Answer:
THE SPECIFIC HEAT OF IRON IS 0.714 J/g °C
Explanation:
Heat absorbed = 1000 J
Mass of the piece of iron = 14 g
Temeperature changes = ( 125-25)°C= 100°C
specific heat of iron = unknown
To find the specific heat of iron in the question use the formula of heat
Heat = mass * specific heat * temperature change
Specific heat = Heat / mass * temperature change
Specific heat = 1000 / 14 * 100
Specific heat = 1000 / 1400
Specific heat = 0.714 J/g °C
So therefore, the specific heat of iron is 0.714 J/g °C
D. Answer the following questions in one word or a single sentence.
1. The metal foil used for wrapping food is made up of which metal
2. Which metal is used in thermometers?
3. Which non-metal is essential for breathing?
4. What is the alloy of iron, nickel and chromium known as?
5. Name the gas released when metals react with acids.
Answer:
According to the numbers 1-5;Aluminium,Mercury,Oxygen,Stainless Steel,Hydrogen gas.
Explanation:
Express your views on how the law, the citizens and community can protect and support victims of human rights violations
Answer:
it all really depends on the superiors of the government. everyone's so corrupt with their views these days, and let personal opinions rules over what the people want. as a latina, i think we should keep fighting and protesting till we get what we really deserve.
Explanation:
Please Help In need of chemistry help
The reaction CH4 + Br2 → CH3Br + HBr is an example of
1.Addition
2.Polymerization
3.Substitution
4.Hydrogenation
What would the molecular formula be if lithium and sulfur reacted to form a neutral compound?
Answer:
Li2SExplanation:
Since Lithium gives away one electron, I believe it goes to Sulfur.
Hope this helps! :)
Answer:
Li*2S
Explanation:
ed tell chem
How many moles are there in 500cm3 of a 0.5mol/dm³ solution of sulfuric acid?
Answer:
0.25moles
Explanation:
There are 1000[tex]cm^{3}[/tex] for 1[tex]dm^{3}[/tex]
Therefore in 1000[tex]cm^{3}[/tex] of 0.5 mol/[tex]dm^{3}[/tex] solution has = 0.5 moles
Therefore 500[tex]cm^{3}[/tex] contains = 0.5/1000 x 500 = 0.25moles
The number of moles of sulfuric acid in 0.5 mol/dm³ solution is equal to 0.25 mol.
What is the molarity?The concentration of the solution can be determined as the number of moles of a solute in per unit volume of a solution is known as molarity or molar concentration.
The Molarity of the solution is calculated in the following formula:
Molarity (M) = Moles (n)/Volume of the Solution (in L)
Now if we have to find the number of moles of solute in the solution, the formula becomes:
Number of moles of solute (n) = Molarity (M) × Volume of the Solution
Given, the concentration of the sulfuric acid solution = 0.5 mol/dm³
The volume of the solution, V = 500 cm³
As we know, 1 dm³ = 10³ cm³, the volume of solution = 0.5 dm³
The number of moles of the sulfuric acid = M × V
= 0.5 × 0.5 = 0.25 mol
Therefore, 0.25 moles of sulfuric acid in 500cm3 of a 0.5mol/dm³ solution of sulfuric acid.
Learn more about molarity, here:
https://brainly.com/question/8732513
#SPJ2
to the
of the substances.
DONE
Answer
what do you mean?
Explanation:
im confused
Answer:
Sorry. I don't understand
Explanation:
What happens to the total mass of a substance undergoing a physical change
Answer: It stays the same
Explanation:
Answer: it stays the same (A)
Explanation:
did the test online got 100%
12. Aditya is stacking some cups. The diagram above shows the cups before they touch each other. Use the information in the diagram to answer the question.
After the cups have been touching for a while, which of the two bottom cups will be cooler, and why?
Answer:
please give more clarification
1. Look at yourself in the front of the spoon (the side where the food sits). What do you see?
The you see the image
Answer:
If you look at yourself in the front of the spoon, you see that the mirror forms an inverted real image.
Explanation:
The word 'concave' means to bend inwards.
A curved mirror is a mirror that has a curved reflecting surface.
The front side of the spoon is just like a concave mirror. If you look at yourself in the front of the spoon, you see that the mirror forms an inverted real image.
Concave mirrors produce real inverted image of an object only if it is placed further away from the mirror than the focal point.
Answer:
It shows me upside down like a ghost. OoooOooh
Explanation:
Boo
metallic pan is provided with a wooden plastic handle give reason
The metallic pan iis most likely going to be used on a stove.
The stove is heating something, and the conductive metallic pan will, well, conduct that heat throughout the entire body of the pan. Doing this will spread the heat to the handle, burning your hands.
Both wood and plastic are insulators, and they do not conduct heat or electricity. They will insulate your hands and protect them from the heat.
HELP MY CHEMISTRY NERDS PLEASE PLEASE PLEASE !!!!! I WILL LUV U 4EVER
Answer:
A. 40 kPa
Explanation:
P(total) = P(O2) + P(N2) + P(CO2)
300kPa = 160 kPa + 100kPa + P(CO2)
P(CO2) = 300-160-100= 40 kPa
I NEED HELP PLEASE, THANKS SO MUCH! :)
Solids, liquids and gases are the three most commonly accepted phases of matter. Explain the properties of each phase, including their relative energy.
Answer:
Here's what I get
Explanation:
The molecules of a substance attract each other.
They are also in constant motion.
Their kinetic energy increases with the temperature.
1. Solids
If the temperature is low enough, the molecules will have little kinetic energy.
They will not be able to escape the attractions of their neighbours, so they will be fixed in place in a crystalline array.
All they can do is vibrate about their position in the array.
The substance will be a solid.
2. Liquids
If the temperature is higher, the molecules will have enough kinetic energy to slide past each other, but not enough to escape the attractions of nearby molecules.
The substance will be a liquid.
3. Gases
If the temperature is high enough, the molecules will have enough kinetic energy to escape from the surface and fly off into space.
The molecules will on average so far apart that they won't feel the attractions of others.
When they do collide, they will have energy to bounce off each other rather than stick together.
The substance will be a gas.
Difference between rapid combustion and spontaneous combustion.
Answer: The difference between rapid combustion and spontaneous combustion...
Explanation:
Rapid combustion is a form of combustion, otherwise known as a fire, in which large amounts of heat and light energy are released, which often results in a flame.Whereas spontaneous combustion is the ignition of organic matter (e.g. hay or coal) without apparent cause, typically through heat generated internally by rapid oxidation.
Action and reaction forces are described by newtons what law of motion
According to Newton, whenever objects A and B interact with each other, they exert forces upon each other. ... These two forces are called action and reaction forces and are the subject of Newton's third law of motion. Formally stated, Newton's third law is: For every action, there is an equal and opposite reaction.
There are total three laws of newtons, first law of newtons, second law of newton and third law of newton. Therefore, action and reaction forces are described by newtons third law of motion.
What is newton's third law?Newton's first law is also called law of inertia. An object at rest remains at rest, and an object in motion remains in motion at constant speed and in a straight line unless acted on by an unbalanced force.
Third law states that for every action there is an equal and opposite reaction. Third law is applicable in many field of physics. The third law is applicable in the running of rockets. The third law is also used by swimmers during swimming in pool.
Therefore, action and reaction forces are described by newtons third law of motion.
To learn more about newton's law, here:
https://brainly.com/question/29768600
#SPJ6
A.
B.
C.
D.
Help me please?
