Answer:
The number of molecules displaced in a vibration makes the amplitude of a sound.
Two identical objects are pressed against two different springs so that each spring stores 55.0J of potential energy. The objects are then released from rest. One spring is quite stiff (hard to compress), while the other one is quite flexible (easy to compress).Which of the following statements is or are true? (More than one statement may be true.)A. Both objects will have the same maximum speed after being released.B. The object pressed against the stiff spring will gain more kinetic energy than the other object.C. Both springs are initially compressed by the same amount.D. The stiff spring has a larger spring constant than the flexible spring.E. The flexible spring must have been compressed more than the stiff spring.
Answer:
A , D , E
Explanation:
Solution:-
- Consider the two identical objects with mass ( m ).
- The stiffness of the springs are ( k1 and k2 ).
- Both the spring store 55.0 J of potential energy.
- We will apply the principle of energy conservation on both the systems. In both cases the spring stores 55.0 Joules of energy. Once released, the objects gain kinetic energy with a consequent loss of potential energy in either spring.
- The maximum speed ( v ) is attained when all the potential energy is converted to kinetic energy.
- Apply Energy conservation for spring with stiffness ( k1 ).
ΔU = ΔEk
55.0 = 0.5*m*v^2
v = √ ( 110 / m )
- Apply Energy conservation for spring with stiffness ( k2 ).
ΔU = ΔEk
55.0 = 0.5*m*v^2
v = √ ( 110 / m )
Answer: Both objects will have the same maximum speed ( A )
- We are told that one spring is more stiff as compared to the other one. The measure of stiffness is proportionally quantified by the spring constant. To mathematically express we can write it as:
k1 > k2
Where,
k1: The stiff spring
k2: The flexible spring
Answer: The stiff spring has a larger spring constant than the flexible spring. ( D )
- We will assume that the spring with constant ( k1 ) undergoes a displacement ( x1 ) and the spring with constant ( k2 ) undergoes a displacement ( x2 ). The potential energy stored in both spring is the same. Hence,
U1 = U2
0.5*( k1 ) * ( x1 )^2 = 0.5*( k2 ) * ( x2 )^2
[ k1 / k2 ] = [ x2 / x1 ]^2
Since,
k1 > k2 , then [ k1 / k2 ] > 1
Then,
[ x2 / x1 ]^2 > 1
[ x2 / x1 ] > 1
x2 > x1
Answer: The flexible spring ( x2 ) was compressed more than the stiff spring ( x1 ). ( E )
A ride-sharing car moving along a straight section of road starts from rest, accelerating at 2.00 m/s2 until it reaches a speed of 28.0 m/s. Then the vehicle moves for 41.0 s at constant speed until the brakes are applied, stopping the vehicle in a uniform manner in an additional 5.00 s.
(a) How long is the ride-sharing car in motion (in s)?
(b) What is the average velocity of the ride-sharing car for the motion described? (Enter the magnitude in m/s.)
Answer:
Explanation:
Time taken to accelerate to 28 m /s
= 28 / 2 = 14 s
a ) Total length of time in motion
= 14 + 41 + 5
= 60 s .
b )
Distance covered while accelerating
s = ut + 1/2 at²
= 0 + .5 x 2 x 14²
= 196 m .
Distance covered while moving in uniform motion
= 28 x 41
= 1148 m
distance covered while decelerating
v = u - at
0 = 28 - a x 5
a = 5.6 m / s²
v² = u² - 2 a s
0 = 28² - 2 x 5.6 x s
s = 28² / 2 x 5.6
= 70 m .
Total distance covered
= 196 + 1148 + 70
= 1414 m
total time taken = 60 s
average velocity
= 1414 / 60
= 23.56 m /s .
assuming 100% efficient energy conversion how much water stored behind a 50 centimeter high hydroelectric dam would be required to charged the battery
Answer:
The amount of water that will power a battery with that rating = 7.35 m³
Explanation:
The power rating for the battery is missing from the question.
