Which of the following choices is the one that does NOT describe a chemical
property?
Concentrated hydrochloric acid will burn a hole in cotton jeans because the acid
breaks down the cellulose fibers in cotton.
Copper metal combines with substances in the air to form a green "patina" that
protects the copper from further reaction.
Copper compounds often form beautiful blue crystals when a solution of a given
copper compound is evaporated slowly.
Oven cleaners contain sodium hydroxide, which converts the grease/oil spatters
inside the oven to water-soluble materials, which can be washed away.
Hydrogen peroxide fizzes when it is applied to a cut or scrape.

A certain protein was found to contain 0.793% zinc by mass. The minimum molecular mass of the protein is 8264.46 grams.

Molecular mass is the sum of the all atoms of an element. The molecular mass can be calculated by checking the mass of the atom from the periodic table.

In 100 grams of proteins, we have, 0.793% zinc

The molar mass of zinc is 65.3820 g/mol

0.793 / 65.3820 = 0.0121 moles of zinc

So, in 100 grams of protein

1 mole = 100 / 0.0121 = 8264.46 grams / mol

Thus, the minimum molecular mass of the protein is 8264.46 grams.

To learn more about molecular mass, refer to the link:

https://brainly.com/question/18446366

#SPJ1

Answer:

Earth formed in this manner about 4.54 billion years ago (with an uncertainty of 1%) and was largely completed within 10–20 million years. The solar wind of the newly formed T Tauri star cleared out most of the material in the disk that had not already condensed into larger bodies

Explanation:

Earth formed in this manner about 4.54 billion years ago (with an uncertainty of 1%) and was largely completed within 10–20 million years. The solar wind of the newly formed T Tauri star cleared out most of the material in the disk that had not already condensed into larger bodies

Answer:

More than 70 meteorites that have fallen to Earth have had their ages calculated by radiometric dating. The oldest of these are between 4.4 billion and 4.5 billion years old. Fifty thousand years ago, a rock hurled down from space to form Meteor Crater in Arizona.Scientists now think the Earth's story began around 4.6 billion years ago in a disk-shaped cloud of dust and gas rotating around the early sun, made up of material left behind after the sun's formation.

Explanation:

Earth is estimated to be 4.54 billion years old, plus or minus about 50 million years. Scientists have scoured the Earth searching for the oldest rocks to radiometrically date. In northwestern Canada, they discovered rocks about 4.03 billion years old.By measuring the age of rocks on the moon, and meteorites found on Earth, scientists estimate the Earth consolidated by 4.54 billion years ago.Formation. When the solar system settled into its current layout about 4.5 billion years ago, Earth formed when gravity pulled swirling gas and dust in to become the third planet from the Sun. Like its fellow terrestrial planets, Earth has a central core, a rocky mantle, and a solid crust.

PLS MARK AS BRAINLIEST GAVE MORE INFO THAN THE 1ST ANSWER

Answer:

Answer:

arsenic

Explanation:

So basically it can be seen that the element is arsenic. Yeah. And now we see the element which has 6, 2 p electrons and lies in the 2nd period. So that is basically now because if we observe the electronic configuration of now it has atomic number 10 and its electronic configuration is one has to to s to two P six.

The Erosion caused by wind and beating an egg both the changes are physical change.

Erosion is defined as a geographical process in which earthen material will blow away and caused by a natural force such as wind or water.

There are mainly four types of erosion

Physical change can be defined as a type of change where only the physical properties of the matter changes.

Thus, the Erosion caused by wind and beating an egg both the changes are physical change.

To learn more about erosion, refer to the link below:

https://brainly.com/question/1599677

#SPJ1

The fungicide reaches to the leaves through the xylem's transpiration pull.

1. The fungicides are the chemicals which are used to removes fungus which on the plants and also stops the growth of fungus present on plants.

2. The fungicides are dissolved in water to make the dilute solution so that when it sprayed on the leaves, it easily absorbed by the soil.

3. The plants have special mechanism which helps in absorption of all the minerals that are present in the soil.

4. The xylem absorb mineral and water in the soil and phloem absorbs nutrients from the soil. Xylem pull ups the solution against the gravity and moves this solution to the surface of the leaves is called transpiration pull.

5. There are 3 mechanism that involved in the movement of fungicide are• Root pressure • Cohesive force • Capillary action

6. All these forces are worked to pull up the solution upward to the leaves.

Thus the xylem is a specialized mechanism present in the plants to pull up the solution upward against the gravity.

Learn more about Mechanism of Xylem here https://brainly.com/question/13596359

#SPJ9

The balanced chemical equation of a reaction between gaseous nitrogen and hydrogen to form gaseous ammonia is as follows; N₂ + 3H₂ → 2NH₃.

A chemical equation is a symbolic representation of a chemical reaction where reactants are represented on the left, and products on the right.

A chemical reaction is said to be balanced, in accordance with the law of conservation of matter, when the number of moles of each atom of elements on both sides of the equation are the same.

According to this question, gaseous nitrogen and hydrogen react to form gaseous ammonia. The balanced chemical equation is as follows:

N₂ + 3H₂ → 2NH₃

Learn more about chemical equation at: https://brainly.com/question/28294176

#SPJ1

Answer:

Explanation:

ye

The pH of a solution prepared by dissolving 2.05 g of sodium acetate in 50 mL of 0.25 M acetic acid is 5.06.

The above situation is a case of buffer solution.

The pH of a buffer solution can be calculated by the Henderson-Hasselbalch equation,

The equation is as follows:

pH = pKa + log[Salt]/[Acid]

In the above case, sodium acetate(CH3COONa) is the salt and acetic acid(CH3COOH) is the acid.

Putting [Salt] = 0.50 M and [Acid] = 0.25 M and pKa = 4.76 in the equation

pH = 4.76 + log[0.50]/[0.25]

pH = 4.76 + log2

pH = 4.76 + 0.30

pH = 5.06

Thus, the pH of a solution prepared by dissolving 2.05 g of sodium acetate in 50 mL of 0.25 M acetic acid is 5.06.

To know more about "buffer solution", refer to the link given below:

https://brainly.com/question/24262133?referrer=searchResults

#SPJ1

There are 4 * 10^24 atoms of hydrogen  in 0.48 moles of prevacid.

The drug prevacid is used as an antacid. What is does is to reduce the amount of acid that could be produced in the stomach of a person. As a result of this, the drug prevacid is able to relieve a person of heartburn and stomach ulcer.

Thus time, we want to obtain the number of hydrogen atoms that id present in one 0.48  moles of the drug prevacid.

We have that there are 14 hydrogen atoms in prevacid. Thus;

14 * 0.48 * 6.02 * 10^23 = 4 * 10^24 atoms of hydrogen.

Learn more about prevacid:https://brainly.com/question/10152810

#SPJ1

Answer:

196.96657 g/m

Explanation:

The molar mass of gold = 196.96657 g/m. The molar mass of gold is defined as the mass of 1 mole of gold atoms - typically specified in grams. Therefore the molar mass of gold is stated in units of grams/mole or g/m. It is also frequently called the Molecular Weight of Gold.

If 160.0 g of radioactive iron (59Fe ) is received in the lab today, Then the percentage of the original left after 180 days is 6.25 %.

Radioactive elements are those elements which are made up of those atoms whose nuclei is unstable and emits radiations or undergoes radioactive decay to attain stability or to form stable nuclei.

Given -

t = 180 days

t1/2 = 45 days

So,

n =    t     = 180 = 4

      t1/2       45

Amount of the remaining radioactive iron,

R = R°

     2n

where, n = 4

R =  1   = 0.0625

R°    2₄

To calculate percentage of original sample -

percentage of original sample of iron = R   x 100

                                                                   R°

                                                               = 0.0625 x 100

                                                               = 6.25 %

After 180 days, or 4 half lives, the percentage of radioactive iron remaining is 6.25%.

To learn more about radioactive element,

brainly.com/question/28023256

#SPJ1

If during a spectroscopy experiment a student notes a wavelength peak measurement at 280 nm, then the region of the electromagnetic spectrum observed is the UV region.

The electromagnetic spectrum refers to all types of wavelengths that radiation can emit as light, which involves both visible light and also ultraviolet (UV) radiation.

In conclusion, if during a spectroscopy experiment a student notes a wavelength peak measurement at 280 nm, the region of the electromagnetic spectrum observed is the UV region.

Learn more about the electromagnetic spectrum here:

https://brainly.com/question/23423065

#SPJ1

In the isotopes of Helium, Helium-3 has 2 electrons, 2 protons and 1 neutron whereas Helium-4 has 2 electron, 2 protons and 2 neutrons in it.

Isotopes are the atoms of same element having same atomic number but different mass number.

Mass number is represented as Z and atomic number is represented as A.

Atomic number = number of protons in the atom = number of electrons in the neutral state of the atom.

Mass number = number of protons + number of neutrons in the atom

so, number of neutrons can be calculated as = Atomic number - number of protons in it

For Helium-3

mass number = 3

and atomic number = 2

so number of electrons = number of protons = atomic number = 2

number of neutrons = mass number - number of protons

                                 = 3-2 = 1

For Helium-4

mass number = 4

and atomic number = 2

so number of electrons =number of protons = 2

number of neutrons = mass number - number of protons = 4-2 = 2

To learn more about isotopes here

https://brainly.com/question/27475737

#SPJ1

In a series circuit, the current can flow through only one path from start to finish.

The term circuit has to do with the path that current can pass through. Charge flows in a circuit in the direction that current is flowing. Also, resistors in a circuit could be connected in series or in parallel.

In a series connection, the resistors are connected end to end an current flows in one direction.

Thus, the statement that is true is that; In a series circuit, the current can flow through only one path from start to finish.

Learn more about circuit:https://brainly.com/question/21505732

#SPJ1

Answer: C. In a series circuit, the current can flow through only one path from start to finish.

(just took the test so C is right)

The correct answer to the given question is b) The average atomic mass of all isotopes is what an element’s atomic mass is based on in the periodic table.

An element has many isotopic masses, in which elements have same number of protons but different number of neutrons. An element in the periodic table has the average of all the isotopes. Atomic mass is the sum of protons and neutrons, without the involvement of electrons. For example, Chlorine has 2 isotopes Chlorine-35 having atomic mass 35 and Chlorine- 37 having atomic mass 37. The element Chlorine which is found in the periodic table has atomic mass 35.5 u, based on the average atomic masses and their relative abundance.

Therefore, atomic mass of an element on the periodic table is the average of their atomic mass of all isotopes.

Learn more about Atomic masses here:

https://brainly.com/question/5566317

#SPJ9

The density of the iron pyrite cube is 1.343 g/cm³.

Given,

Side of iron pyrite cube = 0.31 cm

Mass of iron pyrite = 0.040 g

The volume of iron pyrite cube = s³ cm³

Or, volume = 0.029791 cm³

We have to find the density of the sample.

Density is defined as the mass per unit volume. Or, it is the ratio of mass to the volume of the substance.

Using the formula for density, we get,

Density = mass/volume

Or, density = 0.40/0.029791

Or, density = 1.343 g/cm³

Hence, the density of the iron pyrite cube is 1.343 g/cm³.

To learn more about density, visit: https://brainly.com/question/15164682

#SPJ9

The pH of an aqueous solution with a hydrogen ion is 8.11

pH is the quantitative measure of the acidity or basicity of aqueous or other liquid solutions

Here given data is concentration of [H⁺]=7.6×10⁻⁹ M

We have to find pH=?

Then,  pH = -log(conc)

Then pH = -log(7.6×10⁻⁹)

pH = 8.11

Know more about pH

https://brainly.com/question/22938758

#SPJ1

Answer:

where is flow diagram.....

.........

A stick of butter weighs 0.25lbs. The weight of the stick of butter in milligrams is 113398.1.

Milligrams are the measurement quantity that is used to measure a substance in very minute quantities. It is the SI unit of mass. It is equivalent to one thousand grams.

lb is the symbol of a pound. It is used to measure an object in American and British systems of measurement. It is a value of weight.

1 lb = 453592 milligrams

0.25 lbs = 113398.1 milligrams

Therefore, the weight of the stick of butter in milligrams is 113398.1.

To learn more about milligrams, refer to the link:

https://brainly.com/question/8161648

#SPJ1

Answer:

14.4g/cm³

Explanation:

114/10=14.4g/cm³

Taking into account the definition of density, you have:

Density is defined as the property that matter has to compress into a given space. That is, density is a quantity that is defined as the amount of mass in a given volume of a substance.

The expression for calculating density is the ratio between the mass of a body and the volume it occupies:

density= mass÷ volume

Density is inversely proportional to volume: the smaller the volume occupied by a given mass, the higher the density.

