Answer:
16.8768 g
Explanation:
The reaction that takes place is:
2H₂ + O₂ → 2H₂OFirst we convert the mass of hydrogen and oxygen into moles, using their respective molar masses:
H ⇒ 15 g ÷ 1 g/mol = 15 mol HO ⇒ 7.5 g ÷ 16 g/mol = 0.4688 mol OThere are significantly less oxygen moles than hydrogen moles, so oxygen is the limiting reactant.
We calculate the produced moles of water, using the moles of the limiting reactant:
0.4688 mol O * [tex]\frac{2molH_2O}{1molO_2}[/tex] = 0.9376 mol H₂OFinally we convert water moles into grams, using its molar mass:
0.9376 mol H₂O * 18 g/mol = 16.8768 g1 Na2CO3(aq) + 1 CaCl2(aq) → 1 CaCO3(s) + 2 NaCl(aq) 4. Use the balanced chemical equation from the last question to solve this situation: You combine 0.5 grams of Na2CO3 with excess CaCl2. How many grams of NaCl would you expect this reaction to produce? Show all work below.
0.6 g NaCl
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Atomic Structure
Reading a Periodic TableStoichiometry
Using Dimensional AnalysisExplanation:Step 1: Define
[RxN - Balanced] Na₂CO₃ (aq) + CaCl₂ (aq) → CaCO₃ (s) + 2NaCl (aq)
[Given] 0.5 g Na₂CO₃ reacted with excess CaCl₂
Step 2: Identify Conversions
[RxN] Na₂CO₃ → 2NaCl
Molar Mass of Na - 22.99 g/mol
Molar Mass of C - 12.01 g/mol
Molar Mass of O - 16.00 g/mol
Molar Mass of Cl - 35.45 g/mol
Molar Mass of Na₂CO₃ - 2(22.99) + 12.01 + 3(16.00) = 105.99 g/mol
Molar Mass of NaCl - 22.99 + 35.45 = 58.44 g/mol
Step 3: Stoichiometry
Set up: [tex]\displaystyle 0.5 \ g \ Na_2CO_3(\frac{1 \ mol \ Na_2CO_3}{105.99 \ g \ Na_2CO_3})(\frac{2 \ mol \ NaCl}{1 \ mol \ Na_2CO_3})(\frac{58.44 \ g \ NaCl}{1 \ mol \ NaCl})[/tex]Multiply/Divide: [tex]\displaystyle 0.551373 \ g \ NaCl[/tex]Step 4: Check
Follow sig fig rules and round. We are given 1 sig fig.
0.551373 g NaCl ≈ 0.6 g NaCl
An isotope becomes more stable by changing the number of what?
*CHEMISTRY*
An atom was determined to have an electron configuration of 2-5. This atom should have a Lewis dot diagram with....
O 7 dots
O 5 dots
O 2 dots
O 1 dot
One way to determine if a rock sample is metamorphic is by:
a.
finding fossil evidence
c.
noting a crystalline structure in its particles
b.
noticing light and dark color bands
d.
all of the above
One way to determine if a rock sample is metamorphic is by "noticing light and dark color bands."
*The diagram has to do with the question*
Pls help
Look at the activity series and select which two of the following reactions
would happen on their own. (Remember, if the lone element is more active
than the metal in the compound, the lone element will react and replace the
metal in the compound.)
The Activity Series
Most Active
Lithium (Li)
Potassium (K)
Calcium (Ca)
Sodium (Na)
Aluminum (AI)
Zinc (Zn)
Iron (Fe)
Tin (Sn)
Lead (Pb)
(Hydrogen) (H)
Copper (Cu)
Silver (Ag)
Gold (Au)
Least Active
O A. 2Li + ZnBr2 + 2LiBr + Zn
B. 3Ca+ Al2O3 + 2Al + 3Cao
C. Al +3LICI - AlCl3 + 3Li
D. Sn + ZnSe → SnSe + Zn
Answer:
b
Explanation:
because the correct answer
PLEASE HELP ME WILL DO ANYTHING ‼️‼️
A fluorine atom has 9 electrons. Draw the Bohr model for fluorine using the pattern you observe for the Bohr models for hydrogen helium, oxygen and neon
Answer:
In first shell 2 electrons are present and 7 electrons are present in last shell
Explanation:
Which feature forms as a result of conduction between magma and water?
Answer:
h
Explanation:
get into
96.0 g. of a gas occupies 48.0 L at 700.0 mm Hg and 20.0 °C. What is its molecular weight?
Answer:
I hope this helps 52.2 g/mol
Explanation:
1) Solve for the moles using PV = nRT:
n = PV / RT
n = [(700.0 mmHg / 760.0 mmHg atm¯1) (48.0 L)] / [(0.08206 L atm mol¯1 K¯1) (293.0 K)]
n = 1.8388 mol
2) Divide the grams given (96.0) by the moles just calculated above:
96.0 g / 1.8388 mol = 52.2 g/mol
Molecular weight of the gas is 52.2 g/mol.
