As air pressure decreases, what happens
to the density of the atmosphere?
A. increases
B. decreases
C. stays the same
D. not enough information to tell

Answer:

1992.008J

Explanation:

Answer:

[tex]65.6\ \text{J/m}^3[/tex]

[tex]0.11\ \text{J}[/tex]

Explanation:

B = Magnetic field = [tex]\mu_0 \dfrac{N}{l}I[/tex]

[tex]\mu_0[/tex] = Vacuum permeability = [tex]4\pi10^{-7}\ \text{H/m}[/tex]

N = Number of turns = 1270

[tex]l[/tex] = Length of solenoid = 93.9 cm = 0.939 m

[tex]I[/tex] = Current = 7.8 A

A = Area of solenoid = [tex]17.3\ \text{cm}^2[/tex]

Energy density of a solenoid is given by

[tex]u_m=\dfrac{B^2}{2\mu_0}\\\Rightarrow u_m=\dfrac{(\mu_0 \dfrac{N}{l}I)^2}{2\mu_0}\\\Rightarrow u_m=\dfrac{\mu_0N^2I^2}{2l^2}\\\Rightarrow u_m=\dfrac{4\pi\times 10^{-7}\times 1230^2\times 7.8^2}{2\times 0.939^2}\\\Rightarrow u_m=65.6\ \text{J/m}^3[/tex]

The energy density of the magnetic field inside the solenoid is [tex]65.6\ \text{J/m}^3[/tex]

Energy is given by

[tex]U_m=u_mAl\\\Rightarrow U_m=65.6\times 17.3\times 10^{-4}\times 0.939\\\Rightarrow U_m=0.11\ \text{J}[/tex]

The total energy in joules stored in the magnetic field is [tex]0.11\ \text{J}[/tex].

Answer:

i. 0.2 N ii. 30°

Explanation:

(i) Calculate the magnitude and direction of force on X, when a current of 4A is passed through it.

The magnetic force F = BILsinФ where B = magnetic field strength = 0.1 T, I = current = 4 A and L= length of conductor = 0.5 m. Since the conductor X of length 0.5m is held along the positive X-axis and situated in a uniform horizontal magnetic field of 0.1T which is pointing towards the positive Y-axis, both B and L are perpendicular to each other. So, Ф = 90°

So, F = BILsinФ

F = 0.1 T × 4 A ×0.5 m × sin90°

F = 0.1 T × 4 A ×0.5 m × 1

F = 0.2 N

(ii) Through what angle must X be turned in a vertical plane so that the force on X is halved

If F' = BILsinФ' where Ф'=the new angle, and BIL = F

F'/F = sinФ'

Since F'/F = 1/2

sinФ' = 1/2

Ф' = sin⁻¹(1/2) = 30°

Answer:

B motor

Explanation:

Answer:

the average induced emf in the coil is 0.016 V.

Explanation:

Given;

diameter of the wire, d = 14.1 cm = 0.141 m

change in magnetic filed strength, dB = 0.52 T - 0.23 T = 0.29 T

change in time, dt = 0.28 s

The area of the wire is calculated as follows;

[tex]A = \frac{\pi d^2}{4} \\\\A = \frac{\pi \times (0.141)^2}{4} \\\\A = 0.0156 \ m ^2[/tex]

The induced emf is calculated as follows;

[tex]emf = \frac{dBA}{dt} \\\\emf = \frac{0.29 \times 0.0156}{0.28} \\\\emf = 0.016 \ V[/tex]

Therefore, the average induced emf in the coil is 0.016 V.

Answer: The half-life is the amount of time it takes for a given isotope to lose half of its radioactivity. If a radioisotope has a half-life of 14 days, half of its atoms will have decayed within 14 days. In 14 more days, half of that remaining half will decay, and so on.

Answer:

I guess it is kinetic energy

Answer:

kinetic energy because my dog told me

Answer: B

Explanation:

Answers A and C are examples of physical weathering while B is chemical weathering when water and lime mix it creates a reaction

Correct question is;

A 4-foot spring measures 8 feet long after a mass weighing 8 pounds is attached to it. The medium through which the mass moves offers a damping force numerically equal to √2 times the instantaneous velocity. Find the equation of motion if the mass is initially released from the equilibrium position with a downward velocity of 7 ft/s. (Use g = 32 ft/s²)

Answer:

x(t) = 7te^(-2t√2)

Explanation:

We are given;

Weight; W = 8 lbs

mass; m = W/g

g = 32 ft/s²

Thus;

m = 8/32

m = ¼ slugs

From Newton's second law we can write the equation as;

m(d²x/dt²) = -kx - β(dx/dt)

Rearranging this, we have;

(d²x/dt²) + (β/m)(dx/dt) + (k/m)x = 0

Where;

β is damping constant = √2

k is spring constant = W/s

Where s = 8ft - 4ft = 4ft

k = 8/4

k = 2

Thus,we now have;