Answer:
B: it allow quick conversation to others
The reaction 2 NO(g) ⇌ N2(g) + O2(g) has a value of Keq = 2400 at a temperature of 2000 K. If 0.570 mol of NO(g) is initially placed in a 3.0 L container, calculate the equilibrium concentrations of each gas
Answer:
[tex][N_2]_{eq}=0.094M[/tex]
[tex][O_2]_{eq}=0.094M[/tex]
[tex][NO]_{eq}=0.002M[/tex]
Explanation:
Hello,
In this case, for the given chemical reaction, we write the following law of mass action:
[tex]Keq=\frac{[N_2][O_2]}{[NO]^2}[/tex]
That in terms of the change [tex]x[/tex] due to the reaction extent (ICE procedure) we can write:
[tex]Keq=\frac{x*x}{([NO]_0-2x)^2}[/tex]
Thus, the initial concentration of nitrogen monoxide is:
[tex][NO]_0=\frac{0.570mol}{3.0L} =0.19M[/tex]
Thereby, we write:
[tex]2400=\frac{x*x}{(0.19-2x)^2}[/tex]
That we can solve by suing the quadratic equation formula or solver to obtain two roots:
[tex]x_1=0.094M\\x_2=0.096M[/tex]
Nevertheless, the correct answer is 0.094 M since the other root will produce a negative concentration of nitrogen monoxide at equilibrium, therefore, the equilibrium concentrations turn out:
[tex][N_2]_{eq}=x=0.094M[/tex]
[tex][O_2]_{eq}=x=0.094M[/tex]
[tex][NO]_{eq}=0.19M-2x=0.19M-2(0.094M)=0.002M[/tex]
Best regards.
what happens to particles during a physical change?
Answer:
im pretty sure they heat up
Explanation:
as they use energy to go from solid to liquid to gas, they need heat to do so as they have a melting and boiling point
what can a criminal do to make the bullet not match the gun hurry plz
What does the kinetic theory say about the kinetic energy present in solids
Answer: The kinetic energy of solids is limited to vibrational energies..the particles are tightly bound in their crystalline structure and can only bend, flex, and vibrate about relatively fixed position. When vibrational energies exceed the strength of the force holding the particles together, the crystal structure collapses and we say the material melted. The particles can now have, in addition to its vibrational energies, rotational energy. Chunks of the collapsed crystal can, like a ball floating in water, rotate without showing much translational energy. Generally, we associate solids with vibrational kinetic energy, liquids with rotational kinetic energy, and gases with translational kinetic energy. Actually though, liquids have both vibrational and rotational energies, and gases have all three.
Strontium, a group 2 element with an electron configuration of 1s^2 2s^2 2p^6 3s^2 3p^6 4s^2 3d^10 4p^6 5s^2 , will form a _____ ion in a chemical bond.
+1
+2
-1
-2
Answer:
Strontium, a group 2 element with an electron configuration of 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d¹⁰ 4p⁶ 5s² , will form a +2 ion in a chemical bond.
Explanation:
An ionic bond is produced between metallic and non-metallic atoms, where electrons are completely transferred from one atom to another. During this process, one atom loses electrons and another one gains them, forming ions. Usually, the metal gives up its electrons forming a cation to the nonmetal element, which forms an anion.
So an ion is an atom or group of atoms that have an electric charge. A cation is an ion that has a positive charge.
The alkali metals in the earth (Elements IIA) lose two electrons to form a 2+ cation. Strontium is an alkali metal that loses the two electrons belonging to 5s², forming the +2 ion.
Answer:
+2
Explanation:
Why are prefixes not used in naming ionic compounds?
A. Two ions can combine in only one combination.
B. The number of ions is not fixed in a compound.
C. A roman numeral is used instead of a prefix
D. A subscript follows each name instead of a prefix.
Answer:
A.
Explanation: thats what i got right on the quiz lol
Prefixes are not used in naming ionic compounds because two ions can combine in only one combination.
It is common in organic chemistry and with a few other molecular species, to name the compound using a prefix such as di, tri, tetra etc to indicate the positions of moieties in the molecule. This is important because there could be several possible combinations of atoms in a molecule.
In the case of ionic compounds, the combining ions can only have one possible arrangement.
Hence, the reason why prefixes are not used in naming ionic compounds is because two ions can combine in only one combination.
Learn more: https://brainly.com/question/11527546
Which of the following symbols would be included in the noble gas notation for an element that had valence electrons in the
5s subshell?
A) Ar
B) Kr
C) Хе
D) Rn
Would be appreciated if I could get a quick answer. Thank you in advance.
Answer: C.) Xe
Explanation: To figure out the answer go to the Noble Gas Family and count down 5 elements.
According to the electronic configuration the symbol which would be included in the noble gas notation for an element that had valence electrons in the 5 s subshell is xenon .
