Answer:
A. 3,000,000 m
B. 0.25 km
C. 10 m
D. 1,000 cm
Explanation:
no hablo español, así que solo ingrese esto en el traductor de G*ogle
A. One kilometer equals 1000 meters, so
3,000*1,000 = 3,000,000 m
B. One meter equals 0.001 kilometer, so
250*0.001 = 0.25 km
C. One centimeter equals 0.01 meter
1,000*0.01 = 10 m
D. One milimeter equals 0.1 centimer, so
10,000*0.1 = 1,000
One of the ways in which a coin operated vending machine checks to make sure that the coins fed to it are genuine is to roll them past a strong magnet. Group of answer choices Coins made of a good conductor will slow down as they roll past the magnet. Coins made of a good conductor will speed up as they roll past the magnet. Only coins made of magnetic materials such as iron will be affected by the magnet. The coins will become magnetized and thus can easily be sorted.
Answer:
Coins made of a good conductor will slow down as they roll past the magnet.
Explanation:
Conduction involves the transfer of electric charge or thermal energy due to the movement of particles. When the conduction relates to electric charge, it is known as electrical conduction while when it relates to thermal energy, it is known as heat conduction.
One of the ways in which a coin operated vending machine checks to make sure that the coins fed to it are genuine is to roll them past a strong magnet. As such, coins made of a good conductor will slow down as they roll past the magnet due to the force of attraction that exists between the magnet and the coin (metal).
This ultimately implies that, the magnet tends to attract the coin to itself and as such slowing down the motion of the coin. Similarly, if it's a fake coin, it simply means it would be a bad conductor and as such it will roll fast past the strong magnet.
Light is incident perpendicularly from air onto a liquid film that is on a glass plate. The liquid film is 70.2 nm thick, and the liquid has index of refraction 1.50. The glass has index of refraction 1.40. Calculate the longest visible wavelength (as measured in air) of the light for which there will be totally constructive interference between the rays reflected from the top and bottom surfaces of the film. Assume that the visible spectrum lies between 400 nm and 700 nm.
Answer:
λ₀ = 421.2 10⁻⁹ m
Explanation:
This is an exercise in constructive interference by reflection, let's review some concepts:
* When a ray goes from a medium with a lower index to one with a higher index, it undergoes a phase change of 180º, in this case we have a phase change from the air to the film
* Within the material the wavelength changes according to the spare part index of the material
λₙ = λ₀ / n
By including these two aspects, the constructive interference equation remains
2 n t = (m + ½) λ₀
λ₀ = [tex]\frac{2nt}{m+ \frac{1}{2} }[/tex]
we substitute
λ₀ = 2 1.50 70.2 10⁻⁹ / (m + ½)
let's substitute some values of m
m = 0
λ₀ = [tex]\frac{210.06}{0.5}[/tex] 10⁻⁹
λ₀ = 421.2 10⁻⁹ m
is in the visible range
m = 1
λ₀ = [tex]\frac{210.6}{1+0.5}[/tex] 10⁻⁹
λ₀ = 140.4 10⁻⁹ m
This outside visible range, is ultraviolet light
Rita is a salon owner. She notices that her salon charged one of her clients, Linda, extra for a service that the clent did not request. What do you think Rita should do? Α. Remaln qulet about the extra money. B. Distribute the money equally among the staff. C. Call the client and Inform her that she was incorrectly charged. D. Try overcharging the next client too and check if it goes unnoticed.
Answer:
C hope it helps
call the client and inform her that she was incorrectly charged.
Answer:
The answer is C. call the client and inform her that she was incorrectky charged
Explanation:
Explain why, in terms of forces, there is a risk of head injury when diving from this height. Suggest why the high divers would choose to enter the water feet first.
Answer:
Due to lower risk of injury or damage.
Explanation:
The high divers would choose to enter the water from the feet first because there is low risk of injury. The brain is the most important part of the body which very sensitive to any small injury. Small injury to brain leads to big problems in life. High divers can reach speeds of nearly 60 mph and enters about 28m into the water in about three seconds which can damage the head region if comes in contact with the ground so this is the reason the high divers avoid of entering in the water through their heads and choose entering through their feet.
