What is it called when particles in a solid or liquid move slower and closer together?

Answers

Answer 1
When Particles are cold they move closer together and move slower. When they’re hot it’s the opposite.
Answer 2

The reason at the time when particles in a solid or liquid move slower and closer together should be explained below.

What are particles?

The particles should be in the form of small pieces of matters. Also, the scientist believed that each and everything in the universe should be made of the particles. here the range of the particles should be in the range via the large  subatomic particles such as electrons or it has lower  microscopic particles.

Learn more about particles here: https://brainly.com/question/21526256


Related Questions

an atom's nucleus contains three protons and three neutrons what is the overall charge of the nucleus

Answers

Answer:

Positive

Explanation:

Because there is no electrons.

A box of mass 60 kg is at rest on a horizontal floor that has a static coefficient of friction of 0.6 and a kinetic coefficient of 0.25
a)The minimum force necessary to start moving the box
b) The friction force and the acceleration of the box if a horizontal force of 400 N is applied

Answers

Answer:

a) F = 353.2 N

b) [tex]F_{f} = 147.2 N [/tex]

   a = 4.21 m/s²

Explanation:

a) The minimum force necessary to start moving the box s given by:       

[tex]\Sigma F = 0[/tex]

[tex] F - \mu_{s}N = 0 [/tex]

[tex] F = \mu_{s}mg [/tex]

Where:

F: is the force applied to move the box

μs: is the static coefficient of friction = 0.6          

m: is the mass = 60 kg

g: is the gravity = 9.81 m/s²

[tex] F = 0.6*60 kg*9.81 m/s^{2} = 353.2 N [/tex]

b) The acceleration is:

[tex] F - F_{f} = ma [/tex]

[tex] F - \mu_{k}mg = ma [/tex]              

[tex] a = \frac{F - \mu_{k}mg}{m} = \frac{400 N - 0.25*60 kg*9.81 m/s^{2}}{60 kg} = 4.21 m/s^{2} [/tex]

Now, the friction force is:

[tex] F_{f} = \mu_{k}mg = 0.25*60 kg*9.81 m/s^{2} = 147.2 N [/tex]

I hope it helps you!    

A man carries a load of mass 2.6kg from one end of a uniform pole 100cm long which has a mass 0.4kg. The pole rest on his shoulder at a point 60.0cm from the load and he holds it by the other end. What vertical force must be applied by his hand and what is the force on his shoulder?

Answers

Answer:

F = 39.2 N   (hand force) and    N = 68.6 N (shoulder force)

Explanation:

In this exercise we must use the rotational and translational equilibrium conditions, we have several forces: the weight (W) of the pole applied at its geometric center, the load (w1) at one end, the shoulder support (N) 60 cm from the load and hand force (F) at the other end of the pole

Let's set the reference system at the fit point of the shoulder

     ∑ τ = 0

We will assume that the counterclockwise turns are positive

    w₁ 0.60 + W 0.1 + F₁ 0 - F 0.4 = 0

all distances are measured from the support of the man (x₀ = 0.60 m)

    F = (w₁ 0.60 + W 0.1) / 0.4

    F = (m₁ 0.6 + m 0.1) g / 0.4

let's calculate

    F = (2.6 0.6 + 0.4 0.1) 9.8 / 0.4

    F = 39.2 N

this is the force that the hand must exert to keep the system in balance

We apply the translational equilibrium condition

    -w₁ -W + N - F = 0

     N = w₁ + W + F

     N = (m₁ + m) g + F

let's calculate

     N = (2.6 + 0.4) 9.8 + 39.2

     N = 68.6 N

A roller coaster is stopped on a track. When the engineer presses a launch button on the coaster, the coaster moves forward. Explain this change in terms of balanced and unbalanced forces.

Answers

A roller coaster is stopped on a track. When the engineer presses a launch button on the coaster, the coaster moves forward. Explain this change in terms of balanced and unbalanced forces.

I need help on this question

Answers

Answer:

the 3rd one im pretty sure

Explanation:

Answer:the answer is answer 3

Explanation:

What is the average speed of a car that traveled for 192.5 miles in 3.5 hours?

Answers

Answer:

55miles per hour

Explanation:

speed=distance/time

speed=192.5miles/3.5hours

speed=55miles per hour

Answer:

55miles per hour

Explanation:

Simply divide the number you travelled with the hour you will get the answer.

describe where the information and communication technology can be used it different section?


guys help me i will make you brainliest <3​

Answers

Answer:

See below

Explanation:

ICT " Information and the communication technology" can be used in sectors like Telecommunications. ADB support for telecommunications and ICT is changing lives across the region. ...

