Which person will most likely hear the loudest sound?

A
B
C
D

Answer:

About 3.06 seconds

Explanation:

[tex]v_f=v_o+at[/tex]

Since at the peak of its trajectory, the ball will have no velocity, you can write the following equation:

[tex]0=30+(-9.81)t\\\\-30=-9.81t\\\\t\approx 3.06s[/tex]

Hope this helps!

Answer:

Explanation:

From Newton's second Law of Motion,

F = ma

Ff + F = ma

Where F is the applied force, Ff is the frictional force, a is the acceleration and m is the mass of the object or box.

Magnitude of the acceleration:

a = Ff+F/m

This must act in the direction of F or the box would slide or accelerate off the negative side of the board (taking the direction of F to be positive

Answer:

* air resistance.

*the direction of the rotation of the Earth

rotation of the thrown body

Explanation:

The projectile launch is described by the expressions

x-axis         x = v₀ₓ t

y-axis         y = [tex]v_{oy}[/tex] t - ½ gt²

When the things that affect this movement are analyzed, in order of importance we have:

* air resistance. This significantly changes the body's horizontal position, so it introduces a horizontal acceleration that is not contained in the equations.

* air resistance. At the height that the body reaches, since air resistance has the same direction as the gravity of gravity and therefore the relationship is more challenging.

* to a lesser extent the direction of launch, in the direction of the rotation of the Earth against. Since this creates an operational on the x and y axis that changes the initial assumption

* The possible rotation of the thrown body, since this rotation creates a lift that is not taken in the equations, this value is more noticeable the lighter the body, this effect has to keep the body longer in the air achieving more reach and height

Answer:

The lifetime of the particle is  [tex]\Delta t = 2.6*10^{-25} \ s[/tex]

Explanation:

From the question we are told that

    The average rest energy is [tex]E = 91.19 \ GeV = 91.19GeV * \frac{1.60 *10^{-10} J }{1GeV} = 1.46 *10^{-8}J[/tex]

    The intrinsic width is  [tex]\Delta E =2.5eV = 2.5GeV * \frac{1.60 *10^{-10}J }{1GeV} = 4*10^{-10} J[/tex]

The lifetime is mathematically represented as

     [tex]\Delta t = \frac{h}{\Delta E}[/tex]

Where h is the Planck's constant with a value of  [tex]1.055*10^{-34} \ J\cdot s[/tex]  

substituting values

    [tex]\Delta t = \frac{1.055*10^{-34}}{4 *10^{-10}}[/tex]

     [tex]\Delta t = 2.6*10^{-25} \ s[/tex]

Answer:

Explanation:

The man comes to halt due to reaction force acting on him in opposite direction . If R be the reaction force

impulse by net  force = change in momentum

Net force = R - mg , mg is weight of the man .

( R-mg ) x 2. 07 x 10⁻³ = 73 x 6.46 - 0

R - mg = 227.81 x 10³

Average net force = 227.81 x 10³ N .

Answer:

hypothesis , hope it helps

Explanation:

Answer:

Inference

Explanation:

Inference is something you predict after testing that's a result after an hypothesis has been made. Hypothesis is an intelligent guess based on some observed phenomena which can be subjected to further testing.

Answer:

India is a peninsula.

Explanation:

India is called as Indian Peninsula because it is surrounded by the Indian ocean on the south, the Arabian sea on the west and the Bay of Bengal on the east.

Answer: Around 0:35 Pm or 12:35 Am

Explanation:

The equation that describes the cooling of objects can be written as:

T(t) = Ta + (Ti - Ta)*e^(k*t)

Where Ta is the ambient temperature, here Ta = 25°C.

Ti is the initial temperature of the body, we have Ti = 37°C.

t is the time.

k is a constant.

