Explanation:
Hydraulic systems use the pump to push hydraulic fluid through the system to create fluid power. The fluid passes through the valves and flows to the cylinder where the hydraulic energy converts back into mechanical energy. The valves help to direct the flow of the liquid and relieve pressure when needed
If the current of a circuit is 1.5 A, and the power is 24 W. what is the resistor?
Answer:
The resistor has a resistance of 10.667 ohms.
Explanation:
By Ohm's Law, voltage ([tex]V[/tex]), in volts, is directly proportional to the current ([tex]i[/tex]), in amperes, and by definition of power ([tex]\dot W[/tex]), in watts, we have the following formula:
[tex]\dot W = i^{2}\cdot R[/tex] (1)
Where [tex]R[/tex] is the resistance, in ohms.
If we know that [tex]\dot W = 24\,W[/tex] and [tex]i = 1.5\,A[/tex], then the resistance of the resistor is:
[tex]R = \frac{\dot W}{i^{2}}[/tex]
[tex]R = 10.667\,\Omega[/tex]
The resistor has a resistance of 10.667 ohms.
Match the phrase with word please help!
Phrases:
1.) The amount of work done when jerry carries a box from his house to the moving truck . He exerts a force of 35 N while carrying the box 4 meters
2.) The power resulting from 420 Nm of work being completed in 3 seconds
3.) The amount of work done when Fido carries his toy from the backyard to his crate. He exerts a force of 1.2 N over a distance of 15 m
4.) The power resulting from 120 Nm of work being completed in 20 seconds
A.) 140 joules
B.) 140 Newton-meters
C.) 6 joules
D.) 6 Newton-meters
Answer:
1-B, 2-A, 3-D, 4-C
Explanation:
1. The force exerted is, F = 35 N
Distance the box is moved, d = 4 m
So the amount of work done is, W = F x d
= 35 x 4
= 140 Newton-meters
2. Work done, W = 420 Nm
Time, T = 3 seconds
Therefore, the power required is,
[tex]$P=\frac{W}{T}$[/tex]
[tex]$P=\frac{420}{3}$[/tex]
= 140 joules
3. The force exerted is, F = 1.2 N
Distance the box is moved, d = 5 m
So the amount of work done is, W = F x d
= 1.2 x 5
= 6 Newton-meters
4. Work done, W = 120 Nm
Time, T = 20 seconds
Therefore, the power required is,
[tex]$P=\frac{W}{T}$[/tex]
[tex]$P=\frac{120}{20}$[/tex]
= 6 joules
Why might a scientist use a magnet and small strainer when investigating the physical properties of a substance?
Answer:
In order to check its magnetic properties and for removing impurities.
Explanation:
A scientist use a magnet and small strainer while investigating the physical properties of a substance in order to check the magnetic properties of the substance as well as to separate the substance from the other impurities. Magnet attract substances that is made of metals or magnetic characteristics while on the other hand, small strainer is used to separate impurities from the investigating substance so that's why the scientist use a magnet and small strainer during investigation of a substance.
A scientist use a magnet to check magnetic properties of the substance and use small strainer to separate the substance from the other impurities.
The magnet have Attractive Property , Magnet attracts ferromagnetic materials like iron, cobalt, and nickel.Magnet attract substances that is made of metals or magnetic characteristics .The small strainer is used to separate impurities from the investigating substanceLearn more:
https://brainly.com/question/2360606
When a charged particle moves along a helical path in a uniform magnetic field, which component determines the pitch of the path? the velocity component perpendicular to the magnetic field vector the velocity component parallel to the magnetic field vector the acceleration component perpendicular to the magnetic field vector the acceleration component parallel to the magnetic field vector the acceleration component radially inward the acceleration component radially outward
Answer:
the velocity component parallel to the magnetic field vector
Explanation:
When a charged particle moves in a helical path, we can decompose its velocity into two parts v_parallel and v_perpendicular to the magnetic field.
Let's analyze which component receives a force
F = q vxB
the bold letters indicate vectors, in the vector product if the two vectors are parallel the angle is zero and the sin 0 = 0 for which there is no force. therefore the velocity parallel to the field remains constant
If the two vectors are perpendicular, the angle is 90º and the sin 90 = 1, for which there is a force, which has a radial direction and consequently a centripetal acceleration that gives a circular path that does not remove the particle from the magnetic field
When checking the different answers, the correct one is: the velocity component parallel to the magnetic field vector
1. boiling point of water
water vapor
2. formed by condensation
sun
3. freezing point of water
clouds
4. gas form of water
precipitation
5. main cause of evaporation
32° F
6. rain, sleet, snow, or hail
100° C
Answer:
what is the question. . .
Answer:
see the answer above
Explanation:
A charge of +5.0 x 10-6 C is situated 0.2 meters away from another isolated charge of -3.0 x 10-6 C. What is the magnitude of the electric force that these charges exert on each other? Is this a repulsive or attractive force?
Answer:
since the charges are of different nature it's a attractive force
Explanation:
magnitude of force=
9*10^9*5*10^-6*3*10^-6/0.04
= 3.375N answer
Which best describes vibration?
0
the distance traveled per unit in time
the action of moving back and forth quickly and steadily
the distance between one compression and the compression next to it
the action of moving through a material or substance
which best describes vibration
Answer:
the distance between one compression and the compression next to it
Explanation:
Answer:
The one above this wrong.
The correct answer is b. The action of moving back and forth quickly and steadily
Explanation:
What is the height of the image? Round the answer
the nearest whole number.
Characteristic
Value
cm
What type of mirror most likely formed this image?
Focal length
13 cm
Distance of object from mirror
8 cm
Distance of image from mirror
-21 cm
Height of object
4 cm
Answer:
11 cm and concave
Explanation:
edge 2021
Answer:
it is -21, The top part is correct it is only the second part this is the first part.
Explanation:
how to spot homogeneous and heterogeneous mixtures
yo i really need help please in order to pass this i’ll give a brainliest to anyway who knows the correct answer please no links
You toss a ball straight up into the air. Assume that air resistance is negligible.
PART A. Draw a free-body diagram for the ball at three points: on the way up, at the top, and on the bottom, and on the way down. Specifically identify the forces and agents acting on the ball.
PART B. What is the ball's velocity at the very top of the motion?
PART C. What is the ball's acceleration at this point?
Answer:
the answer is B I promise
A 20 kg child is traveling 3 m/s on an amusement park ride. What is the magnitude of the child’s momentum?
Answer:
[tex]\frac{60kgm}{s}[/tex]
Explanation:
momentum = mass * velocity
= 20kg * 3m/s
= 60kgm/s
Mass of trolley (m):
(1)
0,9
kg
Mass
m xa
Acceleration
(a)
(mos)
Applied
Force (N)
0
4,04
O112
Tabulate your measurements in the table below.
At from A to B (s)
Average
Kg
At (s)
1
2
3
Hanger only
4,07 4,00
HOS
Hanger +
1 mass piece
10
3,09
3,04 3,10
3,14
Hanger +
2 mass pieces
ao
2,00
Hanger +
3 mass pieces 30
1196
1,91
Hanger +
4 mass pieces
168 1,69 1,TO 1,69
(5)
0,21
2,1 x 103 0, 098
O #4
8,8X10
2,22 2,14
0, 196
01 SS
0102
o zau
0103
01392
0/ 70
(5)
(5)
QUESTIONS AND ANALYSIS
1.
In this experiment identify the...
1.1
independent variable
(1)
1.2 dependent variable
3 E
1.3
controlled variable
Ар со
2.
3
Describe how the effect of friction was minimised in the experiment.
(1)
Use the recorded data to plot a graph that will show the relationship
between the acceleration and the applied force on the trolley. Use a (8)
graph paper.
Ilse the cranh to determine the mass of the trolley.
