Answer: (e) The pressure in the container increases but does not double.
Explanation:
To solve this, we need to first remember our gas law, Boyle's law states that the pressure and volume of a gas have an inverse relationship. That is, If volume increases, then pressure decreases and vice versa, when temperature is held constant. Therefore, increasing the volume in this case does not double the pressure owning to out gas law, but an increase in pressure would be noticed if temperature is constant
The pressure in the container increases but does not double.
At constant temperature and volume, the pressure of a given mass of gas is directly proportional to the number of moles of gas present.
Number of moles of He = 10 g/4 g/mol = 2.5 moles
Number of moles of Ne = 10 g/20 g/mol = 0.5 moles
We can see that the number of moles only increases by 1/5 of its initial value therefore, the pressure in the container increases but does not double.
Learn more: https://brainly.com/question/8646601
For the aqueous reaction dihydroxyacetone phosphate↽−−⇀glyceraldehyde−3−phosphate dihydroxyacetone phosphate↽−−⇀glyceraldehyde−3−phosphate the standard change in Gibbs free energy is ΔG°′=7.53 kJ/molΔG°′=7.53 kJ/mol . Calculate ΔGΔG for this reaction at 298 K298 K when [dihydroxyacetone phosphate]=0.100 M[dihydroxyacetone phosphate]=0.100 M and [glyceraldehyde-3-phosphate]=0.00200 M[glyceraldehyde-3-phosphate]=0.00200 M .
Answer:
ΔG = -2.17 kJ/mol
Explanation:
ΔG of a reaction at any moment could be obtained thus:
ΔG = ΔG° + RT ln Q
Where ΔG° is standard change in free energy of a particular reaction (7.53kJ/mol for the reaction of the problem, R is gas constant (8.314×10⁻³kJ/molK), T is absolute temperature (298K) and Q is reaction quotient of the reaction.
For the reaction:
dihydroxyacetone phosphate ⇄ glyceraldehyde−3−phosphate
Q is defined as:
Q = [glyceraldehyde−3−phosphate] / [dihydroxyacetone phosphate]
Replacing values in ΔG formula:
ΔG = 7.53kJ/mol + 8.314×10⁻³kJ/molK × 298.15K ln [0.00200M] / [0.100M]
ΔG = -2.17 kJ/mol
which statement describes the reactions in an electrochemical cell
Answer & explanation:
Summary on electrochemical cells and redox reactions:
Electrochemical cells (or batteries) can be defined as devices capable of transforming chemical energy into electrical energy through spontaneous reactions of redox, in which electron transfer occurs.
Redox it is a chemical reaction in which there is the occurrence of oxidation and reduction of atoms of substances (chemical species) present in the process.
Oxidation is the loss of electrons by an atom of a chemical species, while reduction is the gain of electrons by an atom of a chemical species.
Thus, during an oxirreduction reaction, electrons move from the species that loses them towards the species that will receive them. This "movement" results in the formation of an electric current (or electrical energy) as occurs with batteries, for example.
How many kg of gas fill a 11.6 gal gas tank
Answer:
43.964
Explanation:
i think i used a calculator so let me know if its wrong
Answer:
39.49 kg
Explanation:
:)
A sample of thallium(III) peroxide, Tl2(O2)3, contains 2.45 mol of thallium(III) ions. The number of moles of peroxide ions in the sample is
Answer:
The correct answer is 3.675 moles.
Explanation:
Based on the question, the reaction taking place is,
Tl₂(O₂)₃ ⇒ 2Tl⁺³ + 3O₂⁻²
Thus, 1 mole of thallium peroxide comprise 2 moles of thallium and 3 moles of peroxide ions.
However, based on the given question, a sample of thallium peroxide comprise 2.45 moles of thallium ions. The moles of peroxide ions present in the sample will be,
= 2.45 × 3 / 2
= 3.675 moles.
Hence, the moles of peroxide ions present in the given sample is 3.675.
complite the following reactions. NaOH(aq)+FeBr3(aq)→
Answer:
3NaOH+FeBr3>3NaBr+
Fe(OH)3
Explanation:
After writing the equation it has to be balanced
Which statement best describes information that would be associated with science rather than with pseudoscience?
Answer:
The information has been changed to support a claim
Explanation:
Compound H is optically active and has the molecular formula C6H10 and has a five carbon ring. On catalytic hydrogenation, H is converted to I (C6H12) and I is optically inactive. Propose structures for H and I. (Draw a three-dimensional formula for each using dashes and wedges around chiral centers.)