So our equation is:

T(t) = 25°C +12°C*e^(k*t)

at 2pm, the temperature was 33°C

at 3pm, the temperature was 31°C.

we want to find the hour where we have our t = 0, suppose this hour is X.

then we can write our times as:

2pm ---> 2 - X

3pm ----> 3 - X

and our equations are:

33°C = 25°C + 12°C*e^(k2 - k*X)

31° = 25°C + 12°C*e^(k3 - k*X)

So we have two equations and two variables, let's solve the system.

first, simplify it a bit, for the first eq:

33 - 25 = 12*e^(k2 - k*X)

8/12 = e^(k2 - k*X)

ln(8/12) = k*2 - k*X

for the second equation we have:

31 - 25 = 12*e^(k3 - k*X)

6/12 = e^(k3 - k*X)

ln(6/12) = k*3 - k*X

So our equations are:

1) ln(2/3) = 2*k - X*k

2) ln(1/2) = 3*k - X*k

First, let's isolate one of the variables in one of the equations. let's isolate k in the first equation.

ln(2/3)/(2-X) = k

now we can replace it in the second equation:

ln(1/2) = 3*ln(2/3)/(2 - X) - X*ln(2/3)/(2-X)

now let's solve it for X, i will take a = ln(1/2) and b = ln(2/3) so it is easier to read.

a = 3*b/(2 - X) - X*b/(2 - X)

a*(2 - X) = 3*b - X*b

2a - aX = 3b - Xb

X(a - b) = 2a - 3b

X = (2*ln(1/2) - 3*ln(2/3))/(ln(1/2) - ln(2/3)) = 0.590

now, knowing that one hour has 60 minutes, then this is:

0.59*60m = 35 minutes

So the hour of death is 0:35 Pm or 12:35 Am

Answer:

The entropy change of the Universe that occurs is 19.346 J/K

Explanation:

Given;

temperature of the sun, [tex]T_s[/tex] = 5,300 K

temperature of the Earth, [tex]T_E[/tex] = 293 K

radiation energy transferred by the sun to the earth, E = 6000 J

The sun loses Q of heat and therefore decreases its entropy by the amount

[tex]\delta S_{sun} = \frac{-Q}{T_s}[/tex]

The earth gains Q of heat and therefore increases its entropy by the amount

[tex]\delta S_{Earth} = \frac{-Q}{T_E}[/tex]

The total entropy change is:

[tex]\delta S_{Earth} + \delta S_{sun} = \frac{Q}{T_E} -\frac{Q}{T_S} \\\\ = Q(\frac{1}{T_E} -\frac{1}{T_S} )\\\\= 6000(\frac{1}{293} -\frac{1}{5300} )\\\\=6000(0.0032243)\\\\= 19.346 \ J/K[/tex]

Therefore, the entropy change of the Universe that occurs is 19.346 J/K

Answer:

17.85°

Explanation:

To find the angle to the normal in which the light travels in the aqueous fluid you use the Snell's law:

[tex]n_1sin\theta_1=n_2sin\theta_2[/tex]

n1: index of refraction of Sophia's cornea = 1.387

n2: index of refraction of aqueous fluid = 1.36

θ1: angle to normal in the first medium = 17.5°

θ2: angle to normal in the second medium

You solve the equation (1) for θ2, next, you replace the values of the rest of the variables:

[tex]\theta_2=sin^{-1}(\frac{n_1sin\theta_1}{n_2})\\\\\theta_2=sin^{-1}(\frac{(1.387)(sin17.5\°)}{1.36})=17.85\°[/tex]

hence, the angle to normal in the aqueous medium is 17.85°

Answer:

The voltage is  [tex]V = 418.60 \ Volts[/tex]  

Explanation:

From the question we are told that

    The area of the both plate is  [tex]A = 7.00 *10^{-3} \ m^2[/tex]

    The distance between the plate is [tex]d = 4.80*10^{-4}\ m[/tex]

     The magnitude of the charge is  [tex]q = 5.40 *10^{-8} \ C[/tex]

The capacitance of the capacitor that consist of the two plates is mathematically represented as

        [tex]C = \frac{\epsilon _o A}{d}[/tex]