(4)
Answer:
ij
Explanation:
Carter is going camping outside he wants to bring a frying pan that will heat up and cool down quickly Which frying pan should carter use that will heat up and cool down the fastest
A copper
B iron
C glass
D steel
Plz help
The specific heat of the copper pan is the lowest among the other given pans. Therefore, a copper pan should carter used that will heat up and cool down the fastest. Therefore, option (A) is correct.
What is the specific heat?Specific heat of a substance can be described as the heat energy required to raise the temperature of one unit mass of a material by 1 °C. The S.I. unit of the specific heat capacity of a material is J/g°C.
The thermal capacity of a substance is a physical characteristic of a substance so it depends upon the nature of the material.
The mathematical expression of specific heat can be represented as :
Q = m×C× ΔT Where C is the specific heat.
The specific heat is an intensive characteristic of a material and does not depend upon the shape or size of the quantity.
As given the values of the specific heat of metals of the frying pans, the highest specific heat means that the pan will take more heat to increase just one-degree temperature. As copper has the lowest specific heat so it can easily heat up in comparison to other pans.
Learn more about specific heat, here:
brainly.com/question/11297584
#SPJ2
When all else remains the same, what effect would decreasing the focal length have on a convex lens?
Answer:
It would cause the lens to produce only real images. It would cause the lens to produce only virtual images. It would make the lens stronger. It would make the lens weaker.
Explanation:
quizlet
Answer:
its c
Explanation:
When an ionic compound dissolves like salt, what breaks apart from each other in the water?
Answer:
When ionic compounds dissolve in water, they break apart into the ions that make them up through a process called dissociation. When placed in water, the ions are attracted to the water molecules, each of which carries a polar charge. ... The ionic solution turns into an electrolyte, meaning it can conduct electricity.
The bonds that is present between atoms of ionic compounds break apart when it is dissolved in water.
What happen when ionic compound dissolve in water?When ionic compounds dissolve in water, the ions in the solid separate in the solution because water molecules has polar nature which attracts that ions. The hydrogen of water molecule attracts chlorine of ionic compound whereas hydroxle ion attracts sodium of ionic compound.
So we can conclude that the bonds that is present between atoms of ionic compounds break apart when it is dissolved in water.
Learn more about ionic compound here: https://brainly.com/question/2687188
A 5kg particle moving at a speed of 10m/s to the right makes an elastic collision with a wall and rebounds backward calculate the magnitude of the impulse of the body
Answer:
The magnitude of the impulse experienced by the particle is 100 kg.m/s.
Explanation:
Given;
mass of the particle, m = 5 kg
initial velocity of the particle, v₁ = 10 m/s
assuming the particle rebounds with same velocity backwards, v₂ = - 10 m/s
The impulse experienced by the particle is the change in linear momentum;
J = ΔP = mv₁ - mv₂
J = m(v₁ - v₂)
J = 5 (10 - (-10))
J = 5 (10 + 10)
J = 5(20)
J = 100 kg.m/s
Therefore, the magnitude of the impulse experienced by the particle is 100 kg.m/s.
I need help with one question on my homework. This is on the Specific Heat Capacity required practical.
Sample c has no solid residue left when evaporated. Suggest why it has a boiling point 1.7 degrees Celsius lower than distilled water.
Answer:
will mostly accord at the top of the boiling water my kind sir
Explanation:
Evaporation takes place only at the surface of a liquid, whereas boiling may occur throughout the liquid. In boiling, the change of state takes place at any point in the liquid where bubbles form. The bubbles then rise and break at the surface of the liquid.
Imagine that there is no friction for a day .Make a list if things that it would not be possible for you do.Which things would still be possible
Answer:
1. We cannot walk .
2. We will not get a grip to hold things, then we cannot eat,write,Hold pen or pencil etc.
3. Moving things cannot be stopped.
4.Buildings cannot be constructed.
5. We cannot fix a nail to the wall.
6.We cannot stand properly without a grip.
7.we would keep slipping.