Answer:
Explanation:
Given that ;
Compound H is optically active and have a molecular formula of C6H10 and therefore undergo catalytic hydrogenation. Catalytic hydrogenation involves the use Platinum/Nickel to produce C6H12
i.e
[tex]C_6H_{10} +H_2 \to ^{Pt/Ni} \ \ \ C_6H_{12}[/tex]
The proposed H and I structures are shown in the diagrams attached below .
compound H represents 3- methyl cyclopentene
compound I represents methyl cyclopentane
However; 3- methyl cyclopentene posses just only one chiral carbon which is optically active at the third position and it R and S enantiomers are shown in the second diagram below.
The starting material is 3-methylcyclopentene while the optically inactive product is 1-methyl cyclopentane.
Hydrogenation refers to the addition of hydrogen across the double bond of an unsaturated compound. Hydrogenation results in the formation of a saturated compound having two more hydrogen atoms than the starting material.
The starting material is optically active 3-methylcyclopentene. The R and S enantiomers of the starting material is shown in image (1) attached. The optically inactive product is, 1-methyl cyclopentane is shown in image (2) attached.
Learn more: https://brainly.com/question/6249935
The decomposition of hydrogen peroxide, H2O2, has been used to provide thrust in the control jets of various space vehicles. Determine how much heat (in kJ) is produced by the decomposition of 1.71 mol of H2O2 under standard conditions.
Answer:
[tex]Q=-361.56kJ[/tex]
Explanation:
Hello,
In this case, the decomposition of hydrogen peroxide is given by:
[tex]2H_2O_2\rightarrow 2H_2O+O_2[/tex]
Which occurs in gaseous phase, therefore the enthalpy of reaction is:
[tex]\Delta _rH=2\Delta _fH_{H_2O}-2\Delta _fH_{H_2O_2}[/tex]
Oxygen is not included as it is a pure element. The enthalpies of formation for both hydrogen peroxide and water are -136.11 and -241.83 kJ/mol respectively, so we compute the enthalpy of reaction:
[tex]\Delta _rH=2(-241.83kJ/mol)-2(-136.11kJ/mol)=-211.44kJ/mol[/tex]
Then, the total heat that is released for 1.71 mol of hydrogen peroxide is:
[tex]Q=n*\Delta _rH=1.71mol*-211.44kJ/mol\\\\Q=-361.56kJ[/tex]
Whose sign means a released heat.
Regards.
Given the information you now know, what is the effect of hyperventilation on blood pH?pH? During hyperventilation, the rapid in the blood CO2CO2 concentration shifts the equilibrium to the which the concentration of H+,H+, thereby the blood pH.
Answer:
When hypercapnia processes occur, where the concentration of carbon dioxide gas increases in the blood, the protonization of the blood increases, this means that the H + ions increase in concentration, thus generating metabolic acidosis.
This metabolic acidosis is regulated by various systems, but the respiratory system collaborates by generating hyperventilation, to increase blood oxygen pressures, decrease CO2 emissions, and indirectly decrease acidity.
Explanation:
This method of regulating the body is crucial, since the proteins in our body will not be altered if they do not happen.
The enzymes, the red globules, and many more fundamental things for life ARE PROTEINS, that in front of acidic media these modify their structure by denaturing themselves and ceasing to fulfill their functions. This is the reason why it seeks to neutralize the blood pH when it comes to an increase in CO2.
what is the name of the liquid in the clinical thermometer
Answer:I suppose it is mercury...
Explanation:
I don't say u must have to mark my ans as brainliest but if it has really helped u plz don't forget to thnk me...
g The solution you created in this simulation was a 0.300M NH4Cl solution. The lab also stated that, in g/L, this concentration was 16.0 g/L. Show the calculations that prove that to be true.
Answer:
16.0473 g/L
Explanation:
0.300 M=
0.300 mol/L x 53.491 grams/mol = 16.0473 grams/L
The concentration of the 0.300M NH₄Cl solution in g/L will be equal to 16.04 g/L.
What is the molarity?The concentration of the solution can be determined if we have the molecular formula of the compound and its molecular weight. We can easily determine the majority of a solution from the moles of solute and the volume of the solution.
The molarity of a solution can be evaluated from the number of moles of a solute per liter of a solution.
