Answer:
eggs fishing didn't ysjffj
what is a software house
Answer: a company whose primary products are various forms of software, software technology, distribution, and software product development. They make up the software industry.
this should be the answer
hoped this helped
A _______ is one typed character.
-gigabyte
-byte
-megabyte
-kilobyte
-terabyte
what is digital literacy? describe three examples of digital literacy skills
Digital literacy means having the skills you need to live, learn, and work in a society where communication and access to information is increasingly through digital technologies like internet platforms, social media, and mobile device
Examples of Digital Literacy skills:
What is digital literacy?
ICT proficiency.
Information literacy.
Digital scholarship.
Communications and collaborations.
Digital learning.
Digital identity.
Consider the following two data structures for storing several million words.
I. An array of words, not in any particular order
II. An array of words, sorted in alphabetical order
Which of the following statements most accurately describes the time needed for operations on these data structures?
A. Finding the first word in alphabetical order is faster in I than in II.
B. Inserting a word is faster in II than in I.
C. Finding a given word is faster in II than in I.
D. Finding the longest word is faster in II than in I.
Answer:
The correct answer is C.
Explanation:
Finding a given word requires the search operation. The search operation is faster in a sorted array compared to an unsorted array. In a sorted array the binary search method is used which runs on logarithmic time while in an unsorted array, there's no other way than linear search which takes O(n) time on the worst case where the required word is not in the array.
The statement which most accurately describes the time needed for operations on these data structures is: C. Finding a given word is faster in II than in I.
What is a binary search?Binary search can be defined as an efficient algorithm that is designed and developed for searching an element (information) from a sorted list of data, especially by using the run-time complexity of Ο(log n)
Note: n is the total number of elements.
In Computer science, Binary search typically applies the principles of divide and conquer. Thus, to perform a binary search on an array, the array must first be sorted in an alphabetical or ascending order.
In conclusion, the statement which most accurately describes the time needed for operations on these data structures is that, finding a given word is faster in data structure II than in I.
Read more on data structure here: https://brainly.com/question/24268720
You are a Data Scientist at Anthem Blue Cross Blue Shield. You want to check if a patient will develop diabetes. Please write the R code to split the dataframe into test and training data. The proportion of split is 85/15, and the sample stratification needs to be done on the variable - age.
Answer:
666
Explanation:
You are a Data Scientist at Anthem Blue Cross Blue Shield. You want to check if a patient will develop diabetes. Please write the R code to split the dataframe into test and training data. The proportion of split is 85/15, and the sample stratification needs to be done on the variable
Can two computers be assigned to one IP address
Answer:
two computers cannot have the same public (external) IP address unless they are connected via the same router. If they are connected via the same router, then they can have (share) the same public IP address yet have different private (local) IP addresses
Explanation:
Answer: maybe
Explanations: two computers cannot have the same public (external) IP address unless they are connected via the same router. If they are connected via the same router, then they can have (share) the same public IP address yet have different private (local) IP addresses.
If D3=30 and D4=20, what is the result of the function
=IF(D4 D3, D3-D4, "FULL")?
0-10
O Unknown
O 10
O Full
Answer:
c. 10
Explanation:
Given
[tex]D3 = 30[/tex]
[tex]D4 = 20[/tex]
Required
The result of: [tex]=IF(D4 < D3,D3-D4,"FULL")[/tex]
First, the condition D4 < D3 is tested.
[tex]D4 < D3 = 20 < 30[/tex]
Since 20 < 30, then:
[tex]D4 < D3 = True[/tex]
The condition is true, so:
D3 - D4 will be executed.
[tex]D3 - D4 = 30 - 20[/tex]
[tex]D3 - D4 = 10[/tex]
Hence, the result of the function is 10
What should a valid website have?
Select one:
a. Cited sources, copyright, and a clear purpose
b. Cited sources, copyright, and a poor design
c. Cited sources, copyright, and colorful images
d. Cited sources, no copyright, and a broad purpose
Answer:
A. cites sources,copyright,and a clear purpose
QUESTION 1
Which of the following is an example of firewall?