8.Nothing will be steady on ground. , things will not be at a proper places because of no grip.
9.Brakes in the car / vehicles will be useless.
10. Finally all the things, including us will be floating in the air.
Explanation:
Hope that helps
Does Direction matter when you are measuring momentum
Answer:
Yes
Momentum is a vector quantity
Explanation:
A vector quantity is a quantity that has both magnitude and direction
So definitely direction matters
Answer:
no on edge 2021
Explanation:
Help please!!!!!!!!!!
Answer:
j
Explanation:
Fill in the blank with either “insulators” or “conductors” to complete the sentence. The conductivity of a material is determined by the number of free electrons. have few or no free electrons.
Answer:
Insulators is the correct answer
Explanation:
A few electrons make up the insulators, which allow for very little electrical current to flow. While the conductors are excellent electrical conductors. Rubber is a poor insulator compared to metal, which is a very good conductor.
What are insulators?The insulator is a material that consists of a few electrons and they permit very little flow of electrical current. While the conductors are very good conductors of electricity. Metal is a very good conductor while rubber is a poor insulator.
Hence the answer is conductors possess free electrons, while insulators have few free electrons
The conductor has thus been used for wiring purposes and can be effectively used made to use energy; The insulator is a poor absorber and thus are unable to transfer energy.
Learn more about insulators follow.
brainly.com/question/19755578
SPJ6
2. (a). Three forces that act on a particle are given by F1 = (20 i – 36 j + 73 k) N, F2 = (-17 i
+ 21 j – 46 k) N, and F3 = (-12 k) N. Find their resultant vector. Also find the magnitude
of the resultant to two significant figures.
(b). A vector has an x- component of -25.0 units and a y- component of 40.0 units. Find
the magnitude and direction of the vector.
How fast would a 20 kg dog have to run, to reach a momentum of 120 kg x m/s? Include unit in your answer. Worth 40 points!
Answer:
6 m/s
Explanation:
momentum= mass times velocity
120 = 20v
v = 120/20
Answer:
7
Explanation:
7
An electromagnetic wave transmits
A. Matter but not energy
B.energy but not matter
C. Both matter and energy
D. Neither energy nor matter
Answer:
B
Explanation:
I think so
Why is a spherical bob preferred to bobs of other shapes for use in simple pendulum experiments
Answer
A spherical bob creates more control for the simple pendulum experiment. An irregular bob like a large piece of paper for instance, will create too much air resistance for a basic classical experiment to yield predictable results within the academic lab.
What happened to the kelp forest when the otter was hunted to near extinction?
Answer: Sea otter is the pioneer species in the kelp forest as it regulates and controls the population of other species in the kelp forest.
Explanation:
If sea otters are hunted and their population is brought to extinction then this will cause major harm the ecosystem of the kelp forest and it will disturb the ecological balance in the kelp forest. The herbivorous animals consumed by the sea otters will increase in population and they will consume a lot of vegetation in the forest. The kelp forest which forms the coastline will not remain effective in providing protection against the storms to the neighboring areas.
Please help, I'm taking a test mlnkhjbgvfgcfgvhb
What is the motion of the particles in this kind of wave?
A) The particles will move up and down over large areas.
B) The particles will move up and down over small areas.
C) The particles will move side to side over small areas.
D) The particles will move side to side over large areas.
Answer:
I think its A
Explanation:
Not 100 percent sure tho but they do go up and down in big movements.
answer this question if an object weighs 30N on the surface of the moon. What will be its weighs on the surface of the earth
Answer:
180N
Explanation:
the gravity on Earth is six times the one on the moon
Answer:
I think 180N
Explanation:
the gravity of the surface of the earth is 6Times
more than the moon
What happens to the volume of sound as the amplitude gets larger?
How long will it take by 50W heater to melt 100g of ice at 0degreeC? Specific heat capacity of water = 4.2J/ (g0C), latent heat of fusion = 340 J/ g
Answer:
420 s
Explanation: