Answer:
In physics, motion means a continuous change in the position of a body relative to a reference point, as measured by a particular observer in a particular frame of reference.
Explanation:
Which metals will switch in this single replacement reaction Zn + MgO -->
a. Mg and Zn
b. Zn and O
c. Mg and O
d. This is not a single replacement reaction
Answer:
D
Explanation:
Magnesium is more reactive than zinc so no reaction will take place
Which term describes something that displays all the characteristics of life?
a.homeostasis
b.organism
c.stimulus
d.unicellular
In an experiment, 135.2 grams of a mystery metal is heated to 100.0*C. The metal is then dumped into a calorimeter with 59.0 grams of water at 26.0*C. The temperature of the water in the calorimeter increases to 35.0*C after the metal is dumped into it. What is the specific heat capacity of the metal? Express your answer to 2 past the decimal. Do NOT include units
How many molecules of N204 are in 85.0 g of N2O4?
Answer:
5.56 x 10^23
Explanation:
Just convert and cancel out.
85 g N2O4 x 1 mol/92.01 g x 6.02 x 10^23 molecules /1 mol
From these four cycles which are water cycle, carbon cycle, nitrogen cycle, and phosphorus cycle which cycle has more nutrients
Answer:
Nitrogen cycle
Explanation:
are two double bonds in
uble dash.
:0=C=O
NO2-
Answer:
Yes
Explanation:
There are in double dash :) ( = )
Answer:
yes
Explanation:
Because the double dash shows a double bond it simply means that two electrons from each atom are being shared
thesis: physical science improves nursing through technology, energy, and Matter.
write a 4-page essay explaining how science improves Nursing career and how it revolves around
Technology
Energy
Matter
Answer:
When science educators teach nurses, their primary aim should be to help them to develop understanding of their world of nursing. From a study of registered nurses' conceptions of the physical science underlying their clinical practice, we assert that nurses' understanding of the physical sciences is inadequate in terms of the competencies required of them as nurses.
Explanation: Hopes this helps You A lot :-D
define the term semiconductor and give an example of a metalloid
Answer:
A metalloid is a chemical element that exhibits some properties of metals and some of nonmetals.The closer you get to the zone, the more blurred the properties become. Metalloids tend to be semiconductors; silicon is the best known example of a semiconductor. Most microchips and microprocessors are made with silicon.
Explanation:
That is what i know on the answer
To solve this we must be knowing each and every concept related to metalloid. Therefore, in above given ways semiconductor can be defined.
What is metalloid?Metalloids are chemical elements with physical and chemical characteristics that fall between between metal and nonmetal.
A metalloid is indeed a chemical element with characteristics of both metals and nonmetals. The properties grow increasingly blurred as you move closer to the zone. The seven most well-known metalloids are boron, germanium, silicon, antimony, arsenic, tellurium, and polonium.
Metalloids are often semiconductors, with silicon being the most well-known example. Silicon is used to make the majority of microchips and microprocessors.
Therefore, in above given ways semiconductor can be defined.
To know more about metalloid, here:
https://brainly.com/question/2548493
#SPJ2
K(+1)Cl(+5)O3(-2) → K(+1)Cl(-1) + O2(0)
Answer:
Looooolllllllllllll
Explanation:
What is the question bro
2. What organelle in plant cells makes it possible for plants to carry out photosynthesis?
a. cell wall
b. chloroplast
C. lysosome
d. nucleus
For each pair of covalently bonded atoms, choose the one expected to have the shortest bond length. (A) C-I (B) H-I ...... (A,B) fill in the blank 1 (C) H-Cl (D) H-I ...... (C,D) fill in the blank 2
Answer:
i) B
ii) D
Explanation:
Bond length is determined by the size of the atoms involved and the bond order
A) C-I
B) H-I
answer : H-I has the shortest bond length because H has an electronegativity value of 2.2 while C has an electronegativity value of 2.5 hence the bond between H-I is greater than C - I due the electronegativity difference between H-I is greater as well.
C) H-Cl
D) H-I
answer : H-Cl has the shortest bond length due the electronegativity difference between H-CI is greater as well.
What are the products for
Answer:
[tex]ZnCO_3(s)+2KNO_3(aq)[/tex]
Explanation:
Hello there!
In this case, for the referred reactants side, we can evidence that this is a double displacement reaction whereby Zn gets bonded with CO3 and therefore K gets bonded with NO3 to yield:
[tex]Zn(NO_3)_2+K_2CO_3\rightarrow ZnCO_3+2KNO_3[/tex]
Whereas the KNO3 product is aqueous and the ZnCO3 is solid due to the corresponding solubility rules. Thereby, the answer is the third one.
Regards!
The trait that seems to fade into the background.
Dominant
Recessive
why are electrical wires covered with plastic coating
Answer:
For safety.
Explanation:
Because uncovered wires are conductors, an electric current could damage someone if touched. Plastic and rubber are insulators, meaning that current cannot pass through them.
What is one way humans can preserve biodiversity
Answer:
Reducing the amount of water you use, by having a 5-minute shower or not running the water when washing up the dishes, can help protect vital wetlands. Plant scientists are also working to help conserve by developing crop varieties that use less water.
Explanation:
Answer:
1. Most of the endangered organisms may represent a source of income.
2. The conservation or preservation may conflict with morals.
3. The role of the species or organisms might not be understood.
Explanation:
Biodiversity simply means the amount or number of living organisms that exist in the world.
The practice of protecting these existing living organisms for specific known purposes is regarded as the preservation or conservation of biodiversity.
This process or practice of preserving biodiversity is important to meet most of the human needs, such as generating income, source of food and fuel among others.
HELPPPP ASAP!!! Plzzz
Answer:
420 miles
Explanation:
From the question given above, the following data were obtained:
Time = 3.5 hours
Speed = 120 mi/h
Distance =?
Speed is defined as the distance travelled per unit time. Mathematically, it is expressed as:
Speed = distance / time
With the above formula, we can obtain the distance travelled by the plane as follow:
Time = 3.5 hours
Speed = 120 mi/h
Distance =?
Speed = distance / time
120 = distance / 3.5
Cross multiply
Distance = 120 × 3.5
Distance = 420 miles
Thus, the distance travelled by the plane is 420 miles
Do nitrates always form precipitates?
Answer:
Nitrates compared to sulphates are much more soluble therefore won't form precipitates easily.
The spinning of Earth on its axis is an example of its ________.
Answer:
rotation
Explanation:
Answer:
Rotation
Explanation:
Earth rotates on it's axis to give us the day and night cycle
A truck accelerates at a rate of 14 m/s2 . The truck weighs 17000 kg. What is the amount of force
necessary for the truck to accelerate at this rate?
Answer:
238000 N
Explanation:
Use F=ma
Mass= 17000 kg
Accel.= 14 m/s²
25 ml of liquid and has a mass of 19 grams. Calculate the density.
Identify the most and the least basic compound in each of the following sets. Leave the remaining answer in each set blank. a) Sodium acetate: _______ Ammonia: _______ Sodium ethoxide: _______ b) Sodium acetate: _______ Sodium chloroacetate: _______ Sodium fluoroacetate: _______ c) Sodium acetate: _______ Sodium methoxide: _______ Sodium phenoxide:
Answer:
The correct answer is -
a) Sodium acetate: least Ammonia: _______ Sodium ethoxide: most
b) Sodium acetate: most Sodium chloroacetate: _______ Sodium fluoroacetate: least
c) Sodium acetate: least Sodium methoxide: most Sodium phenoxide:
Explanation:
A) In this case the basicity can be found by the stability of the base, Sodium acetate is the most stable base due to resonance stabilization of acetate anion. Sodium acetate is the least basic as the lone pair of electrons involved in the resonance here. An ethoxide ion has more electrons to donate an electron pair easily.
Thus, the correct answer is - Sodium acetate is the least basic while sodium ethoxide is the most basic.
B) Fluroacetate gives a very strong acid and the acetate gives the least strong acid among all three as described in case of a), thus, the most basic is acetate and the least is fluoroacetate.
]C) comparing the acidity of the acids formed by the addition of a proton to the anions is an easy and correct way to find the basicity of compounds.
Acetate ion adds a proton ⇒ acetic acid
methoxide adds a proton ⇒ methanol
phenoxide ion adds proton ⇒ phenol
As it is known that the stronger the acid, the weaker is the conjugate base formed by the loss of the proton.
acetic acid is the strongest acid because it can easily give up its proton to form acetate. Methanol is the weakest among all three and hence methoxide anion is the strongest base.
Thus, the correct answer is - sodium acetate is the least basic while sodium methoxide is the most basic.
A reaction vessel for synthesizing ammonia by reacting nitrogen and hydrogen is charged with 5.54 kg of H2 and excess N2. A total of 25.6 kg of NH3 are produced. What is the percent yield of the reaction?
