What mass (g) of CaCl2 are needed to make 1L of a 3M CaCl2 solution?

87.5g

100.52g

332.94g

9g

To calculate the molarity of a solution, we need to determine the number of moles of the solute (Bal2) and then divide it by the volume of the solution in liters.

Given:

Mass of Bal2 = 413 g

Volume of solution = 750 ml = 0.75 L

1. Calculate the number of moles of Bal2:

First, we need to convert the mass of Bal2 to moles using its molar mass. The molar mass of Bal2 can be calculated by summing the atomic masses of boron (B) and iodine (I):

Molar mass of Bal2 = (atomic mass of B × 1) + (atomic mass of I × 2)

Molar mass of Bal2 = (10.81 g/mol × 1) + (126.90 g/mol × 2)

Molar mass of Bal2 = 10.81 g/mol + 253.80 g/mol

Molar mass of Bal2 = 264.61 g/mol

Now we can calculate the number of moles of Bal2:

Moles of Bal2 = Mass of Bal2 / Molar mass of Bal2

Moles of Bal2 = 413 g / 264.61 g/mol

Moles of Bal2 ≈ 1.561 mol

2. Calculate the molarity of the solution:

Molarity (M) = Moles of solute / Volume of solution (in liters)

Molarity (M) = 1.561 mol / 0.75 L

Molarity (M) ≈ 2.081 M

Therefore, the molarity of the solution is approximately 2.081 M.

The molarity of the solution is approximately 1.408 M as to calculate the molarity of a solution, one must need to know the number of moles of the solute and the volume of the solution in liters.

The molar mass of BaI₂ is:

Ba (barium) atomic mass = 137.33 g/mol

I (iodine) atomic mass = 126.90 g/mol

Molar mass of  BaI₂ = (Ba atomic mass) + 2 × (I atomic mass)

= 137.33 + 2 × 126.90

= 137.33 + 253.80

= 391.13 g/mol

Given that the mass of BaI₂ is 413 g,

Number of moles = Mass / Molar mass

= 413 g / 391.13 g/mol

= 1.056 moles

Volume of solution = 750 ml = 750/1000 = 0.75 L

Finally, one can calculate the molarity of the solution using the formula:

Molarity = Number of moles / Volume of solution

= 1.056 moles / 0.75 L

= 1.408 M

Learn more about molarity here.

https://brainly.com/question/13386686

#SPJ1

Monovalent Valency, Divalent Valency and Multivalent Valency are three types of valency.

Valency refers to the combining capacity of an atom to form chemical bonds. There are three types of valency:

Monovalent: Atoms with a valency of 1 can form only one bond. Examples include hydrogen (H) and chlorine (Cl), which can each form one bond.

Divalent: Atoms with a valency of 2 can form two bonds. Oxygen (O) and calcium (Ca) are examples of divalent atoms.

Multivalent: Atoms with multiple valencies can form different numbers of bonds. Transition metals such as iron (Fe) and copper (Cu) exhibit multivalency, allowing them to form varying numbers of bonds, depending on the specific compound and oxidation state.

Learn more about valency, here:

https://brainly.com/question/31847414

#SPJ1

The number of particles of copper produced when 3.85 grams of Copper (II) Chloride is consumed is approximately [tex]1.728 * 10^2^2[/tex] particles.

To determine the number of particles of copper produced when 3.85 grams of Copper (II) Chloride is consumed with excess aluminum, we need to use stoichiometry and the balanced chemical equation for the reaction.

The balanced chemical equation for the reaction between Copper (II) Chloride (CuCl2) and aluminum (Al) is:

[tex]3CuCl_2 + 2Al[/tex] -> [tex]2AlCl_3 + 3Cu[/tex]

From the balanced equation, we can see that for every 3 moles of[tex]CuCl_2[/tex]consumed, 3 moles of Cu are produced.

First, we need to calculate the number of moles of [tex]CuCl_2[/tex] in 3.85 grams. To do this, we divide the mass of[tex]CuCl_2[/tex] by its molar mass. The molar mass of [tex]CuCl_2[/tex] can be calculated by summing the atomic masses of its constituent elements: Cu (63.55 g/mol) and Cl (35.45 g/mol).