(d²x/dt²) + (√2/(¼))(dx/dt) + (2/(¼))x = 0

>> (d²x/dt²) + (4√2)dx/dt + 8x = 0

The auxiliary equation of this is;

m² + (4√2)m + 8 = 0

Using quadratic formula, we have;

m1 = m2 = -2√2

The general solution will be gotten from;

x_t = c1•e^(mt) + c2•t•e^(mt)

Plugging in the relevant values gives;

x_t = c1•e^(mt) + c2•t•e^(mt)

At initial condition of t = 0, x_t = 0 and thus; c1 = 0

Also at initial condition of t = 0, x'(0) = 7 and thus;

Since c1 = 0, then c2 = 7

Thus,equation of motion is;

x(t) = 7te^(-2t√2)

Answer:

K E=( mv²)/2

=(60×3.5²)/2

=367.5J

Answer:

The moon does not stay at the same distance of the earth because the ortbit of the moon is slightly elliptical. If earth is not tilted at an angle of 66.5°, there will be no change in the season and the earth will have equal length of days and night.

Explanation:

mark me brainlest

Answer:

8m/s^2

Explanation:

hope it helps........

Explanation:

you're supposed to know the formula of acceleration which is velocity of a time then you can solve the question

Answer:

1) Magnesium metal/magnesium ion

2) Aluminum/aluminum ion

3)  Copper metal/copper(l) ion

Explanation:

The activity series is a series that shows the ease of reactivity of substances in an electrochemical cell.

The substances that are higher up in the series are more reactive in electrochemical cells.

Magnesium is the first element in the series that has the most negative redox potential  then followed aluminium.

Hence, according to Nernst,

1) Magnesium metal/magnesium ion

2) Aluminum/aluminum ion

3)  Copper metal/copper(l) ion

Answer:

The border is 8km above sea level.

Explanation:

We know that:

Density = 1.25 kg/m^3

Pressure = 10^5 N/m^2

g = 10m/s^2

Now, suppose that we have a virtual rectangle, such that its bases have an area of 1m^2 and the rectangle has a height equal to H.

This virtual figure has a volume V = 1m^2*H, and it is filled with air (which we know that has a density 1.25 kg/m^3)

Then the total mass inside that volume is:

M = (1.25 kg/m^3)*V = (1.25 kg/m^3)*(1m^2*H)

The weight of this mass is:

W = g*M = (10m/s^2)*(1.25 kg/m^3)*(1m^2*H)

And if we divide the weight in a given surface, let's say 1 m^2, we get the pressure per square meter, which we know is equal to  10^5 N/m^2

then:

P = 10^5 N/m^2 = (10m/s^2)*(1.25 kg/m^3)*(1m^2*H)*(1/m^2)

Whit this equation we can find the value of H.

10^5 N/m^2 = (10m/s^2)*(1.25 kg/m^3)*(1m^2*H)*(1/m^2)

10^5 N =  (10m/s^2)*(1.25 kg/m^3)*(1m^2*H)

(10^5 N)/(10 m/s^2) = (1.25 kg/m^3)*(1m^2*H)

(10^4 kg) = (1.25 kg/m^3)*(1m^2*H)

(10^4 kg)/( 1.25 kg/m^3) = 1m^2*H

8,000 m^3 = 1m^2*H

(8,000 m^3)/(1m^2) =H

8,000 m = H

And we want this answer in km, knowing that 1,000m = 1km

8,000m = 8km = H

The border is 8km above sea level.

Height of boundaries is 8.2 km

Normal density = 1.25 kg/m³

1 atm = 101325 N/m²

Height of boundaries

Pressure = Height × Density × Gravitational acceleration

101325 = Height × 1.25 × 9.8

101325 = Height × 12.25

Height of boundaries = 101325 / 12.25

Height of boundaries = 8271.42 m

Height of boundaries = 8.2 km

https://brainly.com/question/23358029

Answer:

r = 14.13 m

Explanation:

Given that,

Charge 1, q₁ = +0.0129 C

Charge 2, q₂ = -0.00707 C

The force between charges, F = 4110 N

We need to find the distance between charges. The formula for the force between charges is given by :

[tex]F=k\dfrac{q_1q_2}{r^2}[/tex]

Where

r is the distance between charges

So,

[tex]r=\sqrt{\dfrac{kq_1q_2}{F}} \\\\r=\sqrt{\dfrac{9\times 10^9\times 0.0129 \times 0.00707 }{4110 }} \\\\r=14.13\ m[/tex]

So, the distance between charges is equal to 14.13 m.

Answer:

14.13 m

Explanation:

acellus

1. third law

2. first law

3. third law

4. second law

The correct statement about the wind is:

Wind is the movement of air currents in relation to the Earth's surface, which is caused by pressure differences and air movement.

Therefore, we can conclude that the wind is the current of air that occurs in the atmosphere due to natural causes, from high pressure areas to low pressure areas.

