Answer:
0.077M is the concentration of the hydroxyl ion
Explanation:
Dilution factor is the ratio between the aliquot that is taken of a solution and the total volume of the diluted solution.
For the problem, dilution factor is:
7.53cm³ / 147cm³ = 0.05122
To obtain molarity of a diluted solution you must multiply dilution factor and initial molarity of the solution, thus:
1.5 M × 0.05122 = 0.077M is the concentration of the hydroxyl ion
I NEED HELP PLEASE, THANKS SO MUCH! :)
Solids, liquids and gases are the three most commonly accepted phases of matter. Explain the properties of each phase, including their relative energy.
Answer:
Here's what I get
Explanation:
The molecules of a substance attract each other.
They are also in constant motion.
Their kinetic energy increases with the temperature.
1. Solids
If the temperature is low enough, the molecules will have little kinetic energy.
They will not be able to escape the attractions of their neighbours, so they will be fixed in place in a crystalline array.
All they can do is vibrate about their position in the array.
The substance will be a solid.
2. Liquids
If the temperature is higher, the molecules will have enough kinetic energy to slide past each other, but not enough to escape the attractions of nearby molecules.
The substance will be a liquid.
3. Gases
If the temperature is high enough, the molecules will have enough kinetic energy to escape from the surface and fly off into space.
The molecules will on average so far apart that they won't feel the attractions of others.
When they do collide, they will have energy to bounce off each other rather than stick together.
The substance will be a gas.
I NEED HELP PLEASE, THANKS! :)
Explain the process of sublimation. Name one substance that sublimes at room temperature and pressure.
Answer:
Here's what I get
Explanation:
Sublimation is the conversion of a solid directly to a gas, without passing through the liquid state.
It occurs when the molecules of a solid have absorbed enough heat (kinetic energy) for some molecules to overcome the attractive forces of their neighbours and escape directly into the vapor phase.
One substance that sublimes at room temperature and pressure is CO₂ (dry ice).
Naphthalene is a substance that sublimes at room temperature and pressure.
What do you mean the process of sublimation ?Sublimation is defined as a process in which solid converts into gas directly without converting into liquid.
In the sublimation process, the reaction is an endothermic reaction, as the chemical bonds between molecules are broken down in order to release them into the air. Therefore ,the energy is released and so it is an endothermic reaction.
The heat or energy required to change the state from solid to gas is called the enthalpy of sublimation .Generally, it is expressed as KJ/m o l. Sublimation only occurs at pressures and temperatures .
Hence , Naphthalene is a substance that sublimes at room temperature and pressure.
Learn more about sublimation ,here:
https://brainly.com/question/9967928
#SPJ2
Does the number of ions in solution increase, decrease, or remain constant?
It decreases at first, then increases.
It continuously increases.
It continuously decreases.
It increases at first, then decreases.
Answer:
It continuously decreases.
The concentration of 1130+ in a solution is found to be 1.75 X 10-8 M 250C. Find [OH].
Answer:
[OH] = 6.31 * 10^-7 M
Explanation:
Mathematically;
pH + pOH = 14
Mathematically;
pH = -log [H3O+]
also;
pOH = -log [OH]
From the question; [H3O+] = 1.75 * 10^-8 M
pH = -log [1.75 * 10^-8]
pH = 7.76
since pH is normally given to 1 decimal place
we can say pH = 7.8
Now;
pH + pOH = 14
pOH = 14-7.8
pOH = 6.2
now pOH = -log [OH]
[OH] = -antilog 6.2
[OH] = 6.31 * 10^-7 M
How to find the final temperature
Answer:
The final temperature will be "12.37°".
Explanation:
The given values are:
mass,
m = 0.125 kg
Initial temperature,
c = 22.0°C
Time,
Δt = 4.5 min
As we know,
⇒ [tex]q=mc \Delta t[/tex]
On putting the estimated values, we get
⇒ [tex]=0.125\times 22.0\times 4.5[/tex]
⇒ [tex]=12.37^{\circ}[/tex]
what is the mass of 3.01x1023 atoms of iron(atomic mass of fe=56)
Answer:
N = n× l
N = number of entities
n= moles
l = Avogadro's constant = 6.023 × 10^23
3.01 × 10^ 23 = n * 6.023 × 10^23
n = 3.01 × 10^23/6.023 × 10^23
n= 0.5moles
Molar mass = mass/ number of moles
Molar mass = 56
mass = 56 × 0.5
= 28g
Hope this helps.
If [H+] = 1.70 x 10-3 M, what is the pH of the solution?
Answer:
2.77
Explanation:
pH = - log (1.70 x 10^-3) = 2.77
what is the net iconic charge of an oxygen ion?
Which body system processes food into a useable source of energy?