O a. Notepad
b. Bit Defender internet Security
O c. Open Office
O d. Adobe Reader
I need help solving this problem on Picoctf. The question is What happens if you have a small exponent? There is a twist though, we padded the plaintext so that (M ** e) is just barely larger than N. Let's decrypt this: ciphertext. The ciphertext is this. I tried using stack flow and the rsatool on GitHub but nothing seems to work. Do you guys have any idea of what I can do. I need to solve this problem asap
Explanation:
Explanation:
RSA encryption is performed by calculating C=M^e(mod n).
However, if n is much larger than e (as is the case here), and if the message is not too long (i.e. small M), then M^e(mod n) == M^e and therefore M can be found by calculating the e-th root of C.
Write a program that will ask the user for a set of ten numbers. After all ten numbers have been entered, the program will display the largest and smallest numbers of the data set. The program will then prompt the user whether he/she would like to enter another set of data. When the user indicates he/she is finished entering data sets, the program will finally display the average largest number and the average smallest number for all sets entered.
Answer:
In Python:
nums = []
larg= []
small = []
while True:
for i in range(10):
num = int(input(": "))
nums.append(num)
print("Smallest: "+str(min(nums))); print("Largest: "+str(max(nums)))
larg.append(max(nums))
small.append(min(nums))
another = int(input("Press 1 to for another sets: "))
nums.clear()
if not another == 1:
break
print("Average Large: "+str(sum(larg)/len(larg)))
print("Average Small: "+str(sum(small)/len(small)))
Explanation:
This initializes the list of input numbers
nums = []
This initializes the list of largest number of each input set
larg= []
This initializes the list of smallest number of each input set
small = []
This loop is repeated until, it is exited by the user
while True:
The following iteration is repeated 10 times
for i in range(10):
Prompt the user for input
num = int(input(": "))
Add input to list
nums.append(num)
Check and print the smallest using min; Check and print the largest using max;
print("Smallest: "+str(min(nums))); print("Largest: "+str(max(nums)))
Append the largest to larg list
larg.append(max(nums))
Append the smallest to small list
small.append(min(nums))
Prompt the user to enter another set of inputs
another = int(input("Press 1 to for another sets: "))
Clear the input list
nums.clear()
If user inputs anything other than 1, the loop is exited
if not another == 1:
break
Calculate and print the average of the set of large numbers using sum and len
print("Average Large: "+str(sum(larg)/len(larg)))
Calculate and print the average of the set of smallest numbers using sum and len
print("Average Small: "+str(sum(small)/len(small)))
What is software and explain the five types of software
Question: What is software and explain the five types of software
Explanation: The system software which is controlled and managed by the use of set of instructions and programs is called software.
Ex: Windows 7/8/10/xp etc...
the types of software are'
system software and application software
Android.
CentOS.
iOS.
Linux.
Mac OS.
MS Windows.
Ubuntu.
Unix.
Answer:
What is system software and explain its types?
System Software
A system software aids the user and the hardware to function and interact with each other. Basically, it is a software to manage computer hardware behavior so as to provide basic functionalities that are required by the user.
explain the different type of shift register counter
Answer:
Shift registers are also used as counters. There are two types of counters based on the type of output from right most D flip-flop is connected to the serial input. Those are Ring counter and Johnson Ring counter.
There are two types of shift register counters. They are given below:
Ring counter.Johnson ring counter. What do you mean by Shift register counter?The shift register counter may be defined as a sequence of a specific number of core registers that are significantly interconnected to one another in order to provide a clock-driven data shift.
A shift register is a set of f FFs that can be connected within the series and the stored data can be moved in the registers sequentially as per the command or instruction is given.
They are also utilized as counters. The type of shift register counter is based on the output from the D flip-flop which is connected to the serial input from the rightmost side.
Therefore, the two types of shift register counters are well mentioned above.
To learn more about Shift register, refer to the link:
https://brainly.com/question/14096550
#SPJ6
my code get an input of 1900 and it should output not a leap year but it fails first line of code. It should output not a Leap any number with 1500 not divisble by 4 with/out a remainder should output (not a leap year. )
input_year = int(input())
if input_year % 4 == 0: #fails on this step, 1900 should be false
print(input_year, "- is Leap Year")
elif input_year % 100 == 0:
print(input_year, "- leap year")
elif input_year % 400 ==0:
print(input_year, "is a leap year")
else:
print(input_year, "- not a leap year")
Answer:
Explanation:
The code does not fail on the first step since 1900 divided by 4 is actually 475 and has no remainder, meaning that it should return True. The code won't work because the if statements need to be nested in a different format. The correct algorithm would be the following, which can also be seen in the picture attached below that if we input 1900 it would output is not a leap year as it fails on the division by 400 which gives a remainder of 0.75
input_year = int(input())
if input_year % 4 == 0:
if input_year % 100 == 0:
if input_year % 400 == 0:
print(input_year, "is a leap year")
else:
print(input_year, "- not a leap year")
else:
print(input_year, "is a leap year")
else:
print(input_year, "- not a leap year")
What is the proper order for the fetch-execute cycle?