What is ideal gas equation?Ideal gas equation is a hypothetical equation which tells about the behavior of the gas under standard condition and it ca be described as:
PV = nRT, where
P = pressure = 700.0 mm Hg (given)
V = volume = 48.0 L (given)
R = universal gas constant = 0.08206 L atm mol¯¹ K¯¹
T = temperature = 20.0 °C = 293 K
On putting theses values in the above equation we get for moles is as:
n = (700 × 48) / (0.08206 × 293) = 1.8 moles
We know that moles can be represented as:
n = W / M, where
W = given weight = 96g
M = molecular weight = to find?
Putting values in the mole equation, we get
M = 96 / 1.8 = 52.2 g/mol
Hence, molecular weight of gas is 52.2 g/mol.
To know more about ideal gas equation, visit the below link:
https://brainly.com/question/1056445
Need Help On this one two anybody !! pls
Answer:
26. Single Displacement
27. Synthesis
28. Decomposition
29. Combustion
30. Double Displacement
31. Combustion
32. Double Displacement
33. Decomposition
Explanation:
Hope it helped!
The balanced equation for the combustion of ethanol (ethyl alcohol) is: C2H5OH(l) + 3O2(g) ---> 2CO2(g) + 3H2O(g) How many mol of O2 will react with 7 mol of ethanol?
Answer:
21 mol of O₂ will react
Explanation:
Based on the combustion of ethanol:
C₂H₅OH(l) + 3O₂(g) → 2CO₂(g) + 3H₂O(g)
1 mole of ethanol, C₂H₅OH reacts with 3 moles of O₂
With this ratio of 1 mol C₂H₅OH / 3 moles O₂ we can solve the moles of O₂ that react with 7mol of ethanol:
7 mol C₂H₅OH * (3mol O₂ / 1 mol C₂H₅OH) =
21 mol of O₂ will reactWhich reagent is the limiting reagent in a reaction?
A. The one with the largest molar mass
B. The one with the largest coefficient
C. The one with the smallest coefficient D. The one that runs out first in the reaction
Answer:
D. The one that runs out first in the reaction
Explanation:
Limiting reagent is the one that limit the yield of product because of its lower amount and run out first. Lets take an example,
Mass of calcium carbonate = 25 g
Mass of hydrochloric acid = 13.0 g
Mass of calcium chloride produced = ?
Chemical equation:
CaCO₃ + 2HCl → CaCl₂ + H₂O + CO₂
Number of moles of CaCO₃:
Number of moles of CaCO₃ = Mass /molar mass
Number of moles of CaCO₃= 25.0 g / 100.1 g/mol
Number of moles of CaCO₃ = 0.25 mol
Number of moles of HCl:
Number of moles of HCl = Mass /molar mass
Number of moles of HCl = 13.0 g / 36.5 g/mol
Number of moles of HCl = 0.36 mol
Now we will compare the moles of CaCl₂ with HCl and CaCO₃ .
CaCO₃ : CaCl₂
1 : 1
0.25 : 0.25
HCl : CaCl₂
2 : 1
0.36 : 1/2 × 0.36 = 0.18 mol
The number of moles of CaCl₂ produced by HCl are less it will be limiting reactant.
Answer:
D. The one that runs out first in the reaction
Explanation:
it was right
Which statement about London dispersion forces is TRUE?
а
London dispersion forces are the primary force
holding water molecules together.
b London dispersion forces are the strongest
intermolecular forces.
C London Dispersion forces are temporary in nature.
d London dispersion forces are permanent dipoles
between polar molecules.
Answer: Option (C) is the correct answer.
Explanation:
When electrons between two combining adjacent atoms attain positions which leads to the formation of temporary charges over the atoms then there exists a temporary adjacent force called London dispersion force.
This force is also known as induced dipole-induced dipole attraction.
When the temperature is lowered to a certain point then London forces causes the non-polar substances to condense to liquid and then they freeze into solids.
What is the system of communication that involves an alphabet in which letters are represented by combinations of long and short
signals of light or sound?
A
Email
B)
Morse code
Binary code
D
Digital Signal Reception
Wireless intern
Answer:
B)
Morse code
Explanation:
Morse code is a communication system developed by Samuel Morse, an American inventor, in the late 1830s. The code uses a combination of short and long pulses – dots and dashes, respectively – that correspond to letters of the alphabet.
Answer:
b
Explanation:
I got it right on the exam. Morse code is your answer.
Magnetism is always present when electric charges ___________.
Answer:
begin to move
Explanation:
When electric charges begin to move, this is when magnetism takes place.
Hope this helped!
A coiled spring with coils that are closely spaced then widely then closely then widely then closely, ending with a yellow line labeled 1 second. What is the frequency of this wave?
Answer:
The frequency of the wave is 2Hz.
