[tex]power = 205.8 \: watt \\ solution \\ mass = 66 \: kg \\ time = 44 \: sec \\ distance = 14 \\ now \\ power = \frac{w}{t} \\ \: \: \: \: \: \: \: \: = \frac{f \times d}{t} \\ \: \: \: \: \: = \frac{m \times g \times d}{t} \\ \: \: \: \: \: \: = \frac{66 \times 9.8 \times 14}{44} \\ \: \: \: \: = \frac{9055.2}{44} \\ \: \: \: \: \: = 205.8 \: watt \\ hope \: it \: helps[/tex]
Suggest what would happen to the pressure of a gas at constant temperature if the volume of the gas is halved.
Answer:
8.31 m3-Pa/mol-K
Explanation:
Define the term displacement. Is it a vector quantity or a scalar quantity?
Explanation:
The difference between final and initial position of an object is called its displacement. Its formula is given by :
[tex]\text{displacement}=\text{final position}-\text{initial position}[/tex]
It is equal to the shortest path covered by it. It is a vector quantity. It has both magnitude and direction.
can there be shadows at night outside?
Answer:
To see a shadow there most be light provided, even if it's night and there are lights, we can still see the shadow but if there is no light, we can't.
Hope it helped (:
Answer: yes of course, but there should be some light to make or see shadows.
The pressure exerted by 15m of liquid is 1500pa.The acceleration due to gravity g=10m/s^2.Calculate the density liquid.
Answer:
1500 divided by 150(15m x 10m/s^2) = 10
Q2 : Water waves in a shallow dish are 6cm long. At one point water moves up and down at a rate of 4.8 oscillation per second. What is the speed of water waves? What is the period of water waves? What is the frequency of water waves?
Answer:
v = 0.3 ms⁻¹
Frequency = 4.8 Hz
T = 0.21 sec
Explanation:
The rate of oscillation is 4.8 oscillation/second
Let's see frequency's definition " no. of vibration/oscillation per unit time"
So,
Frequency = 4.8 Hz
Now
Time period is the reciprocal of frequency
T = 1/f
T = 1/4.8
T = 0.21 sec
Now
Using formula
v = f λ
f = 4.8 Hz , λ = 6 cm (But we need to convert it in a standard form)
So, λ = 0.06 m
Putting in formula
v = (4.8)(0.06)
v = 0.3 ms⁻¹
when scientists publish experimental results their results are often criticized by other scientists how is this process a source of strength of Science? It encourages scientists to give convincing evidence for the results
it allows scientists to keep their data secret
a scientific model is not used full unless everyone thinks it's true
or if forces scientists to publish results that are in line with current theories
Answer: It encourages scientists to give convincing evidence for the results
Answer:
A.) would be the right answer
Explanation:
I took the test :)
For a moving object, the force acting on the object varies directly with the objects acceleration. When a force of 24N acts on a certain object, the acceleration of the object is 3m/s^2. If the acceleration of the object becomes 10m/s^2, what is the force
Answer:
80 N
Explanation:
From the question,
F = ma .......................... Equation 1
Where F = Force, m = mass of the object, a = acceleration of the object.
make m the subject of the equation
m = F/a.................... Equation 2
Given: F = 24 N, a = 3 m/s²
Substitute into equation 2
m = 24/3
m = 8 kg.
If the acceleration of the object becomes 10 m/s²,
Substitute into equation 1
F = 10(8)
F = 80 N.
Drag each tile to the correct box. Arrange the steps in order to describe what happens to a gas when it cools. The particles of gas move slower. The gas changes to a liquid. The gas loses thermal energy. The space between the gas particles decreases. ↓ ↓ ↓
Answer:
Ok, as the gas starts to cool down, the kinetic energy of the particles starts to decrease, so the first thing that happens is:
"the gas loses thermal energy" (as the gas cools down, the temperature decreases, so it loses thermal energy)
Now, the kinetic energy must decrease, so now:
"the particles of gas move slower".