When forming a ion, oxygen will have what charge?
Answer:
it will have a charge of -2
Explanation:
The 500-N force F is applied to the vertical pole as shown(1) Determine the scalar components of the force vector F along the x'- and y'-axes. (2) Determine the scalar components of F along the x- and y'-axes.
Solution :
Given :
Force, F = 500 N
Let [tex]$ \vec F = F_x\ \hat i + F_y\ \hat j$[/tex]
[tex]$|\vec F|=\sqrt{F_x^2+F_y^2}$[/tex]
∴ [tex]$F_x=F \cos 60^\circ = 500 \ \cos 60^\circ = 250 \ N$[/tex]
[tex]$F_y=-F \cos 30^\circ = -500 \ \cos 30^\circ = -433.01 \ N$[/tex] (since [tex]$F_y$[/tex] direction is in negative y-axis)
[tex]$F=250 \ \hat i - 433.01 \ \hat j$[/tex]
So scalar components are : 250 N and 433.01 N
vector components are : [tex]$250 \ \hat i$[/tex] and [tex]$-433.01\ \hat j$[/tex]
1. Scalar components along :
x' axis = 500 N, since the force is in this direction.
[tex]$F_{x'}= F \ \cos \theta = 500\ \cos \theta$[/tex]
Here, θ = 0° , since force and axis in the same direction.
So, cos θ = cos 0° = 1
∴ [tex]$F_{x'}=500 \times 1=500\ N$[/tex]
[tex]$F_{y'}= F \ \sin \theta = 500\ \sin 0^\circ=500 \times 0=0$[/tex]
[tex]$F_{y'}=F\ cos \theta$[/tex] but here θ is 90°. So the force ad axis are perpendicular to each other.
[tex]$F_{y'}=F\ \cos 90^\circ= 500 \ \cos 90^\circ = 500 \times 0=0$[/tex]
∴ [tex]$F_{x'}= 500\ N \text{ and}\ F_{y'}=0\ N$[/tex]
2. Scalar components of F along:
x-axis :
[tex]$F_x=F\ \cos \theta$[/tex], here θ is the angle between x-axis and F = 60°.
[tex]$F_x=500 \times \cos60^\circ=250\ N$[/tex]
y'-axis :
[tex]$F_{y'}=F\ \cos \theta$[/tex], here θ is the angle between y'-axis and F = 90°.
[tex]$F_{y'}=500 \times \cos90^\circ=500\times 0=0\ N$[/tex]
∴ [tex]$F_{x}= 250\ N \text{ and}\ F_{y'}=0\ N$[/tex]
A 13 500 N car traveling at 50.0 km/h rounds a curve of radius 2.00 × 102 m. Find the following: a. the centripetal acceleration of the car b. the centripetal force c. the minimum coefficient of static friction between the tires and the road that will allow the car to round the curve safely
Answer:
a. 0.947 m/s^2
b. 1304.54 N
c. 0.0966
Explanation:
mass of car = 13500 N = 13500/9.8 = 1377.55 kg
velocity = 50 km/h = 50,000 m/h = 13.9 m/s
raidus = 204 m
a. centripetal acceleartion = v^2/r = 13.9^2/204 = 0.947 m/s^2
b. centripetal force = m*centripetal acceleration = 1377.55 * 0.947 = 1304.54 N
c. In order for the car to round the curve safely, static friction = centripetal force
static friction = coefficient of friction (mu) * mg = mu* 1377.55*9.8 = 13500mu
13500mu = 1304.54
mu = 1304.54/13500 = 0.0966
The acceleration, force and coefficient of friction is required.
