Answer:
1. Unbalanced Force (If you increase force, the acceleration will increase)
2. Mass of Body (If you increase mass, the acceleration will decrease)
Explanation:
According to Newton's Second Law the acceleration produced in a body depends upon two variables. The law states that:
“When an unbalanced force is applied on a body then an acceleration is produced in it, in its own direction”
The magnitude of produced acceleration is directly proportional to the applied force and inversely proportional to the mass of body. Mathematically,
a α F
and, a α 1/m
where,
a = acceleration
F = Unbalanced Force
m = Mass of Body
So, the acceleration increases when the unbalanced force increase and vice versa.
And the acceleration decreases when the mass of body increase and vice versa.
combining above equations:
a α F/m
a = (Constant)F/m
here,
Constant = 1
therefore,
F = ma
A tow truck is pulling 25,000 kg van with a tow hook that meets the van at an angle of 30° with the ground. How much force must the tow trucl use to pull the van with an initial acceleration of 3m/s2...!?
Answer:
86605.08 N
Explanation:
The equation to calculate the force is:
Force = mass * acceleration
The force and the acceleration does not have the same direction in this case, so we need to decompose the force into its horizontal component, which is the force that will generate the horizontal acceleration:
Force_x = Force * cos(30)
Then, we have that:
Force_x = mass * acceleration
Force * cos(30) = 25000 * 3
Force * 0.866 = 75000
Force = 75000 / 0.866 = 86605.08 N
Please explain it’s in the photo
Answer:
Since air resistance actually stops vehicles and goes in a vector opposite to the direction of the vehicle and slows it down. Vehicles would want to make vehicles aerodynamic. Many cars bump into air molecules therefore making air resistance. Aerodynamic cars will lesser the allowance of bumping into said molecules. Thats why cars like to cut down on air resistance
Air resistance is friction.
-- Friction steals kinetic energy.
-- A car gets kinetic energy by burning gasoline, and uses the kinetic energy to get where it needs to go.
-- If anything steals the car's kinetic energy, then the car has to burn more gasoline to get where it needs to go.
-- Gasoline costs money.
-- Anything that steals a car's kinetic energy costs you more money to operate the car.
(Another thing that takes kinetic energy away from the car is the car's brakes. The driver uses the brakes when he WANTS to slow down or stop, so it's not stealing, but it still costs kinetic energy and money.)
a 50.0kg bicyclist on a 10.0kg bicycle speeds up from a 5.00m/s to 10.0m/s
Answer:
The total kinetic energy before accelerating = 750 JThe total kinetic energy after accelerating = 3,000 JTotal work done = 2,250 JExplanation:
Given:
Mass of bicyclist = 50 kg
Mass of bicycle = 10 kg
Initial velocity (u) = 5 m/s
Final velocity (v) = 10 m/s
Find:
(a) What was the total kinetic energy before accelerating = ?
(b) What was the total kinetic energy after accelerating = ?
(c) How much work was done to increase the kinetic energy of the bicyclist = ?
Computation:
Total mass (M) = 50 kg + 10 kg = 60 kg
1. The total kinetic energy before accelerating = 1/2[Mu²]
The total kinetic energy before accelerating = 0.5[(60)(5)²]
The total kinetic energy before accelerating = 750 J
2. The total kinetic energy after accelerating = 1/2[Mv²]
The total kinetic energy after accelerating = 0.5[(60)(10)²]
The total kinetic energy after accelerating = 3,000 J
3. Total work done = Δ K.E
Total work done = 3,000 J - 750 J
Total work done = 2,250 J
A helium ion of mass 4m and charge 2e is accelerated from rest through a potential difference V in vacuum. Its final speed will be
Answer:
Final Velocity = √(eV/m)
Explanation:
The Workdone, W, in accelerating a charge, 2e, through a potential difference, V is given as a product of the charge and the potential difference
W = (2e) × V = 2eV
And this work is equal to change in kinetic energy
W = Δ(kinetic energy) = ΔK.E
But since the charge starts from rest, initial velocity = 0 and initial kinetic energy = 0
ΔK.E = ½ × (mass) × (final velocity)²
(Velocity)² = (2×ΔK.E)/(mass)
Velocity = √[(2×ΔK.E)/(mass)]
ΔK.E = W = 2eV
mass = 4m
Final Velocity = √[(2×W)/(4m)]
Final Velocity = √[(2×2eV)/4m]
Final Velocity = √(4eV/4m)
Final Velocity = √(eV/m)
Hope this Helps!!!
state two factors that affect the turning effect of force
Answer:The first is the magnitude of the force applied on the body and the second is the perpendicular distance from the line of action of force and the axis of rotation of the body.