Answer:
Glucose, found in the food animals eat, is broken down during the process of cellular respiration into an energy source called ATP. When excess ATP and glucose are present, the liver converts them into a molecule called glycogen, which is stored for later use.
⚠️SOMEONE PLEASE HELP⚠️
Which describes two phases in dynamic equilibrium?
O A. Molecules in one phase continually change to the other.
O B. The total number of molecules must be equal in each phase.
O C. Molecules do not change from one phase to the other.
O D. The total number of molecules in each phase stays constant.
Answer:
The total number of molecules in each phase stays constant
Explanation:
i just took the test and got it right.
In the dynamic equilibrium between 2 phases, the total number of molecules in each phase stays constant (Option D).
When does dynamic equilibrium occur?Dynamic equilibrium occurs when the direct and reverse rates are equal and the concentrations remain constant over time.
Which describes two phases in dynamic equilibrium?
A. Molecules in one phase continually change to the other. NO. Molecules in both phases continually change.B. The total number of molecules must be equal in each phase. NO. This is not necessarily true.C. Molecules do not change from one phase to the other. NO. This would be a static equilibrium.D. The total number of molecules in each phase stays constant. YES. Since the forward and reverse rates are equal.In the dynamic equilibrium between 2 phases, the total number of molecules in each phase stays constant (Option D).
Learn more about dynamic equilibrium here: https://brainly.com/question/12920261
#SPJ4
the wavelength of a light wave whose frequency 5.0x 10^9 s^-1 is
Answer:
wavelength = 6 cm .
Explanation:
frequency given = 5 x 10⁹ .
wavelength = velocity of light / frequency
= 3 x 10⁸ / 5 x 10⁹
= .06 m
= 6 cm
7) Put the following molecules in order of where they would be found in the fractional distillation
column (from bottom to top). Hexane, Octane, Ethane, Dodecane, Decane, Methane
FAST
Answer:Crude oil is a mixture of many saturated hydrocarbons. They can be separated into fractions by the process of fractional distillation.
Explanation:
At STP how many moles of
argon gas are present in 6.5
liters of argon gas
Answer:
0.289 molIn order to determine the number of moles of the given volume of Ar, divide the given volume by the molar volume of an ideal gas,
22.710 L/mol
Explanation:
So you have a volume of 6 .5
6.5L / 22.710 L/mol
L is eliminate .
6.5/ 22.710 L/mol = 0.286 mol
Using the older STP values of 0 ∘ C or 273.15 K , and pressure of 1 atm , molar volume is 22.414 L/mol .
6.5L /22.414 L/mol .= 0.289 mol
10) What does mRNA copy and carry the code to produce? (1pt)
a) DNA
b) Proteins
Answer:
a
Explanation:
Why is it much safer picking up hot dishes with a dry cloth
than a wet one?
Answer: Using a dry tea towel to grab a hot pan puts the heat into the towel fibers, which are poor conductors of heat, and which serve to separate your hand from the hot pan by a set of air gaps.
A dry towel is a better insulator than a wet towel. Because the water in the wet towel fills the empty spaces between the fibers of the towel and helps to conduct heat. Therefore, it is much safer to pick up hot dishes with a dry cloth than a wet one.
What is thermal conduction?Conduction can be described as the process by which heat is transferred from the hotter to the colder end of an object. The capability of the object to conduct heat is its thermal conductivity.
Heat flows along a temperature gradient. Heat is conducted from the hot plate of a stove to the bottom of a saucepan in contact with it, which is an example of thermal conduction.
In solids, conduction is the combination of vibrations and collisions of molecules, propagation and collisions, and diffusion of free electrons. In gases and liquids, conduction is due to the diffusion and collisions of molecules while their random motion. Therefore, thermal conduction will be faster in a wet towel than in a dry towel.
Learn more about thermal conduction, here:
https://brainly.com/question/10542041
#SPJ2
How much heat is added if 0.2067g of water is increased in temperature by 0.855
degrees C?
Answer:
0.756 J
Explanation:
Temperature change (delta T) = 0.855 degrees Celsius
Mass of water (m) = 0.2067 g
Specific heat capacity of water (c) = 4.28 J/g degrees C
Heat added = m * c * delta T
= (0.2067 * 4.28 * 0.855) J
= 0.756 J
Can someone please help me with this question
Answer:
the second one I think...
Answer:
The answer is the first one.
Acceleration is the change of velocity
Velocity is another term for speed with direction.
what happens to particles during a physical change?
Answer:
im pretty sure they heat up
Explanation:
as they use energy to go from solid to liquid to gas, they need heat to do so as they have a melting and boiling point
I NEED HELP PLEASE, THANKS! :)
Combustion reactions are a notable source of carbon dioxide in the environment. Using the following balanced equation, how many grams of carbon dioxide are formed when 100.00 g of propane (C3H8) is burned? Express your answer to the correct number of significant figures.
