Answer:
Vbg = 20.5 m/s
your velocity with respect to the ground Vbg = 20.5 m/s
Explanation:
Relative velocity with respect to the ground is;
Vbg = velocity of train with respect to the ground + your velocity with respect to the train
Vbg = Vtg + Vbt ......1
Given;
velocity of train with respect to the ground;
Vtg = 19 m/s
your velocity with respect to the train;
Vbt = 1.5 m/s
Substituting the given values into the equation 1;
Vbg = 19 m/s + 1.5 m/s
Vbg = 20.5 m/s
your velocity with respect to the ground Vbg = 20.5 m/s
The density of atmosphere (measured in kilograms/meter3) on a certain planet is found to decrease as altitude increases (as measured from the planet's surface). What type of relationship exists between the altitude and the atmospheric density, and what would the atmospheric density be at an altitude of 1,291 kilometers?
A.
inverse plot, 0.45 kilograms/meter3
B.
inverse plot, 0.51 kilograms/meter3
C.
quadratic plot, 1.05 kilograms/meter3
D.
inverse plot, 1.23 kilograms/meter3
E.
inverse plot, 0.95 kilograms/meter3
' A ' looks like the best choice.
Answer:
B. inverse plot, 0.51 kilograms/meter3
Explanation:
Which person will most likely hear the loudest sound?
A
B
C
D
Answer:
The youngest person
Explanation:
Hearing worsens with age
Please mark brainliest
Answer:
A
Explanation:
The person closest to the origin of the sound will most likely hear the loudest sound. ^^
Calculate the maximum deceleration (in m/s2) of a car that is heading down a 14° slope (one that makes an angle of 14° with the horizontal) under the following road conditions. You may assume that the weight of the car is evenly distributed on all four tires and that the static coefficient of friction is involved—that is, the tires are not allowed to slip during the deceleration.
The question is incomplete. Here is the complete question.
Calculate the maximum deceleration of a car that is heading down a 14° slope (one that makes an anlge of 14° with the horizontal) under the following road conditions. You may assum that the weight of the car is evenlydistributed on all four tires and that the sttic coefficient of friction is involved - that is, the tires are not allowed to slip during the deceleration. (Ignore rolling) Calculate for a car: (a) On a dry concrete. (b) On a wet concrete. (c) On ice, assuming that μs = 0.100, the same as for shoes on ice.
Answer: (a) a = - 11.05 m/s²; (b) a = - 10.64 m/s²; (c) a = - 9.84m/s²
Explanation: The image in the attachment describe the forces acting on the car. Observing that, we know that:
[tex]F_{net}[/tex] = - [tex]W_x[/tex] - [tex]f_s[/tex]
The [tex]W_x[/tex] is a x-component of force due to gravity (W) and, in this case, is given by: [tex]W_x[/tex] = W.sin(14)
W is described as: W = m.g
Force due to friction ([tex]f_s[/tex]) is given by: [tex]f_s[/tex] = μs.N
N is the normal force and, in the system, is equivalent of [tex]W_y[/tex], so:
[tex]W_y[/tex] = m.g.cos(14)
Therefore, the formula will be:
[tex]F_{net}[/tex] = - [tex]W_x[/tex] - [tex]f_s[/tex]
m.a = - (m.g.sin14) - (μs.mg.cos14)
a = - g (sin14 + μscos 14)
a) For dry concrete, μs = 1:
a = - g (sin14 + μscos 14)
a = - 9.8 (sin14 + 1.cos14)
a = - 11.05 m/s²
b) For wet concrete, μs = 0.7:
a = - g (sin14 + μscos 14)
a = - 9.8 (sin 14 + 0.7.cos14)
a = - 10.64 m/s²
c) For ice, μs = 0.1:
a = - g (sin14 + μscos 14)
a = - 9.8 (sin14 + 0.1cos14)
a = - 9.84 m/s²
A car of mass 410 kg travels around a flat, circular race track of radius 83.4 m. The coefficient of static friction between the wheels and the track is 0.286. The acceleration of gravity is 9.8 m/s 2 . What is the maximum speed v that the car can go without flying off the track
Answer:
The maximum speed v that the car can go without flying off the track = 15.29 m/s
Explanation:
let us first lay out the information clearly:
mass of car (m) = 410 kg
radius of race track (r) = 83.4 m
coefficient of friction (μ) = 0.286
acceleration due to gravity (g) = 9.8 m/s²
maximum speed = v m/s
For a body in a constant circular motion, the centripetal for (F) acting on the body is given by:
F = mass × ω
where:
F = maximum centripetal force = mass × μ × g
ω = angular acceleration = [tex]\frac{(velocity)^2}{radius}[/tex]
∴ F = mass × ω
m × μ × g = m × [tex]\frac{v^{2} }{r}[/tex]
410 × 0.286 × 9.8 = 410 × [tex]\frac{v^{2} }{83.4}[/tex]
since 410 is on both sides, they will cancel out:
0.286 × 9.8 = [tex]\frac{v^{2} }{83.4}[/tex]
2.8028 = [tex]\frac{v^{2} }{83.4}[/tex]
now, we cross-multiply the equation
2.8028 × 83.4 = [tex]v^{2}[/tex]
[tex]v^{2}[/tex] = 233.754
∴ v = √(233.754)
v = 15.29 m/s
Therefore, the maximum speed v that the car can go without flying off the track = 15.29 m/s
The starships of the Solar Federation are marked with the symbol of the Federation, a circle, whereas starships of the Denebian Empire are marked with the Empire's symbol, an ellipse whose major axis is n times its minor axis (a=nb in the figure ).