Complete Question
Assuming 100% efficient energy conversion how much water stored behind a 50 centimeter high hydroelectric dam would be required to charged the battery with power rating, 12 V, 50 Ampere-minutes
Solution
Potential energy possessed by water at that height = mgH
m = mass of the water = ρV
ρ = density of water = 1000 kg/m³
V = volume of water = ?
g = acceleration due to gravity = 9.8 m/s²
H = height of water = 50 cm = 0.5 m
Potential energy = ρVgH = 1000 × V × 9.8 × 0.5 = (4900V) J
Energy of the battery = qV
q = 50 A.h = 50 × 60 = 3,000 C
V = 12 V
qV = 3,000 × 12 = 36,000 J
Energy = 36,000 J
At a 100% conversion rate, the energy of the water totally powers the battery
(4900V) = (36,000)
4900V = 36,000
V = (36,000/4900)
V = 7.35 m³
Hope this Helps!!!
a body with v=20m/s changes its speed to 28m/s in 2sec. its acceleration will be
Answer:
Explanation:
Givens
vi = 20 m/s
vf = 28 m/s
t = 2 seconds
Formula
a = (vf - vi) / t
Solution
a = (28 - 20)/2
a = 8/2
a = 4 m/s^2
A rocket rises vertically, from rest, with an acceleration of 3.99 m/s2 until it runs out of fuel at an altitude of 775 m. After this point, its acceleration is due to gravity downwards. What is the speed of the rocket, in m/s, when it runs out of fuel?
Answer:
Vf = 78.64 m/s
Explanation:
The rocket is travelling upward at a constant acceleration of 3.99 m/s² until it runs out of fuel. So, in order to calculate its velocity at the point, where it runs out of fuel, we can simply use 3rd equation of motion:
2as = Vf² - Vi²
where,
a = acceleration = 3.99 m/s²
s = distance or height covered by rocket till fuel runs out = 775 m
Vf = Final Velocity = ?
Vi = Initial velocity = 0 m/s (Since, rocket starts from rest)
Therefore,
2(3.99 m/s²)(775 m) = Vf² - (0 m/s)²
Vf = √(6184.5 m²/s²)
Vf = 78.64 m/s
A uniform ladder stands on a rough floor and rests against a frictionless wall. Since the floor is rough, it exerts both a normal force N1 and a frictional force f1 on the ladder. However, since the wall is frictionless, it exerts only a normal force N2 on the ladder. The ladder has a length of L = 4.6m, a weight of WL= 69.0N , and rests against the wall a distance d = 3.75 m above the floor. If a person with a mass of m = 90 kg is standing on the ladder, determine the forces exerted on the ladder when the person is halfway up the ladder.
Required:
Solve of N1, N2 and f1
Answer:
The normal force N1 exerted by the floor is [tex]N_1 = 951 \ N[/tex]
The normal force N2 exerted by the wall is [tex]N_2= 616.43 \ N[/tex]
The frictional force exerted by the wall is [tex]f = N_2 = 616.43 \ N[/tex]
Explanation:
From the question we are told that
The length of the ladder is [tex]L = 4.6 \ m[/tex]
The weight of the ladder is
The distance of the ladder position on the wall from the floor is [tex]D = 3.75 \ m[/tex]
The mass of the person is [tex]m = 90 kg[/tex]
Applying Pythagoras theorem
The length of the position the ladder on the ground from the base of the wall is
[tex]A = \sqrt{L^ 2 - D^2}[/tex]
substituting values
[tex]A = \sqrt{(4.6^2)-(3.75^2)}[/tex]
[tex]A = 2.66 \ m[/tex]
In order the for the ladder not to shift from the ground the sum of the moment about the position of the ladder on the ground must be equal to zero this is mathematically represented as
[tex]\sum M = 0 = N_2 * D - [\frac{1}{2} * W_L ] * [(mg) *A ][/tex]
[tex]\sum M = 0 = N_2 * 3.75 - [\frac{1}{2} * 69.0 ] * [(90*9.8) * \frac{4.6}{2.66} ][/tex]
[tex]N_2 * 3.75 =2311.62[/tex]
[tex]N_2 * 3.75 =2311.62[/tex]
[tex]N_2= 616.43 \ N[/tex]
Now the force exerted by the floor on the ladder is mathematically represented as
[tex]N_1 = W_L + (m * g )[/tex]
substituting values
[tex]N_1 = 951 \ N[/tex]
Now the horizontal forces acting on the ladder are [tex]N_2 \ and \ f[/tex] and they are in opposite direction so
[tex]f = N_2 = 616.43 \ N[/tex]
The velocity of an object is given by the expression v (t) = 3.00 m / s + (2.00 m / s ^ 3) t ^ 2. Determine the position of the object as a function of time if it is located at x = 1.00 m at time t = 0.00 s.
Answer: [tex]x=\frac{2}{3}t^3+3t+1[/tex]
Explanation:
Given
velocity of object is given by
[tex]v(t)=3+2t^2[/tex]
and we know change of position w.r.t time is velocity
[tex]\Rightarrow \dfrac{dx}{dt}=v[/tex]
[tex]\Rightarrow \dfrac{dx}{dt}=3+2t^2[/tex]
[tex]\Rightarrow dx=(3+2t^2)dt[/tex]
Integrating both sides we get
[tex]\Rightarrow \int_{1}^{x}dx=\int_{0}^{t}(3+2t^2)dt[/tex]
[tex]\Rightarrow x\mid _{1}^{x}=(3t+\frac{2}{3}t^3)\mid _{0}^{t}[/tex]
[tex]\Rightarrow x-1=3(t-0)+\frac{2}{3}(t^3-0)[/tex]
[tex]\Rightarrow x=\frac{2}{3}t^3+3t+1[/tex]
A carousel has a diameter of 6.0-m and completes one rotation every 1.7s. Find the centripetal acceleration of the traveler in m / s2.
Answer:
The centripetal acceleration of the traveler is [tex]40.98\ m/s^2[/tex]
Explanation:
It is given that, A carousel has a diameter of 6.0-m and completes one rotation every 1.7 s.
We need to find the centripetal acceleration of the traveler. It is given by the formula as follows :
[tex]a=\dfrac{v^2}{r}[/tex]
r is radius of carousel
[tex]v=\dfrac{2\pi r}{T}[/tex]
So,
[tex]a=\dfrac{4\pi ^2r}{T^2}[/tex]
Plugging all the values we get :
[tex]a=\dfrac{4\pi ^2\times 3}{(1.7)^2}\\\\a=40.98\ m/s^2[/tex]
So, the centripetal acceleration of the traveler is [tex]40.98\ m/s^2[/tex].
A book of 500 leaves has a mass of 1kg if its thickness is 5cm what are the mass and thickness of each leaf
Answer:
0.002kg and 0.01cm
Explanation:
500 leaves has a thickness is 5cm
Means I leaf has a thickness of 5/500= 0.01cm
Similarly the mass of one leaf would be 1/500 =0.002kg
A rod of mass M = 154 g and length L = 35 cm can rotate about a hinge at its left end and is initially at rest. A putty ball of mass m = 11 g, moving with speed V = 9 m/s, strikes the rod at angle θ = 29° a distance D = L/3 from the end and sticks to the rod after the collision.Calculate the rotational kinetic energy, in joules, of the system after the collision.
Answer:
Explanation:
moment of inertia of the rod = 1/3 mL² , m is mass and L is length of rod.
1/3 x .154 x .35²
= .00629
moment of inertia of putty about the axis of rotation
= m d² , m is mass of putty and d is distance fro axis
= .011 x( .35 / 3 )²
= .00015
Total moment of inertia I = .00644 kgm²
angular momentum of putty about the axis of rotation
= mvRsinθ
m is mass , v is velocity , R is distance where it strikes the rod and θ is angle with the rod at which putty strikes
= .011 x 9 x .35 / 3 x sin 29
= .0056
Applying conservation of angular momentum
angular momentum of putty = angular momentum of system after of collision
.0056 = .00644 ω where ω is angular velocity of the rod after collision
ω = .87 rad /s .
Rotational energy
= 1/2 I ω²
I is total moment of inertia
= .5 x .00644 x .87²
= 2.44 x 10⁻³ J .