Where [tex]\epsilon_o[/tex] is the permitivity of free space with a value  [tex]e = 8.85*10^{-12} \ m^{-3} \cdot kg^{-1}\cdot s^4 \cdot A^2[/tex]

So

       [tex]C = \frac{8.85*10^{-12} * (7* 10^{-3})}{ 4.8*10^{-4}}[/tex]

        [tex]C = 1.29 *10^{-10} \ F[/tex]

The potential difference between the plate is mathematically represented as

      [tex]V = \frac{ Q}{C }[/tex]

     [tex]V = \frac{ 5.4*10^{-8}}{1.29 *10^{-10}}[/tex]

     [tex]V = 418.60 \ Volts[/tex]

Explanation:

The answer is B because Nuclear family mean a family with two kids and Mrs. Parker have two kids

Answer:

a)  v₀ = - 164.62 m / s , c) y = 122.5 m

Explanation:

We can solve this exercise using the free fall kinematic relations.

We put our reference system on the floor, so the height of the skyscraper is y₀ = 180m and the floor level is y = 0 m

For the boy

         y = y₀ + v₀ t - ½ g t²

with free fall its initial speed is zero

        y = ½ g t2

For superman

        y = y₀ + v₀ (t-5) - ½ g (t-5)²

how superman grabs the lot just before hitting the ground

we look for the time it takes the boy down

         t = √ (2 y₀ / g)

         t = √ (2 180 / 9,8)

         t = 6.06 s

in the equation for superman, we clear the volume and calculate

         v₀ (t-5) = -y₀ + ½ g (t-5)²

         v₀ (6.06 -5) = -180 + ½ 9.8 (6.06 -5)²

         v₀ 1.06 = -174.49

         v₀ = - 174.49 / 1.06

         v₀ = - 164.62 m / s

the negative sign indicates that the initial speed is down

b) to graph the position of the two we use the table

  t (s)      Y_boy (m)   Y_superman (m)

    0             180                 180

   1              175.1               180

   5              57.5              180

   6                3.6                10.18

see attachment for the two curves

c) calculate the height that falls a lot in the 5 seconds (t = 5)

           y = -1/2 g t²

           y = ½ 9.8 5²

           y = 122.5 m

for this height superman has not yet left the skyscraper, so the boy hits the ground

Answer:

C) less than 129 lb.

Explanation:

Let the elevator be slowing up with magnitude of a . That means it is accelerating downwards  with magnitude a .

If R be the reaction force

For the elevator is going downwards with acceleration a

mg - R = ma

R = mg - ma

R measures its apparent weight . Spring scale will measure his apparent weight.

So its apparent weight is less than 129 lb .

Answer:

A. F = 0.06 N

B. t = 6.37 s

Explanation:

A)

First we need to find the constant acceleration of the cart. For this purpose, we use 2nd equation of motion:

s = (Vi)(t) + (0.5)at²

where,

s = distance traveled = 1.62 m

Vi = 0 m/s   (Since, it starts from rest)

t = Time Taken = 4.34 s

a = acceleration = ?

Therefore,

1.62 m = (0 m/s)(4.34 s) + (0.5)(a)(4.34 s)²

1.62 m/9.4178 s² = a

a = 0.172 m/s²

Now, from Newton's Second law, we know that:

F = ma

where,

F = Net Force of the combination = ?

m = Mass pf combination = 354 g = 0.354 kg

Therefore,

F = (0.354 kg)(0.172 m/s²)

F = 0.06 N

B)

Now, for the same force, but changed mass = 762 g = 0.762 kg, we have the acceleration to be:

F = ma

a = F/m

a = 0.06 N/0.762 kg

a = 0.08 m/s²

Now, using  2nd equation of motion:

s = (Vi)(t) + (0.5)at²

1.62 m = (0 m/s)(t) + (0.5)(0.08 m/s²)t²

t² = 1.62 m/(0.04 m/s²)

t = √40.54 s²

t = 6.37 s

Answer:

24 Newtons

Explanation:

The force exerted in the middle cube needs to be enough to move the middle cube and the right cube with an acceleration of 2 m/s2.

