Fill in the blank: If an atom is in column V (or 15), it will most likely ____________ to fulfill the octet rule.

Gain 3 electrons

Lose 5 electrons

Gain 5 electrons

Lose 5 protons

Gain 3 protons

Answer:

The enthalpy of reaction per mole of HBr for this reaction = ΔrH = -40.62 kJ/mole.

Explanation:

2HBr(g) + Cl2(g) → 2HCl(g) + Br2(g)

When 23.9 g HBr(g) reacts with sufficient Cl2(g), 12.0 kJ of heat is evolved, calculate the value of ΔrH for the chemical reaction.

Note that ΔrH is the enthalpy per mole for the reaction.

Molar mass of HBr (g) = 80.91 g/mol.

Hence, 1 mole of HBr = 80.91 g

23.9 g of HBr led to the reaction giving off 12.0 kJ of heat

80.91 g of HBr will lead to the evolution of (80.91 × 12/23.9) = 40.62 kJ heat is given off.

Hence, 40.62 kJ of heat is given off per 80.91 g of HBr.

This directly translates to that 40.62 kJ of heat is given off per 1 mole of HBr

Hence, the heat given off per mole of HBr for this reaction is 40.62 kJ/mole.

But since the reaction liberates heat, it means the reaction is exothermic and the enthalpy change for the reaction (ΔHrxn) is negative.

Hence, ΔrH = -40.62 kJ/mole.

Hope this Helps!!!

Answer:

The excess reactant is N2H4 and the leftover mass is 10.17g.

Explanation:

Step 1:

The balanced equation for the reaction.

N2O4 + 2N2H4 —> 3N2 + 4H2O

Step 2

Determination of the masses of N2O4 and N2H4 that reacted from the balanced equation:

Molar mass of N2O4 = 92.02 g/mol

Mass of N2O4 from the balanced equation = 1 x 92.02 = 92.02g

Molar mass of N2H4 = 32.05 g/mol

Mass of N2H4 from the balanced equation = 2 x 32.05 = 64.1g

From the balanced equation above, 92.02g of N2O4 reacted with 64.1g of N2H4.

Step 3:

Determination of the excess reactant. This is illustrated below:

From the balanced equation above, 92.02g of N2O4 reacted with 64.1g of N2H4.

Therefore, 50g of N2O4 will react with = (50 x 64.1)/92.02 = 34.83g of N2H4.

From the calculations made above, we can see that only 34.83g of N2H4 reacted out of 45g that was given. Therefore, N2H4 is the excess reactant.

Step 4:

Determination of the mass of excess reactant that is leftover.

The excess reactant is N2H4 and the leftover mass can be obtained as follow:

Mass of N2H4 given = 45g

Mass of N2H4 that reacted = 34.83g

Leftover mass of N2H4 =..?

Leftover mass of N2H4 = (Mass of N2H4 given) – (Mass of N2H4 that reacted)

Leftover mass of N2H4 = 45 – 34.83

Leftover mass of N2H4 = = 10.17g.

Answer:

H3PO4 + 5HCl  → PCl5 + 4H2O

Explanation:

In a chemical reaction, the number of atoms of each element must be the same on both sides of the equation. Notice that, originally, there's only one atom of chlorine on the left side and five atoms of chlorine on the right. The coefficient of 5 is added to the HCl compound to correct this. However, now there are eight atoms of hydrogen on the left and only two on the right. Adding the coefficient of 4 to the H2O compound balances the hydrogen and also balances oxygen on both sides at the same time.

The balanced chemical equation for the reaction:

H₃PO₄ + 5HCl → PCl₅ + 4H₂O (last option)

To write the balance equation for any given reaction, all we need to do is to ensure that the number of atoms in the reacting species and products formed are equal on both sides of the equation.

The balanced chemical equation for the reaction given in the question can be obtained as follow:

H₃PO₄ + HCl → PCl₅ + H₂O

There are 5 atoms of Cl on the right side and 1 atom on the left. It can be balanced by writing 5 before HCl as shown below:

H₃PO₄ + 5HCl → PCl₅ + H₂O

There are a total of 8 atoms of H on the left side and 2 atoms on the right. It can be balanced by writing 4 before H₂O as shown below:

H₃PO₄ + 5HCl → PCl₅ + 4H₂O

Now, we can see that the number of atoms in the reactants and products are equal.