Control Unit – controls all parts of the computer system. It manages the four basic operations of the Fetch Execute Cycle as follows:
Fetch – gets the next program command from the computer’s memory
Decode – deciphers what the program is telling the computer to do
Execute – carries out the requested action
Store – saves the results to a Register or Memory
Arithmetic Logic Unit (ALU) – performs arithmetic and logical operations
Register – saves the most frequently used instructions and data
Which of the following is necessary to appreciate features provided by software applications?
a package
O a basic understanding
O a basis of comparison
O coding concepts
Answer: a basic understanding
Explanation:
In other to appreciate the features that an application has, one must have a basic understanding of what the software is meant to do. That way, when the software does this duty, the person will recognize it and appreciate the software.
For instance, a person who does not understand the basic premise of Quickbooks will not be able to appreciate the various features provided by Quickbooks to make accounting easier for small to medium businesses.
Write a program that lets the user enter the loan amount and loan period in number of years and displays the monthly and total payments for each interest rate starting from 5% to 8%, with an increment of 1/8.
Answer:
Following are the code to this question:
import java.util.*;//import package
public class Main //defining a class
{
public static void main(String[] axc)//main method
{
double Loan_Amount,years,Annual_Interest_Rate=5.0,Monthly_Interest_Rate,Total_Amount,Monthly_Payment;//defining variables
Scanner ax = new Scanner(System.in);//creating Scanner class object
System.out.print("Enter loan amount:");//print message
Loan_Amount = ax.nextDouble();//input Loan_Amount value
System.out.print("Enter number of years: ");//print message
years= ax.nextInt();//input number of years value
System.out.printf(" %-20s%-20s%-20s\n", "Interest Rate", "Monthly Payment","Total Payment");//print message
while (Annual_Interest_Rate <= 8.0) //use while loop to calculate Interest rate table
{
Monthly_Interest_Rate = Annual_Interest_Rate / 1200;//calculating the interest Rate
Monthly_Payment = Loan_Amount * Monthly_Interest_Rate/(1 - 1 / Math.pow(1 + Monthly_Interest_Rate,years * 12));//calculating monthly payment
Total_Amount = Monthly_Payment * years * 12;//calculating yearly Amount
System.out.printf("\t %-19.3f%-19.2f%-19.2f\n", Annual_Interest_Rate,Monthly_Payment,Total_Amount);//use print meethod to print table
Annual_Interest_Rate = Annual_Interest_Rate + 1.0 / 8;//use Annual_Interest_Rate to increating the yearly Rate
}
}
}
Output:
Please find the attached file.
Explanation:
In this code inside the class, several double variables are declared in which the "Loan_Amount and years" is used for input value from the user-end, and another variable is used for calculating the value.
In this code a while loop is declared that checks the "Annual_Interest_Rate" value and creates the interest rate table which is defined in the image file please find it.
A slide contains three text boxes and three images that correspond to the text boxes. Which option can you use to display a text box with its
image, one after the other, in a timed sequence?
A. transition
В. table
C. animation
D. slide master
E. template
Answer:
animation
Explanation:
Write a client program ClientSorting2 and in the main() method: 1. Write a modified version of the selection sort algorithm (SelectionSorter()) that sorts an array of 23 strings (alphabetically) rather than one of integer values. Print the array before it is sorted in the main() method, then after it is sorted in SelectionSorter().