The mass of those two cubes combined is 6 + 6 = 12 kg

So, using the following equation, we can find the force:

Force = mass * acceleration

Force = 12 * 2

Force = 24 Newtons

Explanation:

Complete the first and second sentences, choosing the correct answer from the given ones.

1. T = 100 K

[tex]^{\circ}C=K-273[/tex]

Put T = 100 K

[tex]T=100-273=-173^{\circ} C[/tex]

A temperature of 100 K corresponds on a Celsius scale to (-173 °C)

2. T = 50 °C

[tex]K=^{\circ}C+273\\\\K=50+273\\\\T=323\ K[/tex]

So, At 50 °C, it corresponds to a Kelvin scale of 323 K.

ANSWER: num 1 is black hole

Answer:

Angle = 18.41°

Explanation:

Torque = F•r•sin θ

where;

F = force

r = distance from the rotation point

θ = the angle between the force and the radius vector.

We are given;

Torque = 15 N.m

F = 95 N

r = 0.5 m

Thus, plugging in the relevant values ;

15 = 95 × 0.5 × sin θ

sin θ = 15/(95 × 0.5)

sin θ = 0.3158

θ = sin^(-1)0.3158

θ = 18.41°

Answer:

Stretch in the spring = 0.1643 (Approx)

Explanation:

Given:

Mass of the sled (m) = 9 kg

Acceleration of the sled (a) = 2.10 m/s ²

Spring constant (k) = 115 N/m

Computation:

Tension force in the spring  (T) = ma

Tension force in the spring  (T) = 9 × 2.10

Tension force in the spring  (T) = 18.9 N

Tension force in the spring = Spring constant (k) × Stretch in the spring

18.9 N = 115 N  × Stretch in the spring

Stretch in the spring = 18.9 / 115

Stretch in the spring = 0.1643 (Approx)

Answer:

The net torque exerted on CD is [tex]1.680 \times 10^{-3}\,N\cdot m[/tex].

Explanation:

As CD is acceleration uniformly, the following equation of motion can be used to determine the angular acceleration:

[tex]\dot n^{2} = \dot n_{o}^{2} + 2\cdot \ddot n \cdot \Delta n[/tex]

Where:

[tex]\dot n_{o}[/tex] - Initial angular speed, measured in revolutions per minute.

[tex]\dot n[/tex] - Final angular speed, measured in revolutions per minute.

[tex]\ddot n[/tex] - Angular acceleration, measured in revolution per square minute.

[tex]\Delta n[/tex] - Change in angular position, measured in revolutions.

The angular acceleration is cleared and calculated:

[tex]\ddot n = \frac{\dot n^{2}-\dot n_{o}^{2}}{2\cdot \Delta n}[/tex]

Given that [tex]\dot n_{o} = 0\,\frac{rev}{min}[/tex], [tex]\dot n = 430\,\frac{rev}{min}[/tex] and [tex]\Delta n = 4\, rev[/tex], the angular acceleration is:

[tex]\ddot n = \frac{\left(430\,\frac{rev}{min} \right)^{2}-\left(0\,\frac{rev}{min} \right)^{2}}{2\cdot (4\,rev)}[/tex]

[tex]\ddot n = 23112.5\,\frac{rev}{min^{2}}[/tex]

The angular accelaration measured in radians per square second is:

[tex]\alpha = \left(23112.5\,\frac{rev}{min^{2}} \right)\cdot \left(2\pi\,\frac{rad}{rev}\right)\cdot \left(\frac{1}{3600}\,\frac{min^{2}}{s^{2}} \right)[/tex]

[tex]\alpha \approx 40.339\,\frac{rad}{s^{2}}[/tex]

Net torque experimented by the CD during its accleration is equal to the product of its moment of inertia with respect to its axis of rotation and angular acceleration:

[tex]\tau = I \cdot \alpha[/tex]

Where:

[tex]I[/tex] - Moment of inertia, measured in [tex]kg \cdot m^{2}[/tex].

[tex]\alpha[/tex] - Angular acceleration, measured in radians per square second.

In addition, a CD has a form of a uniform disk, whose moment of inertia is:

[tex]I = \frac{1}{2}\cdot m \cdot r^{2}[/tex]

Where:

[tex]m[/tex] - Mass of the CD, measured in kilograms.

[tex]r[/tex] - Radius of the CD, measured in meters.

If [tex]m = 0.017\,kg[/tex] and [tex]r = 0.07\,m[/tex], then:

[tex]I = \frac{1}{2}\cdot (0.017\,kg)\cdot (0.07\,m)^{2}[/tex]

[tex]I = 4.165\times 10^{-5}\,kg\cdot m^{2}[/tex]

Now, the net torque exerted on CD is:

[tex]\tau = (4.165\times 10^{-5}\,kg\cdot m^{2})\cdot \left(40.339\,\frac{rad}{s^{2}} \right)[/tex]

[tex]\tau = 1.680\times 10^{-3}\,N\cdot m[/tex]

The net torque exerted on CD is [tex]1.680 \times 10^{-3}\,N\cdot m[/tex].

Complete Question

A lawn mower has a flat, rod-shaped steel blade that rotates about its center. The mass of the blade is 0.65 kg and its length is 0.55 m. You may want to review (Pages 314 - 318) .

Part A What is the rotational energy of the blade at its operating angular speed of 3510 rpm

Part B

If all of the rotational kinetic energy of the blade could be converted to gravitational potential energy, to what height would the blade rise?

Answer:

Part A  

    [tex]R = 1081 \ J[/tex]

Part B  

     [tex]h = 169.7 \ m[/tex]

Explanation:

From the question we are told that

  The mass of the blade is  [tex]m_b = 0.65 \ kg[/tex]

   The length is  [tex]l = 0.55 \ m[/tex]

   The angular speed is  [tex]w = 3510 rpm = 3510 * \frac{2 \pi }{60} = 367.6 \ rad/sec[/tex]

Generally the moment of inertia of the of this mower is mathematically evaluated as

         [tex]I = \frac{m_b * l^2 }{12}[/tex]

substituting values

         [tex]I = \frac{0.65 * 0.55^2 }{12}[/tex]

         [tex]I = 0.016 \ kg m^2[/tex]

Generally the rotational kinetic energy of the bland is  

        [tex]R = \frac{1}{2} * I * w^2[/tex]

substituting values

       [tex]R = \frac{1}{2} * 0.016 * 367.6^2[/tex]

     [tex]R = 1081 \ J[/tex]

At point where the gravitational potential energy is equal to the rotational kinetic energy  we have that

       [tex]P = R = m_b * h * g[/tex]

Where P is the  gravitational potential energy

substituting values

          [tex]1081 = 0.65 * 9.8 * h[/tex]

=>       [tex]h = 169.7 \ m[/tex]

Answer:

A light wave will not stop if it enters a new medium perpendicular to the surface.

Explanation:

A light wave will not have any deviation if it enters a new medium perpendicular to the surface.

Refraction is defined as an optical phenomenon by which the direction of a light wave gets changed when it travels from one medium to another. This is because of the change in speed.

Here,

The light wave is entering a new medium such that it enters perpendicular to the surface. Angle of incidence is the angle between the incident ray and the line perpendicular to the surface at the point of incidence. Since, here the light ray is incident normal to the surface that means the angle of incidence is 0.

According to Snell's law,

sin i = μ sin r

where i is the angle of incidence, r is the angle of refraction and μ is the constant called refractive index.

As i = 0, sin i = 0

So, μ sin r = 0

Since μ is a constant, we can say that sin r = 0 or the angle of refraction,

r = 0

This means that there is no refraction and hence the light wave won't get deviated when it enters the medium normally.

Hence,

A light wave will not have any deviation if it enters a new medium perpendicular to the surface.

