Answer:
I think that the fire will continue burning, because the oil and water don't mix and the water is heavier (denser) than oil, so the oil will go up and the fire with it. That's why because the gas station have sand instead of water
Water is heavier than oil. Because oil is lighter and immiscible with water, it will form a separate layer above the surface of the water and continue to burn when water is poured on a large oil fire. As a result, the fire won't be put out.
What happens when you pour water on an oil fire?A small amount of water will instantly sink to the bottom of a pan or deep fryer filled with hot, burning oil and explode there. The Scientific American claims that the characteristics of oils explain why they do not mix with water.
Oil or petroleum-related fires cannot be put out with water. Water sinks below the oil because it is heavier than oil and does not float, allowing the fire to continue to burn. Oil and petroleum fires can be put out with fire extinguishers or sand.
The temperature of the burning substance is lowered by water. The fire goes out when the temperature drops below the burning substance's ignition temperature. Here, the water serves as an acclimatizer.
Thus, it will form a separate layer above the surface of the water and continue to burn when water is poured on a large oil fire.
To learn more about the oil fire, follow the link;
https://brainly.com/question/15173100
#SPJ6
A 5.00-L tank contains helium gas at 1.50 atm. What is the pressure of the gas in mmHg
Answer:
1140 mmHg
Explanation:
1 atmosphere is 760 mmHg, so 1.5 atmospheres is ...
1.5×760 mmHg = 1140 mmHg
Based on VSEPR theory and your observations from the Molecular Geometry lab consider the following questions What is the predicted hybridization at an atom which is surrounded by a double bond and two single bonds?
a) Sp
b) sp^2
c) sp^3
Answer:
b) sp^2
Explanation:
Hybridization refers to the concept that atomic orbitals fuse to form newly hybridized orbitals, which in turn, influences molecular geometry and bonding properties. In chemistry, orbital hybridisation (or hybridization) is the implies the mixing of atomic orbitals to form hybrid orbitals (with different energies, shapes, etc., different from that of the component atomic orbitals) suitable for the pairing of electrons to form chemical bonds according to the principles of the valence bond theory.
In 1931 Linus Pauling proposed the idea of “mixing” the orbitals or “hybridizing” them to account for certain observed bonding patterns. Pauling proposed a sort of a combination of the orbitals giving you an orbital that has partial characters.
Hybridization is merely a mathematical construct. It is never an actual “process” that occurs within orbitals . Hybridization is a mathematical model that describes how the atomic orbitals would’ve looked like based on the observable molecular orbitals.
sp2 hybridization leads to the formation of a double bond. sigma bonds may also be formed depending on the valency of the central atom. In alkenes, an sp2 hybridized carbon atom forms a double bond in addition to two sigma bonds to other atoms.
The predicted hybridization is:
b) [tex]sp^2[/tex]
What does Hybridization tell us?It is the integration of atomic orbitals to shape new orbitals with exclusive energies and shapes than the unique orbitals.
Given: An atom that's surrounded with the aid of using a double bond and unmarried bonds.
[tex]sp^2[/tex] hybridization ends in the formation of a double bond. sigma bonds can also be shaped relying at the valency alkenes, an [tex]sp^2[/tex]sigma bonds to different atoms.
Thus, correct option is b.
Find more information about Hybridization here:
brainly.com/question/26079947
The functional groups in an organic compound can frequently be deduced from its infrared absorption spectrum. A compound containing C, H, and O exhibits broad absorption at 3450 cm^-1 (m) and an intense band at 1725, plus a band at 1100 cm^-1 (m). Relative absorption intensity: (s) = strong, (m) = medium, (w) = weak.
What functional class(es) does the compound belong to?
List only classes for which evidence is given here. Attach no significance to evidence not cited explicitly. Do not over-interpret exact absorption band positions. None of your inferences should depend on small differences like 10 to 20 cm^-1.
The functional class(es) of this compound is(are)________. (Enter letters from the table below, in any order, with no spaces or commas.)
a. alkane (List only if no other functional class applies.)
b. alkene h. amine
c. terminal alkyne i. aldehyde or ketone
d. internal alkyne j. carboxylic acid
e. arene k. ester
f. alcohol l. nitrile
g. ether
Answer:
The functional class(es) of this compound is(are):
alcoholcarboxylic acidesterExplanation:
3450 cm-1 is indicative of OH stretching
1725 cm-1 is indicative of carbonyl group C=O
1100cm-1 shows carbon is bonded to electronegative element e.g C-O
Further information on molecular formula is required for proper structural elucidation
How many moles would 1.204x1024 atoms of oxygen be? (Remember Avogadro's number is 6.022x1023
Answer:
7.25 x 10^47
Explanation:
1.204 x 10^24 moles*6.022 x 10^23 avogadro's number= 7.25 x 10^47
5. Rubbing alcohol is a commonly used disinfectant and has a cooling effect when applied to the skin. The active ingredient in rubbing alcohol is isopropanol. In drugstores, the most common concentration of rubbing alcohol sold contains 70% (vol/vol) isopropanol in water. Assuming the rubbing alcohol manufacturer uses a 100% isopropanol solution, what volume of pure isopropanol is required to produce a 200-mL bottle of rubbing alcohol
Answer:
Explanation:
70% (vol/vol) means
cotnaimns 70 %(vol/vol) 70 ml of isoprapnol is there in 100 ml of Rubbing sold alcohol.
if it is 200 ml then obvouly it has the 70*2 =140 ml of isoproanol required.
Alcohol is an organic compound that when rubbed on the skin it evaporates quickly leaving a cool effect on the skin. The reason why it evaporates is because it has loosely bound molecules and a low boiling temperature.
The volume of pure isopropanol required to produce a 200-ml bottle of rubbing alcohol is 140 ml
From the question:
Alcohol sold contains 70%(vol/vol). This means 70 ml of the solute of isopropanol can be found in 100 ml of solution.
Hence:
100ml of solution = 70ml of isopropanol
200ml of solution = ?
Cross Multiply
200 ml x 70 ml / 100 ml
= 140 ml
Therefore, the volume of pure isopropanol required to produce a 200-ml bottle of rubbing alcohol is 140 ml
To learn more, visit the link below:
https://brainly.com/question/3693273
At the end of a reaction it is important to remove the solvent from a solid product (more than one answer may be correct):
a. So that the melting point can be determined.
b. So that clean NMR spectra can be obtained that do not contain solvent peaks.
c. So that the yield can be determined.
d. So that the solvent can be reused.
Answer:
(B.) and (C.)
b. So that clean NMR spectra can be obtained that do not contain solvent peaks.
c. So that the yield can be determined.
Explanation:
The solvent used in Nuclear Magnetic Resonance (NMR) spectrometer is Trimethyl silane (TMS), a neutral solvent which doesn't give off any signals. Other solvents could have interactions with the radiation, and disrupt the spectra.
Furthermore, for accurate determination of the actual yield and overall percentage yield, solid must be separated from the solvent, dried and weighed.
I hope this was explanatory enough.
One compound in the list below is a gas at room conditions, while all of the others are liquids or solids. For each compound, indicate whether it is the gas or the force most responsible for it being a liquid or solid.
First list:
A. CH3OH
1. a gas2. dispersion forces 3. dipolar forces4. hydrogen bonds5. ionic bonds6. covalent bondsB. CH4
1. a gas2. dispersion forces 3. dipolar forces4. hydrogen bonds5. ionic bonds6. covalent bondsC. CaCO3
1. a gas2. dispersion forces 3. dipolar forces4. hydrogen bonds5. ionic bonds6. covalent bondsD. C6H14
1. a gas2. dispersion forces 3. dipolar forces4. hydrogen bonds5. ionic bonds6. covalent bondsSecond list:
A. H2O
B. C2H2
C. CCl4
D. KCl
Answer:
First list
A. CH3OH----hydrogen bonds
CH4----dispersion forces
CaCO3---ionic bonds
C6H14----dispersion forces
Second list
H2O------ liquid----hydrogen bonds
C2H2----gas---dispersion forces
CCl4---liquid---dispersion forces
KCl----solid---ionic bonds
Explanation:
For every compound, the intermolecular forces decide whether the substance will be solid liquid or gas. Molecules are known to associate with each other in any particular state of matter. These molecules are held together by different intermolecular interactions with varying degrees of strength. The strength of the intermolecular interaction between the molecules of a substance will decide if the substance will be a solid, liquid or gas.