Molar mass of[tex]CuCl_2[/tex] = 63.55 g/mol (Cu) + (2 * 35.45 g/mol) (Cl) = 134.45 g/mol

Number of moles of CuCl2 = 3.85 g / 134.45 g/mol ≈ 0.0287 mol

Since the stoichiometry of the reaction states that 3 moles of CuCl2 produce 3 moles of Cu, we can conclude that 0.0287 mol of CuCl2 will produce 0.0287 mol of Cu.

Finally, to calculate the number of particles (atoms or molecules) of copper produced, we multiply the number of moles of Cu by Avogadro's number, which is approximately [tex]6.022 * 10^2^3[/tex]particles/mol.

Number of particles of Cu = 0.0287 mol * [tex]6.022 * 10^2^3[/tex] particles/mol

Therefore, the number of particles of copper produced when 3.85 grams of Copper (II) Chloride is consumed is approximately [tex]1.728 * 10^2^2[/tex]particles.

Know more about  copper   here:

https://brainly.com/question/24856041

#SPJ8

Answer:

3rf or 5d cd Yu been successful of a new future

The name of the branched alkane shown below is 2- methylheptane that is in option D as alkane is a type of hydrocarbon, which is a compound consisting of hydrogen and carbon atoms only. 

Alkanes are characterized by having single bonds between carbon atoms and being saturated hydrocarbons, meaning they have the maximum number of hydrogen atoms bonded to each carbon atom. Alkanes are often referred to as "paraffins" and serve as the simplest and most basic form of hydrocarbons. They are relatively unreactive and are commonly found in petroleum and natural gas. The systematic names for alkanes are derived from the prefix "n-" or "normal-," followed by the Greek numerical prefix indicating the number of carbon atoms. For example, "n-pentane" refers to the straight-chain alkane with five carbon atoms.

Learn more about alkanes here

https://brainly.com/question/24270289

#SPJ1

Answer:

Basically, they r different chemically and radically.

Explanation:

Here is how:

So,

Magnesium compounds found in surface water can vary depending on the specific water source and environmental factors. However, some common magnesium compounds that can be present in surface water include:

Magnesium Carbonate (MgCO3): This compound can form when magnesium ions (Mg2+) react with carbonate ions (CO32-) present in the water. It is often found in areas where there are limestone or dolomite formations.

Magnesium Hydroxide (Mg(OH)2): This compound can occur when magnesium ions react with hydroxide ions (OH-) in the water. It is more likely to be present in alkaline or basic water conditions.

Magnesium Sulfate (MgSO4): This compound can form when magnesium ions react with sulfate ions (SO42-) in the water. It can be found in areas where there are sulfates present, such as in some mining or industrial areas.

Now, let's compare these magnesium compounds to minerals like calcium carbonate and soluble sugar in lemonade:

Calcium Carbonate (CaCO3): Calcium carbonate is a common mineral found in many natural sources, including limestone, chalk, and shells of marine organisms. It is insoluble in water and tends to precipitate out of the solution, forming solid deposits or scale.

Soluble Sugar in Lemonade: Lemonade typically contains sucrose or other soluble sugars. These sugars are highly soluble in water, meaning they readily dissolve and form a homogeneous mixture with water.

In comparison to magnesium compounds found in surface water, calcium carbonate and soluble sugar in lemonade are chemically different. Calcium carbonate is insoluble in water and tends to separate from the solution, while soluble sugars dissolve completely.

Answer:

First, let's consider the ratio: 1:25. This means that for every 1 gram of solute, we have 25 milliliters of solvent. Therefore, if we have 100 milliliters of the solution, we can set up a proportion to find the amount of solute in grams:

1 gram solute / 25 milliliters solvent = x grams solute / 100 milliliters solution

Cross-multiplying, we get:

25 * x = 1 * 100

25x = 100

x = 100 / 25

x = 4

So, in 100 milliliters of a 1:25 (weight/volume) solution, there are 4 grams of solute.

To calculate the percent strength, we divide the mass of the solute (4 grams) by the volume of the solution (100 milliliters) and multiply by 100:

Percent strength = (mass of solute / volume of solution) * 100

Percent strength = (4 g / 100 mL) * 100

Percent strength = 4%

Therefore, the percent strength of a 1:25 (weight/volume) solution is 4%.

An atom has 17 protons and 17 electrons. The atom's charge is neutral. The positive charge of the 17 protons in this atom is balanced by the negative charge of the 17 electrons.

The ratio of an atom's protons, which have a positive charge, to its electrons, which have a negative charge, determines the charge of the atom. The quantity of protons in an electrically neutral atom is equal to the quantity of electrons.

The positive charge of the 17 protons in this atom is balanced by the negative charge of the 17 electrons, since there are 17 protons and 17 electrons in it. Consequently, the atom is electrically neutral or has a net charge of zero.

Learn more about protons, here:

https://brainly.com/question/18489557

#SPJ1

The following chemical equations must be balanced:

1. N2 + 3 H2 → 2 NH3

Type: Synthesis

2. 2 KClO3 → 2 KCl + 3 O2

Type: Single Replacement

3. 2 NaF + ZnCl2 → ZnF2 + 2 NaCl

Type- Decomposition

4. 2 AlBr3 + 3 Ca(OH)2 → Al2(OH)6 + 6 CaBr2

Type- Double Replacement

5. 2 H2 + O2 → 2 H2O

Type: Combustion

6. 2 AgNO3 + MgCl2 → 2 AgCl + Mg(NO3)2

Type: Synthesis

7. 2 Al + 6 HCl → 2 AlCl3 + 3 H2

Type: Decomposition

8. C3H8 + 5 O2 → 3 CO2 + 4 H2O

Type: Combustion

9. 2 FeCl3 + 6 NaOH → Fe2O3 + 6 NaCl + 3 H2O

Type: Double Replacement

10. 4 P + 5 O2 → 2 P2O5

Type: Synthesis

11. 2 Na + 2 H2O → 2 NaOH + H2

Type: Single Replacement

12. 2 Ag2O → 4 Ag + O2

Type: Decomposition

13. C6H12O6 + 6 O2 → 6 CO2 + 6 H2O

Type: Combustion

14. 2 KBr + MgCl2 → 2 KCl + MgBr2

Type: Double Replacement

15. 2 HNO3 + Ba(OH)2 → Ba(NO3)2 + 2 H2O

Type: Double Replacement

16. C5H12 + 8 O2 → 5 CO2 + 6 H2O

Type: Combustion

17. 4 Al + 3 O2 → 2 Al2O3

Type: Synthesis

18. Fe2O3 + 2 Al → 2 Fe + Al2O3

Type: Single Replacement

Learn more about Chemical reactions, here:

https://brainly.com/question/29039149

#SPJ1

From the uncompleted equation, we have:

LiOH + HBr ->

Since we have two ionic substance reacting, we can conclude that the type of reaction is double displacement reaction as the reaction will involve exchange of ions between the reacting species.

The products of the reaction can be obtained by balancing the equation. This is shown below:

LiOH + HBr ->

By exchange of ion, we have

LiOH + HBr -> LiBr + H₂O

Now, observing the equation, we can see that the equation is balanced.

Thus, the products of the reaction are LiBr and H₂O

Learn more about balancing equation:

https://brainly.com/question/12192253

#SPJ1

The solubility of the salts is affected by the temperature changes. 1. NaCl is least affected by temperature. 2. supersaturated. 3. 60 grams KBr. 4. Ethanol has both polar and non-polar groups. 5. Mixing and shaking.

A KBr solution with 90 gm solute in 100 grams of water at 50 degrees is classified as supersaturated. 60 grams of KBr are needed to make a saturated solution in 100 gm of water at 30 degrees.

Ethanol is a general solvent due to the presence of both the polar and the non-Polar groups. As a result, it is easier to dissolve both polar molecules and non-Polar molecules. The dissolving rate can be increased by mixing or shaking the solution. Also, the sugar dissolves faster in hot than cold tea.

To learn more about the solubility, refer to the link:

https://brainly.com/question/31493083

#SPJ1

Answer:

Sodium (Na) is a highly reactive metal, while sodium chloride (NaCl) is a compound formed by the combination of sodium and chlorine (Cl). Sodium exists as a pure element, whereas sodium chloride is a stable, crystalline compound.

Sodium is a soft, silvery-white metal that is highly reactive and can easily react with water or air. In contrast, sodium chloride is a white crystalline solid that is highly stable and does not react readily with water or air. Sodium chloride is commonly known as table salt and is widely used as a seasoning and food preservative.

7.54 *[tex]10^8[/tex] meters is  75.4 nanometers.

To convert 7.54 *  [tex]10^8[/tex] meters to nanometers, you can multiply the value by [tex]10^9[/tex]

as,  [tex]10^9[/tex]nanometers = 1  meter.

7.54 * [tex]10^8[/tex] m * [tex]10^9[/tex] =  7.54 x [tex]10^1[/tex] nm

Therefore, 7.54 *[tex]10^8[/tex] meters is equal to 75.4 nanometers.

learn more about conversion:

https://brainly.com/question/13076223

To convert 7.54 x 10^-8 meters to nanometers, you multiply 7.54 x 10^-8 by 1 x 10^9 to get 75.4 nanometers.

To convert meters to nanometers, you need to know that 1 meter is equivalent to 1 x 109 nanometers. Therefore, if you were to convert 7.54 x 10-8 m to nanometers, you would multiply 7.54 x 10-8 by 1 x 109.

Here's how you'd do it: 7.54 x 10-8 m * 1 x 109 nm/m = 75.4 nm. So, 7.54 x 10-8 meters is equivalent to 75.4 nanometers.

https://brainly.com/question/32030244

#SPJ2

The name of LiBr is lithium bromate and the charge of the cation (K) is +.

A cation is a positively charged ion, i.e. one that would be attracted to the cathode in electrolysis. The opposite of a cation is an anion.

Cations and anions make up an ionic compound and determine the charge on the compound. For example, an ionic compound; Lithium bromate is given in this question.

Lithium bromate is made up of Lithium (Li+) as the cation and chlorine (Cl-) as the anion.

Learn more about cations at: https://brainly.com/question/1626694

#SPJ1

The 5 moles of water is equal to 90.075 grams of water and 220 J of energy is equal to 52.636 calories.

To change moles of water to grams, it is required to find the molar mass of the substance. The molar mass of water (H2O) is equal to 18.015 grams/mol.

To change 5 moles of water to grams, by using the following calculation:

5 moles × 18.015 grams/mol = 90.075 grams of water

Thus, 5 moles of water is equal to 90.075 grams of water.

To change joules to calories,  by using the conversion factor:

1 cal = 4.184 J.

To change 220 J of energy to calories, by using the following calculation:

220 J ×  (1 cal / 4.184 J) = 52.636 cal

Thus, 220 J of energy is equal to 52.636 calories.

Learn more about water, here:

https://brainly.com/question/29285510

#SPJ1

The molarity of the 750 ml solution of BaI₂ was calculated to be 0.787 M.

413 grams of BaI₂corresponds to 1.05 moles and 750 ml of water corresponds to 0.75 liters of water. So the molarity of the solution is calculated as

1.05* 0.75= 0.787 moles.

24) Thus the molarity of the solution is 0.787 M.

25) P₂O₇ is a covalent compound. Both phosphorous and oxygen have similar electronegativity.

SnBr₂ is ionic as the electronegativity difference between the two is less.

Fe(OH)₂ is an ionic compound.

Cl₃O₈ is a covalent compound.

26) (NH₄)₂CO₃ is highly soluble in water while Fe(OH)₂ is insoluble in water. CaOH is poorly soluble in water while PbCl₂is only sparingly soluble in water.

27) In the given reaction FeS is formed as the precipitate and it is highly insoluble in water while the KCl is dissolved in the aqueous solution.

In the second reaction, ZnCl₂ is soluble as a part of the aqueous solution while strontium sulfate forms the precipitate.

28) In salt water salt is the solute and water is the solvent.

29) Air pressure is lower in a higher atmosphere. The pressure is 0.65 atm and the temperature is -15 degrees at the altitude where the balloon has risen. As the balloon rises, the external pressure decreases and the balloon volume increases. However, the internal pressure or ballon volume remains the same.

30) With an increase in the temperature of a substance, the kinetic energy of the substance increases too.

31) With an increase in the pressure, volume decreases while with a pressure decreases volume increases.

32) If the temperature of a gas increases the pressure also increases.

33) When the plunger is pushed in, the air pressure increases. This pushes the bubbles out and reduces the size of the marshmallow. When the plunger is pushed out, the air pressure decreases, causing the marshmallow to expand.

To learn more about molarity, refer to the link:

https://brainly.com/question/2817451

#SPJ1

The sample containing 7.1 × 10^19 molecules of H2O corresponds to approximately 1.18 × 10^(-4) moles of H2O.

To determine the number of moles of H2O in a sample containing 7.1 × 10^19 molecules, we need to use Avogadro's number, which states that 1 mole of any substance contains 6.022 × 10^23 molecules.

Given that there are 7.1 × 10^19 molecules of H2O in the sample, we can calculate the number of moles using the following formula:

Moles = Number of molecules / Avogadro's number

Moles = 7.1 × 10^19 / 6.022 × 10^23

Moles ≈ 1.18 × 10^(-4) moles

For more such questions on molecules

https://brainly.com/question/24191825

#SPJ8

[tex]\Large \textsf{$\boxed{\boxed{\rm (NH_4)_2CO_3}}$}[/tex]

When working with percentage compositions, we can say, "let the mass of the compound be 100 grams."

[tex]\large \textsf{$\therefore$ There is 29.15 g of nitrogen, 8.41 g of hydrogen, 12.50 g of carbon, }\\ \large \textsf{\ \ \ and 49.9 g of oxygen in 100 g of compound.}[/tex]

The empirical formula of a compound is its formula in which the constituent elements are in the simplest mole ratio.

To find the number of moles of each element (denoted by symbol [tex]\textsf{$n$}[/tex]), we can divide the mass of each element (in grams, denoted by symbol [tex]\large \textsf{$m$}[/tex]), by the molar mass of each element (in g/mol, denoted by symbol [tex]\textsf{$M$}[/tex]), which can be found on an international standard IUPAC Periodic Table.

[tex]\Large \textsf{$\therefore \rm number\ of\ moles=\frac{mass\ present}{molar\ mass}$}[/tex]

[tex]\Large \textsf{$\implies \boxed{n= \frac{m}{M}}$}[/tex]

Now we can apply this to the above masses of each element:

[tex]\large \textsf{$n(\rm N) = \frac{29.15}{14.01}$}\\\\\large \textsf{$\phantom{n(\rm N)}=2.0807\ \rm mol$}\\\large \textsf{$n(\rm H) = \frac{8.41}{1.008}$}\\\\\large \textsf{$\phantom{n(\rm H)}=8.3433\ \rm mol$}\\\\\large \textsf{$n(\rm C) = \frac{12.50}{12.01}$}\\\\\large \textsf{$\phantom{n(\rm C)}=1.0408\ \rm mol$}\\\\\large \textsf{$n(\rm O) = \frac{49.9}{16.00}$}\\\\\large \textsf{$\phantom{n(\rm O)}=3.1188\ \rm mol$}\\[/tex]

[tex]\large \text{$\therefore $ the ratio of N : H : C : O}\\\\ \large \text{$\Rightarrow$2.0807 : 8.3433 : 1.0408 : 3.1188}[/tex]

Simplifying this ratio by dividing all parts by 2.0807:

[tex]\large \text{$\therefore$ 1 : 4.0098 : 0.5002 : 1.4989}\\\\\large \text{$\implies$ 1 : 4 : 0.5 : 1.5}[/tex]

Since the mole ratio is displayed in integers, multiply this result by 2:

[tex]\large \text{$\therefore$ 2 : 8 : 1 : 3 is the final mole ratio.}\\\\\\ \large \text{$\boxed{\boxed{\implies \rm N_2H_8CO_3$ or $\rm (NH_4)_2CO_3}}$}[/tex]

Note: the compound found, is a common ionic compound known as ammonium carbonate.

To learn more about the empirical formula:

https://brainly.com/question/14044066

The limiting reagent is chlorine and the correct option is option 2.

In a chemical reaction, the limiting reagent is the reactant that determines the quantity of the products that are produced. Limiting reagents are defined as the substances which are entirely consumed in the completion of a chemical reaction and so a limiting reagent limits the formation of products and determines the amount of products obtained in the reaction.

The limiting reagent can be identified from the number of moles in the reaction, the one that is having the lesser number of moles acts as a limiting reagent in the reaction.

Given,

Moles of hydrogen = 5.3 moles

Moles of chlorine = 4.8 moles

Limiting reagent is the one that has lesser number of moles and thus chlorine is the limiting reagent in this reaction.

Thus, the ideal selection is option 2.

Learn more about Limiting reagent, here:

https://brainly.com/question/31171741

#SPJ1

Answer:

a. P2O7 - This is a covalent compound. P and O have similar electronegativities and they form a covalent bond between them, rather than an ionic bond.

b. SnBr2 - This is a covalent compound. Sn and Br have different electronegativities, but they still form a covalent bond due to their relatively small difference in electronegativity.

c. Fe(OH)2 - This is an ionic compound. Fe has a higher electronegativity than O and H, so it tends to donate its electrons and become positively charged. This results in the formation of ionic bonds between Fe and OH.

d. Cl3O8 - This is a covalent compound. Cl and O have similar electronegativities, so they form covalent bonds rather than ionic bonds.

The Statement 3 (the products have more potential energy than the reactants in an exothermic reaction) is partially correct because the products do have lower potential energy than the reactants in an exothermic reaction.

The correct statement regarding endothermic and exothermic reactions is:

Energy is absorbed in an endothermic reaction.

In an endothermic reaction, energy is taken in from the surroundings, usually in the form of heat. The reactants have a lower energy level than the products, so energy must be absorbed to reach the higher energy state of the products. This energy absorption causes a decrease in the temperature of the surroundings, making the reaction feel cold.

On the other hand, in an exothermic reaction, energy is released. The reactants have a higher energy level than the products, so energy is released during the reaction, usually in the form of heat. This energy release causes an increase in the temperature of the surroundings, making the reaction feel warm or hot.

Therefore, statement 2 (energy is released in an endothermic reaction) and statement 4 (the products have more potential energy than the reactant in an endothermic reaction) are incorrect.

For more such questions on energy

https://brainly.com/question/5650115

#SPJ8

The volume the gas will occupy at pressure of 138.7 KPa, given that the temperature remains the same is 136 mL

The new volume of the gas, given that the new pressure is 138.7 KPa can be obtained as follow:

P₁V₁ = P₂V₂

Inputting the given parameters, we have:

135.5 × 139.3 = 138.7 × V₂

18875.17 = 138.7 × V₂

Divide both side by 138.7

V₂ = 18875.17 / 138.7

V₂ = 136 mL

Thus, we can conclude that the volume of the gas will be 136 mL

Learn more about volume:

https://brainly.com/question/14560487

#SPJ1

The conjugate acid-base pairs in the reaction between ammonia and hydrofluoric acid in aqueous solution are NH3/NH4+ and HF/F-.

In the reaction between ammonia (NH3) and hydrofluoric acid (HF) in aqueous solution, the following conjugate acid-base pairs can be identified:

NH3 (ammonia) and NH4+ (ammonium ion):

Ammonia (NH3) acts as a base by accepting a proton (H+) from hydrofluoric acid (HF) to form the ammonium ion (NH4+). In this reaction, ammonia acts as a Lewis base by donating an electron pair to the proton, resulting in the formation of the ammonium ion as the conjugate acid.

HF (hydrofluoric acid) and F- (fluoride ion):

Hydrofluoric acid (HF) acts as an acid by donating a proton (H+) to ammonia (NH3) to form the fluoride ion (F-).

In this reaction, hydrofluoric acid acts as a Lewis acid by accepting an electron pair from ammonia, resulting in the formation of the fluoride ion as the conjugate base.

To summarize, in the reaction NH3 (aq) + HF (aq) = NH4+ (aq) + F- (aq), the conjugate acid-base pairs are NH3/NH4+ and HF/F-. Ammonia (NH3) is the base that forms its conjugate acid, the ammonium ion (NH4+), while hydrofluoric acid (HF) is the acid that forms its conjugate base, the fluoride ion (F-).

It is important to note that in an aqueous solution, ammonia is present as NH3 molecules, and hydrofluoric acid dissociates into H+ and F- ions. The resulting ammonium ion (NH4+) and fluoride ion (F-) remain in the solution.

