball = 0.400kg
M: mass of Olaf = 75.0 kg
v1i: initial velocity of the ball = 11.3m/s
v2i: initial velocity of Olaf = 0m/s
v: final velocity of Olaf and the ball
You solve the equation (1) for v and replace the values of all variables:
[tex]v=\frac{mv_{1i}}{m+M}=\frac{(0.400kg)(11.3m/s)}{0.400kg+75.0kg}=0.059\frac{m}{s}[/tex]
Hence, after Olaf catches the ball, the velocity of Olaf and the ball is 0.059m/s