Then, as the particles start to move slower, they start to get closer to eachother, then we have:
"The space between the gas particles decreases."
As the particles start to get close to eachother, the density of the gas starts to increase, until a point where we get to the condensation point, here we have a change of phase and the gas changes to a liquid, so here we have:
"The gas changes to a liquid."
Answer:
a
Explanation:
A frisbee is flying through the air. Which forces are acting on it (choose 3)
Answer:
The force acting on it is lift
A negative test charge experiences a force to the right as a result of an electric field. Which is the best conclusion to draw based on this description?
a.The electric field points to the left because the force on a negative charge is opposite to the direction of the field.
b.The electric field points to the right because the force on a negative charge is in the same direction as the field.
c.No conclusion can be drawn because the sign of the charge creating the field is unknown.
d.No conclusion can be drawn because the amount of charge on the test charge is unknown.
OPTION B IS THE ANSWER
Answer:
The real answer is A 2023 answer -_-
Explanation:
When did Pangaea begin to break apart?
Answer:
Hey!
Well according to scientific data and analysis, it started to break up about 175 - 200 million years ago!!
Explanation:
HOPE THIS HELPS!!
Answer:
250 million (:
Explanation:
What is the centripetal force of an object undergoing uniform circular motion when its radius is doubled and its speed remains constant?
A.
the same as before
B.
twice as great as before
C.
half as great as before
D.
four times as great as before
Answer:
C
Explanation:
Now the centripetal force is that force that keeps the object on course along the circle;
This is expressed mathematically as ;
F = mv^2/ r
Where F - centripetal force
m- mass of the object
v- velocity of the object
r- raduis
Note from the expression as r increases F decreases so if v and the mass is constant if r doubles F will reduce by half.
Answer:
C. half as great as before
Explanation:
If a body of mass 10 kg is pushed with a force of 15N, then the acceleration of the body is
Answer:
1.5m/s2
Explanation:
F=ma
a=F/m
a=15/10
a=1.5m/s2
Which equations could be used as is, or rearranged to calculate for frequency of a wave?
Answer:
frequency = wavelength over speed. f. speed = wavelength x frequency
Explanation:
it is on google
Answer:wavelength=speed/frequency
Explanation:
WILL GIVE BRAINLIEST AND 10 POINTS!! An asteroid is hustling through the solar system, in the vicinity of the inner planets. Based on what you know about gravitational attraction, which planet is LEAST likely to attract the asteroid?
Answer:
mercury
Explanation:
The planet with the smallest mass must have the smallest gravitational pull - which is mercury, with a pull of approx. 0.38 times the Earth's gravitational pull.
The power of a machine is 6000 W. This machine is scheduled for design improvements. Engineers have reduced the
time for the output by one half from 15 s to 7.5 s. What work would be required to cut the time in half.
Step #1
Step #2
Step #3
Explanation:
Work = power × time
W = (6000 W) (7.5 s)
W = 45,000 J
iv. The lift raises a car of mass 850 kg to a height of 2.1 m. It uses a force of 8330 N and takes 4 seconds to raise the car. What is the power of the lift? (1 point)
Answer:
Power is 4373.25 W
Explanation:
We have,
The lift raises a car of mass 850 kg to a height of 2.1 m. It uses a force of 8330 N and takes 4 seconds to raise the car. It is required to find the power of the lift. Power is equal to the rate at which the work is done. So,
[tex]P=\dfrac{Fd}{t}\\\\P=\dfrac{8330\times 2.1}{4}\\\\P=4373.25\ W[/tex]
So, the power of the lift is 4373.25 W.
The mass of a certain man is 250g..
I. What is the weight of the man on earth
ii. What is the weight of the man on the moon
I promise to mark u the brainliest, please help me
Answer:
2,450
400
Explanation:
Pls brainliest me
an ice cube of density 0.9g/cm3floats in fresh water of density 1g/cm³ what fraction of volume of ice is submerged?