Answer:
81.5
Explanation:
smartworks
5. How many grams of Br is needed to make 1000.g of a 2.0ppm solution?
Answer:
2.0 × 10⁻³ g
Explanation:
Step 1: Given data
Mass of solution: 1000. g (1.000 kg)Concentration of Br₂: 2.0 ppmStep 2: Calculate the mass of Br₂ required to prepare the solution
The concentration of Br₂ is 2.0 ppm, that is, there are 2.0 mg of Br₂ per kilogram of solution. The mass of Br₂ required to prepare 1.000 kg of solution is:
1.000 kg Solution × 2.0 mg Br₂/1 kg Solution = 2.0 mg
Step 3: Convert the mass to grams
We will use the conversion factor 1 g = 1000 mg.
2.0 mg × 1 g/1000 mg = 2.0 × 10⁻³ g
NEED HELP FOR THIS ONE
Answer:
C₆H₁₂O₆ + 6 O₂ = 6 CO₂ + 6 H₂O
2 KO₂ + H₂O = 2 KOH + 1.5 O₂
Explanation:
Let's consider the following unbalanced equation.
C₆H₁₂O₆ + O₂ = CO₂ + H₂O
We will start balancing H atoms (higher atomicity) by multiplying H₂O by 6.
C₆H₁₂O₆ + O₂ = CO₂ + 6 H₂O
Then, we will balance C atoms by multiplying CO₂ by 6.
C₆H₁₂O₆ + O₂ = 6 CO₂ + 6 H₂O
Finally, to get the balanced equation, we will multiply O₂ by 6.
C₆H₁₂O₆ + 6 O₂ = 6 CO₂ + 6 H₂O
---
Let's consider the following unbalanced equation.
KO₂ + H₂O = KOH + O₂
We will multiply KO₂ and KOH by 2 to balance K and H atoms.
2 KO₂ + H₂O = 2 KOH + O₂
Finally, to get the balanced equation, we will multiply O₂ by 1.5.
2 KO₂ + H₂O = 2 KOH + 1.5 O₂
Big assignment please help. Will do anything
gases are really _______ and molecules are full of _______, bouncing around constantly
Answer:Gases are really spread out and the atoms and molecules are full of energy - , bouncing around constantly.
Explanation:
Write a balanced net ionic equation.
Na3PO4(aq) + FeCl3(aq) = NaCl(aq) + FePO4(s)
Explanation:
Na3PO4+ FeCl3 = 3NaCl + FePO4
Hope it will help :)❤
The net ionic equation is found to be balanced by both mass and charge. There are equal masses of each element on the product and reactant sides in a balanced net ionic equation.
What is a net ionic equation?A chemical equation which shows only those elements, compounds, and ions which are directly involved in the chemical reaction is defined as the net ionic equation. The net ionic equation give us information about the ions that exists in aqueous medium.
A net ionic equation does not consider the spectator ions. The ions which do not participate in chemical reactions and are seen on both sides of the reactions are called spectator ions.
The complete ionic equation for the given reaction is:
3Na⁺ (aq) + PO₄³⁻ (aq) + Fe³⁺ (aq) + 3Cl⁻ (aq) → 3Na⁺ (aq) + 3Cl⁻ (aq) + FePO₄ (s)
The net ionic equation is:
PO₄³⁻ (aq) + Fe³⁺ (aq) → FePO₄ (s)
To know more about net ionic equation, visit;
https://brainly.com/question/29299745
#SPJ2
Convert 8.19 x 10-14 moles of gold to atoms.
Answer:
4.932018 × 10¹⁰ atoms
Explanation:
Recall that:
1 mole = 6.022 × 10²³ atoms
To change 8.19× 10⁻¹⁴ moles to atoms;
Then, we have:
= (8.19× 10⁻¹⁴× 6.022 × 10²³ atoms)
= 4.932018 × 10¹⁰ atoms
visible light travels from place to place as a
Answer:
Light can travel in three ways from a source to another location: (1) directly from the source through empty space; (2) through various media; (3) after being reflected from a mirror.
Explanation:
I have a lab report I have to do for Chemistry on Edge, the lab is on Enthalpy.
please let me know if you need further information.
Answer:
I need further information.
Explanation:
Extra information is needed for you to know the correct information.
What is Enthalpy?It is a thermodynamic quantity that is equal to the total heat content of a system. It is equal to the internal energy of the system plus the product of pressure and volume.
Enthalpy is nothing but energy and they are of 4 types in thermodynamics-
1. Internal Energy, U
2. Heat enthalpy, H
3. Helmholtz enthalpy, A
4. Gibb's Free enthalpy, G
The total energy of a system cannot be measured directly because the internal energy contains components that are unknown, not easily accessible, or are not of interest in thermodynamics. Generally, a change in enthalpy is the expression for measurements at constant pressure because it simplifies the information of energy transfer.
Therefore, Extra information is needed for you to know the correct information.
Learn more about Enthalpy, here:
https://brainly.com/question/3393755
#SPJ3