When the intermolecular forces are very strong such as in ionic solids and covalent network solids, the substance exists as a solid. When the intermolecular forces are not so strong such as dispersion forces and hydrogen bonds, the substance exists as a liquid. However, very weak intermolecular dispersion forces are found in gases hence the molecules are relatively free when compared to molecules of liquids and solids.
what type of bond is most likely form between 2 gold atoms
Answer:
Metallic
Explanation:
"Metallic bonding is a type of chemical bonding that rises from the electrostatic attractive force between conduction electrons and positively charged metal ions. It may be described as the sharing of free electrons among a structure of positively charged ions." -Wikipedia
C3H7-C(=O)-NH2 IUPAC NAME ?
Answer:
Amide
Explanation:
O=NH2 is the Amide group versus NH2, which is the amine group.
Answer:
Butamide
Explanation:
C3H7-C(=O)-NH2 IUPAC NAME
C4H9NO
H H H
H - C - C - C - C = O
H H H N - H
H
But amide
Amide because R-CO-NH2 ie C(=O)-NH2
But because 4 Cabon
Calculate the number of moles of magnesium, chlorine, and oxygen atoms in 4.90 moles of magnesium perchlorate, Mg(ClO4)2.]\
Answer:
4.90 moles of [tex]Mg(ClO_4)_2[/tex] will produce (9.8) moles of [tex]Cl^{-}[/tex] ,
(4.90) moles of [tex]Mg^{2+}[/tex] and
(39.2) moles of [tex]O^{2-}[/tex]
Explanation:
From the question we are told that
The number of moles of is [tex]n = 4.90 \ mols[/tex]
The formation reaction of [tex]Mg(ClO_4)_2[/tex] is
[tex]Mg^{2+} + 2 Cl^{-} + 8O^{2+} \to Mg(ClO_4)_2[/tex]
From the reaction we see that
1 mole of [tex]Mg(ClO_4)_2[/tex] is formed by 2 moles of [tex]Cl^{-}[/tex] 1 mole of [tex]Mg^{2+}[/tex] and 4 [tex]O^{2-}[/tex]
This implies that
4.90 moles of [tex]Mg(ClO_4)_2[/tex] will produce (2 * 4.90) moles of [tex]Cl^{-}[/tex] ,
(1 * 4.90) moles of [tex]Mg^{2+}[/tex] and
(8 * 4.90) moles of [tex]O^{2-}[/tex]
So
4.90 moles of [tex]Mg(ClO_4)_2[/tex] will produce (9.8) moles of [tex]Cl^{-}[/tex] ,
(4.90) moles of [tex]Mg^{2+}[/tex] and
(39.2) moles of [tex]O^{2-}[/tex]
Answer:
- [tex]n_{Mg}=4.90molMg[/tex]
- [tex]n_{Cl}=9.6molCl[/tex]
- [tex]n_{O}=38.4molO[/tex]
Explanation:
Hello,
In this case, for the given 4.90 moles of magnesium perchlorate, we can compute the moles of each atom by identifying the subscript each atom has in the molecule as shown below:
- Moles of magnesium atoms: here, one mole of magnesium perchlorate has only one mole of magnesium atom (subscript is one), this the moles of magnesium atoms are also 4.90 moles.
- Moles of chlorine atoms: here, one mole of magnesium perchlorate has two moles of chlorine atoms as it has a two out of the parenthesis enclosing the perchlorate anion, thus, we have:
[tex]n_{Cl}=4.80molMg(ClO_4)_2*\frac{2molCl}{1molMg(ClO_4)_2} =9.6molCl[/tex]
- Moles of oxygen atoms: here, one mole of magnesium perchlorate has eight moles of oxygen atoms as it has a four in the oxygen subscript and a two out of the parenthesis enclosing the perchlorate anion, thus, we have:
[tex]n_{O}=4.80molMg(ClO_4)_2*\frac{8molO}{1molMg(ClO_4)_2} =38.4molO[/tex]
Best regards.
Which of the following provides evidence to support Thomson's hypothesis about electrons??
A.) Gold foil experiment
B.) Cathode ray experiments
C.)Spectrum of colors emitted by gas
D.) Radiation produced when beryllium is bombarded with alpha particles
Cathode ray experiments of the following provides evidence to support Thomson's hypothesis about electrons.
What is the hypothesis of Thomson's atomic model?Rutherford's gold leaf experiment demonstrated that the atom is essentially empty space with such a tiny, compact, positively-charged nucleus. Thomson had proposed the plum pie model of the atom, which featured negatively-charged electrons buried within a favorably "soup." Since most of the alpha particles flow through an atom directly without being deflected, contrary to what Thomson's model predicted, the majority of a space inside of an atom is empty. As a result, the Thomson model of a molecule was disproved.
Who disproved Thomson's theory?According to Thomson's model, every atom is made up of negative charges "plums" surrounded in positively charged "pudding," or electrons with a soup of positive ion to balance their negative charges. Hans Geiger and Arthur Marsden's 1909 gold foil test refuted the 1904 Thomson model.
To know more about Thomson hypothesis visit:
https://brainly.com/question/28824828
#SPJ2
The chemical equation and thermodynamic data for the melting of tungsten are given above. Based on this information, which of the following provides the best predictions correc whether a sample of pure tungsten will melt at 3723 K?
A. The sample will not melt because T > H/s
B. The sample will not melt because T< H/s
C. The sample will mel because T>
D. The sample will mel because T
Based on the information above provided, the best predictions correct whether a sample of pure tungsten will melt at 3723 K is The sample will mel because T>
TungstenTungsten is a very hard and brittle material. It properties include a very high melting point, a low vapor pressure and the highest hardness and strength of all metals. Tungsten has good corrosion resistance against most acids and alkalis.
Learn more about tungsten:
https://brainly.com/question/11014899
why does Portland have moderate climate
Answer:
Due to its location, Portland has a moderate climate. Also, which portland are you talking about? Portland Oregon or Portland Maine. Portland Oregon has a much more rainy climate, so I would say Maine has a better climate.
Explanation:
You are trying to recrystallize compound X. You consider using ethyl acetate as your recrystallizing solvent and test a small amount of compound X with ethyl acetate. You find that compound X is soluble in ethyl acetate at room temperature and at boiling. Is ethyl acetate a good recrystallization solvent? No, the sample needs to be insoluble or sparingly soluble at room temperature so that the maximum amount of purified crystals form at room temperature and in the ice bath. Yes, you want the sample to fully dissolve at room temperature and boiling so that it will crystallize in the ice bath. Yes, you can only be sure that all the impurities dissolved if the sample is soluble at room temperature
Answer:
No, the sample needs to be insoluble or sparingly soluble at room temperature so that the maximum amount of purified crystals form at room temperature and in the ice bath.
Explanation:
For a solvent to be adequate it must completely dissolve the substance to be purified when it is hot, that is, at boiling temperature only. It should be practically insoluble when the solvent is cold or at room temperature. This must occur in this way since impurities must be removed by hot filtering or dissolved in the mother liquor.
What are the relations between Electrochemistry and Cancer?
Answer: if im not wrong the relations are that the electrochemistry can detect the cancer and any other sickness
just like it does with chemical phenomena
=)
Which of the following is a chemical property of iron? It
Answer:
is capable of combining with oxygen to form iron oxide
Given the equation:
н
H
H
H
H H H H H H
1
H H
7
C=C
/
H H
+
+
C=C
...
... -
C=C
/
Н.
с C-C-...
|
TI
H H H H H H
I-O-I
I-O-I
1
Н
H
н
Which type of reaction is represented by this equation?
1.
combustion
2.
esterification
3.
polymerization
4
substitution
Submit Answer
Answer:
The type of reaction is Polymerization
Answer:
combustion?
Explanation:
Yo, like what is that question.
How could the government enforce ethical standards of scientific
experiments?
A. The government could encourage scientists to make up their own
minds about ethics.
B. The government could take away research funds if ethical
standards are not met.
C. The government could let scientists monitor each other to
encourage ethical behavior.
D. The government could encourage the public to take a stand
against unethical scientists.
Answer: D. The Government could take away research funds if ethical standards are not met
The government enforce ethical standards of scientific experiments
B. The government could take away research funds if ethical
standards are not met.
Ethical standards are a set of principles established by the founders of the organization to communicate its underlying moral values. This code provides a framework that can be used as a reference for decision making processes.
How does the government control scientific research?Politicians and bureaucrats control scientific research and research outcomes by selectively funding projects that look for potential disasters, ideally global disasters.
What are the 8 ethical standards?This analysis focuses on whether and how the statements in these eight codes specify core moral norms (Autonomy, Beneficence, Non-Maleficence, and Justice), core behavioral norms (Veracity, Privacy, Confidentiality, and Fidelity), and other norms that are empirically derived from the code statements.