The Molarity can be determined from the formula mentioned below:
Molarity (M) = Moles of solute (n)/Solution's volume ( in L)
Given, the molarity of NH₄Cl solution = 0.300 M
We can also write it as 0.300 mol/L
It means 0.300 moles in one liter.
The molar mass of NH₄Cl = 53.5 g/mol
Then the mass of 0.300 mol of NH₄Cl = 0.300 ×53.5 = 16.04 g
Therefore, the concentration of NH₄Cl solution is 16.04g/L is equivalent to 0.300 M.
Learn more about molarity, here:
brainly.com/question/8732513
#SPJ5
Solids in which the atoms have no particular order or pattern are called what solids
Answer:
Amorphous solids .
Explanation:
They have no particular order or pattern.Each particle is in a particular spot, but the particles are in no organized pattern.
An electrochemical cell is constructed with a zinc metal anode in contact with a 0.052 M solution of zinc nitrate and a silver cathode in contact with a 0.0042 M solution of silver(I) nitrate. What is the value of Q to use in the Nernst equation for this cell
Answer:
Q = 12.38
Explanation:
The Nernst equation is given as; Ecell = E°cell - (2.303RT/nF) log Q ;where Q is the reaction quotient.
The reaction quotient, Q in a reaction, is the product of the concentrations of the products divided by the product of the concentrations of the reactants.
In an electrochemical cell, Q is the ratio of the concentration of the electrolyte at the anode to that of the electrolyte at the cathode.
Q = [anode]/[cathode]
therefore , Q = 0.052/0.0042 = 12.38
Liquid hexane will react with gaseous oxygen to produce gaseous carbon dioxide and gaseous water . Suppose 4.3 g of hexane is mixed with 7.14 g of oxygen. Calculate the maximum mass of carbon dioxide that could be produced by the chemical reaction. Round your answer to significant digits.
Answer:
We can produce 6.20 grams of CO2
Explanation:
Step 1: Data given
Mass of hexane = 4.3 grams
Molar mass of hexane = 86.18 g/mol
Mass of oxygen = 7.14 grams
Molar mass of oxygen = 32.0 g/mol
Step 2: The balanced equation
2C6H14 + 19O2 → 12CO2 + 14H2O
Step 3: Calculate moles
Moles = mass / molar mass
Moles hexane = 4.3 grams / 86.18 g/mol
Moles hexane = 0.0499 moles
Moles oxygen = 7.14 grams / 32.0 g/mol
Moles oxygen = 0.2231 moles
Step 4: Calculate the limiting reactant
For 2 moles hexane we need 19 moles O2 to produce 12 moles CO2 and 14 moles H2O
Oxygen is the limiting reactant. It will completely be consumed ( 0.2231 moles). Hexane is in excess. There will react 2/19 * 0.2231 = 0.02348 moles
There will be porduced 12/19 * 0.2231 = 0.1409 moles CO2
Step 5: Calculate mass CO2
Mass CO2 = moles CO2 * molar mass CO2
Mass CO2 = 0.1409 moles * 44.01 g/mol
Mass CO2 = 6.20 grams
We can produce 6.20 grams of CO2
For some hypothetical metal the equilibrium number of vacancies at 750°C is 2.8 × 1024 m−3. If the density and atomic weight of this metal are 5.60 g/cm3 and 65.6 g/mol, respectively, calculate the fraction of vacancies for this metal at 750°C.
Answer:
The correct answer is 5.447 × 10⁻⁵ vacancies per atom.
Explanation:
Based on the given question, the at 750 degree C the number of vacancies or Nv is 2.8 × 10²⁴ m⁻³. The density of the metal is 5.60 g/cm³ or 5.60 × 10⁶ g/m³. The atomic weight of the metal given is 65.6 gram per mole. In order to determine the fraction of vacancies, the formula to be used is,
Fv = Nv/N------ (i)
Here Nv is the number of vacancies and N is the number of atomic sites per unit volume. To find N, the formula to be used is,
N = NA×P/A, here NA is the Avogadro's number, which is equivalent to 6.022 × 10²³ atoms per mol, P is the density and A is the atomic weight. Now putting the values we get,
N = 6.022 × 10²³ atoms/mol × 5.60 × 10⁶ g/m³ / 65.6 g/mol
N = 5.14073 × 10²⁸ atoms/m³
Now putting the values of Nv and N in the equation (i) we get,
Fv = 2.8 × 10²⁴ m⁻³ / 5.14073 × 10²⁸ atoms/m^3
Fv = 5.44669 × 10⁻⁵ vacancies per atom or 5.447 × 10⁻⁵ vacancies/atom.