To learn more about refraction, click:

https://brainly.com/question/14397443

#SPJ3

Answer:

I = 4.189 mA    V = 0.338 V

Explanation:

In order to do this, we need to apply the following expression:

I = Is[exp^(qV/kT) - 1]   (1)

However, as the junction of the diode is illuminated, the above expression changes to:

I = Iopt + Is[exp^(qV/kT) - 1]   (2)

Now, as the shunt resistance becomes infinite while the current becomes zero, we can say that the leakage current is small, and so:

I ≅ Iopt

Therefore:

I ≅ I₀Aλq / hc  (3)

Where:

I₀A = Area of diode (radiation)

λ: wavelength

q: electron charge (1.6x10⁻¹⁹ C)

h: Planck constant (6.62x10⁻³⁴ m² kg/s)

c: speed of light (3x10⁸ m/s)

Replacing all these values, we can get the current:

I = (8x10⁻³) * (0.65x10⁻⁶) * (1.6x10⁻¹⁹) / (6.62x10⁻³⁴) * (3x10⁸)

I = 4.189x10⁻³ A or 4.189 mA

Now that we have the current, we just need to replace this value into the expression (2) and solve for the voltage:

I = Is[exp^(qV/kT) - 1]

k: boltzman constant (1.38x10⁻²³ J/K)

4.189x10⁻³ = 9x10⁻⁹ [exp(1.6x10⁻¹⁹ V / 1.38x10⁻²³ * 300) - 1]

4.189x10⁻³ / 9x10⁻⁹ = [exp(38.65V) - 1]

465,444.44 + 1  = exp(38.65V)

ln(465,445.44) = 38.65V

13.0508 = 38.65V

V = 0.338 V

Answer:

General Expression: E = kql/(l² + r²)^(3/2)

(a) 6.3 MN/C

(b) 22.8 MN/C

(c) 6.1 MN/C

(d) 0.63 MN/C

Explanation:

The general expression for electric field along axis of a uniformly charged ring is:

E = kqL/(L² + r²)^(3/2)

where,

E = Electric Field Strength = ?

k = Coulomb's Constant = 9 x 10⁹ N.m²/C²

q = Total Charge = 71 μC = 71 x 10⁻⁶ C

L = Distance from center on axis

r = radius of ring = 10 cm = 0.1 m

(a)

L = 1 cm = 0.01 m

Therefore,

E = (9 x 10⁹ N.m²/C²)(71 x 10⁻⁶ C)(0.01 m)/[(0.01 m)² + (0.1 m)²]^(3/2)

E = (6390 N.m³/C)/(0.00101 m³)

E =  6.3 x 10⁶ N/C = 6.3 MN/C

(b)

L = 5 cm = 0.05 m

Therefore,

E = (9 x 10⁹ N.m²/C²)(71 x 10⁻⁶ C)(0.05 m)/[(0.05 m)² + (0.1 m)²]^(3/2)

E = (31950 N.m³/C)/(0.00139 m³)

E =  22.8 x 10⁶ N/C = 27.4 MN/C

(c)

L = 30 cm = 0.3 m

Therefore,

E = (9 x 10⁹ N.m²/C²)(71 x 10⁻⁶ C)(0.3 m)/[(0.3 m)² + (0.1 m)²]^(3/2)

E = (191700 N.m³/C)/(0.03162 m³)

E =  6.1 x 10⁶ N/C = 6.1 MN/C

(d)

L = 100 cm = 1 m

Therefore,

E = (9 x 10⁹ N.m²/C²)(71 x 10⁻⁶ C)(1 m)/[(1 m)² + (0.1 m)²]^(3/2)

E = (639000 N.m³/C)/(1.015 m³)

E =  0.63 x 10⁶ N/C = 0.63 MN/C

Answer:(a)

Explanation:

Student must have known that insulators can only be charged when they are rubbed against each other. In this process, one becomes electrically negative while other becomes electrically positive such that both have the same magnitude. The one which gains electrons becomes electrically negative due to the transfer of electrons while others lose the electron becomes positive due to the transfer of an electron to another body.