Answer:
[tex]\large \boxed{\text{299.4 g}}[/tex]
Explanation:
We will need a chemical equation with masses and molar masses, so, let's gather all the information in one place.
Mᵣ: 44.10 44.01
C₃H₈ + 5O₂ ⟶ 3CO₂ + 4H₂O
m/g: 100.00
To solve a stoichiometry problem, you must
Use the molar mass to convert mass of C₃H₈ to moles of C₃H₈ Use the molar ratio to convert moles of C₃H₈ to moles of CO₂ Use the molar mass to convert moles of CO₂ to mass of CO₂
1. Moles of C₃H₈
[tex]\text{Moles of C$_{3}$H}_{8} = \text{100.00 g C$_{3}$H}_{8} \times \dfrac{\text{1 mol C$_{3}$H}_{8}}{\text{44.10 g C$_{3}$H}_{8}} = \text{2.268 mol C$_{3}$H}_{8}[/tex]
2. Moles of CO₂
The molar ratio is 3 mol CO₂:1 mol C₃H₈
[tex]\text{Moles of CO}_{2} = \text{2.268 mol C$_{3}$H}_{8} \times \dfrac{\text{3 mol CO}_{2}}{\text{1 mol C$_{3}$H}_{8}} = \text{6.803 mol CO}_{2}[/tex]
3. Mass of CO₂
[tex]\text{Mass of CO}_{2} = \text{6.803 mol CO}_{2} \times \dfrac{\text{44.01 g CO}_{2}}{\text{1 mol CO}_{2}} = \textbf{299.4 g CO}_{2}\\\text{The mass of CO$_{2}$ required is $\large \boxed{\textbf{299.4 g}}$}[/tex]
Answer:
Number of moles of propane:
=Mass in grams ÷ Relative molecular Mass
= 100/((12*3) + (1*8))
= 100 ÷ 44
= 2.2727
Mole ratio propane:carbon (IV) oxide = 1:3(from the equation)
Number of moles of CO2 = 3*2.2727 = 6.8181
Mass in grams = Relative molecular Mass * Number of moles
= 44 * 6.8181
= 299.9964 grams
Explanation:
Which statement best describes how an ionic bond forms?
The transfer of electrons forms strong bonds between ions.
The sharing of electrons forms strong bonds between ions.
The transfer of electrons results in attractive forces between molecules.
The sharing of electons results in attractive forces between molecules.
Answer:
The answer is option A
Explanation:
The question states,'which statement best describes how an ionic bond forms. The correct option is A. Ionic bonds are formed as a result of complete transfer of electrovalence electrons from one atom to another. The atom that donate the electron become a positively charged ion while the atom that received the atom become a negatively charged ion.
Brainliest is greatly appreciated
Answered by: Skylar
6/8/2020
10:05 AM (Eastern Time)
Answer:
A!!!!
Explanation:
How many moles of gas are contained in 22.41 liters at 101.325 kPa and 0ᴼC? (Note: use Ideal Gas Law, PV = nRT) a 2.5 mole b 1.5 mole c 1.0 mole d 2.0 mole
Answer:
Therefore, 1.00 mole of the gas is present in the container.
Explanation:
The following data were obtained from the question:
Volume (V) = 22.41L
Temperature (T) = 273K
Pressure (P) = 101.325 kPa
Gas constant (R) = 8.31 L.kPa/mol.K.
Number of mole (n) =...?
The number of mole of the gas in the container can obtained by applying the ideal gas equation as illustrated below:
PV = nRT
Divide both side by RT
n = PV /RT
n =101.325 x 22.41 / 8.31 x 273
n = 1.00 mole.
Therefore, 1.00 mole of the gas is present in the container.
Answer:
1 mole of gas is contained in 22.41 liters at 101.325 kPa and 0ᴼC
Explanation:
Ideal gases are a simplification of real gases that is done to study them more easily. It is considered to be formed by point particles, do not interact with each other and move randomly. It is also considered that the molecules of an ideal gas, in themselves, do not occupy any volume.
The pressure, P, the temperature, T, and the volume, V, of an ideal gas, are related by a simple formula called the ideal gas law:
P*V = n*R*T
where P is the gas pressure, V is the volume that occupies, T is its temperature, R is the ideal gas constant, and n is the number of moles of the gas.