ICT in Education. ICT can improve the efficiency and quality of education at all levels. ...

ICT in Public Sector Management. ...

ICT in Health. ...

ICT in Agriculture and Food Security.

( hope it helped <3 )

Compute the electric charge on the surface which is the portion of the cone z = 3x2 + 3y2 in the first octant that lies between the planes z = 2 and z = 6. The charge density on the surface is given by σ(x, y, z) = xyz2 coulombs per square meter.

Answers

Answer:

9828 coulombs

Explanation:

z = [tex]\sqrt{3x^2 + 3y^2}[/tex]

Relation between the cartesian and polar coordinates

x = r cos ∅

y = r sin ∅

z = [tex]\sqrt{3x^2 + 3y^2}[/tex] = [tex]\sqrt{3r}[/tex]

next we calculate the surface charge density of the cone

б ( r, ∅ ) = xyz^2 = 3r^4 sin∅ cos∅

Charge given as

Q = ∫ б(r,∅ )ds

   = ∫ б(r,∅ ) [tex]\sqrt{1 +( \frac{dz}{dx})^2 + (\frac{dz}{dx} )^2 } dA[/tex]

after integration

Q  = ∫ б(r,∅ ) 2dA

Attached below is the remaining part of the solution

Length of table is 1.0m,1.00m and 1.000m.Which one is more accurate?​

Answers

Answer:

1.00 m is a more accurate measured length.

Explanation:

Denote length of the table by L.

For L=1.0 m, there is one significant digit after the decimal.

Care 1: When one more significant digit after decimal considered, the exact number can be from 0.95 to 1.05.

So, the possible span of error [tex]\Delta E_1= 1.05-0.95= 0.1m[/tex]

For L=1.00 m, there is two significant digits after the decimal.

Case 2: When one more significant digit after decimal considered, the exact number can be from 0.095 to 1.005.

So, the possible span of error [tex]\Delta E_2= 1.005-0.095= 0.01m[/tex]

Case 3: For L=1.000 m, there is three significant digits after the decimal.

When one more significant digit after decimal considered, the exact number can be from 0.0095 to 1.0005.

So, the possible span of error [tex]\Delta E_3= 1.0005-0.0095= 0.001m[/tex]

As [tex]\Delta E_1 >\Delta E_2>\Delta E_3[/tex]

So, the least error is in the third case when L=1.00m, hence, L= 1.00m is more accurate.

Calculate the p.e. of a 5 kg mass when it is (i) 3 m, (ii) 6 m, above the ground. (g = 10 N/kg)​

Answers

Explanation:

P.E=MGH

(1) P.E=5×10(G)×3

= 150 kg m^/s^ ( ^ =sqaure)

(2) P.E=5×10×6

= 300 kg m^/s^

Hope it helps, just remember the formula u can solve any question regarding gravition of earth (P.E=Mgh)

draw a distance time graph for uniformly accelerated motion when object is an rest?​

Answers

Answer: Distance-time graph is the plot of distance travelled by a body against time.  Below is an example of a distance-time graph, if it is a straight horizontal line than the body is stationary, its speed is zero, if the line is diagonal than its moving with a constant speed and if it is anything other than a straight line then the speed is varying. Distance-Time Graph for Uniform Motion Let us now consider a distance-time graph in which the body is moving with uniform motion. A body is said to be in uniform motion when the body covers the equal distance in equal time intervals. Let’s consider a time interval of 1 second, If a body covers 10 meters in the first 1-second then it should cover 10 meters in every second from there on, this will indicate that the body is in uniform motion.

Explanation: I hoped that helped!!

A circular track has an inside cirumference of 220m. If the width of track is 3.5m, find its outer circumference.​

Answers

Answer:

Lc = 242 [m]

Explanation:

The circumference is defined as the circumference length of a circle, this length can be calculated by means of the following equation.

[tex]L_{c}=2*\pi *r[/tex]

where:

Lc = circumference length = 220 [m]

r = radius [m]

Now we can clear r

[tex]r=\frac{L_{c}}{2*\pi } \\\\r = \frac{220}{2*\pi }\\\\r = 35.01 [m][/tex]

Now we can determine the outer radius with the inner diameter plus the width of the track.

R = r + 3.5

R = 35.01 + 3.5 = 38.51 [m]

The outer circumference is:

[tex]L_{c} = 2*\pi *38.51 \\L_{c} = 242 [m][/tex]

f a substance is ionic, then it likely will

Answers

Answer:

Many ionic substances will dissolve completely in water to form an aqueous solution of cations and anions; this solution will conduct electricity.