Thus, the balanced equation for the reaction is

H₃PO₄ + 5HCl → PCl₅ + 4H₂O (last option)

Learn more about balancing equation:

https://brainly.com/question/12192253

#SPJ6

Answer:

[tex]Q=-361.56kJ[/tex]

Explanation:

Hello,

In this case, the decomposition of hydrogen peroxide is given by:

[tex]2H_2O_2\rightarrow 2H_2O+O_2[/tex]

Which occurs in gaseous phase, therefore the enthalpy of reaction is:

[tex]\Delta _rH=2\Delta _fH_{H_2O}-2\Delta _fH_{H_2O_2}[/tex]

Oxygen is not included as it is a pure element. The enthalpies of formation for both hydrogen peroxide and water are -136.11 and -241.83 kJ/mol respectively, so we compute the enthalpy of reaction:

[tex]\Delta _rH=2(-241.83kJ/mol)-2(-136.11kJ/mol)=-211.44kJ/mol[/tex]

Then, the total heat that is released for 1.71 mol of hydrogen peroxide is:

[tex]Q=n*\Delta _rH=1.71mol*-211.44kJ/mol\\\\Q=-361.56kJ[/tex]

Whose sign means a released heat.

Regards.

Answer: 25%

Explanation:  

1. Transmittance, T= P/P0  

Where P = light exiting the cell

           P0 = light entering the cell

Therefore %T =  P/P0 ×100

           = 50/200×100

=25%

2. Absorbance, A= -log(T)

But T= 0.25

Therefore A= -log(0.25)

                  = 0.6020

Answer:

ΔG = -2.17 kJ/mol

Explanation:

ΔG of a reaction at any moment could be obtained thus:

ΔG = ΔG° + RT ln Q

Where ΔG° is standard change in free energy of a particular reaction (7.53kJ/mol for the reaction of the problem, R is gas constant (8.314×10⁻³kJ/molK), T is absolute temperature (298K) and Q is reaction quotient of the reaction.

For the reaction:

dihydroxyacetone phosphate ⇄ glyceraldehyde−3−phosphate

Q is defined as:

Q = [glyceraldehyde−3−phosphate] / [dihydroxyacetone phosphate]

Replacing values in ΔG formula:

ΔG = 7.53kJ/mol + 8.314×10⁻³kJ/molK × 298.15K ln [0.00200M] / [0.100M]

ΔG = -2.17 kJ/mol

Answer:

endothermic

Explanation:

Heat is added to make the process possible.

Answer:

The correct answer is 3.675 moles.

Explanation:

Based on the question, the reaction taking place is,  

Tl₂(O₂)₃ ⇒ 2Tl⁺³ + 3O₂⁻²

Thus, 1 mole of thallium peroxide comprise 2 moles of thallium and 3 moles of peroxide ions.  

However, based on the given question, a sample of thallium peroxide comprise 2.45 moles of thallium ions. The moles of peroxide ions present in the sample will be,  

= 2.45 × 3 / 2

= 3.675 moles.  

Hence, the moles of peroxide ions present in the given sample is 3.675.  

Answer:

3NaOH+FeBr3>3NaBr+

Fe(OH)3

Explanation:

After writing the equation it has to be balanced

Answer:I hope it will be beneficial for you

Force of attraction between the particles of solid is very strong the particles of solid are held together by strong inter molecular forces leading to the formation of a rigid structure

Force of attraction between the particles of the liquid is weak as compare to solids there particles are far away from each other and have the property to move easily.

Force of attraction between the particles of gases is very weak than the two states hence the particles of gases are highly compressible having week intermolecular interaction between them and have indefinite shape and volume

Answer:

Forces between particles in Liquids are closely packed  compared to other states of matter like the liquid and gaseous state of matter.

Explanation:

Answer:

Hypothesis is an assumption or idea about a particular topic or argument. An hypothesis should be one which is able to be tested and measurable to determine its authenticity.

A theory is an explanation of a scientific observation which has undergone series of experiments and is reproducible in any part of the world.

A law is simply a rule which gives an in depth explanation of a scientific finding. If new findings emerge the law could be changed or modified.

Answer:

This isotope of fluorine has 9 protons, 9 electrons and 10 neutrons.

Explanation:

Answer:

43.964

Explanation:

i think i used a calculator so let me know if its wrong

Answer:

39.49 kg

Explanation:

:)

Answer: The lower temperature reduces molecule speeds, reducing the number of effective collisions.

Explanation:

Answer:

The information has been changed to support a claim

Explanation:

Answer & explanation:

Summary on electrochemical cells and redox reactions:

Electrochemical cells (or batteries) can be defined as devices capable of transforming chemical energy into electrical energy through spontaneous reactions of redox, in which electron transfer occurs.

Redox it is a chemical reaction in which there is the occurrence of oxidation and reduction of atoms of substances (chemical species) present in the process.

Oxidation is the loss of electrons by an atom of a chemical species, while reduction is the gain of electrons by an atom of a chemical species.

Thus, during an oxirreduction reaction, electrons move from the species that loses them towards the species that will receive them. This "movement" results in the formation of an electric current (or electrical energy) as occurs with batteries, for example.

Answer:

Explanation:

The larger sediment particles are having more weright(mass), hence fall quickly (early) and smaller particles with low mass are carried by wind for longer time and falls slowly ,  hence you observe sorted kind of things. Hope this helps you to understadn this phenomenon.

Answer:

6.91 × 10¹⁴ s⁻¹

Explanation:

Step 1: Given data

Wavelength of the radiation absorbed by the cone (λ): 434 nm

Step 2: Convert the wavelength to meters

We will use the relationship 1 m = 10⁹ nm.

[tex]434nm \times \frac{1m}{10^{9}nm } =4.34 \times 10^{-7} m[/tex]

Step 3: Calculate the frequency (ν) of the radiation

We will use the following expression.

[tex]c = \lambda \times \nu[/tex]

where,

c is the speed of light (3.00 × 10⁸ m/s)

[tex]c = \lambda \times \nu\\\nu = \frac{c}{\lambda} = \frac{3.00 \times 10^{8}m/s }{4.34 \times 10^{-7}m }= 6.91 \times 10^{14} s^{-1}[/tex]

Answer:

Q = 12.38

Explanation:

The Nernst equation is given as; Ecell = E°cell - (2.303RT/nF) log Q  ;where Q is the reaction quotient.

The reaction quotient, Q  in a reaction, is the product of the concentrations of the products divided by the product of the concentrations of the reactants.

In an electrochemical cell, Q is the ratio of the concentration of the electrolyte at the anode to that of the electrolyte at the cathode.

Q = [anode]/[cathode]

therefore , Q = 0.052/0.0042 = 12.38

Answer:

The products of the reaction are aqueous magnesium nitrate and solid copper metal. This subcategory of single-replacement reactions is called a metal replacement reaction because it is a metal that is being replaced (zinc)

Explanation:

The products of the reaction are aqueous magnesium nitrate and solid copper metal. This subcategory of single-replacement reactions is called a metal replacement reaction because it is a metal that is being replaced (zinc)

Answer:

Amorphous solids .

Explanation:

They have no particular order or pattern.Each particle is in a particular spot, but the particles are in no organized pattern.

Answer:

Option D

Explanation:

A mechanical wave is a wave of energy that can travel long distances and could go through characteristics of matter such as solids, liquids, and gases. Mechanical waves can also travel through vacuums. A good example of a mechanical wave would be sound, sound is a wave spread through a object and can go through different types of matter. Which is why your answer is option D "sunshine." Light cannot go through a vacuum while sounds, and water can.

Hope this helps.

The mechanical wave example does not include the sunshine

It is the wave of energy that can travel long distances and considered the characteristics of matter like solids, liquids, and gases. It can also travel via vacuums. The Light cannot go via a vacuum while sounds, and water can go.

Learn more about sound here:https://brainly.com/question/16750970

Answer:

answer is in exaplation

Explanation:

Answer. Chemical reaction had occurred and both the powders are different substances.

Explanation:

As density is an intensive property of the substance.Which means that different substance have different densities.

Density = \frac{mass}{volume}

volume

mass

Density of powder 1, d_1=\frac{0.5g}{45cm^3}=0.11g/cm^3d

1

=

45cm

3

0.5g

=0.11g/cm

3

Density of powder 2, d_2=\frac{1.3g}{65cm^3}=0.02g/cm^3d

2

=

65cm

3

1.3g

=0.02g/cm

3

On comparing both the densities of the powders we can say that both the substances are different. So we can conclude that the chemical reaction had occurred.