Learn more about Characteristics of the wind here: https://brainly.com/question/11463167

Answer:

the total momentum of the system before collision is 6.94 kgm/s

Explanation:

Given;

mass of the first cart, m₁ = 2.0 kg

mass of the second cart, m₂ = 1.8 kg

velocity of the first cart before collision, u₁ = 5.9 m/s

velocity of the second cart before collision, u₂ = -2.7 m/s

The total momentum of the system before collision is calculated as follows;

[tex]P_t = P_1 + P_2 \\\\P_t = m_1u_1 + m_2u_2\\\\P_t = (2\times 5.9) + (1.8 \times -2.7)\\\\P_t = 11.8 - 4.86\\\\P_t = 6.94 \ kgm/s[/tex]

Therefore, the total momentum of the system before collision is 6.94 kgm/s

Answer:

too many

Explanation:

The final angular velocity of the carnival ride at a displacement of 6.3 rad is 25.2 rad/s.

The final angular velocity of the carnival ride is determined by applying third kinematic equation as shown below;

ωf = ωi + 2αθ

where;

ωf = 0 + 2(2.0) x 6.3

ωf = 25.2 rad/s

Thus, the final angular velocity of the carnival ride at a displacement of 6.3 rad is 25.2 rad/s.

​

Learn more about angular velocity here: https://brainly.com/question/6860269

Answer: 5.0 rad/s

Explanation: Because that’s what khan said so try it out.

Answer:

e. Combustion

Explanation:

In Combustion reaction, a substance reacts with oxygen from the air and resultant product is that it releases carbon dioxide and water.

Here,

2C2H6 is the substance that reacted with 7O2 (Oxygen) to release 4CO2 (Carbon Dioxide) and 6H2O (Water).

Answer:

a) f = 4.76 10¹⁴ Hz, b) d = 2.73 10⁻⁴ m, c) θ = 6.923 10⁻³ rad

Explanation:

a) In this problem the frequency of light is asked, let's use the relationship between the speed of the wave, its wavelength and its frequency

           c = λ f

           f = c /λ

           f = [tex]\frac{3 \ 10^8}{630 \ 10^{-9}}[/tex]

           f = 4.76 10¹⁴ Hz

b) slit separation (d)

the expression for the constructive interference of the double-slit experiment is

          d sin  θ = m λ

let's use trigonometry

          tan θ = y / L

          tan θ = [tex]\frac{sin \theta}{cos \theta}[/tex]

in general the angles are small, so we can approximate

          tan θ = sin θ

          tan θ = y/L

we substitute

          d y / L = m λ

          d = m L λ / y

we calculate

          d = 3  1.3  630 10⁻⁹ /0.90 10⁻²

          d = 2.73 10⁻⁴ m

c) the angle

           tan θ = y / L

           θ = tan⁻¹ y / L

           θ = tan⁻¹ 0.9 10⁻² / 1.3

           θ = tan⁻¹ 6,923 10⁻³

let's find the angle in radians

           θ = 6.923 10⁻³ rad

Answer:

-2.2cm

Explanation:

A dentist uses a concave mirror to examine a tooth that is 1.00 cm in front of the mirror. The image of the tooth forms 10.0 cm behind the mirror. What is the mirror's radius of curvature 0.909 m.

To determine the mirror's radius of curvature, we can use the mirror formula:

1/f = 1/v - 1/u

Where:

f is the focal length of the mirror

v is the image distance (distance of the image from the mirror)

u is the object distance (distance of the object from the mirror)

In this case, the object distance (u) is 1.00 cm and the image distance (v) is -10.0 cm (since the image is formed behind the mirror, the distance is negative).

1/f = 1/(-10.0) - 1/(1.00)

Simplifying the equation:

1/f = -0.1 - 1

1/f = -1.1

Now, we can find the reciprocal of both sides of the equation:

f/1 = -1/1.1

f ≈ -0.909 m

The negative sign indicates that the mirror is concave.

Therefore, the mirror's radius of curvature is approximately 0.909 m.

To know more about Mirror :

https://brainly.com/question/116014

#SPJ2.

Answer:

velocity = 37.01 m/s

Explanation:

momentum = mass * velocity

61250 = 1655 * x

x = 61250 / 1655

x = 37.0090634441

The data table for the decomposition reaction of hydrogen peroxide H₂ O₂ shows down over time as the reactant rate get used up.

What is rate, reaction and rate of reaction?

Rate- The rate of a particular chemical reaction is calculated by dividing the rate of change in a reactant's or product's concentration by the coefficient from the given balanced equation.

Reactions- They are defined as the change of a chemical substance into an innovative substance through the formation and breaking of bonds among distinct atoms.

Rate of reaction- It is defined as the ratio of the increase in product concentration per unit time to the decrease in reactant concentration per unit time. The rate of reaction varies greatly.

It can be seen that with the concentration, the rate of decomposition is also decreased. Generally, it is found that as per hour concentration and rate of decomposition decreases as well.

Therefore, (A) option is the correct answer.

To learn more about rate,refer here :

https://brainly.com/question/12904152

#SPJ2

Answer:

Why does it take sometimes to be brighter again after eclipse? The moon looks dimmer before lunar eclipse because the moon enters into shadow of penumbra region of earth. As a result, the brightness of moon decreases and looks dimmer.

Explanation:

Answer: The moon looks dimmer before lunar eclipse because the moon enters into shadow of penumbra region of earth. As a result, the brightness of moon decreases and looks dimmer.

Explanation: