Which quantity Has the same unit as potential difference

Answer:

While making a bridge or a building, the first thing that comes to our mind is that these are always made by the combination of concrete and steel. Concrete is cheap, but it has the property of breaking when it is twisted or under tension. Steel is expensive, If we made the whole thing with it, it will cost a lot. To provide strength under a reasonable cost, we use the combination of concrete and steel. Another postive point which they have together is that they both expand equally under heat, because they have the same coefficient of thermal expansion. It proves really useful, because if they had different coefficients of thermal expansions, one would expand more than the other, which will create tensions in the mixture and would break it easily. In the case, many cracks would start to appear in the bridge or buildings, which will eventually break them.

Answer:

During charging by conduction, both objects acquire the same type of charge. If a negative object is used to charge a neutral object, then both objects become charged negatively. ... In this case, electrons are transferred from the neutral object to the positively charged rod and the sphere becomes charged positively.

Answer:

evaporation

Explanation:

vapor is having higher temperature (also energy) that the liquid it left behind.

that's why the water vapor leave the surface of water which can only have a maximum temperature as 100°C

Given :

The frequency of travelling sound = f = 282 Hz

The speed of travelling sound = c = 343 m/s

To Find :

The distance of waves crests

Solution :

∵ wavelength of sound wave =

i.e         =

Or,        =

∴          = 1.12   m

So, The wavelength of sound wave =   = 1.21  m

Thus , The distance of waves crests =wavelength of sound wave = 1.21 m

Hence, The distance of waves crests is 1.21 meters    Answer

Answer:

A fraction of the wave will be reflected at the junction and the remainder will be transmitted through the junction into the thin rope

Explanation:

When the junction of the thin and the thick rope is reached by the wave, the wave behaves in the following two ways;

1) A fraction of the incident wave from the thick rope to the junction/boundary of the thin rope will be reflected back to in the direction of the thick rope with a lower amplitude and upright

2) A fraction of the incident wave from the thick rope to the junction/boundary of the thin rope will be transmitted through the thin rope such that the transmitted pulse on the thin rope will have an higher amplitude than that of the thick rope due to the available energy in the wave pulse and the lesser weight of the thin rope.

Answer:

400m

Explanation:

From Newton's law of motion;

S = ut + 1/2 at2

Where U is initial velocity

a is acceleration

t is velocity hence;

S is distance covered

S = 20×10 + 1/2 × 4×(10)^2

= 200 + 200 = 400m

[tex]power = 205.8 \: watt \\ solution \\ mass = 66 \: kg \\ time = 44 \: sec \\ distance = 14 \\ now \\ power = \frac{w}{t} \\ \: \: \: \: \: \: \: \: = \frac{f \times d}{t} \\ \: \: \: \: \: = \frac{m \times g \times d}{t} \\ \: \: \: \: \: \: = \frac{66 \times 9.8 \times 14}{44} \\ \: \: \: \: = \frac{9055.2}{44} \\ \: \: \: \: \: = 205.8 \: watt \\ hope \: it \: helps[/tex]

Answer:

[tex]T_{m }[/tex] = 4.86 s

[tex]T_{e}[/tex] = 1.98 s

Explanation:

Given:

Length = l = 1 m

Acceleration due to gravity of moon = [tex]g_{m}[/tex] = 1.67 m/s²

Acceleration due to gravity of Earth = [tex]g_{e}[/tex] = 10 m/s²

Required:

Time period = T = ?

Formula:

T = 2π [tex]\sqrt{\frac{l}{g} }[/tex]

Solution:

For moon

Putting the givens,

T = 2(3.14) [tex]\sqrt{\frac{1}{1.67} }[/tex]

T = 6.3 [tex]\sqrt{0.6}[/tex]

T = 6.3 × 0.77

T = 4.86 sec

For Earth,

Putting the givens

T = 2π [tex]\sqrt{\frac{1}{10} }[/tex]

T = 2(3.14) [tex]\sqrt{0.1}[/tex]

T = 6.3 × 0.32

T = 1.98 sec

Answer:

636.4 J

Explanation:

The potential energy between one of the charges at the corner of the square and the fifth identical charge is U = kq²/r where q = charge = +50 × 10⁻⁶ C  and r = distance from center of square. = √2 m (since the midpoint of the sides = 1 m, so the distance from the charge at the corner to the center is thus √(1² + 1²) = √2)

Since we have four charges, the additional potential energy to move the charge to the centre of the square is U' = 4U = 4kq²/r

U' = 4kq²/r

= 4 × 9 × 10⁹ Nm²/C² (+50 × 10⁻⁶ C)²/√2 m

= 900 Nm²/√2 m

= 636.4 J

The total external energy required is 636.4 J.