What is the goal of the Standing Waves lab? Group of answer choices To determine how frequency changes with mode number. To determine the velocity of a wave traveling on string. To determine wavelength of a wave on a string. To be the very best like no one ever was.
Answer:
To determine wavelength of a wave on a string.
Explanation:
The Standing Waves lab study the parameters that affect standing waves in various strings. The effects of string tension and density on wavelength and frequency will be studied.
A 888 kg car is driven clockwise around a flat circular track of radius 59 m. The speed of the car is a constant 7 m/s. Which factor, when doubled, would produce the greatest change in the centripetal force acting on the car? A. Radius of the track B. Weight of the car C. Mass of the car D. Velocity of the car
Answer:
D. Velocity of the car
Explanation:
The centripetal force acting on the car is given by the following formula:
[tex]F_c=ma_c=m\frac{v^2}{r}[/tex] (1)
m: mass of the car = 888 kg
v: tangential speed of the car = 7 m/s
r: radius of the flat circular track = 59 m
By the form of the equation (1) you can notice that the greatest change in the centripetal force is obtained when the velocity v is twice. In fact, you have:
[tex]F_c=m\frac{(2v)^2}{r}=4m\frac{v^2}{r}=4F_c[/tex]
Then, the greatest values of the centripetal force is:
[tex]F_c=4(888kg)\frac{(7m/s)^2}{59m}=2949.96N[/tex]
The greatest change in Fc is obtained by changing the value of the speed
answer
D. Velocity of the car
Inside a stereo speaker, you will find two permanent magnets: one on the cone and one near the cone. True of false?
Answer:
false
Explanation:
A person is swimming in a river with a current that has speed vR with respect to the shore. The swimmer first swims downstream (i.e. in the direction of the current) at a constant speed, vS, with respect to the water. The swimmer travels a distance D in a time tOut. The swimmer then changes direction to swim upstream (i.e. against the direction of the current) at a constant speed, vS, with respect to the water and returns to her original starting point (located a distance D from her turn-around point) in a time tIn. What is tOut in terms of vR, vS, and D, as needed?
Answer:
The time taken is [tex]t_{out} = \frac{D}{v__{R}} + v__{S}}}[/tex]
Explanation:
From the question we are told that
The speed of the current is [tex]v__{R}}[/tex]
The speed of the swimmer in direction of current is [tex]v__{S}}[/tex]
The distance traveled by the swimmer is [tex]D[/tex]
The time taken to travel this distance is [tex]t_{out}[/tex]
The speed of the swimmer against direction of current is [tex]v__{s}}[/tex]
The resultant speed for downstream current is
[tex]V_{r} = v__{S}} +v__{R}}[/tex]
The time taken can be mathematically represented as
[tex]t_{out} = \frac{D}{V_{r}}[/tex]
[tex]t_{out} = \frac{D}{v__{R}} + v__{S}}}[/tex]
Help with this answer please
Answer:
Everytime you do an experiment you need something that is regular. For example if you try and measure how much germs spread in bread. you need 1 bread thats clean and 3 different breads for different molds. So thats called a CONTROL
AAAAAAAAAAAA is the answer
Two workers are sliding 330 kg crate across the floor. One worker pushes forward on the crate with a force of 430 N while the other pulls in the same direction with a force of 330 N using a rope connected to the crate. Both forces are horizontal, and the crate slides with a constant speed. What is the crate's coefficient of kinetic friction on the floor?
Answer:
Coefficient of kinetic friction = 0.235
Explanation:
Given:
Mass of crate = 330 kg
1st force = 430 N
2nd force = 330 N
Find:
Coefficient of kinetic friction.
Computation:
We know that, velocity is constant.
So, acceleration (a) = 0
So, net force (f) = 430 N + 330 N
Net force (f) = 760 N
F = μmg
μ = f / mg [∵ g = 9.8]
μ = 760 / [330 × 9.8]
μ = 760 / [3,234]
μ = 0.235
Coefficient of kinetic friction = 0.235
uring a collision with a wall, the velocity of a 0.200-kg ball changes from 20.0 m/s toward the wall to 12.0 m/s away from the wall. If the time the ball was in contact with the wall was 60.0 ms, what was the magnitude of the average force applied to the ball? During a collision with a wall, the velocity of a 0.200-kg ball changes from 20.0 m/s toward the wall to 12.0 m/s away from the wall. If the time the ball was in contact with the wall was 60.0 ms, what was the magnitude of the average force applied to the ball? 26.7 N 16.7 N 13.3 N 107 N 40.0 N
Answer:
107 N, option d
Explanation:
Given that
mass of the ball, m = 0.2 kg
initial velocity of the ball, u = 20 m/s
final velocity of the ball, v = -12 m/s
time taken, Δt = 60 ms
Solving this question makes us remember "Impulse Theorem"
It states that, "that the product between the average force applied and the duration of the collision is equal to the change in momentum of the object"
Mathematically, it is represented as
FΔt = m(v - u), where
F = the average force
Δt = time taken
m = mass of the ball
v = final velocity of the ball
u = initial velocity of the ball
From the question we were given, if we substitute the values in it, we have
F = ?
Δt = 60 ms = 0.06s
m = 0.2 kg
v = -12 m/s
u = 20 m/s
F = 0.2(-12 - 20) / 0.06
F = (0.2 * -32) / 0.06
F = -6.4 / 0.06
F = -106.7 N
Thus, the magnitude is 107 N
Which factor caused higher oil prices to directly lead to inflation?
It increased demand for cars, leading to higher automobile prices.
Companies passed on production and transportation costs to consumers.
The government began to print more money.
Gas prices declined too quickly, leading to oversupply
Answer: B, Companies passed on production and transportation costs to consumers
Explanation:
A higher oil price occurred when companies passed on production and transportation costs to consumers.
Cause of high price of oilThe oil producing companies spend so much money in producing crude oil from the reservoirs to the surface. They also spend money in processing and transporting the crude oil to the end users or consumers.
The final price of the oil depends on the total amount spent by these companies in producing the hydrocarbons.
Thus, a higher oil price occurred when companies passed on production and transportation costs to consumers.
Learn more about inflations here: https://brainly.com/question/1082634
Superman is jogging alongside the railroad tracks on the outskirts of Metropolis at 100 km/h. He overtakes the caboose of a 500-m-long freight train traveling at 50 km/h. At that moment he begins to accelerate at 10 m/s2. How far will the train have traveled before Superman passes the locomotive?
Answer:
d = 41.91 m
Explanation:
In order to calculate the distance traveled by the train while superman passes it, you write the equations of motion for both superman and train:
For train, you have a motion with constant speed. You write the equation of motion of the position of the front of the train:
[tex]x=x_o+v_1t[/tex] (1)
xo: initial position of the front of the train = 500m
v1: speed of the train = 50km/h
For superman, you take into account that the motion is an accelerated motion (you assume superman is at the origin of coordinates):
[tex]x'=v_2t+\frac{1}{2}at^2[/tex] (1)
v2: initial speed of superman = 100km/h
a: acceleration = 10m/s^2
When superman passes the train, both positions x and x' will be equal. Hence, you equal the equations (1) and (2) and you calculate the time t. But before you convert the units of the velocities v1 and v2 to m/s:
[tex]v_1=50\frac{km}{h}*\frac{1000m}{1km}*\frac{1h}{3600s}=13.88\frac{m}{s}\\\\v_2=100\frac{km}{h}=\frac{1000m}{1km}*\frac{1h}{3600s}=27.77\frac{m}{s}[/tex]
Thus, you equal x=x'
[tex]x=x'\\\\x_o+v_1t=v_2t+\frac{1}{2}at^2\\\\500m+(13.88m/s)t=(27.77m/s)t+\frac{1}{2}(10m/s^2)t^2\\\\(50\frac{m}{s^2})t^2+(13.89\frac{m}{s})t-500m=0[/tex]
You solve the last equation for t by using the quadratic formula:
[tex]t_{1,2}=\frac{-13.89\pm \sqrt{(13.89)^2-4(50)(-500)}}{2(50)}\\\\t_{1,2}=\frac{-13.89\pm 316.53}{100}\\\\t_1=3.02s\\\\t_2=-3.30s[/tex]
You only use t1 = 3.02s because negative times do not have physical meaning.