Centripetal acceleration is [tex]0.965\ \text{m/s}^2[/tex]
Centripetal force is [tex]1328\ \text{N}[/tex]
Coefficient of friction is [tex]0.1[/tex]
N = Weight of car = 13500 N
v = Velocity = [tex]50=\dfrac{50}{3.6}=13.89\ \text{m/s}[/tex]
r = Radius = [tex]2\times 10^2\ \text{m}[/tex]
m = Mass of car = [tex]\dfrac{N}{g}[/tex]
g = Acceleration due to gravity = [tex]9.81\ \text{m/s}^2[/tex]
Centripetal acceleration is
[tex]a_c=\dfrac{v^2}{r}\\\Rightarrow a_c=\dfrac{13.89^2}{2\times 10^2}\\\Rightarrow a_c=0.965\ \text{m/s}^2[/tex]
Force is given by
[tex]F_c=ma_c\\\Rightarrow F_c=\dfrac{N}{g}a_c\\\Rightarrow F_c=\dfrac{13500}{9.81}\times 0.965\\\Rightarrow F_c=1328\ \text{N}[/tex]
Coefficient of friction is given by
[tex]\mu=\dfrac{F_c}{N}\\\Rightarrow \mu=\dfrac{1328}{13500}\\\Rightarrow \mu=0.098\approx 0.1[/tex]
Learn more:
https://brainly.com/question/19487466?referrer=searchResults
Which is denser?
The water in a swimming pool or a quarter (coin).
Answer:
The coin is denser than any of the liquids, and will sink through everything. The oil is the least dense liquid, so it will float on the water, and the syrup is the densest liquid, so it will sink below the water.
Explanation:
cute copy and paste? ☏ ♡ ☆⋆◦★◦⋆°*•°
. * . . ° . ● ° .
¸ . ★ ° :. . • ° . * :. ☆
° :. ° .☆ . ● .° °★
★ ★°★ . * . °☆ . ● . ★ ° . • ○ ● . ☆ ★ ° ☆ ¸. ¸ ★ . • ° . *
¸ . ★ ° :. :. . ¸ . ● ¸ ° ¸. * ● ¸ °☆
☆ °☆ . * ● ¸ . ★¸ .
. * . . ° . ● ° .
° :. ° . ☆ . . • . ● .° °★ Not sure how to copy and paste? Just right click your mouse and choose copy in options, to release repeat the process and just paste it. No mouse? Select the text with your computer pad and use ctrl c to release, ctrl v. On mobile? Press on your screen and select the text, use the option copy and paste wherever you would like!
You can use the information below to calculate it :)
Density of water: 1000 kg/m3.
Density of the coin: copper 8.96 g/cm^3
nickel 8.90 g/cm^3
1 kg = 1000 g
All you have to do now is convert it and thats it
An object's inertia is its tendency to maintain contact:
1.) Mass.
2.) Position.
3.) Acceleration.
4.) Velocity.
hello! it is velocity.
i say this because, Inertia is the tendency of an object to resist changes in its state of motion. ... The state of motion of an object is defined by its velocity - the speed with a direction.
GIVING BRAINLIEST PLEASE HELP!!
-if you answer correctly ill give you brainliest which will give you 27pts-
Answer:
C. The lever applies three times more force than you hand can apply.
Explanation:
Since it's advantage is 3, that means you'll have to multiply the input of it by 3, making this apply 3x more force than your hand.
Hope this helped! <3
Source(s): Me and a bit of g*ogle for clarification
1.45 L of 16°C water is placed in a refrigerator. The refrigerator's motor must supply an extra 10.7 W power to chill the water to 6°C in 0.7 hr. What is the refrigerator's coefficient of performance?
Answer:
The coefficient of performance of the refrigerator is 2.251.
Explanation:
In this case, the coefficient of performance of the refrigerator ([tex]COP[/tex]), no unit, is equal to the ratio of the heat rate received from the water to the power needed to work, that is:
[tex]COP = \frac{\dot Q_{L}}{\dot W}[/tex] (1)
[tex]COP = \frac{\rho\cdot V\cdot c_{w}\cdot \Delta T}{\dot W \cdot \Delta t}[/tex] (2)
Where:
[tex]\dot Q_{L}[/tex] - Heat rate received from the water, in watts.
[tex]\dot W[/tex] - Power, in watts.
[tex]\rho[/tex] - Density of water, in kilograms per cubic meter.
[tex]V[/tex] - Volume of water, in cubic meters.
[tex]c_{w}[/tex] - Specific heat of water, in joules per kilogram-degree Celsius.
[tex]\Delta T[/tex] - Temperature change, in degrees Celsius.
[tex]\Delta t[/tex] - Cooling time, in seconds.
