what is the answer to y=1/2-x+1​

Answer:

To separate an insoluble solid from a soluble solid:  Mixing the mixture with water, filtering out the insoluble solid, and then evaporating the water to isolate the soluble solid.

Explanation:

Answer:

Yes

Explanation:

Yes, A substance can be a lewis acid without being a Bronsted-Lowery acid because there are some substances which cannot donate protons(Bronsted-Lowery acid) but can accept a pair of electron.

For Example:

Let us take the example of BF₃

BF₃ contains no proton so it is not a Bronsted Lowery Acid

However, BF₃ has an incomplete octet with 6 electrons. It needs an electron pair to complete its octet. It accepts a pair of electron to become a Lewis Acid

Answer:

Interesting question, and the answer is yes, a substance can be a Lewis acid but not a Bronsted-Lowrey acid. To see this, let’s take a look at the definitions of each.

Explanation:

Bronsted-Lowrey acid:

A compound that is a hydrogen ion (proton) donor. When dissolved in the solvent in question, these compounds lose a proton to the solution. The concentration of these protons in solution is referred to as acidity, and is measured on the pH scale.

Lewis acid:

A substance that is an electron pair receiver. In solution, free electron pairs will form bonds with the substance, either ionic or covalent. In this definition, a proton is itself an acid, rather than a part of an acid.

A key thing to note here is that, in the Bronsted-Lowrey definition, there must be a proton. That means, all Bronsted-Lowrey acids are of the form  HXn→H++Xn− , showing the dissociation in solution. However, a Lewis acid needs only to have the ability to accept an electron pair, which means that  H+  is a Lewis acid, instead of what makes a compound an acid. Additionally, that means that the number of compounds that qualify as a Lewis acid are expanded. A favorite example of mine is boron trifluoride, or  BF3 . It is a common reagent in organic synthesis, it is a Lewis acid, but does not have any hydrogen, so it cannot be a Bronsted-Lowrey acid

Answer:

The pictures to the right, show two different models of the atom. Type in the letter of your answer.

Which model best represents Dalton’s atomic theory?  

B

Which model best represents the modifications to the theory that Thomson’s results made necessary?  

A

The model that represents Dalton's atomic model is the B model.

Dalton was a scientist who described how the atom is characterized, stating that the atom would be a massive and indestructible sphere, that is, it was not divided into subparticles (electrons, protons and neutrons).

Thus, model B is the most suitable according to Dalton's statements.

Learn more about atomic theories in: brainly.com/question/13157325

Answer:

A chemical solution is defined as a homogeneous mixture of two or more substances. There are two components of chemical solution that include solute and solvent.

Solute is the component that get dissolved in another substance and solvent is the substance that dissolve solute.

For example:  carbon dioxide in water. Where carbon-dioxide is solute and water is solvent.

Answer:The elements hydrogen, nitrogen, oxygen, fluorine, chlorine, bromine and iodine are diatomic elements

Definition of diatomic elements:Diatomic elements are special as the atoms that form it do not like to be alone. That is, you will never find a nitrogen or fluorine atom, for example, hanging out solo. Rather, these atoms will always be paired together because they need to pool resources to have enough electrons.

Answer:

H2, O2, N2, F2, Cl2, Br2, I2

Explanation:

These occur naturally has molecules of 2 atoms.

They are all gases except Br2, liquid and iodine which is solid.

Answer:

Because it's not soluble in water, need to be heated acidic solution

Explanation:

Calcium Fluoride Formula: CaF2  Comprises of Ca2+ and F−

H2O = Water H+ O2- OH-

Insoluble in water

In order to dissolve a salt, you have to break apart the ions and hydrate them via a solvent.

Need to read

HSAB concept( Pearson acid-base concept) is an initialism for "hard and soft (Lewis) acids and bases"

So F- is a Halogen which is a Hard Base

And OH- is a Hard base as well

And H- is a soft base

So soft acids react best with soft bases and hard acids react best with hard bases.

Bases don't react with other bases.

Answer:

Glucose and oxygen is produced during photosyntheis

Explanation:

Carbon dioxide and water are required for photosyntheis producing oxygen and glucose

Answer:

C.Glucose and oxygen

Answer:

Pulmonary circulation moves blood between the heart and the lungs. The oxygenated blood then flows back to the heart. Systemic circulation moves blood between the heart and the rest of the body. It sends oxygenated blood out to cells and returns deoxygenated blood to the heart

Explanation:

Answer:

An insect would have an easier time walking on the surface of water than on the surface of ethanol.

Water's stronger intermolecular forces lead to higher surface tension.

Higher surface tension allows water to support the insect.

Answer:

An insect would have an easier time walking on the surface of water than on the surface of ethanol.

Water's stronger intermolecular forces lead to higher surface tension.

Higher surface tension allows water to support the insect.

Explanation:

Answer:

Alkane

Alkene

Alkyne

Explanation:

Alkane=1 bond (Saturated hydrocarbon)

Alkene= 2 bonds (Unsaturated hydrocarbon)

Alkyne= triple bonds (Unsaturated hydrocarbon)

Formula of Alkane = CnH2n+2

Formula of Alkene = CnH2n

Formula of Alkyne = CnH2n-2

Answer:

Explanation:

Magnesium when it oxidizes has a valence of 2.

Oxygen, when it mixes with something, has a valence of - 2

So Mg and O2 will form something, but what? The answer is MgO

Mg + O2 ===> MgO

To balance this equation, you need 2 Magnesiums on the right and 2 Oxygens also on the right. The left will need a  two Magnesiums.