Answer:
9/10
Explanation:
From Archimedes' principle, the buoyant force on the ice equals the weight of water displaced. Since the buoyant force equals the weight of the ice. then
ρ₁V₁g = ρ₂V₂g where ρ₁ = density of ice = 0.9 g/cm³ and V₁ = volume of ice and ρ₂ = density of water = 1 g/cm³ and V₂ = volume of water.
So. ρ₁V₁ = ρ₂V₂
V₁ = ρ₂V₂/ρ₁
= 1 g/cm³V₂/0.9 g/cm³ = 10V₂/9
Now, let x be the fraction of volume of ice submerged. So V = xV₁ = volume submerged. This volume also equals the volume of water since the submerged ice displaces its own volume of water.
So V = V₂
xV₁ = V₂
x(10V₂/9) = V₂
10x/9 = 1
x = 9/10
When the kinetic energy of particles in a substance decreases, what also decreases?
93
The size of the particles in the substance.
The number of particles in the substance.
The substance's specific heat.
The substance's temperature.
Answer: D
The substance's temperature
Explanation:
According to kinetic theory, increase in temperature causes increase in kinetic energy of particles in a system.
When the kinetic energy of particles in a substance decreases, it has nothing to do with the size of the particles and the specific heat capacity of the particles or substance. But it a clear indication that the substance temperature has also decreased.
Answer:
D
Explanation:
Can someone explain what ice jacking is and how it can cause structures to fail?
Answer: Rock slope failures can occur due to the presence of water; ice jacking occurs when water between joint or fissure surfaces freezes and expands. This type of failure is progressive, resulting in incremental weakening over time, often requiring several cycles before failure. Ice jacking is one form of rock erosion.
Please help! 100 points!
What are some ways that the nitrogen cycle overlaps with or influences the oxygen and carbon cycles?
Are any of these interactions between the cycles positive?
Are any negative?
What about when the nitrogen cycle is thrown off balance by the Haber-Bosch process and others like it?
How can that influence the oxygen and carbon cycles?
Are there other cycles involved that have not been mentioned in this question?
What does this discussion suggest about the nature of the Earth as one large system?
Answer:
1.Nitrification happens when soil organisms change over ammonium into nitrate. Much of the cover between the carbon cycle and the nitrogen cycle happens within the soil, in forms conducted by soil organisms. Organisms break down supplements, construct modern compounds for their possess development, and inevitably pass on.
The second question im not sure sorry- the positive and negative one ;(
3. Many human activities have a significant impact on the nitrogen cycle. Burning fossil fuels, application of nitrogen-based fertilizers, and other activities can dramatically increase the amount of biologically available nitrogen in an ecosystem. As nitrogen makes up 78% of the atmosphere, there is no shortage of it – it just isn't in a form plants and animals can use.
4. Carbon makes its way through living things as carbon-based compounds, like vitality particles, fats and proteins, in the long run cycling its way back into the environment. Nitrogen is basically found within the air as well and enters the environments as supplements for plants. Water, nitrogen and carbon cycles. Carbon moves from the air and back by means of creatures and plants. Nitrogen moves from the environment and back by means of living beings. Water moves on, over, or underneath the surface of the Soil.
5. Carbon cycle, Nitrogen cycle, Nutrient cycle, Oxygen cycle, Phosphorus cycle, Sulfur cycle, Rock cycle, Water cycle.
6. Wind, water, and ice disintegrate and shape the arrive. Volcanic movement and seismic tremors change the scene in a sensational and frequently savage way. And on a much longer timescale, the development of earth's plates gradually reconfigures seas and landmasses. Each one of these forms plays a part within the Cold and Antarctica.
People affect the physical environment in numerous ways: overpopulation, contamination, burning fossil powers, and deforestation. Changes like these have activated climate alter, soil disintegration, destitute discuss quality, and undrinkable water. Earth's surface is the as it were territory accessible to the human race. Understanding the forms by which that environment has been made and persistently changed is critical to decide the causes of natural degradation.