If we know that [tex]\rho = 1000\,\frac{kg}{m^{3}}[/tex], [tex]V = 1.45\times 10^{-3}\,m^{3}[/tex], [tex]c_{w} = 4187\,\frac{J}{kg\cdot ^{ \circ}C}[/tex], [tex]\Delta T = 10\,^{\circ}C[/tex], [tex]\dot W = 10.7\,W[/tex] and [tex]\Delta t = 2520\,s[/tex], then the coefficient of refrigeration of the refrigerator is:
[tex]COP = \frac{\rho\cdot V\cdot c_{w}\cdot \Delta T}{\dot W \cdot \Delta t}[/tex]
[tex]COP = 2.251[/tex]
The coefficient of performance of the refrigerator is 2.251.
In your own words, tell me how an element, molecule, and compound are used to make different substances. All three must be mentioned in order to receive full credit.
Answer:
When atoms from different elements are joined together in groups, they form molecules. The atoms in molecules bind together chemically, which means that the atoms cannot be separated again by physical means, such as filtration. The molecule has different properties from the elements from which is was made.
Explanation:
Light travels at a speed of 3.0 ´ 108 m/s. If it takes light from the sun 5.0 ´ 102 s to reach Earth, what is the distance between Earth and the sun?
Answer:
The distance between the Earth and the Sun is:
1.5 multiplied by 10 raised to the power 8 km
Explanation:
(5.0 x 10²) x (3.0 x 10⁸) = 1.5 x 10¹¹ meters = 1.5 x 10⁸ km.
A heavy piano is pushed up an inclined plane into a moving van. Which of the following choices best explains how the inclined plane made the task easier?
1. The force needed to move the piano up the plane was less than the force needed to lift it straight up into the van, but the distance over which the piano moved was greater.
2.The force exerted on the piano was the same as if it had been lifted, but the distance it needed to be move decreased, so the total work decreased.
3.The distance that the piano was moved was less that the distance it would have had to be lifted, so the total work decreased.
4. The amount of force need to push the piano up the ramp is the same as the force needed to lift it, so the amount of work remained the same.
The term mechanical advantage has to do with the ratio of the load to the effort.
What is mechanical advantage?
The term mechanical advantage has to do with the ratio of the load to the effort. There is a mechanical advantage when the effort applied is less than the load.
Hence, the task is made easier because the force needed to move the piano up the plane was less than the force needed to lift it straight up into the van, but the distance over which the piano moved was greater.
Learn more about mechanical advantage:https://brainly.com/question/20521425
#SPJ1
am i right? please help!
The device shown below contains 2 kg of water. When the cylinder is allowed to fall 250 m, the temperature of the water increases by 1.4°C. Suppose 2 kg of water are added to the container and the cylinder is allowed to fall 750 m. What would the increase in temperature be in this case? Gizmo image A. 0.7°C B. 1.4°C C. 2.1°C D. 2.8°C
Answer:c. 2.1°C
Explanation:
I just did it
It is much more difficult to move a dresser full of clothes than an empty dresser
Answer:
Newton's Law 2
Hope this helps!
What’s an insulator?
A.Material does not conduct electrical current
B.Material that conducts electrical current
C.Other
Answer: a substance which does not readily allow the passage of heat or sound. so I think A or C but I pick A
Explanation:
Jenise is buying a car for $7,020. The TAVT rate is 9.1%.
What is the amount of tax that Jenise will have to pay on her car?
Answer:
$7,658.82
Explanation:
Sales Tax Calculations:
Sales Tax Amount = Net Price x (Sales Tax Percentage / 100)
Total Price = Net Price + Sales Tax Amount
Net Price: $ 7,020.00
+Sales Tax (9.1%): $ 638.82
Total Price: $ 7,658.82
Therefore, the amount of tax that Jenise has to pay on her car is $7,658.82
EMERGENCY
Parallax
Find the distance to the following stars:
.768”
.09”
.63”
.25”
.125”
'If you increase the frequency of a sound wave four times, what will happen to its speed?
ОА.
The speed will increase four times.
OB.
The speed will decrease four times.
O c.
The speed will remain the same.
OD
The speed will increase twice.
O E.