Next, you replace this value of t in the equation (1) to calculate the position of the train (for when superman just passed it):
[tex]x=500m+(13.88m/s)(3.02s)=541.91m[/tex]
x is the position of the front of the train, then, the dstance traveled by the train is:
d = 541.91m - 500m = 41.91 m
One car travels 40. meters due east in 5.0 seconds, and a second car travels 64 meters due west in 8.0 seconds. During their periods of travel, the cars definitely had the same
Answer:
They had the same speed.
Explanation:
It won't be velocity, because velocity is a vector quantity. Speed is scalar.
Velocity is the rate of change of displacement. During their periods of travel, the cars definitely had the same velocity.
What is Velocity?Velocity is the directional speed of a moving object as an indicator of its rate of change in location as perceived from a certain frame of reference and measured by a specific time standard.
Given that the first car travels 40 meters due east in 5 seconds. Therefore, we can write,
Distance = 40 meters
Time = 5 seconds
Velocity = Distance / Time = 40 meter/ 5 sec = 40 m/sec
Also, given that the second car travels 64 meters due west in 8 seconds. Therefore, we can write,
Distance = 64 meters
Time = 8 seconds
Velocity = Distance / Time = 64 meter/ 8 sec = 8 m/sec
Hence, During their periods of travel, the cars definitely had the same velocity.
Learn more about Velocity here:
https://brainly.com/question/18084516
#SPJ2
An accident in a laboratory results in a room being contaminated by a radioisotope with a half life of 4.5 hours. If the radiation is measured to be 64 times the maximum permissible level, how much time must elapse before the room is safe to enter? The mass of Helium atom is 4.002602 u (where u = 1.66 x 10-27 kg) but the mass of 1 proton is 1.00730 u and 1 neutron is 1.00869 u. Calculate the binding energy per nucleon in MeV.
Answer:
a) t = 27.00 h
b) B = 6.84 MeV/nucleon
Explanation:
a) The time can be calculated using the following equation:
[tex] R = R_{0}e^{-\lambda*t} [/tex]
Where:
R: is the radiation measured at time t
R₀: is the initial radiation
λ: is the decay constant
t: is the time
The decay constant can be calculated as follows:
[tex] t_{1/2} = \frac{ln(2)}{\lambda} [/tex]
Where:
t(1/2): is the half life = 4.5 h
[tex] \lambda = \frac{ln(2)}{t_{1/2}} = \frac{ln(2)}{4.5 h} = 0.154 h^{-1} [/tex]
We have that the radiation measured is 64 times the maximum permissible level, thus R₀ = 64R:
[tex] \frac{R}{64R} = e^{-\lambda*t} [/tex]
[tex] t = -\frac{ln(1/64)}{\lambda} = -\frac{ln(1/64)}{0.154 h^{-1}} = 27.00 h [/tex]
b) The binding energy (B) can be calculated using the following equation:
[tex]B = \frac{(Z*m_{p} + N*m_{n} - M_{A})}{A}*931.49 MeV/u[/tex]
Where:
Z: is the number of protons = 2 (for [tex]^{4}_{2}He[/tex])
[tex]m_{p}[/tex]: is the proton mass = 1.00730 u
N: is the number of neutrons = 2 (for [tex]^{4}_{2}He[/tex])
[tex]m_{n}[/tex]: is the neutron mass = 1.00869 u
[tex]M_{A}[/tex]: is the mass of the He atom = 4.002602 u
A = N + Z = 2 + 2 = 4
The binding energy of [tex]^{4}_{2}He[/tex] is:
[tex]B = \frac{(2*1.00730 + 2*1.00869 - 4.002602)}{4}*931.49 MeV/u = 7.35\cdot 10^{-3} u*931.49 MeV/u = 6.84 MeV/nucleon[/tex]
Hence, the binding energy per nucleon is 6.84 MeV.
I hope it helps you!