The balanced equation will be

2Mg + O2 ====> 2MgO

Answer:

The correct option is;

4 percent ionic, 96 percent covalent, 222 pm

Explanation:

The parameters given are;

Phosphorus:

Atomic radius = 109 pm

Covalent radius = 106 pm

Ionic radius = 212 pm

Electronegativity of phosphorus = 2.19  

Selenium:

Atomic radius = 122 pm

Covalent radius = 116 pm

Ionic radius = 198 pm

Electronegativity of selenium= 2.55  

The percentage ionic character of the chemical bond between phosphorus and selenium is given by the relation;

Using Pauling's alternative electronegativity difference method, we have;

[tex]\% \, Ionic \ Character = \left [18\times (\bigtriangleup E.N.)^{1.4} \right ] \%[/tex]

Where:

Δ E.N. = Change in electronegativity = 2.55 - 2.19 = 0.36

Therefore;

[tex]\% \, Ionic \ Character = \left [18\times (0.36)^{1.4} \right ] \% = 4.3 \%[/tex]

Hence the percentage ionic character = 4.3% ≈ 4%

the percentage covalent character = (100 - 4.3)% = 95.7% ≈ 96%

The bond length for the covalent bond is found adding the covalent radii of both atoms as follows;

The bond length for the covalent bond = 106 pm + 116 pm = 222 pm.

The correct option is therefore, 4 percent ionic, 96 percent covalent, 222 pm.

Answer: Hello  mister i dont now your question

Explanation:

Answer:

The answer is protons and nuetrons

Explanation:

Answer:

Explanation:

H

[tex]empirical \: formula \\ = CaSiO3 \\ please \: see \: the \: attached \: picture \\ hope \: it \: helps[/tex]

Answer:

The pressure will increase due ot expnasion of gasses in a closed sealed tube tube .

Explanation:

Answer:

The pressure inside of a sealed tube will increase if the temperature is raised.

Explanation:

When the temperature of the gas inside the sealed tube is raised, the particles within that tube will start to become faster and faster. Because they are going faster they collide with the sides of the tube faster, therefore increasing the pressure inside the sealed tube.

Hope this helps!

Answer:

D) The attractive force decreases as the atom gets larger.

Explanation:

i did the lesson and tried all 3, all 3 times, this was the last one and only choice left so it has to be.

Answer:

The attractive force decreases as the atom gets larger.

Explanation:

Answer:

Solute

Explanation:

Answer:

first answer

Explanation:

atomic number of bromine is 35

[tex]1{s}^{2} 2 {s}^{2} 2 {p}^{6} 3 {s}^{2} 3 {p}^{6} 3 {d}^{10} 4 {s}^{2} 4 {p}^{5} [/tex]

Answer:

1s22s22p63s23p64s23d104p5

Explanation:

;)

Answer:

The answer is Observation 1 is a result of copper atoms losing two electrons.

Explanation:

The electrons result in the color change of the copper strip, causing the gray particles to join onto the metal.

Answer:

C

Explanation:

Observation 1 is a result of the copper atoms losing two electrons. It came out as the right answer.

The right response is to raise the internal gas pressure. When a sealed glass jar is heated, the temperature of the gas within rises, causing the gas molecules to travel faster and collide with the jar's walls more often and with more force, increasing the gas's pressure.

Gas molecules are made up of atoms that are linked together. These interatomic connections function similarly to springs, connecting atoms of varying masses. This connection vibrates at a constant frequency known as the natural frequency. Atoms, molecules, and/or ions are all present in gases, liquids, and solids, but their behavior varies between the three phases. The graphic below depicts the tiny differences. A gas as seen via a microscope. A gas is a condition of stuff that does not have a set volume or form. Air, water vapor, and helium are examples of gases. A gas is a kind of stuff that does not have a defined volume or shape. To put it another way, a gas takes on the shape and volume of its container.

Here,

The correct answer is Increase the internal gas pressure as When a sealed glass jar is heated, the temperature of the gas within rises, forcing the gas molecules to travel faster and hit with the jar's walls more often and with more force, raising the gas's pressure.

To know more about gas molecule,

https://brainly.com/question/29848914

#SPJ1

Answer:

Mass of a given chemical element or compound divided by the amount of substance.

(g/mol)

C.

i cant explain why..................

Answer:

2Cl- ⇒ Cl ↓2+ 2e

Explanation: sorry if this is not what you were looking for.

Answer:

It will produce 44 grams of carbon dioxide

Explanation:

Step 1: Data given

MAss of CaCO3 = 100 grams

Molar mass of CaCO3 = 100.09 g/mol

Mass of CaO produced = 56 grams

Molar mass of CaO = 56.08 g/mol

Step 2: The balanced equation

CaCO3 → CaO + CO2

Step 3: Calculate moles CaCO3

Moles CaCO3 = mass CaCO3 / molar mass CaCO3

Moles CaCO3 = 100 grams / 100.09 g/mol

Moles CaCO3 = 1.00 moles

Step 4: Calculate moles CaO

Moles CaO = 56 grams / 56.08 g/mol

Moles CaO = 1.00 moles

Step 5: Calculate moles CO2

For 1 mol CaCO3 we'll have 1 mol 1 mol CaO and 1 mol CO2

Step 6: Calculate mass CO2

Mass CO2 = moles CO2 * molar mass CO2

Mass CO2 = 1.00 moles * 44.0 g/mol

Mass CO2 = 44 grams

It will produce 44 grams of carbon dioxide

Answer: 11 Electrons

Explanation:

We know that the atomic number of sodium is 11. This tells us that sodium has 11 protons and because it is neutral it has 11 electrons.

Answer:

The sodium atom is left with a full outermost electron shell with eight electrons, and the outermost shell of the other atom is full as well.

Explanation:

The sodium atom now has a positive electrical charge of plus 1, and the other atom has a negative charge of minus 1. The two opposite charges attract, and the two atoms now form the molecule of a compound.