The reaction of hydrogen bromide(g) with chlorine(g) to form hydrogen chloride(g) and bromine(g) proceeds as follows: 2HBr(g) + Cl2(g)2HCl(g) + Br2(g) When 23.9 g HBr(g) reacts with sufficient Cl2(g), 12.0 kJ is evolved. Calculate the value of rH for the chemical equation given.
Answer:
The enthalpy of reaction per mole of HBr for this reaction = ΔrH = -40.62 kJ/mole.
Explanation:
2HBr(g) + Cl2(g) → 2HCl(g) + Br2(g)
When 23.9 g HBr(g) reacts with sufficient Cl2(g), 12.0 kJ of heat is evolved, calculate the value of ΔrH for the chemical reaction.
Note that ΔrH is the enthalpy per mole for the reaction.
Molar mass of HBr (g) = 80.91 g/mol.
Hence, 1 mole of HBr = 80.91 g
23.9 g of HBr led to the reaction giving off 12.0 kJ of heat
80.91 g of HBr will lead to the evolution of (80.91 × 12/23.9) = 40.62 kJ heat is given off.
Hence, 40.62 kJ of heat is given off per 80.91 g of HBr.
This directly translates to that 40.62 kJ of heat is given off per 1 mole of HBr
Hence, the heat given off per mole of HBr for this reaction is 40.62 kJ/mole.
But since the reaction liberates heat, it means the reaction is exothermic and the enthalpy change for the reaction (ΔHrxn) is negative.
Hence, ΔrH = -40.62 kJ/mole.
Hope this Helps!!!
Isomer such as acetic acid and methyl formate have
Answer:
C
Explanation:
This is the definition of an isomer.
How do forces between particles in liquids compare to forces in tho other states of matter?
Answer:I hope it will be beneficial for you
Force of attraction between the particles of solid is very strong the particles of solid are held together by strong inter molecular forces leading to the formation of a rigid structure
Force of attraction between the particles of the liquid is weak as compare to solids there particles are far away from each other and have the property to move easily.
Force of attraction between the particles of gases is very weak than the two states hence the particles of gases are highly compressible having week intermolecular interaction between them and have indefinite shape and volume
Answer:
Forces between particles in Liquids are closely packed compared to other states of matter like the liquid and gaseous state of matter.
Explanation:
Which metal can replace another metal in a reaction
Answer:
The products of the reaction are aqueous magnesium nitrate and solid copper metal. This subcategory of single-replacement reactions is called a metal replacement reaction because it is a metal that is being replaced (zinc)
Explanation:
The products of the reaction are aqueous magnesium nitrate and solid copper metal. This subcategory of single-replacement reactions is called a metal replacement reaction because it is a metal that is being replaced (zinc)
Acetonitrile, CH3CN, is a polar organic solvent that dissolves many solutes, including many salts. The density of a 1.80 M acetonitrile solution of LiBr is 0.826 g/mL. Calculate the concentration of the solution in units of (a) molality; (b) mole fraction of LiBr; (c) mass percentage of CH3CN.
Answer:
(a) [tex]m=2.69m[/tex]
(b) [tex]x_{LiBr}=0.099[/tex]
(c) [tex]\% LiBr=18.9\%[/tex]
Explanation:
Hello,
In this case, given the molality in mol/L, we can compute the required units of concentration assuming a 1-L solution of acetonitrile and lithium bromide that has 1.80 moles of lithium bromide:
(a) For the molality, we first compute the grams of lithium bromide in 1.80 moles by using its molar mass:
[tex]m_{LiBr}=1.80mol*\frac{86.845 g}{1mol}=156.32g[/tex]
Next, we compute the mass of the solution:
[tex]m_{solution}=1L*0.826\frac{g}{mL}*\frac{1000mL}{1L}=826g[/tex]
Then, the mass of the solvent (acetonitrile) in kg:
[tex]m_{solvent}=(826g-156.32g)*\frac{1kg}{1000g}=0.670kg[/tex]
Finally, the molality:
[tex]m=\frac{1.80mol}{0.670kg} \\\\m=2.69m[/tex]
(b) For the mole fraction, we first compute the moles of solvent (acetonitrile):
[tex]n_{solvent}=669.68g*\frac{1mol}{41.05 g} =16.31mol[/tex]
Then, the mole fraction of lithium bromide:
[tex]x_{LiBr}=\frac{1.80mol}{1.80mol+16.31mol}\\ \\x_{LiBr}=0.099[/tex]
(c) Finally, the mass percentage with the previously computed masses:
[tex]\% LiBr=\frac{156.32g}{826g}*100\%\\ \\\% LiBr=18.9\%[/tex]
Regards.