Explanation:

Answer:

Many ionic substances will dissolve completely in water to form an aqueous solution of cations and anions; this solution will conduct electricity.

Explanation:

Why are bubbles round?

(A serious physics question)

Answers

Answer:

The Science of Round Bubbles

But once a bubble is sealed and removed from the wand, the tension in the bubble shrinks it to the smallest possible shape for the volume of air inside of it. That's a sphere, which is the familiar round shape we see when bubbles float through the air.

Explanation:

What is the final speed of an object that starts from rest and accelerates uniformly at 3.0 meters per second2 over a distance of 6.0 meters? (1) 8.0 m/s (2) 6 m/s (3) 16 m/s (4) 64 m/s

Answers

Answer:

16 m/s sir

Explanation:

because i am in collage

according to Newton's 1st law , an object without a net force ? What

Answers

Answer:

an object in motion stays in motion an object at rest stays in rest

Explanation:

The English Channel is 35 km wide at its narrowest point, which is where most swimmers attempt to cross north to south from England to France. The current across this portion of the English Channel runs at about 2 km/h east to west.

a. If a swimmer has a relative velocity to the shore of 3 km/h north to south, how long will it take her to cross the 35 km distance?

b. What must be her velocity relative to the water if she has a velocity of 3 km/h north to south relative to the shore?

Answers

Answer:

a.) 20.4 h

b.) 3.46 km/h

Explanation:

Given that an English Channel is 35 km wide at its narrowest point, which is where most swimmers attempt to cross north to south from England to France. The current across this portion of the English Channel runs at about 2 km/h east to west.

a.) If a swimmer has a relative velocity to the shore of 3 km/h north to south, The resultant velocity (Vr) will be achieved by using Pythagoras theorem  

Vr = [tex]\sqrt{2^{2} + 3^{2} }[/tex]

Vr = [tex]\sqrt{4 + 9}[/tex]

Vr = [tex]\sqrt{12}[/tex]

Vr = 3.46 m/s

To get how long it take her to cross the 35 km distance, Let us first find acceleration by using third equation of motion.

[tex]V^{2} = U^{2} + 2aS[/tex]

Where U = 0

Substitute all the parameters into the equation

[tex]3.46^{2} = 2 x a x 35[/tex]

11.97 = 70a

a = 11.97/70

a = 0.17 km/h^2

The time can be found by using equation

V = U + at

let U = 0

3.46 = 0.17t

t = 3.46/0.17

t = 20.35h

b. What must be her velocity relative to the water if she has a velocity of 3 km/h north to south relative to the shore?

her velocity relative to the water will be

Vr = [tex]\sqrt{2^{2} + 3^{2} }[/tex]

Vr = [tex]\sqrt{4 + 9}[/tex]

Vr = [tex]\sqrt{12}[/tex]

Vr = 3.46 m/s

Which choice correctly defines magnetic poles? the points on the end of magnet, where the magnetic field is strongest the point on a magnet where one magnetic field cancels out another magnetic field the middle of a magnet where the magnetic field is zero different ends of a magnet where the magnetic field is weakest

Answers

Answer:

A. The points on the end of magnet, where the magnetic field is strongest.

Explanation:

A magnet is a substance that has the ability to attract magnetic materials, e.g iron, steel etc. It comprises of two poles (north-N and south-S) each at its two ends. The N-pole and S-pole are the points on a magnet that have the strongest magnetic field. The magnetic fields originates from the north pole, and terminates in the south pole of a magnet.

When the poles of two different magnets are brought close together, attraction or repulsion may occur.

The option that defines the magnetic poles is the points on the end of the magnet, where the magnetic field is strongest.

What is a magnetic field?

Attracting other iron-containing objects or aligning themselves in a magnetic field.

There are two poles of the magnet;

1. the North Pole.

2. the South Pole.

The same poles repel each other, while the opposite poles attract each other.

Thus, the correct option is A.

To learn more about the magnet, refer to the link;

brainly.com/question/13026686

Planet X has a magnetic field with strength 0.70 G in the southern direction. When a probe is placed 50 mm east of a vertical wire it measures a field of 0.50 G in the southern direction. What would a probe read if placed 20 mm east of the vertical wire?

Answers

Answer:

0.20 G

Explanation:

The given parameters are;

The magnetic field strength of planet X = 0.70 G

The location of a probe in relation to the vertical wire = 50 m

The measurement of a probe placed 50 mm east of a vertical wire = 0.50 G

The location of the probe = 20 mm east of the vertical wire

Based on the given parameter,  the wire is a current carrying conductor with a magnetic field acting tangent to the magnetic field lines.