Explanation:
50 COINS AMAZING PLEASE HELP ME!!!
Answer:
ok
Explanation:
Ok
Which force does not operate at a distance of 1 m?
A. Weak nuclear
O B. Electric
C. Gravitational
D. Magnetic
Answer:
A
Explanation:
which refers to a transfer of thermal energy between two objects?
A. potential energy
B. kinetic energy
C. heat
D. temperature
How much power is used by 4 A appliance that is plugged into a 120 V circuit for 4 minutes
Answer:
Power, P = 480 W
Explanation:
It is required to find the power used by 4 A appliance that is plugged into a 120 V circuit for 4 minutes. Power used by an appliance is given by the formula as follows :
[tex]P=VI[/tex]
Plugging all the values we get :
[tex]P=120\times 4\\\\P=480\ W[/tex]
So, the power used by the appliance is 480 W.
1. How many digits does the frog have on each of its forelegs and how many on each of its
hind legs?
Answer:
A frog has four digits on its fore legs
A frog has five digits on its hind legs
Explanation:
Biologically, digits refer to the fingers and toes of animals (mostly vertebrates).
A frog is known to have only four digits on its fore limbs (which are not webbed). They usually use this for steering themselves in the water.
A frog also has five digits on each of its hind legs. These are webbed, and are used for swimming in water.
Isaac throws an apple straight down from a tree with an initial speed of 5.0 \dfrac{\text m}{\text s}5.0 s m 5, point, 0, start fraction, start text, m, end text, divided by, start text, s, end text, end fraction. It hits the ground with a final speed of 12 \dfrac{\text m}{\text s}12 s m 12, start fraction, start text, m, end text, divided by, start text, s, end text, end fraction. How many seconds did the apple fall?
Answer:
0.71s
Explanation:
From Newton's law of motion ;
V =U +gt
V is the final velocity or speed
U is the initial velocity or speed
g is acceleration of free fall due to gravity given as 9.8m/S2
Note when a body moves horizontally down its said to do so with the aid of the force of gravity
Hence the final velocity is aided by gravity.
From the above formula;
t =V-U/ g
t= 12-5/ 9.8 = 0.71s
Answer: .71
Explanation:
Khan academy
Describe The energy conversions that occur when coal is formed, and then burned to produce thermal energy.
Answer:
When energy contained in coal is turned into heat, and then into electrical energy. As boiling water heated by the burning coal is cooled, steam forges from these cone-shaped cooling towers.
A non-uniform rod 60cm long and weighs 32N is balanced at the 45cm mark. A load of 2N is hung on the zinc rod at the 25cm mark. Where must a second knife-edge be placed to balance the zinc rod horizontally
Answer:
The second knife-edge must be placed 46.2 cm from the zero mark of the rod.
Explanation:
From the law of equilibrium, ΣF = 0 and ΣM = 0.
Let R be the reaction at the knife edge. Since the weight of the rod and zinc load act downward, and we take downward position as negative
-32 N - 2 N + R = 0
-34 N = -R
R = 34 N
Also, let us assume the knife-edge is x cm from the zero mark. Taking moments about the weight and assuming the knife-edge is right of the weight of the rod. Taking clockwise moments as positive and anti-clockwise moments as negative,
-(45 - 25)2 + (x - 45)R = 0
-(20)2 + (x - 45)34 = 0
-40 = -(x - 45)34
x - 45 = 40/34
x - 45 = 1.18
x = 45 + 1.18
x = 46.18 cm
x ≅ 46.2 cm
The second knife-edge must be placed 46.2 cm from the zero mark of the rod.
Which statement best describes the long-term effects of using renewable resources?
A) There is an unlimited supply of fresh water on the Earth.
B) Melting glacier ice will supple more fresh water.
C) As populations decrease, renewable resources will also decrease.