How fast, relative to an observer, does an Empire ship have to travel for its markings to be confused with those of a Federation ship? Use c for the speed of light in a vacuum.
Express your answer in terms of n and c.
Complete question
The complete question is shown on the first uploaded image
Answer:
The velocity is [tex]v = c* \sqrt{1 - \frac{1}{n^2} }[/tex]
Explanation:
From the question we are told that
a = nb
The length of the minor axis of the symbol of the Federation, a circle, seen by the observer at velocity v must be equal to the minor axis(b) of the Empire's symbol, (an ellipse)
Now this length seen by the observer can be mathematically represented as
[tex]h = t \sqrt{1 - \frac{v^2}{c^2} }[/tex]
Here t is the actual length of the major axis of of the Empire's symbol, (an ellipse)
So t = a = nb
and b is the length of the minor axis of the symbol of the Federation, (a circle) when seen by an observer at velocity v which from the question must be the length of the minor axis of the of the Empire's symbol, (an ellipse)
i.e h = b
So
[tex]b = nb [\sqrt{1 - \frac{v^2}{c^2} } ][/tex]
[tex][\frac{1}{n} ]^2 = 1 - \frac{v^2}{c^2}[/tex]
[tex]v^2 =c^2 [1- \frac{1}{n^2} ][/tex]
[tex]v^2 =c^2 [\frac{n^2 -1}{n^2} ][/tex]
[tex]v = c* \sqrt{1 - \frac{1}{n^2} }[/tex]
What's a line of best fit? Will give BRAINLIEST
A line of best fit expresses the relationship between the points.
Explanation:
It does not go through all the points but goes through most of them and it is like a hardrawn curve
HELPP MEE
Which image illustrates the desired interaction of a sound wave with
soundproofing material in a recording studio?
Soundproofing material is required for blocking sound during some works like recording voice in the studio. Image D represents the interaction of a sound wave with soundproofing material in a recording studio.
What is the basis of soundproofing?Soundproofing is done by absorbing the sound. A very much used material for this is a dense foam.
Foam and like materials absorbs sound and it travels directly into the soft surface resulting in soundproofing.
Thus, the correct option is C, as the D image is showing the absorption.
For more details regarding soundproofing, visit:
https://brainly.com/question/8980142
#SPJ2
Answer: C.D
Explanation:...
A block is supported on a compressed spring, which projects the block straight up in the air at velocity VVoj The spring and ledge it sits on then retract. You can win a prize by hitting the block with a ball. When should you throw the ball and in what direction to be sure the ball hits the block?
A. At the instant when the block is at the highest point, directed at the spring.
B. At the instant when the block is at the highest point, directed at the block.
C. At the instant when the block leaves the spring, directed at the spring.
D. At the instant when the block leaves the spring, directed at the block.
E. When the block is back at the spring's original position, directed at that position.
Answer:
the correct answer is B
Explanation:
We analyze this exercise a little, the block goes into the air and is under the acceleration of gravity. The ball is fired by the hand and is describing a parabolic movement, subjected to the acceleration of gravity.
For the ball to hit the block we must have the distance the ball goes up equal to the distance the block moves, therefore we must shoot the ball at the block at its highest point.