Given that the measured Earth magnetic field reduces, we have that the magnetic field of the wire cancels the magnetic field of the Earth

As the probe moves closer to the wire the measured magnetic field in the southern direction reduces

When the probe is placed 20 mm from the wire, the magnetic field reduces to 20/50 × 0.50 G = 0.20G

An astronaut is working outside the International Space Station where the atmospheric pressure is essentially zero. The pressure gauge on her air tank reads 690000 Pa. What force does the air inside the tank exert on the flat end of the cylindrical tank, a disk 0.150 m in diameter?

Answers

Answer:

Explanation:

Pressure = Force/Area

Given

Pressure = 690,000Pa

Area will be the area of the circular section of the cylindrical tank

Area of a circle =πd²/4

Area of a circle =π(0.15)²/4

Area of a circle = 3.14(0.0225)/4

Area of a circle = 0.07065/4

Area of a circle = 0.0176625m²

Get the force

Force = Pressure * Area

Force = 690,000* 0.0176625

Force = 12,187.125N

Hence the force applied by the air inside the tank is 12,187.125N

What is the focal length of a lens?

A.
the distance between the object and the image
B.
distance between the object and the center of the lens
C.
the distance between the center of the lens and the image
D.
the distance between the focal point and the center of the lens

Answers

Answer is D.the distance between the focal point and the center of the lens.

Answer:

it is B i took the test and got it wrong when someone said it was A

Explanation:

it is the one that says the sizing of the objects will appear unusual

Iron filings were sprinkled around these two magnets. What do the iron filings
show?
O A. They show that magnetic field lines point away from the north
pole of magnets.
B. They show the pattern made by the magnetic field lines around the
magnets
C. they show that magnetic field lines often cross over each other when magnets repel
D. they show the locations of the magnetic domains in the magnets
please help no ones questions match mine!!!

Answers

Answer:

B. They show the pattern made by the magnetic field lines around the

magnets

Explanation:

Using iron fillings, the pattern of the magnetic field lines around a bar magnet can be known.

Magnetic field lines are the line of force around a bar magnet.

These iron fillings will trace the pattern of the magnetic field around the magnet. The domains of the iron fillings begins to align and orient with that of the prevailing magnetic field around. Those areas with the strongest force will attract more fillings and those far away will attract lesser fillings.

Answer:

B

Explanation: E Z

Which statement below correctly identifies the difference between LAWS and THEORIES. LAWS describe phenomena (things happening in nature), while THEORIES explain why phenomena exist. Or LAWS are a statement of fact, while THEORIES are a statement of opinion. LAWS are based on facts, while THEORIES are based on "hunches".​

Answers

Answer: The statement that correctly identified the difference between laws and theories is

(LAWS describe phenomena (things happening in nature), while THEORIES explain why phenomena exist.)

Explanation:

LAW in the field of natural sciences is defined as a statement which describes a remarkable event( things happening in nature) after repeated close observations.

Example of law in natural science includes:

--> law of conservation of mass

--> law of conservation of energy

THEORY in the field of natural sciences is the explanation of these remarkable events after repeated observations. This helps in bringing together facts and hypothesis (ideas that can be tested with further scientific observations).

Example of theory includes:

--> kinetic theory of matter

--> Dalton's atomic theory.

Answer:

in short the answer is b

Explanation:

took nthe test

A ball is thrown horizontally at a speed of 16 m/s from the top of a cliff. If the ball hits the ground 6.0 s later, approximately how high is the cliff? 360m 240m 180m 150m

Answers

Answer:

Y = 176.4 m

Explanation:

For the height of cliff we will analyze the vertical motion. We will apply the 2nd equation of motion:

Y = V₀y*t + (0.5)gt²

where,

Y = Height = ?

V₀y = Initial Vertical Velocity = 0 m/s (since, ball is thrown horizontally)

t = time = 6 s

g = 9.8 m/s²

Therefore,

Y = (0 m/s)(6 s) + (0.5)(9.8 m/s²)(6 s)²

Y = 176.4 m

1. A pumpkin with a mass of 2 kg accelerates 2 m/s/s when an unknown force is applied to it. What is the amount of the force? ​

Answers

Answer:

The answer is 4 N

Explanation:

The force acting on an object given it's mass and acceleration can be found by using the formula

force = mass × acceleration

From the question we have

force = 2 × 2

We have the final answer as

4 N

Hope this helps you

1. Day and Night are caused by
10 points
A. The Tilt of the Earth’s Axis.
B. Earth’s Revolution around the sun
C. Earth's ellipical orbit
D. Earth's rotation on its axis.

Answers

answer : D , I know i’m correct !