The ratio of the magnitude of the frictional force to the magnitude of the force
holding two surfaces together is called the and its UNIT is
Answer: the coefficient of friction
Explanation:
The coefficient of friction (μ (mu)) has no unit because it is a ratio of forces so the units of N (newtons, which are the units of force) cancel out.The magnitude of frictional force is [tex]\mu[/tex]N and the magnitude of the force is N. So if we take the ratio of it we will get [tex]\mu[/tex] In result.
What is the Coefficient of friction?The friction coefficient is the ratio of the normal force pressing two surfaces together to the frictional force preventing motion between them. Typically, the Greek letter is used to symbolize it, i.e., [tex]\mu[/tex]. In mathematical terms, is equal to F/N, where F represents frictional force and N represents normal force. Since both F and N are measured in units of force, the coefficient of friction is a dimensional less quantity (such as newtons or pounds).
For both static and kinetic friction, the coefficient of friction has a range of values. When an object experiences static friction, the frictional force resists any applied force, causing the object to stay at rest until the static frictional force is removed. In kinetic friction, the frictional force resists the motion of the object.
To get more information about the Coefficient of friction :
https://brainly.com/question/13754413
#SPJ2
HELLO.
Hope you are having a nice morning/day/night. PLEASE HELP.
Explain why water storage tanks in houses are erected as high as possible
Answer:
Hello! Thanks! I hope you are too! hope this helps!
Explanation:
The primary reason is to create more water pressure. ... If a municipal water tank is elevated to more than a hundred feet above the ground, there is an increase of . 43 psi per foot. A tank that has been elevated to an appropriate height can create water pressure similar to that created by a large pump
Answer:
✌✌✌✌✌✌✌✌✌✌✌
Explanation:
The primary reason is to create more water pressure. ... If a municipal water tank is elevated to more than a hundred feet above the ground, there is an increase of . 43 psi per foot. A tank that has been elevated to an appropriate height can create water pressure similar to that created by a large pump.
You apply a force of 54 N to a car jack in order to change a tire. Each "Crank" of the jack is exerted over a distance of
64 cm. What is the work input on the car jack? (Hint: 1m = 100 cm)
Step # 1
Step #2
Step #3
Explanation:
Work = force × distance
W = (54 N) (0.64 m)
W ≈ 35 J
Imagine that you have a 500 g iron pot (c = 0.440), a 500 g copper pot (c = 0.385), and a 500 g aluminum pot (c = 0.897). You fill each pot with 250 mL of water and heat the water to 100°C on a stove. Which pot will keep the water warm the longest? Explain your answer.
Answer:
Aluminium
Explanation:
If we calculate the heat transfer for all the substances, we have
Mc(∆T)
Where M is mass
C is heat capacity
∆T is temperature change.
For iron
Mc(∆T) = 500 ×0.440×100= 22000J
For copper
Mc(∆T) = 500 ×0.385×100= 19250J
For aluminium
Mc(∆T) = 500 ×0.897×100= 44850J
Aluminium has the highest heat capacity and would take longest for this heat capacity to be dissipated under similar condition.
Which of these objects has the largest volume?
Answer:
The balloon
Explanation:
Since there are 100 cm or 1000 mm in a meter, you can rewrite the dimensions in the following way:
A cube of metal with a volume of 10,000 mm^3
A spherical balloon with a volume of 50,000,000 mm^3
A sample of water with a volume of 1,000 mm^3
Therefore, the balloon clearly has the most volume. Hope this helps!
Answer:
spherical baloon
Explanation:
change all the measurements to be one I.e convert the m³ and mm³ to cm³
2)1m³=1000000cm³ what about 0.05m³
balloon =50000cm³
3)1cm3=1000mm³
water=1cm³
1)cube=10cm³ so which is the greatest
=spherical baloon
n resistance is each of resistance R is first connected in series and then in parallel what is the ratio of series and parallel combination
Answer:
The ratio of the ratio of series and parallel combination is n²:1.