Let's write the kinematic equation for the two bodies
The block. At the highest point of the path
y = - ½ g t2
The ball, in its vertical movement
y = vo t - ½ g t2
therefore the correct answer is B
Why do bears activity increase as certain points during the day
Because they are well rested and have to work to get food in their system.
If radio waves are used to communicate with an alien spaceship approaching Earth at 10% of the speed of light c, the aliens would receive our signals at speed of:_______.
a. 0.99c
b. 1.10c
c. 1.00c
d. 0.90c
e. 0.10c
Answer:
3×10^7 m/s or 0.10c (e)
Explanation: If the actual value of the speed of light were to be put into consideration.
Given that the speed of light is c = 3.0×10^8m/s
The alien spaceship is approaching at the rate of 10% of the speed of light.
10% of 3.0×10^8m/s
10/100 × 3.0×10^8m/s
0.1 ×3.0×10^8m/s
3×10^7 m/s. Which is the same thing as 0.1 of c = 0.1×c
Answer: 1.00c
Explanation: I got it correct on the homework
A driver wearing a seat beat decelerates at roughly the same rate as the car it self. Since many modern cars have a "crumble zone" built into the front of the car, let us assume that the car decelerates of a distance of 0.9 m. What is the net force acting on a 65 kg driver who is driving at 18 m/sec and comes to rest in this distance
Answer:
11,700Newton
Explanation:
According to Newton's second law, Force = mass × acceleration
Given mass = 65kg.
Acceleration if the car can be gotten using one of the equation of motion as shown.
v² = u²+2as
v is the final velocity = 18m/s
u is the initial velocity = 0m/s
a is the acceleration
s is the distance travelled = 0.9m
On substitution;
18² = 0²+2a(0.9)
18² = 1.8a
a = 324/1.8
a = 180m/²
Net force acting on the body = 65×180
Net force acting on the body = 11,700Newton
How many significant figures does 0.09164500561 have?
Answer:
10 Sig Figs
Explanation:
Just start counting at the first non zero after the decimal so in this case the nine, and count all of the numbers including zeros after that.
A physics major is cooking breakfast when he notices that the frictional force between the steel spatula and the Teflon frying pan is only 0.400 N. Knowing the coefficient of kinetic friction between the two materials (0.04), he quickly calculates the normal force. What is it (in N)? N
Answer:
normal force = 10 N
Explanation:
Given data
frictional force = 0.400 N
coefficient of kinetic friction = 0.04
Solution
we get here normal force that is express as
normal force = [tex]\frac{Frictional\ force}{coefficient\ of\ friction}[/tex] ............1
put here value and we will get value
normal force = [tex]\frac{0.400}{0.04}[/tex]
solve it we get
normal force = 10 N
Astrophysicist Neil deGrasse Tyson steps into an elevator on the 29th floor of a skyscraper. For some odd reason, there is a scale on the floor of the elevator. Neil, whose mass is about 115 kg, decides to step on the scale and presses the button for a lower floor. The elevator starts traveling downwards with a constant acceleration of 1.5 m/s2 for 6.0 seconds, and then travels at a constant velocity for 6.0 seconds. Finally, the elevator has an upward acceleration of 1.5 m/s2 for 6.0 seconds as it comes to a stop.
A. If each floor is approximately 4 m tall, which floor does the elevator stop at?
B. If the mass of the elevator is 1,200 kg, what is the maximum tension of the elevator cable?
Answer:
A. Final Floor = 15.5 = 15 (Considering downward portion of elevator)
B. T = 14859.5 N = 14.89 KN
Explanation:
A.
First we calculate distance covered by the elevator during downward motion. Downward motion consists of two parts. First one is uniformly accelerated. For that part we use 2nd equation of motion:
s₁ = Vi t + (0.5)at²
where,
s₁ = distance covered during accelerated downward motion = ?
Vi = initial speed = 0 m/s (since elevator is initially at rest)
t = time taken = 6 s
a = acceleration = 1.5 m/s²
Therefore,
s₁ = (0 m/s)(6 s) + (0.5)(1.5 m/s²)(6 s)²
s₁ = 4.5 m
also we find the final velocity using 1st equation of motion:
Vf = Vi + at
Vf = 0 m/s + (1.5 m/s²)(6 s)
Vf = 9 m/s
Now, the second part of downward motion is with constant velocity. So:
s₂ = vt
where,
s₂ = distance covered during constant speed downward motion = ?
v = Vf = 9 m/s
t = 6 s
Therefore,
s₂ = (9 m/s)(6 s)
s₂ = 54 m
Now for distance covered during upward motion is given by the 2nd equation of motion. Since the values of acceleration and time are same. Therefore, it will be equal in magnitude to s₁:
s₃ = s₁ = 4.5 m
Therefore, the total distance covered by elevator is given by following equation:
s = s₁ + s₂ - s₃ (Downward motion taken positive)
s = 4.5 m + 54 m - 4.5 m
s = 54 m
Therefore, net motion of the elevator was 54 m downwards.