Answer:
The program in Java is as follows:
import java.util.*;
public class Main{
public static void SelectionSorter(String[] my_array){
System.out.print("\nAfter sort: ");
for (int ind=0; ind < 22; ind++ ){
int min = ind;
for (int k=ind+1; k < 23; k++ )
if (my_array[k].compareTo(my_array[min] ) < 0 ){ min = k; }
String temp = my_array[ind];
my_array[ind] = my_array[min];
my_array[min] = temp; }
for (int j=0; j < 23; j++){ System.out.print(my_array[j]+" ");}
}
public static void main(String[] args) {
Scanner input = new Scanner(System.in);
String [] myarray = new String [23];
for(int i= 0;i<23;i++){ myarray[i] = input.nextLine(); }
System.out.print("Before sort: ");
for ( int j=0; j < 23; j++ ){ System.out.print(myarray[j]+" "); }
SelectionSorter(myarray);
}
}
Explanation:
This defines the function
public static void SelectionSorter(String[] my_array){
This prints the header for After sort
System.out.print("\nAfter sort: ");
This iterates through the array
for (int ind=0; ind < 22; ind++ ){
This initializes the minimum index to the current index
int min = ind;
This iterates from current index to the last index of the array
for (int k=ind+1; k < 23; k++ )
This compares the current array element with another
if (my_array[k].compareTo(my_array[min] ) < 0 ){ min = k; }
If the next array element is smaller than the current, the elements are swapped
String temp = my_array[ind];
my_array[ind] = my_array[min];
my_array[min] = temp; }
This iterates through the sorted array and print each array element
for (int j=0; j < 23; j++){ System.out.print(my_array[j]+" ");}
}
The main begins here
public static void main(String[] args) {
Scanner input = new Scanner(System.in);
This declares the array
String [] myarray = new String [23];
This gets input for the array elements
for(int i= 0;i<23;i++){ myarray[i] = input.nextLine(); }
This prints the header Before sort
System.out.print("Before sort: ");
This iterates through the array elements and print them unsorted
for ( int j=0; j < 23; j++ ){ System.out.print(myarray[j]+" "); }
This calls the function to sort the array
SelectionSorter(myarray);
}
}
While all pages use HTML code, not all pages are written in
Answer:
Code Form
Explanation:
“What is an example of the vocabulary word foreshadow?” This question could be a
a.
Potential question
c.
Flashcards question
b.
Vocabulary definition
d.
Both A and C
Please select the best answer from the choices provided
A
B
C
D
Answer:
D) Both A and C
Explanation:
Answer:
D
Explanation:
What yields 2.5? Type casting
Answer:
5.0/2
Explanation:
I don't do Java, but I do Python. I'm pretty sure the answer to this question is 5.0/2. I'm sorry if I'm wrong.
wassup anybody tryna play 2k
Answer:
u dont want the smoke my boy u dont
Explanation:
Answer:
I only play 24k B)))))))))
what is a . com in a web address mean
Answer:
dot commercial
Explanation:
.edu education
.gov goverment
Answer:
Commercial
Explanation:
NEED HELP ASAP! You are looking for information in the online catalog for your local library. Which field would you not expect to see in a library's catalog or database?
A. Author
B. Title
C. Year
D. Phone number
Answer:
The answer is D
Explanation:
what is subnetting. what does subnetting mean
Answer:
Subnetting is the practice of dividing a network into two or more smaller networks. It increases routing efficiency, enhances the security of the network and reduces the size of the broadcast domain.
Explanation:
Which are the 2 main elements that’s make up computer architecture?
Answer:
Explanation:
Computer architecture is made up of two main components the Instruction Set Architecture (ISA) and the RTL model for the CPU.
Which examples demonstrate common qualifications for Marketing Information Management and Research careers? Check all that apply.
David has the physical strength to lift products on high shelves.
Alessandra analyzes and interprets information she gathered from surveys.
Eve is good at presenting and explaining information to others.
Franklin is a strong leader who is able to motivate others.
Gene is very organized and tracks information accurately and carefully.
Claire is confident and persuasive, which makes her good at selling products.
Answer:
2,3,5
Explanation:
Answer: the answer is 2 3 and 5
Explanation:
Software as a Service (SaaS) allows users to
remotely access which of the following? Check all
of the boxes that apply.
software
data
applications
Answer:
Data software provides the best and most powerful software that allows you in the class
Answer:
software
data
applications
(all)
Explanation:
Ineeedd help please 35 points question
Answer:
1
Explanation:
The four gates on the left are XNOR gates, their output is 1 if both inputs are equal. This is the case (given), so all inputs to the quadruple AND gate are 1, hence the output is also one.