Explanation:
The equivalent resistance in case of series combination is given by :
[tex]R_s=R_1+R_2+.....+R_n=nR[/tex] ....(1)
The equivalent resistance in case of parallel combination is given by :
[tex]R_P=\dfrac{1}{R_1}+\dfrac{1}{R_2}+.....+\dfrac{1}{R_n}=\dfrac{R}{n}[/tex] ....(2)
Dividing equation (1) and (2) we get :
[tex]\dfrac{R_s}{R_P}=\dfrac{nR}{R/n}\\\\\dfrac{R_s}{R_P}=\dfrac{n^2}{1}\\\\R_s:R_P=n^2:1[/tex]
So, the ratio of the ratio of series and parallel combination is n²:1. Hence, this is the required solution.
n resistance is each of resistance R is first connected in series and then in parallel , the ratio of series and parallel combination will be [tex]n^{2}[/tex] : 1
In a series combination, the resistances are connected with end to end in contact, such that current flow is equal in all the resistances in the combination. Whereas in the parallel combination, resistances are connected in such a manner that they get an equal voltage across their ends.
Parallel combination. When two or more resistances are connected between the same two points, they are said to be connected in parallel combination. The reciprocal of the combined resistance of a number of resistances connected in parallel is equal to the sum of the reciprocals of all the individual resistances.
if n number of resistances are connected in series combination .
R (equivalent ) = R1 + R2 + R3 + R4 -------- + Rn
= R + R + R + R ---------------- + R
= n*R
if n number of resistances are connected in parallel combination .
1/ R (equivalent ) = 1/R1 + 1/R2 + 1/R3 ---------------- 1/Rn
= 1/R + 1/R + 1/R + --------------------- 1/R
= n/R
R (equivalent ) = R/n
Ration = series combination / parallel combination
= n*R / (R/n) = [tex]n^{2}[/tex] /1
= [tex]n^{2}[/tex] : 1
To learn more about parallel combination here
https://brainly.com/question/15048645
#SPJ4
A soccer player kicks a ball with an initial velocity of 10m/s at an angle of 30 degrees above the horizontal. Find the; a) magnitude of the horizontal component b) Vertical component c) The magnitude of the vector.
Answer:
a) V₀ₓ = 8.66 m/s
b) V₀y = 5 m/s
c) Magnitude of velocity vector = 10 m/s
Explanation:
a)
The magnitude of the horizontal component of launch velocity can easily be given by the following formula:
V₀ₓ = V₀ Cos θ
where,
V₀ₓ = horizontal component of velocity = ?
V₀ = Launch Velocity = 10 m/s
θ = Launch Angle of the ball with the horizontal = 30°
Therefore,
V₀ₓ = (10 m/s)(Cos 30°)
V₀ₓ = 8.66 m/s
b)
The magnitude of the vertical component of launch velocity can easily be given by the following formula:
V₀y = V₀ Sin θ
where,
V₀y = vertical component of velocity = ?
V₀ = Launch Velocity = 10 m/s
θ = Launch Angle of the ball with the horizontal = 30°
Therefore,
V₀y = (10 m/s)(Sin 30°)
V₀y = 5 m/s
c)
The magnitude of the velocity vector will be equal to the resultant velocity or net velocity, which is 10 m/s.
Magnitude of Velocity Vector = 10 m/s
What does the phrase "1 meter per second per second" means? A. The velocity of an object can increase by 1 meter per second, for every minute of time measured. B. The velocity of an object can increase by 1 meter per second, for every second of time measured. C. The velocity of an object can increase by 1 meter per second.
Explanation:
"1 meter per second per second" means acceleration of an object. It is equal to the rate of change of velocity. Its SI unit is [tex]m/s^2[/tex].
It is simply given by :
[tex]a=\dfrac{dv}{dt}[/tex]
dv is change in velocity
dt is small interval of time
"1 meter per second per second" means that the velocity of an object can increase by 1 meter per second.