So the final floor will be:
Final Floor = Initial Floor - Distance Covered/Length of a floor
Final Floor = 29 - 54 m/4m
Final Floor = 15.5 = 15 (Considering the downward portion or floor of elevator)
B.
The maximum tension will occur during the upward accelerated motion. It is given by the formula:
T = m(g + a)
where,
T = Max. Tension in Cable = ?
m = total mass of person and elevator = 115 kg + 1200 kg = 1315 kg
g = 9.8 m/s²
a = acceleration = 1.5 m/s²
Therefore,
T = (1315 kg)(9.8 m/s² + 1.5 m/s²)
T = 14859.5 N = 14.89 KN
Some cats can be trained to jump from one location to another and perform other tricks. Kit the cat is going to jump through a hoop. He begins on a wicker cabinet at a height of 1.765 m above the floor and jumps through the center of a vertical hoop, reaching a peak height 3.130 m above the floor. (Assume the center of the hoop is at the peak height of the jump. Assume that +x axis is in the direction of the hoop from the cabinet and +y axis is up. Assume g = 9.81 m/s2.)
(a) With what initial velocity did Kit leave the cabinet if the hoop is at a horizontal distance of 1.560 m from the cabinet?
v_0 = m/s
(b) If Kit lands on a bed at a horizontal distance of 3.582 m from the cabinet, how high above the ground is the bed?
m
Answer:
a. the initial velocity of the cat is 5.95 m/s at 60.2° from the horizontal
b. 0.847 m
Explanation:
a. Using v² = u² + 2as, we find the initial vertical velocity of the cat. Now at the peak height, v = final velocity = 0, u = initial velocity and a = -g = 9.8 m/s², s vertical distance travelled by the cat from its position on the cabinet = Δy = 3.130 m - 1.765 m = 1.365 m.
Substituting these variables into the equation, we have
0² = u² + 2(-9.8m/s²) × 1.365 m
-u² = -26.754 m²/s²
u = √26.754 m²/s²
u = 5.17 m/s
To find its initial horizontal velocity, u₁ we first find the time t it takes to reach the peak height from
v = u + at. where the variables mean the same as above.
substituting the values, we have
0 = 5.17 m/s +(-9.8m/s²)t
-5.17 m/s = -9.8m/s²t
t = -5.17 m/s ÷ (-9.8m/s²)
= 0.53 s
Now, the horizontal distance d = u₁t = 1.560 m
u₁ = d/t = 1.560 m/0.53 s = 2.96 m/s
So, the initial velocity of the cat is V = √(u² + u₁²)
= √((5.17 m/s)² + (2.96 m/s)²)
= √(26.729(m/s)² + 8.762(m/s)²)
= √(35.491 (m/s)²)
= 5.95 m/s
its direction θ = tan⁻¹(5.17 m/s ÷ 2.96 m/s) = 60.2°
So, the initial velocity of the cat is 5.95 m/s at 60.2° from the horizontal
(b)
First, we find the time t' it takes the cat to land on the bed from d' = u₁t'
where d' = horizontal distance of cabinet from bed = 3.582 m
u₁ = horizontal velocity = 2.96 m/s
t' = d'/u₁
= 3.582 m/2.96 m/s
= 1.21 s
The vertical between the bed and cabinet which is the vertical distance moved by the cat is gotten from Δy = ut' +1/2at'²
substituting u = initial vertical velocity = 5.17 m/s, t' = 1.21 s and a = -g = -9.8 m/s² into Δy, we have
Δy = ut' +1/2at'² = 5.17 m/s × 1.21 s +1/2(- 9.8 m/s²) × (1.21 s)² = 6.256 - 7.174 = -0.918 m
Δy = y₂ - y₁
Since our initial position is the position of the cabinet above the ground = y₁ = 1.765 m
y₂ = position of bed above ground.
Δy = y₂ - y₁ = -0.918 m
y₂ - 1.765 m = -0.918 m
y₂ = 1.765 m - 0.918 m
= 0.847 m
ii.