According to the question, a square of side a = 2m has 4 identical charges on the corners with charge Q = 50×10⁻⁶C.

A fifth identical charge is brought at the geometric center of the square. The geometric center is at the center of the diagonal:

[tex]r=\frac{a}{\sqrt{2} }=\sqrt{2}\;m[/tex]

The potential energy is a state function which means that it depends on the initial and final position.

Now the energy required is equal to the change in potential energy

[tex]\Delta U=\frac{1}{4\pi\epsilon_o}\frac{4Q^2}{r}\\\\\Delta U=\frac{4\times9\times10^9\times(50\times10^{-6})^2}{\sqrt{2} } \\\\\Delta U=636.4\;J[/tex]

Learn more about electric potential energy:

https://brainly.com/question/13003272?referrer=searchResults

Answer:

48.26 m

Explanation:

time to goes up (till stop for a while in the air - maximum height)

vt = vo + a t

0 = 15 + g . t

0 = 15 + (-9.8) . t

9.8t = 15

t = 1.531 s

so the time left to goes down is

4.0 - 1.531 = 2.469 s

height from the top of building can find it by using

vo =√(2gh)

15 = √(2)(9.8).h

15² = 19.6h

h = 225/19.6 = 11.48 m

so the distance of maximum height to the ground is

t = √(2H/g)

2.469 = √(2H/9.8)

2.469² = 2H/9.8

6.096 = 2H/9.8

2H = 6.096 x 9.8 = 59.74 m

so the vertical distance of the building (or the building height's is)

H - h = 59.74 - 11.48 = 48.26 m

Answer:

20 V

Explanation:

Power is 100 J/s or 100 W.

We know that P = IV = [tex]\frac{V^{2} }{R}[/tex] .

Isolate the potential difference. V = [tex]\sqrt{RP}[/tex] = [tex]\sqrt{100 * 4}[/tex] = 20 V

Answer:

Explanation:

The force acting to the right of the body is acting in the positive x direction while the force acting to the left of the body is acting in the negative x direction.

If a force of 12N acts to the left on a body and a force of 16 N acts to the right, force acting to the left will be -12N while that acting to the right will be +16N.

The resultant force acting on the bod will be the sum of the two forces.

Resultant = -12N+16N

Resultant = 4N

The direction of the resultant force will be towards the right since the resultant is a positive value.

Answer:

1237.5N

Explanation:

Recall that F = ma ........1

Where F is the applied force in Newton

M is the mass in kg

And a is the acceleration in meter per seconds.

F = ?

Mass = 275kg

a = 4.50 m/s^2

Substituting the values into equation 1

F = 275kg × 4.50 m/s^2

F = 1237.5N

The force exerted on them will be 1237.5N

His name is

Narendra Modi

Answer:

Hey!

*its kinda the wrong topic but ill answer anyway!!!*

The Prime Minister of India is...

Explanation:

HOPE THIS HELPS!!

Answer:

laa a

Explanation:poque usairea  ye aire tienfe luza preopia mkr

Answer:

Solar Panels

Explanation:

Answer:

2.12/R mW

Explanation:

The electrical power, P generated by the rod is

P = B²L²v²/R where B = magnetic field = 0.575 T, L = length of metal rod = separation of metal rails = 20 cm = 0.2 m, v = velocity of metal rod = 40 cm/s = 0.4 m/s and R = resistance of rod = ?

So, the induced emf on the conductor is

E = BLv

= 0.575 T × 0.2 m × 0.4 m/s

= 0.046 V

= 46 mV

The electrical power, P generated by the rod is

P = B²L²v²/R

=  B²L²v²/R

So, P = (0.575 T)² × (0.2 m)² × (0.4 m/s)²

= 0.002116/R W

= 2.12/R mW

Answer:

Ff = 7.35*10^5 N

Explanation:

To find the maximum transverse pulling force you use the following formula, for the friction force:

[tex]F_f=\mu N=\mu Mg[/tex] (1)

μ: friction coefficient = 0.15

N: normal force, which is equal to the weight over the wheel

M: mass of th train = 500 ton = 500 000 kg

g: gravitational acceleration = 9.8 m/s^2

You replace the values of the variables in the equation (1):

[tex]F_f=(0.15)(500000kg)(9.8m/s^2)=735000 N=7.35*10^5N[/tex]

hence, the maximum transverse pulling force is 7.35*10^5 N

Answer:

Yes, there a link between number of bulbs and current drawn from the power pack.