In this case:
P= 101.325 kPa= 1 atmV= 22.41 Ln=?R= 0.082 [tex]\frac{atm*L}{mol*K}[/tex]T= 0°C= 273 °KReplacing:
1 atm*22.41 L=n* 0.082 [tex]\frac{atm*L}{mol*K}[/tex]*273 K
Solving:
[tex]n=\frac{1 atm*22.41 L}{0.082\frac{atm*L}{mol*K} *273 K}[/tex]
n=1 mole
1 mole of gas is contained in 22.41 liters at 101.325 kPa and 0ᴼC
Of the reactions listed below, which one is NOT a combination reaction? A) C + O2 => CO2 B) 2Mg + O2 => 2MgO C) 2N2 + 3H => 2NH3 D) CaO + H2O => Ca(OH)2 E) 2CH4 + 4O2 => 2CO2 + 4H2O
Answer:
E
Explanation:
A combination reaction is one in which two elements or two compounds react to give a new single compound
Hence, what we are expecting on the reactant side is only a single product and not a mixture of products
For the first reaction, we had two elements giving a single product
For the second reaction, we had same
For the third, we had same
For the fourth, we had two compounds reacting to give a singe new product
While in the last, we had two different products which means it does not follow the definition of a combination reaction and that makes it our answer
Energy is the ability to do work or produce heat.
True
False
Answer: true
Explanation: hope this helpes
Answer:
TRUE
Explanation:
power derived from the utilization of physical or chemical resources, especially to provide light and heat or to work machines.
A.
B.
C.
D.
Help me please?
Answer:
B: it allow quick conversation to others
Which of the following rocks would probably be made up of the largest
mineral grains?
(granite, scoria, pumice, basalt)
Answer:
Granite will be made up of the largest
Why would we want to correct for water vapor?
Answer:
The vapor pressure due to water in a sample can be corrected for in order to get the true value for the pressure of the gas.
Explanation:
What is the half-life of a radioisotope if a 50-g sample becomes 25 g after 18
days?
O A. 25 days
O B. 9 days
O C. 50 days
O D. 18 days
Answer:
18 DAYS IS THE HALF LIFE OF THE RADIOISOTOPE.
Explanation:
Using the formula
Nt = No * (1/2)^t/t1/2
where;
Nt = amount remaining = 25 g
No = Initial amounrt of the radioisotope = 50 g
t = time elapsed = 18 days
t1/2 = half life = unknown
Substitute the values into the equation and obtain the half life of the radioisotope;
Nt = No * (1/2) ^t/t1/2
25 = 50 * (1/2) ^18/t1/2
25 /50 = (1/2)^18/ t1/2
1/2 = (1/2)^18/t1/2
1/2)^1 = (1/2)^18/t1/2
1 = 18/t1/2
t1/2 = 18 days.
So therefore the half life of the radioisotope is 18 days.
Answer:
18 days
Explanation:
Did it on A pex
What does the kinetic theory say about the kinetic energy present in solids
Answer: The kinetic energy of solids is limited to vibrational energies..the particles are tightly bound in their crystalline structure and can only bend, flex, and vibrate about relatively fixed position. When vibrational energies exceed the strength of the force holding the particles together, the crystal structure collapses and we say the material melted. The particles can now have, in addition to its vibrational energies, rotational energy. Chunks of the collapsed crystal can, like a ball floating in water, rotate without showing much translational energy. Generally, we associate solids with vibrational kinetic energy, liquids with rotational kinetic energy, and gases with translational kinetic energy. Actually though, liquids have both vibrational and rotational energies, and gases have all three.
The electron dot diagram for a neutral atom of chlorine (atomic number 17) is shown below.
Which of the following symbols represents a chlorine ion with a stable arrangement of eight valence electrons?
A. 35Cl1-
B. 35Cl2-
C. 35Cl1+
D. 35Cl
Answer:
A. 35Cl1-
Explanation:
Chlorine needs 1 more electron to have full octet thus will take 1 electron and possess a -1 charge.
find reducing and oxidizing agents
Answer:
SO4^2- is the oxidizing agent.
l^- is the reducing agent.
Explanation:
SO4^2- + I^- + H^+ —> H2S + I2 + H2O
To know which is the oxiding agent or the reducing agent, let us calculate the change in oxidation number of each element. This is illustrated below:
Note: the oxidation number of Hydrogen (H) is always +1 except in hydride where it is -1.
The oxidation number of Oxygen (O) is always -2 except in peroxide where it -1
For S:
SO4 = -2
S + 4O = -2
O = - 2
S =.?
S + (4 x -2) = -2
S - 8 = -2
Collect like terms
S = -2 + 8
S = +6
H2S = 0
2H + S = 0
H = +1
S =..?
2(1) + S = 0
2 + S = 0
Collect like terms
S = 0 - 2
S = -2
The oxidation number of S changes from +6 to -2
For I:
I = - 1
I = 0
The oxidation of I changes from -1 to 0.
Since the oxidation number of S changes from +6 to -2 i.e reduce, therefore SO4^2- is the oxidizing agent.
The oxidation number of I changes from -1 to 0 ie increased. Therefore, l^- is the reducing agent.