For more question on aqueous visit:

https://brainly.com/question/19587902

#SPJ8

Approximately 12.27 grams mass of AgCl will be produced from 5g of NaCl and 103g of AgNO₃.

Given information,

Mass of NaCl = 5g

Mass of AgNO₃ = 103g

The number of moles of NaCl and AgNO₃:

Molar mass of NaCl = 22.99 + 35.45 = 58.44 g/mol

Number of moles of NaCl = 5.00/ 58.44 = 0.0856 mol

Molar mass of AgNO₃ = 107.87 + 14.01 ) + 3 × 16.00 = 169.87 g/mol

Number of moles of AgNO₃ = 103 / 169.87 = 0.606 mol

The stoichiometry of the balanced chemical equation between NaCl and AgNO₃:  AgNO₃ + NaCl → AgCl + NaNO₃

1 mole of AgNO₃ reacts with one mole of NaCl to produce one mole of AgCl.

For NaCl: Moles of AgCl produced from NaCl = 0.0856 mol

For AgNO₃: Moles of AgCl produced from AgNO₃ = 0.606 mol

Since NaCl produces fewer moles of AgCl, it is the limiting reactant.

Molar mass of AgCl = 107.87 + 35.45 = 143.32 g/mol

Mass of AgCl produced from NaCl = 0.0856 × 143.32 ≈ 12.27 g

Learn more about mass, here:

https://brainly.com/question/26789700

#SPJ1

The energy required to cause the rise in temperature of 75g of water is 10345.5J.

Specific heat is a physical property of a substance that quantifies the amount of heat energy required to raise the temperature of a unit mass of the substance by one degree Celsius (or one Kelvin).

Given information,

Mass (m) = 75g

Specific heat (c) = 4.18 J/g°C

Change in temperature (Δt) = 37°C - 4°C = 33°C

The formula that can be used to determine the energy is, Energy (Q) = m × c × Δt

Q = 75 × 4.18 × 33

Q = 10345.5J

Therefore, the energy needed to cause the rise in temperature of 75.0 g of water from 4.0°C to 37°C is 10345.5J.

Learn more about energy, here:

https://brainly.com/question/28238395

#SPJ1

Answer:

The limiting reactant is BF3 because there is less of it than Li2SO4.

Explanation:

Different gases effuse at different rates due to the relationship between their molecular masses, average velocities, and kinetic energy.

Lighter gases have higher average velocities and effuse more rapidly, while heavier gases have lower average velocities and effuse at slower rates. Graham's law of effusion provides a quantitative explanation for this phenomenon.

Different gases effuse at different rates due to variations in their molecular masses and average velocities. Effusion is the process by which gas molecules escape through a small opening or porous barrier into a vacuum or a region of lower pressure.

According to Graham's law of effusion, the rate of effusion of a gas is inversely proportional to the square root of its molar mass. Mathematically, it can be expressed as:

Rate A / Rate B = √(Molar mass B / Molar mass A)

This means that lighter gas molecules, with lower molar masses, effuse faster compared to heavier gas molecules. The reason behind this can be understood by considering the kinetic theory of gases.

Gas molecules are in constant random motion, colliding with each other and the walls of the container. The average velocity of gas molecules is directly related to their kinetic energy, which depends on their mass and temperature. Lighter gas molecules have higher average velocities due to their lower mass and therefore higher kinetic energy.

During effusion, gas molecules near the opening of the container collide with the walls more frequently and possess higher velocities. Lighter gas molecules have a higher chance of having a velocity that exceeds the escape velocity threshold, allowing them to effuse more easily.

On the other hand, heavier gas molecules have lower average velocities and collide less frequently with the walls. They require more energy or higher velocities to overcome intermolecular forces and effuse through the opening.

In summary, different gases effuse at different rates due to the relationship between their molecular masses, average velocities, and kinetic energy. Lighter gases have higher average velocities and effuse more rapidly, while heavier gases have lower average velocities and effuse at slower rates. Graham's law of effusion provides a quantitative explanation for this phenomenon.

For more such question on gases visit

https://brainly.com/question/25736513

#SPJ8