To learn more about ethical standards, refer
https://brainly.com/question/13205036
#SPJ2
Asbestosis is a lung disease caused by inhaling asbestos fibers. The US Department of Health and Human Services considers a particular form of asbestos to be a carcinogen. The composition of this form of asbestos is 26.31% Mg, 20.20% Is, 1.45% H and the rest of the mass is due to oxygen. The molar mass of the compound is 277 g/mol. What is the molecular formula for the carcinogenic form of asbestos
Answer: The molecular formula for the carcinogenic form of asbestos [tex]Mg_3Si_2H_4O_9[/tex]
Explanation:
a) If percentage are given then we are taking total mass is 100 grams.
So, the mass of each element is equal to the percentage given.
Mass of Mg = 26.31 g
Mass of Si= 20.20 g
Mass of H= 1.45 g
Mass of O= (100-(26.31+ 20.20+ 1.45)) = 52.04 g
Step 1 : convert given masses into moles
Moles of Mg=[tex]\frac{\text{ given mass of Mg}}{\text{ molar mass of Mg}}= \frac{26.31g}{24g/mole}=1.10moles[/tex]
Moles of Si=[tex]\frac{\text{ given mass of Si}}{\text{ molar mass of Si}}= \frac{20.20g}{28g/mole}=0.72moles[/tex]
Moles of H=[tex]\frac{\text{ given mass of H}}{\text{ molar mass of H}}= \frac{1.45g}{1g/mole}=1.45moles[/tex]
Moles of O=[tex]\frac{\text{ given mass of O}}{\text{ molar mass of O}}= \frac{52.04g}{16g/mole}=3.25moles[/tex]
Step 2 : For the mole ratio, divide each value of moles by the smallest number of moles calculated.
For Mg = [tex]\frac{1.10}{0.72}=1.5[/tex]
For Si =[tex]\frac{0.72}{0.72}=1[/tex]
For H=[tex]\frac{1.45}{0.72}=2[/tex]
For O =[tex]\frac{3.25}{0.72}=4.5[/tex]
The ratio of Mg : Si: H: O = 1.5 : 1 : 2 : 4.5
Converting them into whole numbers :
The ratio of Mg : Si: H: O = 3 : 2 : 4 : 9
Hence the empirical formula is [tex]Mg_3Si_2H_4O_9[/tex]
Empirical mass =[tex]3\times 24+2\times 28+4\times 1+9\times 16=276g[/tex]
Molecular mass = 277 g
[tex]n= \frac{\text {Molecular mass}}{\text {Empirical mass}}=\frac{277}{276}=1[/tex]
Thus molecular formula =[tex]1\times Mg_3Si_2H_4O_9=Mg_3Si_2H_4O_9[/tex]
When vinylcyclohexane is treated with in dichloromethane, the major product is (2-bromo ethylidene)cyclohexane . Account for the formation of this product by drawing the structure of the most stable radical intermediate. Include all valence lone pairs in your answer. Include all valence radical electrons in your answer.
Answer:
Explanation:
Vinylcyclohexane is an example of a cyclic hydrocarbon where the vinyl group (-CH=CH₂ ) attaches itself to an end of a cyclohexane in ring form thereby giving rise to a vinylcyclohexane. The vinyl group are ethylene with a reduction in one hydrogen atom given them the name vinyl.
SOo, when vinylcyclohexane is treated with NBS ( i.e N-Bromosuccinimide a chemical reagent used in organic reactions) ; the bromine in the NBS reacts with the cyclohexane thereby giving rise to a allyl radical first. The allyl radical is resonance stabilized radical with an unpaired electron on the allylic carbon . As a result of stabilization ; a more stable substituted cycloalkene is formed as an intermediate .
This stable substituted cycloalkene intermediate then finally react with a bromine ion to give a major product known as ; (2-bromo ethylidene)cyclohexane.
The diagram emphasizing more on the above explanation can be seen in the attached image below
Please help! (:
question above — how much money would you need to buy 7.0 lb of arugula? If 27lb of arugula cost $16
Answer:
$11.81
Explanation:
27 lb cost $16
27/16=$1.69 per pound
$1.69*7=$11.81 for 7 lbs
Monel metal is a corrosion-resistant copper-nickel alloy used in the electronics industry. A particular alloy with a density of 8.80 g/cm3 and containing 0.090 % Si by mass is used to make a rectangular plate that is 15.0 cm long, 12.5 cm wide, and 3.50 mm thick and has a 2.50-cm-diameter hole drilled through its center such that the height of the hole is 3.50 mm .
The silicon in the plate is a mixture of naturally occurring isotopes. One of the those isotopes is silicon-30, which has an atomic mass of 29.97376 amu. The percent natural abundance, which refers to the atoms of a specific isotope, of silicon-30 is 3.10%.
Part A What is the volume of the plate?Express the volume numerically in cubic centimeters.
Part B How many silicon-30 atoms are found in this plate?
Express your answer numerically using two significant figures.
Answer:
Based on the given question, the dimensions of the plate is 15 cm in length, 12.5 cm in width, and 3.50 mm in thickness (0.350 cm). Now the volume of the plate will be,
V = 15 cm × 12.5 cm × 0.350 cm = 65.62 cm³
A hole of diameter 2.50 cm is drilled through the center of the plate, at the height of 3.50 mm or 0.350 cm. Now the volume of the hole is π(r)²h,
= 22/7 × (1.25 cm)² × 0.350 cm = 1.72 cm³
Thus, the volume of the plate will be determined by subtracting the volume of plate with the volume of hole, which will be,
65.62 cm³ - 1.72 cm³ = 63.9 cm³
The density of the alloy is 8.80 g/cm³, therefore, the mass of the alloy can be determined by using the formula, mass = density * volume
mass = 8.80 g/cm³ × 63.9 cm³ = 562.32 grams
Of the total alloy, 0.090 percent is Si, that is,
(0.090/100) × 562.32 g = 0.506 grams of Si
The natural abundance of the element is not determined by mass but by the number of atoms it possess. For this Avogadro's number and atomic mass of Si is used. Now the number of atoms of Si present is,
(0.506 g) (1 mol/28.0855 g) (6.023 × 10²³ atoms /mol) = 1.08 × 10²² Si atoms
Of these Si atoms, 3.10 percent are Si-30 so,
= (3.10 / 100) × (1.08 × 10²² atoms) / 1000 = 3.34 × 10²⁰ atoms of Si-30. or 3.4 × 10²⁰ atoms
The equilibrium constant, Kc, for the following reaction is 4.76×10-4 at 431 K. PCl5(g) PCl3(g) + Cl2(g) When a sufficiently large sample of PCl5(g) is introduced into an evacuated vessel at 431 K, the equilibrium concentration of Cl2(g) is found to be 0.233 M. Calculate the concentration of PCl5 in the equilibrium mixture. M
Answer:
Explanation:
Step 1: Data given
The equilibrium constant, Kc, for the following reaction is 4.76 * 10^-4 at 431 K
The equilibrium concentration of Cl2(g) is 0.233 M
Step 2: The balanced equation
PCl5(g) ⇄ PCl3(g) + Cl2(g)
Step 3: The initial concentration
[PCl5]= Y M
[PCl] = 0M
[Cl2] = 0M
Step 4: Calculate the concentration at equilibrium
[PCl5] = Y + X M = Y - 0.233 M
[PCl]= XM = 0.233 M
[Cl2]= XM = 0.233 M
Step 5: Define Kc
Kc = [Cl2]* [PCl3] / [PCl5]
4.76 * 10^-4 = 0.233² / (Y -0.233)
0.000476 = 0.05429 / (Y - 0.233)
Y - 0.233 = 0.05429 / 0.000476
Y - 0.233 = 114.05 M
Y = 114.283 M = the initial concentration
The concentration of PCl5 at the equilibrium is 114.05 M
Which of these tasks would a geologist be most likely to perform?
A. Determining the species of a recently collected specimen
O B. Hypothesizing how pieces of ancient pottery were used
O C. Creating a new kind of material using polymers
O D. Determining the best method to extract underground natural gas
SUBMIT
Answer:
Explanation:
O B. Hypothesizing how pieces of ancient pottery were used
What did John Dalton publish?
Answer:
An early theory describing properties of atoms.
Explanation:
Apex
Which statement BEST describes how a golf club does "work" on a golf ball?
(A) When the club hits the ball the club transfers all of its kinetic energy to the ball.
(B) All of the kinetic energy from the club is transferred to the ball as they both move through the air.
(C)
Some of the kinetic energy from the golf club is transferred to the ball and some transforms into sound
and heat, but the total energy remains the same.
(D) The golf club loses kinetic energy when it hits the ball and the ball gains kinetic energy from the air as it
travels
Answer:
C
Explanation:
It looks pretty reasonable to me
Which of the following best describes isotopes?
An element with the same number of neutrons, but a different number of protons.
An element with the same number of protons, but a different number of electrons.
An element with the same number of electrons, but a different number of neutrons
An element with the same number of protons, but a different number of neutrons
Answer: An element with the same number of protons, but a different number of neutrons
Explanation:
The # of protons in an atom is what determines what atom it is (hydrogen has 1 proton, helium has 2 protons, etc ...). You cannot change the number of protons in an atom without changing what element the atom is.
The number of electrons in atoms varies greatly because electrons are constantly gained, lost, and shared during chemical reactions.
An isotope is a variation of the same element (so they must have the same # of protons) that have different masses (and therefore a different number of neutrons).
The answer is the fourth choice, "An element with the same number of protons, but a different number of neutrons"
The isotopes refer to an element that consists of a similar number of protons but have a distinct no of neutrons.
What are isotopes:It is considered to be the members of the family with respect to the elements that consist of a similar number of protons but have a distinct no of neutrons. The no of protons in the nucleus measured the atomic number of elements based on the periodic table.
Therefore, the fourth option is correct.
Learn more about isotopes here: https://brainly.com/question/22318349
Suppose that a wave has a period of 0.03 seconds what is its frequency be sure to show the steps for your work
Answer:
f = 33.34 Hz
Explanation:
A wave has a period of 0.03 seconds. It is required to find the frequency of a wave. The relation between time period and frequency is inverse. The time period of a wave is given by :
T = 1/f, f = frequency of wave
[tex]f=\dfrac{1}{T}\\\\f=\dfrac{1}{0.03}\\\\f=33.34\ Hz[/tex]
So, the frequency of the wave is 33.34 Hz.
Find the age ttt of a sample, if the total mass of carbon in the sample is mcmcm_c, the activity of the sample is AAA, the current ratio of the mass of 14 6C 614C to the total mass of carbon in the atmosphere is rrr, and the decay constant of 14 6C 614C is λλlambda. Assume that, at any time, 14 6C 614C is a negligible fraction of the total mass of carbon and that the measured activity of the sample is purely due to 14 6C 614C. Also assume that the ratio of mass of 14 6C 614C to total carbon mass in the atmosphere (the source of the carbon in the sample) is the same at present and on the day when the number of 14 6C 614C atoms in the sample was set. Express your answer in terms of the mass mamam_a of a 14 6C 614C atom, mcmcm_c, AAA, rrr, and λλlambda. View Available Hint(s)
Answer:
Explanation:
An artifact is found in a desert cave. The anthropologists who found this artifact would like to know its age. They find that the present activity of the artifact is 9.25 decays/s and that the mass of carbon in the artifact is 0.100 kg. To find the age of the artifact, they will need to use the following constants:
r=1.2
The activity of carbon 14 is
[tex]A=A_0e^{\lambda t}[/tex]
where,
[tex]A_0[/tex] is the initial activity of the compound
Solve for t
[tex]-\lambda t=In\frac{A}{A_0}[/tex]
[tex]t=-\frac{1}{\lambda} In(\frac{A}{A_0} )[/tex]
[tex]=-\frac{1}{\lambda} In(\frac{A}{\lambda r(\frac{m_c}{m_a} )} )[/tex]
since,
[tex]A_0=\lambda r(\frac{m_c}{m_a} )[/tex]
[tex]=-\frac{1}{\lambda} In(\frac{A\ m_a}{\lambda r m_c} )[/tex]
Now, the age of the artifact is
[tex]=-\frac{1}{\lambda} In(\frac{A\ m_a}{\lambda r m_c} )[/tex]
[tex]=-\frac{1}{1.21\times 10^{-4}} In(\frac{(9.25)(2.32\times 10^{-26}}{1.21\times 10^{-4}(\frac{1}{3.15569\times10^7} )(1.2\times 10^{-12})(0.100)}} )\\\\=6303.4 \ years[/tex]
to two significant figure = 6300 years
List three ways the rate of solvation of sodium chloride in water may be
increased
Answer:
1) Increasing temperature
2) Stirring
3) Increasing surface area of salt by grinding it