The drift velocity
(b) A 1800w toaster, a 1.3KW electric frying pan, and a 100w lamp are plugged to the same
20A, 120V circuit.
i.
What current is drawn by each device and what is the resistance of each device?
State whether this combination will blow the fuse or not.
Answer:
toaster -- 15 A, 8 Ωfry pan -- 10.83 A, 11.08 Ωlamp -- 0.83 A, 144 Ωfuse will blowExplanation:
P = VI
I = P/V = P/120
R = V/I = V/(P/V) = V^2/P = 14400/P
Toaster: I = 1800/120 = 15 . . . amps
R = 14400/1800 = 8 . . . ohms
Fry pan: I = 1300/120 = 10.833 . . . amps
R = 14400/1300 = 11.08 . . . ohms
Lamp: I = 100/120 = 0.833 . . . amps
R = 14400/100 = 144 . . . ohms
The total current exceeds 20 A, so will blow the fuse.
A constant force applied to object A causes it to accelerate at 5 m/s2. The same force applied to object B causes an acceleration of 3 m/s2. Applied to object C, it causes an acceleration of 7 m/s2.
A. Which object has the largest mass?B. Which object has the smallest mass?C. What is the ratio of mass A to mass B?
Answer:
(A) object B has the largest mass because it has the least acceleration
(B) object C has the smallest mass because it has the largest acceleration
(C) mass A : mass B = 3 : 5
Explanation:
Given;
acceleration of object A = 5 m/s²
acceleration of object B = 3 m/s²
acceleration of object C = 7 m/s²
A constant force, F
According to Newton's second law of motion;
F = ma
m = F / a
Mass of object A:
m = F / 5
Mass of object B:
m = F / 3
Mass of object C:
m = F / 7
(A). Which object has the largest mass:
object B has the largest mass because it has the least acceleration
(B). Which object has the smallest mass:
object C has the smallest mass because it has the largest acceleration
(C). What is the ratio of mass A to mass B;
mass A = F / 5
mass B = F / 3
[tex]mass \ A : \ mass \ B = \frac{F}{5} : \frac{F}{3} \\\\\frac{mass \ A}{mass \ B} = \frac{F}{5} * \frac{3}{F}= \frac{3}{5} \\\\mass \ A : \ mass \ B = 3: 5[/tex]
A. The Object B has largest mass.
B. The Object A has smallest mass.
C. The ratio of mass A to mass B is, [tex]\frac{3}{5}[/tex]
Newton second law of motion:The second law states that the acceleration of an object is dependent upon two variables - the net force acting upon the object and the mass of the object.
[tex]F=ma\\\\m=\frac{F}{a}[/tex]
For constant force, mass is inversely proportional to acceleration of object.Given that, acceleration of object A is [tex]5m/s^{2}[/tex] and object B is [tex]3m/s^{2}[/tex]Thus, Object B has largest mass.Object A has smallest mass.the ratio of mass A to mass B is,[tex]\frac{m_{A}}{m_{B}} =\frac{a_{B}}{a_{A}} =\frac{3}{5}[/tex]
Learn more about the acceleration of object here:
https://brainly.com/question/460763
How much work is done by 0.30 m of gas if its pressure increases by 8.0 x105 Pa and the volume remains constant
Salerno
Answer:
0
Explanation:
if the volume remains constans, the works is 0 because the equation
W = P . ∆V
P = pressure
∆V = change in volume
Espresso is a coffee beverage made by forcing steam through finely ground coffee beans. Modern espresso makers generate steam at very high pressures and temperatures, but in this problem we'll consider a low-tech espresso machine that only generates steam at 100?C and atomospheric pressure--not much good for making your favorite coffee beverage.The amount of heat Q needed to turn a mass m of room temperature ( T1) water into steam at 100?C ( T2) can be found using the specific heat c of water and the heat of vaporization Hv of water at 1 atmosphere of pressure.Suppose that a commercial espresso machine in a coffee shop turns 1.50 kg of water at 22.0?C into steam at 100?C. If c=4187J/(kg??C) and Hv=2,258kJ/kg, how much heat Q is absorbed by the water from the heating resistor inside the machine?Assume that this is a closed and isolated system.Express your answer in joules to three significant figures.Q = _________________ J
Answer:
Q = 3877 KJ
Explanation:
Since, the system is closed and isolated. Therefore, the law of conservation of energy can be written as:
Heat Absorbed By Water (Q) = Heat required to raise the temperature of water (Q₁) + Heat required to convert water to steam (Q₂)
Q = Q₁ + Q₂ ----- equation (1)
Now, for Q₁:
Q₁ = m C ΔT
where,
m = Mass of Water = 1.5 kg
C = Specific Heat of Water = 4187 J/kg.°C
ΔT = Change in Temperature of Water = T₂ - T₁ = 100°C - 22°C = 78°C
Therefore,
Q₁ = (1.5 kg)(4187 J/kg.°C)(78°C)
Q₁ = 490 x 10³ J =490 KJ
Now, for Q₂:
Q₂ = m H
where,
m = Mass of Water = 1.5 kg
H = Heat of Vaporization of Water = 2258 KJ/kg
Therefore,
Q₂ = (1.5 kg)(2258 KJ/kg)
Q₂ = 3387 KJ
Substituting the values in equation (1), we get:
Q = Q₁ + Q₂
Q = 490 KJ + 3387 KJ
Q = 3877 KJ
physics I need help :(
A metal ring 4.60 cm in diameter is placed between the north and south poles of large magnets with the plane of its area perpendicular to the magnetic field. These magnets produce an initial uniform field of 1.12 T between them but are gradually pulled apart, causing this field to remain uniform but decrease steadily at 0.280 T/s.