The speed will decrease twice.
differences between mass and weight
Explanation:
Mass : -
1. It is the amount of mass present in an object.
2. SI unit : Kilograms ( kg )
3. Relation between Mass and Weight is W = mg.
Weight : -
1. It is the force with which it is attracted towards the centre of the earth.
2. SI unit : Newton ( N )
3. Relation between Mass and Weight is W = mg.
Mass is a measure of the amount of matter in an object, while weight is a measure of the force of gravity on the object.
Which of the following results when most or all of the neutrons released in a
fission reaction encounter other nuclei?
PLSSS HELPP
If humans are evolving, who is having the biggest effect on humanities gene pool? Rich vs poor? Educated vs uneducated? Certain countries over others? Etc.? And how will this affect our evolution in the future?
Answer:
Well, if you look up countries with the highest birth rates, also those countries poverty rates and what class the majority of the people are in then you should have a better understanding. Also, education is not passed through genes it is learned through expirience and being taught. Also being rich vs being poor probably doesn't have that big of an effect either. It is the living conditions.
Explanation:
The forces shaping the short-term future of man, perhaps to the turn of this century, are apparent, and the events are in train. The shape of the world in the year 2000 and man's place therein will be determined by the manner in which organized humanity confronts several major challenges. If sufficiently successful, and mankind escapes the dark abysses of its own making, then truly will the future belong to man, the only product of biological evolution capable of controlling its own further destiny.
please mark in brain list
How would you classify an EM wave with a frequency of 10^7 Hz?
Answer:
I think it is television and radio wave
If the harmonic is 66 Hz, find the fundamental frequency
The behavior of the light incident upon this page best illustrates the phenomenon of
A)
diffuse reflection
B)
regular reflection
C)
diffraction
D)
refraction
Answer:
diffraction
Explanation:
The behavior of the light incident upon this page best illustrates the phenomenon of diffraction
hope it help:)
The behaviour of such incident light on just this pages adequately exemplifies the phenomena called Diffraction. A further explanation is below.
DiffractionThe broadening out of waveforms when they transit through such an apertures anywhere around obstructions generally referred to as diffraction.
It happens whenever the aperture as well as obstruction seems of the equivalent order of magnitude as that of the transmitted beam's wavelength.
Thus the approach above i.e., option C is correct.
Find out more information about Diffraction here:
https://brainly.com/question/16749356
find the torque when the work done to more through an angel of 1/4π radians is 3j
Answer:
The torque is approximately 3.82 N·m
Explanation:
The relationship between work done, 'W', and the applied torque, 'τ' can be presented as follows;
W = τ × Δθ
Where;
W = The work done by the torque
τ = The magnitude of the torque
Δθ = The angle through which the object is turned
The parameters for 'W' and 'Δθ' are;
W = 3j
Δθ = 1/4 × π
From W = τ × Δθ, we have;
τ = W/Δθ
∴ τ = 3j/(1/4 × π) ≈ 3.81971863421 N·m
The torque, τ ≈ 3.82 N·m
Here is a list of ways of producing electricity
A ) Wind farms
B ) Coal fired power stations
C ) hydroelectric power stations
D ) nuclear power stations
E ) gas fired power stations
F ) tidal power stations
G) using geothermal energy
(1) State which of these produces clean electricity
(2) State which of these uses fossils fuel
(3) state which of these uses a renewable energy resources
Please help me
Please do not answer from links
Urgent !!!!!!
Will give the brainliest!
* please answer correctly
Answer:
1) A,B,F,G
2)B,D,E
3) A,C,F,G
Explanation:
The ancient Egyptians build their pyramids using a ramp to move the heavy blocks up. The length of the ramp was 25m and the height was 10m the weight of the block was 250kg and the effort weight is 180kg. What is the efficiency of the inclined plane
Answer:
Efficiency of the inclined plane is 56%
Explanation:
efficiency = (work output / work input) x 100%
efficiency = ([load force x load distance] x [effort force x effort distance]) x 100%
efficiency = (250 kg x 10 m) / (180 kg x 25 m) x 100%
efficiency = (2500kg/m) / (4500kg/m) x 100%
efficiency = 0.555 = 0.56 x 100%
efficiency = 56%