Explanation:

In an Electrical circuit, we have resistors present in that circuit. These resistors can be connected in two ways.

a) Series connection

b) Parallel connection

There is a link or a relationship between number of bulbs and the current drawn from the power pack. This is because the number of bulbs is equivalent to or equal to the number of resistors.

Hence,

a) In a series connection, the link or relationship between the number of bulbs(resistors) is as the number of light bulbs increases, the current in the power pack (circuit) decreases.

b) In a parallel connection, the link or relationship between the number of bulbs(resistors) is as the number of light bulbs increases, the current in the power pack (circuit) increases.

Answer:

D

Explanation:

Isothermal process is one that occurs on constant temperature example the vaporisation of water on boiling in an enclosed space .

At this time the temperature of the system remains constant .

Answer:

D.  the isothermal process

Explanation:

Answer:

The Earth is massive enough that the pull of gravity maintains its roughly spherical shape. Most of its deviation from spherical stems from the centrifugal force caused by rotation around its north-south axis. This force deforms the sphere into an oblate ellipsoid.

Answer:

C

Explanation:

Environmental factors provides ambiguity a particular one could be studied to see how it affects recyclable plastics.

Answer:

Image result for If the world was not tilted, what would happen to the people living on Earth

If the Earth weren't tilted on its axis, there would be no seasons. And humanity would suffer. When a Mars-size object collided with Earth 4.5 billion years ago, it knocked off a chunk that would become the moon. It also tilted Earth sideways a bit, so that our planet now orbits the sun on a slant

Explanation: i looked up the answer

Answer:

we would all maybe fall are sink in to the ground.

Explanation:

Answer:

USE RUBBER CLOVES

USE A PLIER

USE CONDUCTIVE WIRES

SWITHC OFF THE MAIN SWITCH WHILE WIRRING

Explanation:

Answer:

Shown from explanation

Explanation:

You have heard that expression what ever goes up must come down that's usually used to mean when you throw an object up, it comes down on its accord. This is due to a force on the earth that occurs in nature known as gravity.

So when an object falls under this influence it's said to fall freely.

Note not all heavenly bodies have gravitational pull, from experience by scientists who went to the moon they found out whatever goes up keeps flying endlessly so in that case an external force is needed to keep objects in the moon on ground level.

Hence the parachute falls on earth freely without an external force but on the moon it must fall with an external force inputed on the parachute system.

This means in the earth we have free fall but in the moon no such thing exist. So a body falls freely when there is gravity.

Answer:

The difference between P-N junction diode and extrinsic semiconductor is the allowable direction of flow of current

The extrinsic semiconductor can allow current to flow in both directions while the P-N junction diode permits only a unidirectional flow of current

Explanation:

A semiconductor is a substance that has an intermediate conductivity between that of conductors and non conductors

Examples of semiconductors  include germanium and cadmium selenide

A semiconductor to which impurities has been added (an activity known as doping) is an extrinsic semiconductor

Based on the functioning of a semiconductor, doping result in the formation of one of two types of semiconductors including;

1) N-type semiconductor that has an extra electron and the charge carriers are electrons

2) P-type semiconductor that has one less (-e⁻) electron and holes are the charge carriers

An extrinsic semiconductor can conduct allow the flow of electricity in both ways

A P-N junction diode consists of both the P and N-type extrinsic semiconductors arranged such that current can flow in only one direction.

Therefore, the difference is that the extrinsic semiconductor can allow current flow in both directions while the P-N junction diode permits only a unidirectional flow of current.

Answer:

The squeeze will not regain its shape

Explanation:

The squeeze bottle will not regain its shape.

This is because the atmospheric pressure compresses the squeeze bottle. Since the pressure in the squeeze bottle is now not equal to the atmospheric pressure since it has been corked tightly, its internal pressure cannot balance out the atmospheric pressure and thus cancel its effect.

So, the squeeze bottle does not regain its shape due to this imbalance of pressure.

Answer:

Explanation:

An electromagnet is obtained by winding an insulated wire round a soft iron rod with the wire ends connected to a DC source. such magnets have temporary magnetic properties which disappears with time as the current supply is cut off.

Furthermore the strength off an electromagnet

Explanation:

The relation between potential difference, current and resistance flowing in a circuit is given by using Ohm's law. It can be given by :

V = IR

[tex]I=\dfrac{V}{R}[/tex]

Resistance opposes the flow of electric current in the circuit. It means that, if resistance is more, less current will flow through the circuit.