What volume (liters) of aqueous 0.325 M nitric acid is required to react completely with 3.68 g barium hydroxide?

The components have very precise measurements to ensure that the cleaning agent has the right properties which means it is an example of a homogeneous mixture.

A mixture is referred to as a substance which comprises of two or more different chemical substances which are not chemically bonded and are of two types which are:

The homogeneous mixture is a type of mixture in which there is the same or uniform proportions of its components in the sample while heterogeneous mixture doesn't have a uniform proportion.

In this scenario, we were told that the components have very precise measurements with the right properties which depicts a homogeneous mixture and is the correct choice.

Read more about Homogeneous mixture here https://brainly.com/question/9799840

#SPJ1

Answer: 120 mph or 2 mpm

Explanation: 60/5= 12

12*10=120mph

Going 10 miles in 5 minutes means you would be able to go 20 miles in 10 minutes. You would have a total of 12 five minute blocks at 10 miles each. 60 miles in 30 minutes or 120 in 60 minutes.

Or 10 miles in 5 minutes would be 2 miles in 1 minute. (10/5=2)

Answer:

85.384 atm or 64608.13086 mmHg

Explanation:

PV= NRT

P= NRT/V

n= mols

R= gas constant (i used .0821 for atm)

T= Temp in Kelvins (Celsius degrees + 273)

V= in L

(65molsx480kx.0821)/30L

The empirical formula of oxide of iron is Fe2O2 and its name is iron oxide.

Given:

Solution:

Now, calculate the relative mass of iron in iron oxide = Percentage of iron by mass / At. mass of iron

Relative mass of iron = 77.75/55.85 = 1.39

Relative mass of oxygen = Percentage of oxygen by mass / At. mass of iron = 22.25/16 = 1.39

Now the calculate the molar ratio of iron to oxygen = 1.39 : 1.39 = 2:2

Thus, the empirical formula of iron oxide is Fe2O2 and its name is iron oxide.

If you need to learn more about empirical formula click here:

https://brainly.com/question/13058832

#SPJ4

Answer:

A

Explanation:

Answer:

1s2 2s2 2p6 3s2 3p6 3d2 4s2

Explanation:

"A solution of 5 M HCl is already made. You need to dilute the solution to 1 M HCl. The 1 M HCl solution is less concentrated." Thus, option b is correct.

Molar concentration has been the molarity of the solution that measures the amount of the solute present in the liter solution. It describes the solute concentration that depends on the volume.

The dilution of the solution by increasing the volume results in a decrease in the concentration as molarity and volume show an inverse relationship. So, 1 M is less concentrated than 5 M solution.

Therefore, option b. less concentrated is the correct blank.

Learn more about molar concentration, here:

https://brainly.com/question/21841645

#SPJ4

Your question is incomplete, but most probably your full question was, A solution of 5 M HCl is already made. You need to dilute the solution to 1 M HCl. The 1 M HCl solution is ____________.

a. more concentrated

b. less concentrated

c. neither

d. both less and more concentrated

Answer:

its the fourth one please mark as brainlest

Explanation:

Answer:

b

Explanation:

i took the test edg2021

Answer:

b.

it is a warm air mass over a continent

Explanation:

The mass of FeS formed : 11.97 g

Reaction

Fe(s) + S(s) → FeS(s)

mass Fe=7.62 g

mol Fe(MW=56 g/mol) :

[tex]\tt mol=\dfrac{mass}{MW}\\\\mol=\dfrac{7.62}{56}\\\\mol=0.136[/tex]

mass S=8.67 g

mol S(MW=32 g/mol) :

[tex]\tt mol=\dfrac{8.67}{32}=0.271[/tex]

Limiting reactant : smaller ratio(mol:coefficient) ⇒coefficient=1

Fe : S =0.136 : 0.271⇒Fe limiting(smaller), S excess

Mol FeS based on Fe , so mol FeS=0.136

Mass FeS(MW=88 g/mol) :

[tex]\tt mass=mol\times MW\\\\mass=0.136\times 88=11.97~g[/tex]

Answer:

2.78 moles of water are produced.

Explanation:

Given data:

Number of moles of H₂O produced = ?