D) As demand for renewable energy increase, fossil fuel use will decrease.
Answer:
The answer is D) As demand for renewable energy increase, fossil fuel use will decrease.
Explanation:
I just took the exam
The statement that best describes the long-term effects of using renewable resources is as follows:
As demand for renewable energy increases, fossil fuel use will decrease.Thus, the correct option for this question is D.
What is meant by Renewable resources?Renewable resources may be defined as those resources that cannot be exhausted and are capable in order to furnish a continuous source of clean energy. Examples include hydropower, geothermal power, wind energy, solar energy, etc.
The dependency on renewable resources reduces the demand for non-renewable resources like the combustion of fossil fuels that emit highly toxic constituents in the environment which are extremely harmful to living entities.
Therefore, as demand for renewable energy increases, fossil fuel use will decrease is the statement that best describes the long-term effects of using renewable resources. Thus, the correct option for this question is D.
To learn more about Renewable resources, refer to the link:
https://brainly.com/question/79953
#SPJ2
Un gas se encuentra a una presión constante y a una temperatura de 30°C. Si la temperatura aumenta a 45°C, su presión varía a 6 atm. ¿Cuál era la presión inicial del gas? Transforma los °C en °K.
Answer:
P1 = 5.76 atm
Explanation:
To find the initial pressure of the gas you use the equation for ideal gases, for both temperatures and pressures:
[tex]P_1V=nRT_1\\\\P_2V=nRT_2\\\\[/tex]
T1: initial temperature = 30°C = 303.15K
T2: final temperature = 45°C = 318.15K
P1: initial pressure = ?
P2: final pressure = 6atm
n: number of moles
R: ideal gas constant
The number of moles and R are constant, you can dive the first equation into the second and solve for P1:
[tex]\frac{P_1V}{P_2V}=\frac{nRT_1}{nRT_2}\\\\\frac{P_1}{P_2}=\frac{T_1}{T_2}[/tex]
[tex]P_1=\frac{T_1P_2}{T_2}[/tex]
Finally, you replace the values of T1, P2 and T2:
[tex]P_1=\frac{(303.15K)(6atm)}{318.15K}=5.71atm[/tex]
hence, the initial pressure of the gas was 5.71 atm
state the principle of conservation of energy
Answer:
Principal of Conservation of Energy states that " Energy is neither created nor destroyed. However, It is just converted to other forms of energy"
A 4.0 kg block is initially at rest on a frictionless, horizontal surface. The block is moved 8.0 m by the application of a constant 10.0 N horizontal force. If the block slides into a fixed horizontal spring and comes to rest when the spring is compressed a distance of x=0.25m. Determine the spring constant of the fixed horizontal spring. Show all formula with substitutions and units.
Answer:
k = 2560 N/m
Explanation:
To find the spring constant, you take into account that all the kinetic energy of the block becomes elastic potential energy in the spring, when the block compressed totally the spring:
[tex]K=U\\\\\frac{1}{2}mv^2=\frac{1}{2}kx^2[/tex]
m: mass of the block = 4.0kg
v: velocity of the block just before it hits the spring
x: compression of the spring = 0.25m
k: spring constant = ?
You solve the previous equation for k:
[tex]k=\frac{mv^2}{x^2}[/tex] (1)
Then, you have to calculate the velocity v of the block. First, you calculate the acceleration of the block by using the second Newton law:
[tex]F=ma[/tex]
F: force over the block = 10.0N
a: acceleration
[tex]a=\frac{F}{m}=\frac{10.0N}{4.0kg}=2.5\frac{m}{s^2}[/tex]
With this value of a you can calculate the final velocity after teh block has traveled a distance of 8.0m:
[tex]v^2=v_o^2+2ad[/tex]
vo: initial velocity = 0m/s
d: distance = 8.0m
[tex]v=\sqrt{2ad}=\sqrt{2(2.5m/s^2)(8.0m)}=6.32\frac{m}{s}[/tex]
Now, you can calculate the spring constant by using the equation (1):
[tex]k=\frac{mv^2}{x^2}=\frac{(4.0kg)(6.32m/s)^2}{(0.25m)^2}=2560\frac{N}{m}[/tex]
hence, the spring constant is 2560 N/m
A train takes 6 hours to reach Indore from Delhi. If it moves with the speed of 70 km/h, find the distance between Indore and Delhi.
Answer:
Distance = 420 km
Explanation:
Speed = Distance/ Time
Where speed = 70 km/hr and time = 6 hours
Distance = Speed × Time
D = 70 km/hr × 6 hrs
D = 420 km
Answer:
GIVEN DATA :
TIME TAKEN=t=6h
SPEED OF THE TRAIN=v=70km/h
TO FIND:
DISTANCE COVERED=d=?
SOLUTION:
AS WE KNOW THAT
SPEED=DISTANCE COVERED / TIME TAKEN
SPEED × TIME TAKEN = DISTANCE COVERED
70km/h×6h=distance covered
distance covered=420km
what is brightness. help asap
Answer:
The subjective visual sensation related to the intensity of light emanating from a surface or from a point source.
A remote controlled plane accelerates to a velocity of 21.0 m/s while covering a distance of 87.4 m in 6.11 s. What was the plane's initial velocity?
Answer:
7.61 m/s
Explanation:
Given:
Δx = 87.4 m
v = 21.0 m/s
t = 6.11 s
Find: v₀
Δx = ½ (v + v₀) t
87.4 m = ½ (21.0 m/s + v₀) (6.11 s)
v₀ = 7.61 m/s
71.6
Δx = 87.4 m
v = 21.0 m/s
t = 6.11 s
Find: v₀
Δx = ½ (v + v₀) t
87.4 m = ½ (21.0 m/s + v₀) (6.11 s)
v₀ = 7.61 m/s
HELLO ONCE MORE FRIENDS . PLEASE HELP ME.
Q.18) In the figure below, Force (F) of 2000 N is acting on the piston A and a bus is on the piston B. If the area of piston A is 50 cm2 and the area of piston B is 4000 cm2
a)Find the pressure produce of the piston B . (3 marks)
b)Find the weight of the bus on the poston B. ( 3 marks)
c)Calculate the mass of the bus. ( 3 marks)
Answer:
Do u want to talk?
Explanation:
Answer:
You found answer yet?
Explanation:
An astronaut is moving in space when a big explosion occurs about 50 meters behind him. How will the astronaut come to know about the explosion?
Choose:--
From the sound of the explosion
From the light due to the explosion
From light and sound due to the explosion
From the vibrations due to the explosion
Answer:
The correct answer is B.
The astronaut will know due to the light from the explosion.
Explanation:
Sound and vibrations require a medium such as air to travel through. Space, there is no air. Only a vacuum. So sound and vibrations are unable to travel. Light requires no medium to travel. It can go through a vacuum.
Therefore the Astronaut will see a bright flash of light as it travels from the explosion to outer space. It is also important to note that light can travel very far because nothing else interacts with its wave particles and as such, it cannot be impeded.
Cheers!
A car starts from rest and attains a velocity of 30m/s in 5 sec . calculate the total distance travel by that car and acceleration
Answer:
Acceleration (a) = 6 m/s²
Total distance travel by car(s) = 75 meter
Explanation:
Given:
Initial velocity (u) = 0
Final velocity (v) = 30 m/s
Time (t) = 5 sec
Find:
Total distance travel by car(s) = ?
Acceleration (a) = ?
Computation:
v = u +at
30 = 0 + a(5)
30 = a(5)
Acceleration (a) = 6 m/s²
Total distance travel by car(s) = ut +1/2(a)(t)²
Total distance travel by car(s) = 1/2(a)(t)²
Total distance travel by car(s) = (0.5)(6)(5)²
Total distance travel by car(s) = 75 meter
What is the most likely reason why these early flowers gradually changed to many different types of flowers over time?
Answer:
The flowers adapted to environmental conditions.
Explanation:
!! i will mark as brainliest so pls answer quick !!
The student becomes negatively charged because of the friction between her socks and the carpet.
Explain why the friction causes the student to become charged
Answer:
A student becomes negatively charged because of the friction between his socks and the carpet. ... The electrons get rubbed and move towards the carpet so the carpets electrons move away and the student becomes negatively charged.
Q1: A step-up transformer has 80 turns on its primary coil and 1200 turns on its secondary coil. The
primary circuit is supplied with an alternating current at 120 V.
a) What voltage is being applied across the secondary circuit?
b) The current in the secondary circuit is 2.0 A. What current is in the primary circuit?
c) What are the power input and output of the transformer?
Answer:
a. 1.8 kV b. 30 A c. power input = 3.6 kW, power output = 3.6 kW
Explanation:
a. Since turns ratio N₁/N₂ = V₁/V₂ where N₁ = number of turns of primary coil = 80 turns, N₂ = number of turns of secondary coil = 1200 turns, V₁ = voltage in primary circuit = 120 V and V₂ = voltage in secondary circuit = unknown
So, V₂ = N₂V₁/N₁
= 1200 × 120 V/80
= 1800 V
= 1.8 kV
b. Also, N₁/N₂ = I₂/I₁ where I₁ = current in primary circuit = unknown and I₂ = current in secondary circuit = 2.0 A
So, I₁ = N₂I₂/N₁
= 1200 × 2.0 A/80
= 30 A
c. The power input of the transformer P₁ = I₁V₁
= 30 A × 120 V
= 3600 W
= 3.6 kW
The power output of the transformer P₂ = I₂V₂
= 2 A × 1800 V
= 3600 W
= 3.6 kW
a) The voltage applied across the secondary circuit is 1.8 kV
b) The current in the primary circuit is 30 A
c) The power input and output of the transformer are 3.6 kW and 3.6 kW.
What is transformer?A transformer transfers electric energy from one AC circuit to one or more other circuits, either stepping up or stepping down the voltage.
a) Turns ratio N₁/N₂ = V₁/V₂ where N₁ = number of turns of primary coil = 80 turns, N₂ = number of turns of secondary coil = 1200 turns, V₁ = voltage in primary circuit = 120 V
Substitute the values and we get the voltage in secondary circuit is
V₂ = N₂V₁/N₁
V₂ = 1200 × 120 V/80
V₂ = 1800 V
V₂ = 1.8 kV
Thus, the voltage applied across the secondary circuit is 1.8 kV
b) Turn ratio also represented as N₁/N₂ = I₂/I₁ where I₂ is the current in secondary circuit = 2.0 A
Put the values, we have current in primary circuit is
I₁ = N₂I₂/N₁
I₁ = 1200 × 2.0 A/80
I₁ = 30 A
Thus, the current in the primary circuit is 30 A
c) The power input of the transformer P₁ = I₁V₁
P₁ = 30 A × 120 V
P₁ = 3600 W
P₁ = 3.6 kW
The power output of the transformer P₂ = I₂V₂
P₂= 2 A × 1800 V
P₂= 3600 W
P₂= 3.6 kW
The power input and output of the transformer are 3.6 kW and 3.6 kW.
Learn more about transformer.
https://brainly.com/question/15200241
#SPJ5
A force of 210 N is applied to an object and the object accelerates at 14m/s2. Determine the mass of the object in kg.
Answer:
15 kg
Explanation:
F = m*a
F/a = m
210/14 = 15 kg
In which space, outdoors or in your classroom, would it be easier to hear a musician? Explain
Answer:
It is easier to hear a musician in the classroom than outdoors
Explanation:
It is easier to hear a musician in the classroom due to the improved acoustics provided by the walls of the classroom whereby along with the direct sound of the musician, which is the lead source of the sounds, there is an increased number of indirect sound reaching the ear in the classroom than outdoors and due to precedence effect, all the sound appear to come from the musician
In music played outside, along side the direct sound from the musician, the indirect sound that reach the ear is echoed from maybe by only the ground while the majority of the sound from the music wanders away with the wind and in other directions as well as being absorbed such that speakers will be required to improve the sound of the music outdoors.
What is the effect of gravity on a falling object?
Answer:
When objects fall to the ground, gravity causes them to accelerate.
Solar energy is a form of
energy from the Sun.
OA) heat
OB) nuclear
OC) mechanical
OD) electromagnetic
Answer:
Solar energy is a form of Electromagnetic energy
Explanation:
Solar energy is constantly flowing away from the sun and throughout the solar system. Solar energy warms the Earth, causes wind and weather, and sustains plant and animal life. The energy, heat, and light from the sun flow away in the form of electromagnetic radiation (EMR