A. What is the magnitude of the electric field induced in the ring?
B. In which direction (clockwise or counterclockwise) does the current flow as viewed by someone on the south pole of the magnet?1. Counterclockwise2. Clockwise
Answer:
A. Ein = 8.05*10^-4 V/m
B. Clockwise sense
Explanation:
A. the magnitude of the electric field induced in the ring is obtaind by using the following formula:
[tex]\int E_{in} \cdot ds=-\frac{d\Phi_B}{dt}[/tex] (1)
Ein: induced electric field
ds: differential of a path of the ring
ФB: magnetic flux in the ring
The Ein vector is parallel to ds in the complete ring. Furthermore, the area of the ring is constant, hence, you have in the equation (1):
[tex]\int E_{in}ds=E_{in}(2\pi r)=-A\frac{dB}{dt}\\\\E_{in}=-\frac{A}{2\pi r}\frac{dB}{dt}[/tex] (2)
dB/dt = -0.280T/s (it is decreasing)
A: area of the ring = π(r/2)^2= (π/4) r^2
r: radius of the ring = 4.60/2 = 2.30 cm
Then, you replace the values of all variables in the equation (2):
[tex]E_{in}=-\frac{(\pi/4)r^2}{2\pi r}\frac{dB}{dt}=\frac{r}{8}\frac{dB}{dt}\\\\E_{in}=-\frac{0.0230m}{8}(-0.280T)=8.05*10^{-4}\frac{V}{m}[/tex]
hence, the induced electric field is 8.05*10^-4 V/m
B. The induced current in the ring produced a magnetic field that is opposite to the magnetic field of the magnet. The, in this case you have that the induced current is in a clockwise sense.
g it as been suggested that solar powered space ships could get a boost from a laser either on earth or in orbit around earth. the laser would have to be very powerful to give any measurable benefit to the ship. if the laser produces a 0.18-m diameter beam of 490-nm light, what is the minimum angular spread of the beam?
Answer:
The minimum angular spread of the laser beam is 3.32 × [tex]10^{-6}[/tex] radians (or 3.32 μrad).
Explanation:
The minimum angular spread of a wave is the ratio of its narrowest diameter to its wavelength.
From Rayleigh's formula,
Angular spread = 1.22 (wavelength ÷ diameter)
= 1.22 (λ ÷ D)
Given that:
diameter, D = 0.18 m and wavelength, λ = 490 nm, then;
Angular spread of the laser beam = 1.22 (λ ÷ D)
= 1.22[tex](\frac{490*10^{-9} }{0.18})[/tex]
= 1.22× 2.7222 × [tex]10^{-6}[/tex]
= 3.3211 × [tex]10^{-6}[/tex] rad
The minimum angular spread of the laser beam is 3.32 × [tex]10^{-6}[/tex] radians.
Sr-90 has a half-life of T1/2 = 2.85 a (years). How much Sr-90 will remain in a 5.00 g sample after 5.00 a? Show all of your work. (2 marks)
Answer:
1.48 g
Explanation:
A = A₀ (½)^(t / T)
where A is the final amount,
A₀ is the initial amount,
t is time,
and T is the half life.
A = (5.00 g) (½)^(5.00 a / 2.85 a)
A = 1.48 g
A fuel pump sends gasoline from a car's fuel tank to the engine at a rate of 5.37x10-2 kg/s. The density of the gasoline is 739 kg/m3, and the radius of the fuel line is 3.37x10-3 m. What is the speed at which gasoline moves through the fuel line
Answer:
Speed v = 2.04 m/s
the speed at which gasoline moves through the fuel line is 2.04 m/s
Explanation:
Given;
Mass transfer rate m = 5.37x10^-2 kg/s.
Density d = 739 kg/m3
radius of pipe r = 3.37x10^-3 m
We know that;
Density = mass/volume
Volume = mass/density
Volumetric flow rate V = mass transfer rate/density
V = m/d
V = 5.37x10^-2 kg/s ÷ 739 kg/m3
V = 0.00007266576454 m^3/s
V = 7.267 × 10^-5 m^3/s
V = cross sectional area × speed
V = Av
Area A = πr^2
V = πr^2 × v
v = V/πr^2
Substituting the given values;
v = 7.267 × 10^-5 m^3/s/(π×(3.37x10^-3 m)^2))
v = 0.203678639672 × 10 m/s
v = 2.04 m/s
the speed at which gasoline moves through the fuel line is 2.04 m/s
The current through an inductor of inductance L is given by I(t) = Imax sin(ωt).
(a) Derive an expression for the induced emf in the inductor as a function of time.
(b) At t = 0, is the current through the inductor increasing or decreasing?
(c) At t = 0, is the induced emf opposing or aiding the flow of the charge carriers? (Remember that the direction of a positive induced emf is the same as the current direction and the direction of a negative induced emf is opposite the current direction.)
(d) How are the answers to parts b and c consistent with the behavior of inductors discussed in the text?
Answer:
(a) [tex]emf_L=-LI_{max}\omega cos(\omega t)[/tex]
(b) neither increasing or decreasing
(c) opposite to the flow of charge carriers
Explanation:
The current through an inductor of inductance L is given by:
[tex]I(t)=I_{max}sin(\omega t)[/tex] (1)
(a) The induced emf is given by the following formula
[tex]emf_L=-L\frac{dI}{dt}[/tex] (2)
You derivative the expression (1) in the expression (2):
[tex]emf_L=-L\frac{d}{dt}(I_{max}sin(\omega t))\\\\emf_L=-LI_{max}\omega cos(\omega t)[/tex]
(b) At t=0 the current is zero
(c) At t = 0 the emf is:
[tex]emf_L=-\omega LI_{max}[/tex]
w, L and Imax have positive values, then the emf is negative. Hence, the induced emf is opposite to the flow of the charge carriers.
(d) read the text carefully
At t zero, the current through the inductor neither increasing nor decreasing because current is zero.
The current through an inductor of inductance L can be calculated by
[tex]\bold {I_t = I_m_a_x sin (\omega t)}[/tex].........1
(a) The induced emf can be calculated by
[tex]\bold {emf_L = - L \dfrac {dI}{dt}}[/tex]............2
Derivative the equation (1) in the equation (2)
[tex]\bold {emf _L= -L \dfrac {d (I _m_a_x sin (\omega t)} {dt}}\\\\\bold {emf _L= -L (I _m_a_x \omega cos( \omega t) }[/tex]
(b) At t=0 the current is zero,
(c) At t = 0 the emf is:
[tex]\bold {emf_L = -\omega LI _m_a_x}[/tex]
Therefore, at t zero, the current through the inductor neither increasing nor decreasing because current is zero.
To know more about inductance,
https://brainly.com/question/17431388
As your bus rounds a flat curve at constant speed, a package with mass 0.900 kg , suspended from the luggage compartment of the bus by a string 50.0 cm long, is found to hang at rest relative to the bus, with the string making an angle of 30.0 â with the vertical. In this position, the package is 55.0 m from the center of curvature of the curve.
Required:
a. What is the radial acceleration of the bus?
b. What is the radius of the curve?
Answer:
a.[tex]5.66ms^{-2}[/tex]
b.55 m
Explanation:
We are given that
Mass ,m=0.9 kg
Length of string,l=50 cm=[tex]\frac{50}{100}=0.50 m[/tex]
1 m=100 cm
[tex]\theta=30^{\circ}[/tex]
R=55 m
a.Centripetal acceleration
[tex]a_c=gtan\theta[/tex]
[tex]a_c=9.8tan30^{\circ}[/tex]
[tex]a_c=5.66 m/s^2[/tex]
Hence, the radial acceleration of the bus=[tex]5.66m/s^2[/tex]
b. Radius of curve,R=55 m
A 2 kg car moving towards the right at 4 m/s collides head on with an 8 kg car moving towards the left at 2 m/s, and they stick together. After the collision, the velocity of the combined bodies is:_____________.
a) 2.4 m/s towards the left.
b) 2.4 m/s towards the right.
c) 0.8 m/s towards the left.
d) 0
e) 0.8 m/s towards the right.
Answer:
correct answer is c
v = -0.8 m / s
Explanation:
This is a problem of quantity of movement, for this we must define a system formed by the two cars, so that the forces during the collision are internal and therefore the quantity of movement is conserved
initial
p₀ = m₁ v₁ - m₂ v₂
final
= (m₁ + m₂) v
We have taken the direction to the right as positive
p₀ =p_{f}
m₁ v₁ - m₂ v₂ = (m₁ + m₂) v
v = (m₁ v₁ - m₂ v₂) / (m₁ + m₂)
we calculate
v = (2 4 - 8 2) / (2 + 8)
v = (8 -16) / 10
v = -0.8 m / s
the negative sign indicates that the set is moving to the left
correct answer is c
Two carts undergo an inelastic collision where they stick together. Cart A has an initial velocity v0, and the second cart B is initially at rest. After the collision, it is observed that the ratio of the final kinetic energy system to its initial kinetic energy is KfK0= 1/6. Determine the ratio of the carts' masses, mBmA. (Assume the track is frictionless.)
Answer:
Explanation:
Initial kinetic energy of the system = 1/2 mA v0²
If Vf be the final velocity of both the carts
applying conservation of momentum
final velocity
Vf = mAvo / ( mA +mB)
kinetic energy ( final ) = 1/2 (mA +mB)mA²vo² / ( mA +mB)²
= mA²vo² / 2( mA +mB)
Given 1/2 mA v0² / mA²vo² / 2( mA +mB) = 6
mA v0² x ( mA +mB) / mA²vo² = 6
( mA +mB) / mA = 6
mA + mB = 6 mA
5 mA = mB
mB / mA = 5 .
can a body be in equilibrium if only one external force act on its ? explain
Answer:
Explanation:
If there is only 1 force, the body can never be in equilibrium, providing that the force is not zero (and that would hardly be a force. Zero is possible in math and it means something. It is debatable in physics).
You cannot think of a condition where something is stationary on planet earth and there are not 2 forces or more forces involved.
Think of something like a block of wood sitting on a table. It is not moving, we'll say. Gravity is holding it down, but what is pushing up on it?
The table is. There are 2 forces and they are equal in magnitude, but opposite in direction. That matters.
Question 7 of 10
The coefficient of kinetic friction between a couch and the floor is 0.4. If the
couch has a mass of 35 kg and you push it with a force of 200 N. what is the
net force on the couch as it slides?
O A. 337 N
B. 143 N
O C. 343 N
O D. 63 N
Answer:
D
Explanation:
Now the net force is the applied force minus the frictional force; this is expressed mathematically as:
Fnet= Fappplied - Ffrictional
Now the frictional force is given as ;
Coefficient of friction × normal reaction
Normal reaction is the weight of the human acting in opposite direction.
Normal reaction of the human is ;
35 × 9.8 = 343N { note that weight = m× g and g= 9.8m/S2, a known standard }
Hence the Frictional force =343×0.4 =137.20N
Hence Fnet = 200-137.20 = 62.8N
Fnet = 63N to the nearest whole
The net force on the couch as it slides is 63N.
What is frictional force?
When an object is moving on a rough surface, it experiences opposition. This opposing force is called the friction force.
The friction force is given by
f = coefficient of friction x Normal force
Given, the coefficient of kinetic friction between a couch and the floor is 0.4. If the couch has a mass of 35 kg and you push it with a force of 200 N.
Normal reaction is the weight of the human acting in opposite direction.
Normal reaction N =35 × 9.8 = 343N
Frictional force f =0.4 x 343
f =137.20N
The net force will be
Fnet= Fappplied - Ffrictional
Fnet = 200-137.20 = 62.8N
Fnet = 63N
Thus, the net force on the couch as it slides is 63N.
Learn more about friction force.
https://brainly.com/question/1714663
#SPJ2