40 POINTS!
A 2,200 kg SUV is traveling at 25 m/s. What is the magnitude of its momentum?
A. 55,000 kg·m/s
B. 550 kg·m/s
C. 2,200 kg·m/s
D. 88 kg·m/s

Answers

Answer:55,000 kg•m/s

Explanation:

6)Two forces are acting on 0.5-kg soccer ball.A is 230N and B is 250N.what is the acceleration of the soccer ball?​

Answers

Answer:

B)

Explanation:

What is the relationship between kinetic and potential energy in a roller coaster.

Answers

Answer:  Kinetic energy is energy that an object has as a result of its motion. Potential energy is stored energy that has not yet been released.

Explanation:  All moving objects possess kinetic energy, which is determined by the mass and speed of the object. Potential energy is the energy an object has as a result of its position.

How did Robert Whittaker change classification?

He created an organizational hierarchy.
He classified organisms as plants or animals.
He added the Phylum and Family levels.
He reorganized life into five kingdoms.

Answers

He reorganized life into five kingdoms

Answer:

d

Explanation:

Other Questions
Different plant species require different amounts of direct sunlight in order to flower. A student designed an experiment to determine the length of exposure to direct sunlight necessary for a specific plant species to produce flowers. The student collected the data below.0 hours, 0% with flowers9 hours, 0% with flowers1 hour, 0% with flowers5 hours, 90% with flowers3 hours, 80% with flowers7 hours, 10% with flowersIdentify the:independent variable- dependent variable-control group-experimental group-constant- If a sample of nitrogen gas is compressed to fit in a smaller container, what happens to thepressure, assuming the temperature remains constant? After the game....... , they decided to get something to eat. a) have finished b) has finished c) finishes d) had finished For two different air velocities, the Nusselt number for two different diameter cylinders in cross flow is the same. The average heat transfer coefficient for the smaller-diameter cylinder is:_______a. The same as that of the larger-diameter cylinder b. Larger than that of the larger-diameter cylinder c. Smaller than that of the larger-diameter cylinder There are 36 tickets sold for a raffle for the Student Art Auction, and there are two prizes to be awarded. Dionte buys two tickets, find the probability that he will win both pris(Round your answers to five decimal places.) a+b+c=88b+c=84a=2xbHelp! Plzzz helpp!!What earthquakefeature lies directlybelow the epicenter? If a reciever travels 54 yards in 9 seconds, wha is the average speed Which of the following allows a user to quickly access a frequently used computer app? Alphabetize program icons. O Create a shortcut on the toolbar. O Delete all icons on the screen. Place all icons in one folder. Graphic organizersa.Must be artisticc.Are timelines onlyb.Show relationships among informationd.Show cause and effect onlyPlease select the best answer from the choices providedHELP ME IM ON A QUIZ AND TIME IS ALMOST UP PLS Select the correct answer from each drop-down menu.What causes atoms to form covalent bonds?The number ofIn a covalent bond, two atoms are held together by the attraction betweencovalent bonds that an atom can form depends on the number ofin the atom. Which of the following classification of joints have a joint cavity?A. Fibrous jointsB. Synovial jointsC. Amphiarthroses jointsD. Cartilaginous joints Russian front ? What is the definition CAN SOMEONE HELP ME ASAPWhich text was used to support a strict interpretation of the Constitution regarding the powers allowed Congress?the Tenth AmendmentGazette of the United StatesWashington's Farewell Address"Necessary and proper" clause A study found that 8% of dog owners brush their dog's teeth. Of 25 dog owners, about how many would be expected to brush their dog's teeth? * 10 points (1) 8(2) 25(3) 2(4) 17 (1, 72), (3,66), (5, 53), (7, 40), (9, 34)WILL MARK BRAINLIEST Cole determined the equation of a linear regression line, and determined that these are the corresponding predicted v(1, 74), (3,63), (5, 52), (7, 41), (9, 30)Use the point tool to graph the residual plot for the given values in the data set. the simple formula for price elasicity of demand is Right now I have an i5 2400 and a PYN XLR8 gaming GTX 1650 Super, my CPU is too weak for 1080p gaming, what CPU should I get that has a B75 LGA 1155 socket, or Overclock it if so how many GHz should I overclock it to(I only have a stock cooler) Rachel got 18 out of 30 correct on her science test. What percent did she get on her test? Analyze the map below and answer the question that follows. A topographic map of Northwestern Russia. Areas on the map are circled and labeled 1, 2, 3, and 4. 1 is a mountain range. 2 is a flat area. 3 is a highland area. 4 is a plateau. Image by Natural Earth The region labeled with the number 1 on the map above is the __________.