Answer:

d

Explanation:

good question. now the bus is moving in constant velocity . a student in front tosses a ball to the student in back. but we dont know the speed at which the student tosses a ball. we have to assume the speed

assume the speed of ball is slightly less than the speed of bus. in this case the stationary observer sees the ball in slower speed than the one inside the bus.

so a is correct

now assume the speed of ball is 1/2 the speed of bus. here stationary observer sees the ball the same speed as the one in bus observe

b is correct

assume the speed of ball is very small than the speed of bus . in this case the stationary observer see in grater speed than the student in bus

e also correct

so correct answer is d. it depends on the speed of ball tossed by the student in front.

Answer:

Answer D is correct

Explanation:

[tex]pressure = \frac{force}{area} \\ = \frac{320}{0.5} \\ = 640[/tex]

hope this helps

brainliest appreciated

good luck! have a nice day!

Answer:

[tex]{0.51 \mathrm{m} / \mathrm{s}^{2}}[/tex]

Explanation:

Angular acceleration

[tex]\begin{aligned}

\alpha &=\frac{\left(\omega_{f}-\omega_{i}\right)}{t} \\

\omega_{i} &=0 \\

\omega_{f} &=4.30 \mathrm{rev} / \mathrm{s} \\

&=4.30 \times 2 \pi \mathrm{rad} / \mathrm{s} \\

&=27.02 \mathrm{rad} / \mathrm{s} \\

\alpha &=\frac{(27.02-0)}{3.15} \\

&=8.57 \mathrm{m} / \mathrm{s}^{2}

\end{aligned}[/tex]

a)Tangential acceleration

[tex]\begin{aligned}

a &=r \alpha \\

&=\frac{12}{2} \times 10^{-2} \times 8.57 \\

a &=0.51 \mathrm{m} / \mathrm{s}^{2}

\end{aligned}[/tex]

The tangential acceleration of the disc is [tex]{0.51 \mathrm{m} / \mathrm{s}^{2}}[/tex]

This question involves the concepts of the equations of motion for angular motion.

The tangential acceleration of a point on the outer rim of the disk at the moment when its angular speed reaches 2 rev/s will be "0.532 m/s²".

First, we will use the first equation of motion for the angular motion to find out the angular acceleration:

[tex]\alpha=\frac{\omega_f-\omega_i}{t}[/tex]

where,

[tex]\alpha[/tex] = angular acceleration = ?

[tex]\omega_f[/tex] = final angular speed = (4.3 rev/s)[tex](\frac{2\pi\ rad}{1\ rev})[/tex] = 27.02 rad/s

[tex]\omega_i[/tex] = initial angular speed = 0 rad/s

t = time taken = 3.05 s

Therefore,

[tex]\alpha =\frac{27.02\ rad/s-0\ rad/s}{3.05\ s}\\\\\alpha= 8.86\ rad/s^2[/tex]

Now, the tangential acceleration can be given as follows:

[tex]a=r\alpha\\a=(\frac{diameter}{2})(8.86\ rad/s^2)\\\\a=(\frac{0.12\ m}{2})(8.86\ rad/s^2)\\\\[/tex]

a = 0.532 m/s²

Learn more about the angular motion here:

brainly.com/question/14979994?referrer=searchResults

The attached picture shows the angular equations of motion.

Answer:

Explanation:

According to snell's law which states that the ratio of the sin of incidence (i) to the angle of refraction(n) is a constant for a given pair of media.

sini/sinr = n

n is the constant = refractive index

Since the diver shines light up to the surface of a flat glass-bottomed boat, the refractive index n = nw/ng

nw is the refractive index of water and ng is that of glass

sini/sinr = nw/ng

given i = 30°, nw = 1.33, ng = 1.5, r = angle the light leave the glass

On substitution;

sin 30/sinr = 1.33/1.5

1.5sin30 = 1.33sinr

sinr = 1.5sin30/1.33

sinr = 0.75/1.33

sinr = 0.5639

r = arcsin0.5639

r ≈35°

angle the light leave the glass is 35°