Number of moles of oxygen react = 3.25 mol

Solution:

Chemical equation:

2C₂H₆ + 7O₂       →     4CO₂ + 6H₂O

Now we will compare the moles of water with oxygen.

                O₂          :          H₂O

                 7            :           6

               3.25        :           6/7×3.25 = 2.78 mol

Density is defined as the mass divided by volume.

Density is also known by the name of viscosity.

Density is denoted by D.

It's unit is basically denoted by kg/m^3.

The density of the block is 0.42 g/cm^3.

The formula of the density is, Density = mass (m) / volume (v)

Now, it is given in the word problem that,

Mass of pine wood = 27g

Volume = 4^3 = 64 cm^3

Thus, Density = 27 g /64 cm^3 = 0.42 g/cm^3.

Hence, the density of the block of pine would be 0.42 g/cm^3

To know more about Density here :

https://brainly.com/question/15164682?referrer=searchResults

#SPJ1

Answer:

The phenotypic percentage of having yellow or green seeds is 50% for having either of the two colours

Explanation:

The crossing to determine the offsprings is shown in the image attached where we have two green (Yy) seeds and two yellow (yy) seeds as offsprings.

Thus, the phenotypic percentage of having yellow or green seeds is 50% for having either of the two colours.

Note, the dominant allele is "Y" while the recessive allele is "y". Thus, Yy would produce a yellow colour while yy would produce a green colour (as both mentioned in the question).

Also note that phenotype describes the outward properties/characteristics of an individual.

Answer:

option d

Explanation:

please mark me brainliest

Answer: S₅Br₆

Explanation: The prefix “penta-“ means five, and the prefix “hexa-“ means six.

Answer:

Low mass star phases

Explanation:

Helium fuses into carbon, the core of the star collapses. Once this happens, the outer layers become exhausted from the weight and this leads a planetary nebula to be formed from the outer layers. The core of the star remains a white dwarf for some time, but eventually it cools down and evolves to a black dwarf.

Answer:

9.85

Explanation:

M1V1 =M2V2

6.20×v1= 0.470×0.130

v1 = ( 0.470 × 0.130 ) ÷ 6.20

v1 = 0.0098 L × 1000

V1 = 9.8 ml

Answer:

is a

Explanation: A, because the oceanic plate and continental plate are pushed up together

Location A, because the lighter oceanic plate will be pushed under the continental plate

Answer:

is a

Explanation:



Answer:

location A

Explanation:

Plates Subduct When an ocean plate collides with another ocean plate or with a plate carrying continents, one plate will bend and slide under the other. This process is called subduction. A deep ocean trench forms at this subduction boundary.

plus location B doesn't seem to have 2 plates colliding to cause subduction in the first place.

your welcome

N-methyl-2-pyrrolidone is a very reactive compound. It reacts in an acidic medium to form a variety of products. Some reactions involve the ring-opening step.

The structure of N-methyl-2-pyrrolidone is given below:

The compound has a five-membered ring, which consists of four carbon atoms and one nitrogen atom. The ring has one oxygen attached to it via the double bond, and one methyl group is attached to the nitrogen atom.

The chemical reaction involved is as follows:

The structure of the product is given below:

N-methyl-2-pyrrolidone on reaction with strong aqueous acidic medium followed by the treatment of heat results in the opening of the ring and forms a compound having a carboxylic group at one end and protonated nitrogen atom which has one methyl group attached to it, at another end

Learn more about compounds here:

https://brainly.com/question/13516179

#SPJ4

Answer: 40 days

Explanation: The substance completely disintegrates in 20 days the substance completely disintegrates in 40 days 1/8 part of the mass of the substance will be left intact at the end of 40 days.

Answer:

b

Explanation:

Earth's atmosphere is composed of multiple layers of gases surrounding earth. So the correct option is B.

The atmosphere of Earth extends from the planet's surface up to 10,000 kilometres (6,214 miles) above. Following that, the atmosphere disappears into space. Although there is disagreement among scientists on the location of the atmosphere's upper border, most of them can agree that the atmosphere's majority is found near the planet's surface, up to a distance of around eight to fifteen kilometres (five to nine miles).