BASIC CALCULATIONS IN SPECTROSCOPY
1. Calculate the %T of light at 425nm if the light entering the cell is 200 lumens and the amount of light exiting the cell is 50 lumens.
2. Calculate the absorbance of the above problem.
Answer: 25%
Explanation:
1. Transmittance, T= P/P0
Where P = light exiting the cell
P0 = light entering the cell
Therefore %T = P/P0 ×100
= 50/200×100
=25%
2. Absorbance, A= -log(T)
But T= 0.25
Therefore A= -log(0.25)
= 0.6020
An ethylene glycol solution contains 21.4 g of ethylene glycol (C2H6O2) in 97.6 mL of water.
Required:
a. Determine the freezing point of the solution. Express you answer in degrees Celsius. (Assume a density of 1.00 g/mL for water.)
b. Compute the boiling point of the solution. (Assume a density of 1.00 g/mL for water.)
Answer:
a. TFinal = -6.57°C
b. Tfinal = 101.80°C
Explanation:
When a solute is added to a solvent producing an ideal solution, the freezing point of the solution decreases with regard to pure solvent. Also, boiling point increases with regard to pure solvent.
The formulas are:
Freezing point:
ΔT = Kf×m×i
Where Kf is freezeing point depression constant of water (1.86°C/m), m is molality of solution and i is van't Hoff factor (1 for ethylene glycol).
Boiling point:
ΔT = Kb×m×i
Where K is freezeing point depression constant of water (0.51°C/m), m is molality of solution and i is van't Hoff factor (1 for ethylene glycol).
Moles of 21.4g of ethylene glycol (Molar mass: 62.07g/mol) are:
21.4g C₂H₆O₂ ₓ (1mol / 62.07g) = 0.345 moles
And kg of 97.6mL of water = 97.6g are 0.0976kg. Molality of the solution is:
0.345mol / 0.0976kg = 3.5325m
Replacing in the formulas:
a. Freezing point:
ΔT = 1.86C/m×3.5325m×1
ΔT = 6.57°C
0°C - Tfinal = 6.57°C
TFinal = -6.57°Cb. Boiling point:
ΔT = 0.51°C/m×3.5325m×1
ΔT = 1.80°C
Tfinal - 100°C = 1.80°C
Tfinal = 101.80°C
4.The reaction of 0.25 g magnesium with 100.0 mL of 2 M hydrochloric acid (density d = 1.039 g/ml) raises the temperature of the solution from 20.0 °C to 35.0 °C. The specific heat for HCl is 3.98 J/(g.C). Mg(s) + 2HCl(aq) —> MgCl2(aq) + H2(g) Calculate the heat of the reaction. (Use the equation Q = s . m .ΔT where s is the specific heat, m is the mass of solution and ΔT is the change in temperature)
Answer:
[tex]Q=450.14J[/tex]
Explanation:
Hello,
In this case, for the given equation to compute the heat, we should compute the mass of the solution of hydrochloric acid, thus, the first step is to compute its reacting mass:
[tex]m_{HCl}^{reacting}=2\frac{mol}{L}*0.1000L *\frac{36.45g}{1mol}=7.29g[/tex]
Then, we obtain the total mass of the formed solution:
[tex]m=0.25g+7.29g=7.54g[/tex]
In such a way, we can infer that the specific heat of the solution is mainly the specific heat of hydrochloric acid, therefore the heat turns out:
[tex]Q=3.98\frac{J}{g\°C} *7.54g*(35.0\°C-20.0\°C)\\\\Q=450.14J[/tex]
Regards.
Which of the following is not an example of a mechanical wave?
A. Fans doing "The Wave" at a sporting event.
B. Sound waves coming out of the radio.
C. Water waves at hie beach.
D. Sunshine.
Answer:
Option D
Explanation:
A mechanical wave is a wave of energy that can travel long distances and could go through characteristics of matter such as solids, liquids, and gases. Mechanical waves can also travel through vacuums. A good example of a mechanical wave would be sound, sound is a wave spread through a object and can go through different types of matter. Which is why your answer is option D "sunshine." Light cannot go through a vacuum while sounds, and water can.
