What is an effect of La Nina?
A.) Alaskan fish populations increase
B.) Flordia
C.) Fish populations off the coast of Peru decrease
D.) South American becomes dire than normal
Answer: D

The vector electric field is [tex]-1.73 \times 10^{4} {~}\hat{j} {~}N/C[/tex] .

A stream of charged particles, such as electrons or ions, flowing through an electrical conductor or a vacuum is known as an electric current.

One long wire carries a current I = 30.0 A to the left along the x-axis. I' = 50.0 A of current is being carried by a second lengthy wire to the right along the line (y = 0.280 m, z = 0).

Now,

The charge of a particle is q = - 2.00 μC which is moving with a velocity of [tex]v = 150\hat{i} {~}Mm/s[/tex].

At y = 0.1 m the total magnetic field is:

B = 1.16 × 10⁻⁴ T

Then the force on the particle is:

F =q(v × B)

[tex]F = (-2 \times 10^{-6} )[ ( 150 \times 10^{6})\hat{j} \times (1.16 \times 10^{-4})\hat{k} ][/tex]

F = 3.47 × 10⁻² N

A uniform electric field is applied.

Then the vector electric field will be:

F = qE

3.47 × 10⁻² = (-2 × 10⁻⁶ )E

[tex]E = -1.73 \times 10^{4}{~}\hat{j} {~}N/C[/tex]

Learn more about current here:

brainly.com/question/1100341

#SPJ4

The direction of the smallest magnetic field that enables the wire to move in this fashion to East.

A magnetic force in the direction of north that is equal in strength to the friction force will be required.

Fm - f = 0

I L B = uk mg = 0.

(1.50 x 1 x B) - (0.20 x 0.1 x 9.8) = 0

B = 0.131 T

b) the magnetic force, Fm = IL x B. (cross product )

- > north F

The formula can be used to calculate the magnetic force for a moving charge particle;

∈= Bvlsinθ

Due to the parallel motion of the wire, the angle between the magnetic field and velocity is zero degrees.

B = 0.500 T

v = 1.50 m/s

l = 0.200 m

Therefore,

∈ = (0.500 T) (1.50 m/s) * (0.200 m) *sin 0

∈=0.15 * sin 0

∈= 0

To know more wire,visit :

https://brainly.com/question/24055550

#SPJ4

Answer:فربما الى اغبر وابقاء على كل من اراد من دون اي نية لا اريد له الزواج او غيره او لا ربرلرل

الفيفي قثصشسيبزروت

Explanation:١٤٢٣٦٧٧٨٩

The distance covered is 25.9 m.

We know that the speed of sound refers to the speed with which an sound moves in an object.

Given that;

speed of sound = 345m/s

Time taken =  0.15s

We know that;

v = 2d/t

v = speed of sound

d = distance

t = time taken

vt = 2d

d = vt/2

d = 345m/s *  0.15s/2

d = 25.9 m

Learn more about speed of sound:https://brainly.com/question/15137350

#SPJ1

Answer:

D :)

Explanation:

When an impact causes the car to suddenly change its motion, (D) the people in the car will continue to move in the same direction and at the same speed as before the impact.

Newton's first law of motion states that Unless influenced by an imbalanced force, a body at rest stays at rest, and a body in motion keeps moving in a straight path at a constant pace. This law is commonly known as law of inertia and the resistance of a body to maintain its state of rest is called inertia of rest, same as, the resistance of a body to maintain its state of motion is called inertia of motion.

When a car is moving with certain speed, the car along with the people inside the car is in inertia of motion. In an event of accident, the car comes in rest in no time but the man in the car is still in inertia of motion. So, his body moves forward in the car which may cause injuries. To prevent such injuries, the people inside a car are advised to use safety belts.

So, correct answer  is option (D).

Learn more about Newton's first law of motion here:

https://brainly.com/question/974124

#SPJ2

The distance between the markers in the laboratory where the particle is produced and where it decays is 30.24m.

Radioactive decay, also known as nuclear decay, radioactivity, radioactive disintegration, or radioactive decay, is the process by which an unstable atomic nucleus loses energy through radiation. A substance that has unstable nuclei is regarded as radioactive. Alpha decay, beta decay, and gamma decay are three of the most frequent kinds of decay, and they all entail the emission of one or more particles. Beta decay is a result of the weak force, while the nuclear force and electromagnetism are in charge of the other two mechanisms. Electron capture, which occurs when an unstable nucleus seizes an inner electron from one of the electron shells, is the fourth prevalent kind of decay.

Explanation:

From the perspective of observer A, the particle had a lifetime of 112 ns and moved at a speed of 0.9c.

0.9c = 2.7e8 m/s

112 ns = 1.12e-7 s

Since we already know the time and speed from the viewpoint of observer A, we can use those to determine the distance from that viewpoint without the need for any modifications.

[tex]d=v*t=2.7e8*1.12e-7=30.24m[/tex]

To learn more about radioactive decay,visit:

https://brainly.com/question/1770619

#SPJ4

Answer: 31kg

Explanation:

(F=mxa)

Rearranged

M=f÷a

961÷31=31

Answer:

57.3N

Explanation:

Given parameters:

radius of the path = 3m

tangential speed  = 2m/s

mass of the bicycle and child  = 43kg

Unknown:

centripetal force  = ?

Solution:

The centripetal force is the inward force on a body round a circular path.

It is expressed as;

    F  = [tex]\frac{mv^{2} }{r}[/tex]  

F is the centripetal force

m is the mass

v is the tangential speed

r is the radius

        F  = [tex]\frac{43 x 2^{2} }{3}[/tex]   = 57.3N

Answer:

true

Explanation:

common sense i am just guessing.

Answer: True

Explanation: For instance cutting trees for paper.

Hope this helps!! Brainlist? Plz

Answer:

Kinetic Energy and Mechanical energy

Explanation:

The tension in the rod when the ratio of speed is 8 is 1.34 × 10⁴ N.

The longitudinal waves speed is determined using the density of the material and the Youngs modulus with the expression:

v = √(Y/rho)

A wave in a stretched string can be used to represent the transverse wave.

The length of the metal rod is 150 cm and the radius of the rod is  cm.

The mass of the rod is 50.9 g.

Now, the Youngs modulus for the material is 6.80× 10¹⁰ N/m².

For the longitudinal wave

v(l) = (Y/ρ)^{1/2}

For the transverse wave :

v(T) = (Y/μ)^{3/2}

Now, we need

v(L) / v(T) = 8

And we know,

T = (μY) / (64ρ) where μ= m /L

And the density, ρ = mass / volume = (m) / (πr²L)

Therefore,

T = (πr²Y) / 64

T =  (π)(2 × 10⁻³)² × (6.8 × 10¹⁰) / 64

T = 1.34 × 10⁴ N

Learn more about longitudinal waves here:

https://brainly.com/question/25827374

#SPJ4

Answer:

I think its D.

Explanation:

Answer:1m/s2

Explanation:

Answer:

Nuclear reactors are the heart of a nuclear power plant. They contain and control nuclear chain reactions that produce heat through a physical process called fission. That heat is used to make steam that spins a turbine to create electricity

~+lil more info!+~

What material is used to power a nuclear reactor?

uranium !

All commercial power reactors are based on nuclear fission. They generally use uranium and its product plutonium as nuclear fuel, though a thorium fuel cycle is also possible.

The magnitude of the force that one particle exerts on the other = [tex]6.8644 \times 10^{13}[/tex] N

Charge of one particle,[tex]Q_1[/tex] = -3.77  μC

Charge of the other particle,[tex]Q_2[/tex]  = 6.91 μC

The opposite signs of the charges implies the presence of force of attraction between the particles.

Given distance between particles, r = 5.84 cm = 0.0584 m

Coulomb's law states that the magnitude of the force exerted between two particles is directly proportional to the product of magnitude of charges of the particle and inversely proportional to the square of the distance between the particles.

From this we can infer the equation, [tex]F=\frac{kQ_1Q_2}{r^2}[/tex]

where F is the force between the particles and k =[tex]9\times 10^9 Nm^2C^{-2}[/tex] is the Coulomb's Constant.

So F = (9 x 10^9 x 3.77 x 6.91)/(0.0584 x 0.0584)

        = [tex]6.8644 \times 10^{13}[/tex] N

Learn more about Coulomb's law at https://brainly.com/question/1698562

#SPJ4

Answer:

[tex]\huge\boxed{\sf P.E. = 14700\ Joules}[/tex]

Explanation:

This work done is in the form of Potential Energy so we'll use the formula of Potential Energy.

Given Data:

Mass = m = 250 kg

Acceleration due to gravity = g = 9.8 m/s²

Height = h = 6 m

Required:

Work Done in the form of Potential Energy = P.E. = ?

Formula:

P.E. = mgh

Solution:

P.E. = (250)(9.8)(6)

P.E. = 14700 Joules

[tex]\rule[225]{225}{2}[/tex]

Hope this helped!

[tex]4.315 \times10^{45}[/tex] unpaired electrons,are required each with a magnetic moment of 9.27 ×10⁻²⁴A.m² , to participate .

It is given that magnetic moment of the Earth is approximately 8.00 ×10²²A.m² .

Number of unpaired is found by dividing the magnetic moment of the Earth to the given magnetic moment of 9.27 ×10⁻²⁴A.m²

   [tex]n=\frac{8.00\times10^{22}}{9.27\times10^{-24}} \\\\n=8.63\times10^{45}[/tex]

Each iron atom has two unpaired electrons, so the number of iron atoms required is [tex]\frac{1}{2}\times 8.63\times10^{45}=4.315\times10^{45}[/tex] electrons.

Learn more about magnetic moment here :

brainly.com/question/17002968

#SPJ4

Answer:

4 A

Explanation:

From the question given above, the following data were obtained:

Voltage (V) = 12 V

Resistance (R) = 3 Ω

Current (I) =?

From ohm's law,

Voltage (V) = Current (I) × Resistance (R)

V = IR

With the above formula, we can obtain the current flowing in the circuit as illustrated below:

Voltage (V) = 12 V

Resistance (R) = 3 Ω

Current (I) =?

V = IR

12 = I × 3

Divide both side by 3

I = 12/3

I = 4 A

Therefore, the current flowing in the circuit is 4 A.

Answer:

Displacement is the distance between an object’s initial position and its final position and is usually measured or defined along a straight line. Since this is a calculation that measures distance, the standard unit is the meter (m).

Explanation:

The critical adiabatic index in the presence of a solid core dynamical stability of giant planets is called adiabatic index.

In warm material science and thermodynamics, the intensity limit proportion, otherwise called the adiabatic record, the proportion of explicit warms, or Laplace's coefficient, is the proportion of the intensity limit at steady strain to warm limit at consistent volume. The Adiabatic Index adding machine processes the adiabatic list ( γ) otherwise called the intensity limit proportion or proportion of explicit warms. Accordingly, for normally happening diatomic gases at close to standard circumstances, the adiabatic file can be roughly viewed as around 7/5 or 1.4. The particular intensity proportion or adiabatic list is connected with the levels of opportunity () of a gas particle by the situation.

Learn more about adiabatic index, refer:

https://brainly.com/question/14766211

#SPJ4

Answer:

0.036J

Explanation:

Given parameters:

Spring constant , K  = 92N/m

Compression  = 2.8cm  = 0.028m

Unknown:

Potential energy  = ?

Solution:

To solve this problem;

          P.E  =[tex]\frac{1}{2}[/tex] K e²

 K is the spring constant

 e is the compression

so;

      P.E = [tex]\frac{1}{2}[/tex]  x 92 x 0.028²  = 0.036J

Answer:

When 2 objects are in contact with one another and one of them receives a positive or a negative charge, then the objects  will repel one another because they are similarly charged.

Answer:

[tex]\rightarrow[/tex] Electric motors build energy through the interaction between magnetic fields.

Magnetic fields may be generated by passing a current through a wire. Winding that wire into a coil intensifies the sector. Wrapping the coil around an iron core can intensify it more. One is going to be of the coil are North, the other South. Reverse the flow of current through the coil. The magnetic poles can swap. Place 2 separate coils close to one another and organize them therefore one turns whereas the opposite is fastened. Then build arrangements for this within the moving coil to reverse even as the opposite poles are about to line up.

Hope it helps!<3

Answer:

Radiation

Explanation:

Radiation is the transfer of heat through waves. (Fire's hot air/waves warms you)

Not conduction because you have to come in direct contact with the fire in order to be considered conduction.

Not convection because those happen when heat causes a difference in densities, allowing substances to circulate.

Answer:

the mantel

Explanation:

yeeeeaaaaaaa

The n-th place is 2×10 −4 m

The diffraction pattern's minima is

nDλ =(3−1) d

Dλ = d

2Dλ

​ d= x 3 −x

​ 2Dλ = 3×10 −3

2×0.50×6000×10 −10

=2×10 −4 m

Diffraction of light, as it is used to describe light, occurs more explicitly when a light wave passes by a corner or via an aperture or slit that is physically

Light is diffracted primarily as a function of wavelength (frequency), amplitude, and slit width. The incident waves must have a larger amplitude than the slit width for any diffraction to take place. Diffraction won't happen if the wave is less than the slit width.

The quantity of diffraction increases with the wave's wavelength. When the gap size is almost equal to the wavelength, the most 2×10 −4 m occurs.

learn more about Diffraction refer

https://brainly.com/question/11176463

#SPJ9

Answer:

An example of a hypothesis based on observation and scientific principles is:

Deaf children whose parents are deaf will acquire language faster than deaf children whose parents are not deaf.

A hypothesis is an informed prediction or a tentative statement about what you think that would occur in a scientific experiment as a result of experience from observations accepted by scientific rules and law.

A hypothesis is a testable statement obtained from the research question but questions cannot be tested directly, it is the proposed relationship between the variables that are tested.

An example of a hypothesis is:

Deaf children whose parents are deaf will acquire language faster than deaf children whose parents are not deaf.

This specifies the direction of the hypothesis because one group is faster than the other.

Explanation:

Explanation:

V=u+at

where,

v=final speed

u=initial speed,(starting speed)

a=acceleration

t=time

6=2+2a

2a=6-2

2a=4

a=4/2 = 2

a =2

2. to find time taken

v=u+at

25=5*2t

2t=25-5

2t=20

t=20/2

t=10sec

3. finding final speed

v=u+at

v=4+10*2

=4+20

v=24m/sec

5.v=u+at

=5+8*10

=5+80

V=85m/sev

6. v=u+at

8=u+4*2

8=u+8

U=8/8

u=1

these are your missing values