A ball is projected upward at time t = 0.0 s, from a point on a roof 90 m above the ground. The ball rises, then falls and strikes the ground. The initial velocity of the ball is 36.2 m/s if air resistance is negligible. The time when the ball strikes the ground is closest to
Answer:
The time when the ball strikes the ground is closest to [tex]t_t = 9.4 \ s[/tex]
Explanation:
From the question we are told that
The time of projection is t = 0.0 s
The distance of the point from the ground is [tex]d = 90 \ m[/tex]
The initial velocity of the ball is [tex]v _i = 36 .2 \ m/s[/tex]
generally the time required to reach maximum height is
[tex]t_r = \frac{g}{v}[/tex]
Where is the acceleration due to gravity with value [tex]g = 9.8 \ m/s^2[/tex]
Substituting values
[tex]t_r = \frac{36.2}{9.8}[/tex]
[tex]t_r = 3.69 s[/tex]
when returning the time and velocity at the roof level is t = 3.69 s and u = 36.2 m/s this due to the fact that air resistance is negligible
The final velocity at which it hit the ground is
[tex]v_f^2 = u^2 + 2ag[/tex]
So
[tex]v_f = \sqrt{ u^2 + 2gs}[/tex]
substituting values
[tex]v_f = \sqrt{ 3.69^2 + 2* 9.8 * 90}[/tex]
[tex]v_f = 55.45 \ m/s[/tex]
The time taken for the ball to move from the roof level to the ground is
[tex]t_g = \frac{v-u}{a}[/tex]
substituting values
[tex]t_g = \frac{55.45 -36.2}{9.8}[/tex]
[tex]t_g = 1.96 \ s[/tex]
The total time for this travel is
[tex]t_t = t_g + 2 t_r[/tex]
[tex]t_t = 1.96 + 2(3.69)[/tex]
[tex]t_t = 9.4 \ s[/tex]
A ball with a mass of 275 g is dropped from rest, hits the floor and rebounds upward. If the ball hits the floor with a speed of 3.30 m/s and rebounds with a speed of 1.60 m/s, determine the following. (a) magnitude of the change in the ball's momentum in kg · m/s (Let up be in the positive direction.)
Answer:
[tex]\Delta p=1.3475\ kg-m/s[/tex]
Explanation:
The computation of magnitude of the change in the ball's momentum in kg · m/s is shown below:-
We represent
The ball mass = m = 275 g = 0.275 kg
Thus it goes to the floor and resurfaces upward.
The ball hits the ground at 3.30 m/s speed that is
u = -3.30 m/s which represents the Negative since the ball hits the ground)
It rebounds at a speed of 1.60 m / s i.e. v = 1.60 m/s (positive as the ball rebounds upstream)
[tex]\Delta p=p_f-p_i[/tex]
[tex]\Delta p=m(v-u)[/tex]
[tex]\Delta p=0.275\ kg(1.60\ m/s-(-3.30\ m/s))[/tex]
[tex]\Delta p=1.3475\ kg-m/s[/tex]
A factory worker pushes a 30.0 kg crate a distance of 3.7 m along a level floor at constant velocity by pushing downward at an angle of 30∘ below the horizontal. The coefficient of kinetic friction between the crate and floor is 0.25.
Required:
a. What magnitude of force must the worker apply?
b. How much work is done on the crate by this force?
c. How much work is done on the crate by friction?
d. How much work is done on the crate by the normal force? By gravity?
e. What is the total work done on the crate?
Answer:
a) [tex]F = 210.803\,N[/tex], b) [tex]W_{F} = 779.971\,J[/tex], c) [tex]W_{f} = 235.683\,J[/tex], d) [tex]W_{N} = 0\,J[/tex]; [tex]W_{g} = 544.289\,J[/tex], e) [tex]W_{net} = 0\,J[/tex]
Explanation:
a) The net force exerted on the crate is:
[tex]\Sigma F = F - m\cdot g \cdot \sin \theta - \mu_{k}\cdot m\cdot g \cdot \cos \theta = 0[/tex]
The magnitud of the force that the work must apply to the crate is:
[tex]F = m\cdot g \cdot \sin \theta + \mu_{k}\cdot m\cdot g \cdot \cos \theta[/tex]
[tex]F = (30\,kg)\cdot \left(9.807\,\frac{m}{s^{2}} \right)\cdot \sin 30^{\circ} + 0.25 \cdot (30\,kg)\cdot \left(9.807\,\frac{m}{s^{2}} \right)\cdot \cos 30^{\circ}[/tex]
[tex]F = 210.803\,N[/tex]
b) The work done on the crate due to the external force is:
[tex]W_{F} = (210.803\,N)\cdot (3.7\,m)[/tex]
[tex]W_{F} = 779.971\,J[/tex]
c) The work done on the crate due to the external force is:
[tex]W_{f} = (63.698\,N)\cdot (3.7\,m)[/tex]
[tex]W_{f} = 235.683\,J[/tex]
d) The work done on the crate due the normal force is zero, since such force is perpendicular to the motion direction.
[tex]W_{N} = 0\,J[/tex]
And, the work done by gravity is:
[tex]W_{g} = (147.105\,N)\cdot (3.7\,m)[/tex]
[tex]W_{g} = 544.289\,J[/tex]
e) Lastly, the total work done is:
[tex]W_{net} = W_{F} - W_{f} - W_{g} - W_{N}[/tex]
[tex]W_{net} = 779.971\,J - 235.683\,J - 0\,N - 544.289\,J[/tex]
[tex]W_{net} = 0\,J[/tex]
Which statement BEST explains the relationship between voltage, current, and power?
A. If voltage increases and everything else remains constant, then power will increase.
B. If voltage increases and everything else remains constant, then power will decrease.
C. If current decreases and everything else remains constant, then power will increase.
D. Voltage and power are inversely related.
The Nardo ring is a circular test track for cars. It has a circumference of 12.5km. Cars travel around the track at a constant speed of 100km/h. A car starts at the easternmost point of the ring and drives for 15 minutes at this speed.
1. What distance, in km, does the car travel?
2. What is the magnitude of the car's displacement, in km, from its initial position?
3. What is the speed of the car in m/s?
Answer:
1. 25 Km
2. zero
3. 27.7 m/s
Explanation:
Data provided in the question:
Circumference of the track = 12.5 km
Speed of the car = 100 Km/h
Time for which car travels = 15 minutes = [tex]\frac {15}{60}[/tex] hr
Now,
1. Distance traveled = Speed × Time
= 100 × [tex]\frac{15}{60}[/tex]
= 25 Km
2. The distance traveled is 2 times the circumference of the track (i.e 2 × 12.5 = 25 Km)
Which means that the car is again at the initial position
Therefore, The displacement is zero.
3. Speed of car in Km/hr = 100 Km/h
now,
1 Km = 1000 m
1 hr = 3600 seconds
therefore,
100 Km/h = [tex]100\times\frac{1000}{3600}[/tex] m/s
= 27.7 m/s
Hence, the speed of car in m/s = 27.7
Calculate the potential difference across a 25-Ohm. resistor if a 0.3-A current is flowing through it.
V
Answer:7.5V
Explanation:
Ohm's law, V=IR
so, V=0.3×25
V=7.5V
Answer:
7.5 V
Explanation:
Which of the following is often found in individuals who are active and eating a healthy diet?
Answer:
Increased blood circulation to the body.
Explanation:
plato/edmentum
I really need help with this question someone plz help !
Answer:
The answer is option 2.
Explanation:
Both sides are pulling the rope with equal force where the rope doesn't move. So they have a balanced forces.
When you take your 1900-kg car out for a spin, you go around a corner of radius 56 m with a speed of 14 m/s. The coefficient of static friction between the car and the road is 0.88. Part A Assuming your car doesn't skid, what is the force exerted on it by static friction
Answer:
6,650 newtons
Explanation:
The computation of the force exerted on it by static friction is shown below:
Data provided in the question
Mass of car = m = 1,900 kg
speed = v = 14 m/s
radius = r = 56 m
Let us assume friction force be f
And, the Coefficient of friction = [tex]\mu[/tex]= 0.88
As we know that
[tex]f = \frac{mv^2}{r}[/tex]
[tex]= \frac{1,900 \times 14^2}{56}[/tex]
= 6,650 newtons
We simply applied the above formula so that the force exerted could come