Hope this helps.
The mechanical wave example does not include the sunshine
What is mechanical waves ?It is the wave of energy that can travel long distances and considered the characteristics of matter like solids, liquids, and gases. It can also travel via vacuums. The Light cannot go via a vacuum while sounds, and water can go.
Learn more about sound here:https://brainly.com/question/16750970
Humans have three types of cone cells in their eyes, which are responsible for color vision. Each type absorbs a certain part of the visible spectrum. Suppose a particular cone cell absorbs light with a wavelength of 434.nm. Calculate the frequency of this light. Round your answer to 3 significant digits.
Answer:
6.91 × 10¹⁴ s⁻¹
Explanation:
Step 1: Given data
Wavelength of the radiation absorbed by the cone (λ): 434 nm
Step 2: Convert the wavelength to meters
We will use the relationship 1 m = 10⁹ nm.
[tex]434nm \times \frac{1m}{10^{9}nm } =4.34 \times 10^{-7} m[/tex]
Step 3: Calculate the frequency (ν) of the radiation
We will use the following expression.
[tex]c = \lambda \times \nu[/tex]
where,
c is the speed of light (3.00 × 10⁸ m/s)
[tex]c = \lambda \times \nu\\\nu = \frac{c}{\lambda} = \frac{3.00 \times 10^{8}m/s }{4.34 \times 10^{-7}m }= 6.91 \times 10^{14} s^{-1}[/tex]
50.0 g N204 (92.02 g/mol) react with 45.0 g N2H4 (32.05 g/mol) forming nitrogen gas, N2
(28.01 g/mol) and water, H20 (18.02 g/mol). What mass in grams of excess-reactant is
left over?
Answer:
The excess reactant is N2H4 and the leftover mass is 10.17g.
Explanation:
Step 1:
The balanced equation for the reaction.
N2O4 + 2N2H4 —> 3N2 + 4H2O
Step 2
Determination of the masses of N2O4 and N2H4 that reacted from the balanced equation:
Molar mass of N2O4 = 92.02 g/mol
Mass of N2O4 from the balanced equation = 1 x 92.02 = 92.02g
Molar mass of N2H4 = 32.05 g/mol
Mass of N2H4 from the balanced equation = 2 x 32.05 = 64.1g
From the balanced equation above, 92.02g of N2O4 reacted with 64.1g of N2H4.
Step 3:
Determination of the excess reactant. This is illustrated below:
From the balanced equation above, 92.02g of N2O4 reacted with 64.1g of N2H4.
Therefore, 50g of N2O4 will react with = (50 x 64.1)/92.02 = 34.83g of N2H4.
From the calculations made above, we can see that only 34.83g of N2H4 reacted out of 45g that was given. Therefore, N2H4 is the excess reactant.
Step 4:
Determination of the mass of excess reactant that is leftover.
The excess reactant is N2H4 and the leftover mass can be obtained as follow:
Mass of N2H4 given = 45g
Mass of N2H4 that reacted = 34.83g
Leftover mass of N2H4 =..?
Leftover mass of N2H4 = (Mass of N2H4 given) – (Mass of N2H4 that reacted)
Leftover mass of N2H4 = 45 – 34.83
Leftover mass of N2H4 = = 10.17g.
Heat is added to a 1.0-kg block of ice at OC. Determine if the process is
endothermic or exothermic. Explain your answer. *
Answer:
endothermic
Explanation:
Heat is added to make the process possible.
Based on this information what is the most likely reason for refrigerating most foods reduce the rate at which they spoil
Answer: The lower temperature reduces molecule speeds, reducing the number of effective collisions.
Explanation:
What are the number of protons, neutrons, and electrons in 19 F
9?
Answer:
This isotope of fluorine has 9 protons, 9 electrons and 10 neutrons.
Explanation:
3. Scientific methods may include three steps of study as listed below. Explain each step in detail with a complete content related sentence. (ref: p.12-16) a. Hypothesis b. Theory c. Scientific law
Answer:
Hypothesis is an assumption or idea about a particular topic or argument. An hypothesis should be one which is able to be tested and measurable to determine its authenticity.
A theory is an explanation of a scientific observation which has undergone series of experiments and is reproducible in any part of the world.
A law is simply a rule which gives an in depth explanation of a scientific finding. If new findings emerge the law could be changed or modified.