Explanation:
The frequency of a wave is the number of waves that pass a fixed point in a given amount of time. It can be measured by counting the number of crests that pass the point in a given time period. The higher the number is, the greater is the frequency of the wave.
So, by counting the number of times the coils in the spring are widely spaced, which is 2 times in 1 second, we get the frequency of the wave.
Answer:
The answer is 2.
Explanation:
Hope this helps ;)
If F1 = 500 N, what does F equal? PLEASE HELP
How do you separate a mixture of sodium chloride and potassium trioxonitrateV
Answer:
See explanation
Explanation:
We separate substances based on their important properties such as reaction to heat, solubility in water, magnetic properties, etc.
To separate sodium chloride and potassium trioxonitrateV, we need to heat the solution. KNO3 dissolves at a high temperature and crystallizes out as the solution is cooled.
Hence when we heat the solution, KNO3 dissolves, as we cool the solution, solid KNO3 crystals are obtained while NaCl remains in solution. We have now separated the two salts in the solution.
Note that the solubility of NaCl is almost independent of temperature.
QUICKKKK How much of the protein consumed by humans around the world is fish? 5 percent 20 percent 40 percent 50 percent
Answer:
20%
Explanation:
I HOPE THIS HELPS YOUUUU
Answer:
20%
Explanation:
1- The element sodium has an atomic number of 11 and a
mass number of 12.
How many protons does sodium have?
Answer and Explanation:
Sodium has 11 protons.
To know how many protons are in an element on the periodic table, all you have to do is look at the atomic number. The atomic number is the same as the amount of protons.
The amount of protons defines the element, which is why it appears on the element description as the atomic number.
Hope this helps!
#teamtrees #WAP (Water And Plant)
state the difference between isotopes and isobars
Answer:
Isotopes:- these are those elements in which atoms are same but mass number is different. for eg:- 12^C 6.____________________________________________________________________________
Isobars:- these are those elements in which mass number is same but atoms are different. for example:- 2^Ca 18.how is copper sulphate different to copper sulphide in terms of the elments it contains
Answer:
An Element is a substance made up of only one type of atom as like gold, copper, oxygen, etc.
Copper sulphate with molecular formula [tex](CuSO_4)[/tex], the elements are copper, sulphur and oxygen. It is formed by combination of [tex]Cu^{2+}[/tex] cation and [tex]SO_4^{2-}[/tex] anion.
Copper sulphide with molecular formula [tex](CuS)[/tex], the elements are copper and sulphur. It is formed by combination of [tex]Cu^{2+}[/tex] cation and [tex]S^{2-}[/tex] anion.
How much heat is required to melt 20 g of gold at 1064.18 °C with a heat of fusion of 64 J/g *
Answer:
1280J are required.
Explanation:
Heat of fusion is defined as the amount of heat required to change its state from liquid to solid at its melting point at constant pressure.
As heat of fusion of gold is 64J/g, there are required 64J to melt 1g of gold at its melting point. The energy required to melt 20g is:
20g * (64J/g) =
1280J are required
What is the definition chemical property of matter?
Answer:
Describes its potential to undergo some chemical change or reaction by virtue of its composition
1. When a liquid becomes vapor, its gas particles begin to exert...
a. air pressure.
c. vapor pressure.
b. equilibrium pressure.
d. no pressure
Answer:
vapor pressure.
Explanation:
Answer:
I think it is vapor pressure or air pressure
Please help!! I'll mark brainliest! (see the picture below)
Explanation:
Why brunojg driftwood makes colored fire... Burning driftwood, especially from the ocean gets a fire with blue and lavender flames. The colored fire comes from excitation of the metal salts that have soaked I to the wood. While the flames arepretty, the smoke give off of the fire is toxic
Which ecological level has the most organisms
individual, population, or community?
The amount of kinetic energy something has depends on its...
A) mass and speed
B) mass and height
C) mass and weight
Answer:
it depends on mass and speed
What is the molarity of a 800. mL solution of magnesium bromide if 57.42 g of MgBr2 is dissolved in water?
You have 50 L of CO2 gas at standard temperature and pressure (STP). What would need to be done to the pressure to cut the volume of gas in half?
The pressure is doubled(2 atm)
Further explanationGiven
50 L of CO₂ gas at STP
Required
The pressure
Solution
Changing pressure, constant temperature⇒Boyle's Law
At a fixed temperature, the gas volume is inversely proportional to the pressure applied
[tex]\tt \rm p_1V_1=p_2.V_2\\\\\dfrac{p_1}{p_2}=\dfrac{V_2}{V_1}[/tex]
STP⇒1 atm, T=273 K
The (new) volume of gas in half, so V₂=0.5 V₁ = 0.5 x 50 = 25 L
Because the gas volume is inversely proportional to the pressure than the pressure doubled = 2 atm
Or we can use the formula :
P₂=(P₁V₁)/V₂
P₂=(1 atm x 50 L)/25 L
P₂= 2 atm