In this case, you know that:

Replacing in the definition of density:

0.00523 kg/mL= 0.22777 kg÷ volume

Solving:

0.00523 kg/mL× volume= 0.22777 kg

volume= 0.22777 kg÷ 0.00523 kg/mL

volume= 43.55 mL= 0.04355 L (being 1000 mL= 1 L)

Finally, the volume will be 0.04355 L.

In this case, you know that:

Replacing in the definition of density:

density= 5880 mg÷ 1.91 mL

Solving:

density= 3,078.534 mg/mL

Finally, the density of the substance is 3,078.534 mg/mL.

In summary, you have:

Learn more about density:

brainly.com/question/952755

brainly.com/question/1462554

#SPJ1

Answer: Required personnel protection equipment (PPE) must be worn at all times

Explanation:

The frequency of an irradiation with wavelength of 2.54 × 10-⁷ metres is 1.18 × 10¹⁵ Hz.

The frequency of a radiation is the rate of occurrence of anything i.e. the relationship between incidence and time period.

The frequency of a wave can be calculated using the following formula;

λ = v/f

Where;

According to this question, an irradiation with wavelength of 2.54 × 10-⁷ metres is given. The frequency can be calculated as follows;

2.54 × 10-⁷ metres × f = 3 × 10⁸ metres/seconds

f = 3 × 10⁸ ÷ 2.54 × 10-⁷

f = 1.18 × 10¹⁵ Hz

Therefore, the frequency of an irradiation with wavelength of 2.54 × 10-⁷ metres is 1.18 × 10¹⁵ Hz.

Learn more about frequency at: https://brainly.com/question/3639648

#SPJ1

Answer:

Assume you have 1g of your sample.

Then 13.6% of this sample is Na, that is 0.136g.

Since you are to find the empirical formula, you need to find the number of moles of Na in 0.136g. You can do that by dividing by the atomic mass of Na: n(Na)=0.136g / 23.0 g/mol = 0.00591 mol

Next, you repeat this for all the other elements.

The last step is to pick the smallest number of moles that you get and divide the others by it. That way you should arrive at whole number coefficients for the empirical formula. The element with the smallest number of moles gets 1 as its coefficient).

Answer:

scientific is a study of things and scientific law is law

Explanation:

you can study scientific a ND and law

hshdfhdh

Answer:

Scientific theories and laws are both factual. However, scientific theories are statements that have been proven over and over again by dozens of scientists. For example, a theory would be that the solar system is heliocentric (planets revolve around the sun). Theories are also subject to change in the event of new technological innovations. Scientific laws are statements that are universal and are based on logic/math. These will not change because they describe what happens and they are rules. For example, Newton's laws of motion would be laws because they are rules of motion. Overall, scientific theories and laws describe why and what happens based on certain conditions and circumstances.

Nanometers is an SI subunit of length equal to 10-⁹ metres. It has a symbol of nm.

The conversion factor of metres to nanometers is as follows:

1 nanometres = 1 × 10-⁹ metres

Hence, 254 nanometers is equivalent to 2.54 × 10-⁷metres.

The frequency of a wave can be calculated using the following formula:

wavelength = wave velocity/frequency

frequency = 3 × 10⁸ ÷ 2.54 × 10-⁷

Frequency = 1.18 × 10¹⁵Hz

Therefore;

Learn more about frequency and wavelength at: https://brainly.com/question/3639648

#SPJ1

Taking into account the definition of photon and energy of a photon, the energy per photon is 8.3538×10⁻³⁸ J.

Electromagnetic radiation carries energy, which can be absorbed or emitted. To explain the processes of emission and absortion, Plank and Einstein proposed that the energy of radiation is composed of indivisible units (quanta). In each elemental process only a quantum of light can be emitted or absorbed. Each of these quanta was called a "photon".

The exchanges of energy between matter and radiation take place not continuously, but by discrete and indivisible quantities or quanta of energy. The quantum of energy is proportional to the frequency of radiation.

The relationship between the amount of energy (E) transported by the photon and its frequency (f) is determined by the following expression:

E=h×f

where:

In this case, you know:

Replacing in the definition of energy of a photon:

E= 1.26×10⁶ Hz× 6.63×10⁻³⁴ Js

E= 8.3538×10⁻³⁸ J

Finally, the energy per photon is 8.3538×10⁻³⁸ J.

Learn more about energy of a photon:

brainly.com/question/8924116

brainly.com/question/6945706

brainly.com/question/8000078

#SPJ1