What is electronic configuration?Electronic configuration is defined as the distribution of electrons which are present in an atom or molecule in atomic or molecular orbitals.It describes how each electron moves independently in an orbital.
Knowledge of electronic configuration is necessary for understanding the structure of periodic table.It helps in understanding the chemical properties of elements.
Elements undergo chemical reactions in order to achieve stability. Main group elements obey the octet rule in their electronic configuration while the transition elements follow the 18 electron rule. Noble elements have valence shell complete in ground state and hence are said to be stable.
Learn more about electronic configuration,here:
https://brainly.com/question/29757010
#SPJ5
The mass of an object is measured in _____. liters meters degrees kilograms
Does the number of ions in solution increase, decrease, or remain constant?
It decreases at first, then increases.
It continuously increases.
It continuously decreases.
It increases at first, then decreases.
Answer:
It continuously decreases.
WILL GIVE BRANLIEST TO FIRST ANSWER!!! I know the correct answer is either a or d. Can anyone explain which one it is and why? CH3C ≡ CCH2CH2Cl is named: a. 1-chloro-3-pentyne b. 5-chloro-2-pentene c. 1-acetylenyl-3-chloropropane d. 5-chloro-2-pentyne
Answer: The IUPAC name of [tex]CH_3C\equiv CCH_2CH_2Cl[/tex] is 5-chloro-2-pentyne
Explanation:
1. First select the longest possible carbon chain. For the number of carbon atom, we add prefix as 'meth' for 1, 'eth' for 2, 'prop' for 3, 'but' for 4, 'pent' for 5, 'hex' for 6, 'sept' for 7, 'oct' for 8, 'nona' for 9 and 'deca' for 10.
2. The longest possible carbon chain should contain all the bonds and functional groups.
3. The numbering is done in such a way that the carbon containing the functional group or substituent gets the lowest number. Triple bond is given priority over substituent halogen.
4. The naming of alkane is done by adding the suffix -ane, alkene by adding the suffix -ene, alkyne.
Thus the IUPAC name of [tex]CH_3C\equiv CCH_2CH_2Cl[/tex] is 5-chloro-2-pentyne
The atomicity of bromine is
Answer:
So, the atomicity of noble gases is 1. Example. ... So, the atomicity of hydrogen, nitrogen, oxygen, chlorine, bromine and iodine is 2 each.
Explanation:
So, the atomicity of noble gases is 1. Example. ... So, the atomicity of hydrogen, nitrogen, oxygen, chlorine, bromine and iodine is 2 each.
could help
Question 11
A solution cannot dissolve any more solute even though only a small amount of solute has
been added to the solvent. This solution is
1. saturated and concentrated
2. unsaturated and dilute
3. saturated and dilute
4. unsaturated and concentrated
Answer:
Explanation:
B.) Saturated
A saturated solution is when the maximum amount of solute that could be dissolved in that solvent volume at that temperature and pressure has been dissolved, adding more solute beyond this point would lead to the additional solute not dissolving in the solvent. When the maximum solute concentration in the solution that can be dissolved has been reached the solution is said to be saturated.
Hope This Helps??
Which of the following contribute(s) to most of the mass of an atom?
O A) Protons and electrons
B) Protons only
C) Protons and neutrons
OD) Neutrons only
Answer:
C) protons and neutrons
Explanation:
im pretty sure it is c
What is the frequency of radiation emitted by a photon of light if the energy released during its transition to ground state is 3.611 × 10-15 joules? (Planck's constant is 6.626 × 10-34 joule seconds)
Answer:
5.449 x 10¹⁸ Hz
Explanation:
Energy (E) =Frequency (F) x Plancks constant (h)
F= 3.611x10⁻¹⁵J / 6.626 x 10⁻³⁴ Js⁻¹
F =5.449 x10¹⁸ s⁻¹ or 5.449 x 10¹⁸ Hz
Which of the following is true for a gas under conditions of very low temperature? PV ÷ nRT = 1, because all gases behave ideally at very low temperatures. PV ÷ nRT = 1, because the actual volume of the gas molecules becomes considerable. PV ÷ nRT > 1, because the low temperatures speed up the particles. PV ÷ nRT < 1, because particles are unable to overcome intermolecular attractions.