While most life on Earth requires oxygen, oxygen does not make up the bulk of the planet's atmosphere. About 78% of the gases in the Earth's atmosphere are nitrogen, 21% are oxygen, 0.9 % are argon, and 0.1 % are other gases. The remaining 0.1 per cent of gases includes trace quantities of neon, water vapour, methane, carbon dioxide, and methane.

Based on temperature, the atmosphere is separated into five distinct strata. The troposphere, which is located between five and ten miles (or seven and 15 kilometres) above Earth's surface, is the layer that is closest to the surface. The troposphere is significantly thinner near the North and South Poles than it is at the equator. The troposphere, which makes up between 75 and 80 per cent of the total atmosphere, is where the majority of its mass is located.

Therefore the correct option is B.

Read more about the atmosphere, here

https://brainly.com/question/13958926

#SPJ2

Answer:

λ  =0.93×10⁻⁶ m

Explanation:

Given data:

Wavelength of wave = ?

Frequency = 3.23 ×10¹⁴ s⁻¹

Solution:

Formula:

Speed of wave = frequency × wavelength

speed of wave = 3×10⁸ m/s

by putting values,

3×10⁸ m/s = 3.23 ×10¹⁴ s⁻¹ × λ

λ  = 3×10⁸ m/s  /  3.23 ×10¹⁴ s⁻¹

λ  =0.93×10⁻⁶ m

Answer:

A 1.69%

i hope its right i worked it out

If an ice cube is melting, its shape and state of matter changes from solid to liquid, while its chemical composition remains the same. Hence, it is a physical change.

When an ice cube melts, only the physical property of the ice cube changes. No new substances are formed, and the chemical composition of the ice does not change, making it a physical change.

A physical change occurs only the physical properties of the substance like colour, shape, density and solubility changes. It is easily reversible. The melted ice can easily be re-frozen back to its solid state. Also, the melting process does not produce any new chemical substance.

Learn more about physical changes here:

https://brainly.com/question/17931044

#SPJ4

Answer:

the hydrogen end

Explanation:

In H - F molecules there is a charge separation. Hydrogen has partial positive charge on them and Fluorine has a partial negative charge on it.

Halogen-fluorine,chlorine,bromine,iodine

Group II A- Beryllium,magnesium,calcium,strontium ,barium ,radium

Non-reactive- Helium,neon,argon,krypton,xenon,radon

Alkali metal-lithium ,sodium,potassium,rubidium,caesium,francium.

It is a representation of chemical elements in a tabular format.It is a graphical representation of modern periodic law which states that the properties of elements are a periodic function of their atomic numbers.

The periodic table is divided into 4 blocks, rows of the table are called periods and columns are known as groups. Elements belonging to the same group show same properties.

First periodic table  developed and accepted was by Russian chemist Dmitri Mendeleev in 1869.He formulated the periodic law as properties of the elements are a periodic function of their atomic masses.

Till date 118 elements have been discovered and all have been successfully placed in the periodic table based on their properties.

Learn more about  periodic table here:

https://brainly.com/question/7373020

#SPJ1

Answer:

Use the periodic table to choose the element that matches each description.halogen: 

✔ iodine✔ magnesium

✔ argon ✔ potassium

Answer:

Mass = 17.8 g

Explanation:

Given data:

Number of atoms of Ca = 2.68 × 10²³

Mass in gram = ?

Solution:

Avogadro number:

The given problem will solve by using Avogadro number.

It is the number of atoms , ions and molecules in one gram atom of element, one gram molecules of compound and one gram ions of a substance.

The number 6.022 × 10²³ is called Avogadro number.

1 mole = 6.022 × 10²³ atoms

2.68 × 10²³ atoms × 1 mole  /6.022 × 10²³ atoms

0.445 mol

Mass in gram;

Mass = number of moles ×  molar mass

Mass = 0.445 mol  ×  40 g/mol

Mass = 17.8 g

Answer: pic

Explanation:

plz

Answer:

4. matter is neither created nor destroyed

Explanation:

The Law of Conservation of Mass dates from Antoine Lavoisier's 1789 discovery that mass is neither created nor destroyed in chemical reactions. In other words, the mass of any one element at the beginning of a reaction will equal the mass of that element at the end of the reaction.