Answer:

When hypercapnia processes occur, where the concentration of carbon dioxide gas increases in the blood, the protonization of the blood increases, this means that the H + ions increase in concentration, thus generating metabolic acidosis.

This metabolic acidosis is regulated by various systems, but the respiratory system collaborates by generating hyperventilation, to increase blood oxygen pressures, decrease CO2 emissions, and indirectly decrease acidity.

Explanation:

This method of regulating the body is crucial, since the proteins in our body will not be altered if they do not happen.

The enzymes, the red globules, and many more fundamental things for life ARE PROTEINS, that in front of acidic media these modify their structure by denaturing themselves and ceasing to fulfill their functions. This is the reason why it seeks to neutralize the blood pH when it comes to an increase in CO2.

Answer:

C

Explanation:

This is the definition of an isomer.

Answer:

a. TFinal = -6.57°C

b. Tfinal = 101.80°C

Explanation:

When a solute is added to a solvent producing an ideal solution, the freezing point of the solution decreases with regard to pure solvent. Also, boiling point increases with regard to pure solvent.

The formulas are:

Freezing point:

ΔT = Kf×m×i

Where Kf is freezeing point depression constant of water (1.86°C/m), m is molality of solution and i is van't Hoff factor (1 for ethylene glycol).

Boiling point:

ΔT = Kb×m×i

Where K is freezeing point depression constant of water (0.51°C/m), m is molality of solution and i is van't Hoff factor (1 for ethylene glycol).

Moles of 21.4g of ethylene glycol (Molar mass: 62.07g/mol) are:

21.4g C₂H₆O₂ ₓ (1mol / 62.07g) = 0.345 moles

And kg of 97.6mL of water = 97.6g are 0.0976kg. Molality of the solution is:

0.345mol / 0.0976kg = 3.5325m

Replacing in the formulas:

a. Freezing point:

ΔT = 1.86C/m×3.5325m×1

ΔT = 6.57°C

0°C - Tfinal = 6.57°C

b. Boiling point:

ΔT = 0.51°C/m×3.5325m×1

ΔT = 1.80°C

Tfinal - 100°C = 1.80°C

Answer:

THE STANDARD HEAT OF NEUTRALIZATION OF THE BASE SODIUM HYDROXIDE BY THE ACID HYDROGEN TRIOXONITRATE V ACID IS -56 kJ / mol.

Explanation:

Volume of 0.3 M NaOh = 100 mL

Volume of 0.3 M HNO3 = 100 mL

Initail temp of NaOH and HNO3 = 35 °C = 35 + 273 K = 308 K

Final temp. of mixture = 37 °C = 37 + 273 K = 310 K

We can make the following assumptions form the question given:

1. specific heat of the reaction mixture is the same as the specific heat of water = 4.2 J/g K

2. the toal mass of the reaction mixture is 200 mL = 200 g since no heat is lost to the calorimeter or surrounding.

3. initail temperature of the reaction mixture is equal to the average temperature of the two reactant solutions

= ( 308 + 308 /2) = 308 K

4. Rise in temeperature for the reaction = 310 -308 K = 2 K

Then the total heat evolved during the reaction = mass * specifc heat capacity * temperature  change

Heat = 200 g * 4.2 J/g K * 2 K

Heat = 1680 J

EQUATION FOR THE REACTION

HNO3 + NaOH -------> NaNO3 + H20

From the equation, 1 mole of HNO3 reacts with 1 mole of NaOH to prouce  mole of water.

100 mL of 0.5 M HNO3 contains 100 * 0.3 /1000 = 0.03 mole of acid

This result is same for the base NaOH = 0.03 mole of base

So therefore,

0.03 mole of acid will react with 0.03 mole of base to produce 0.03 mole of water to evolved 1680 J of heat energy.

The production of 1 mole of water will evolve 1680 / 0.03 J of heat

= 56 000 J or 56 kJ of heat energy per mole of water.

So therefore, 1the standard heat of neutralization of sodium hydroxide by trioxoxnitrate V acid is -56 kJ/mol.

Answer:

Explanation:

Given that ;

Compound H is optically active and have a molecular formula of C6H10 and therefore undergo catalytic hydrogenation. Catalytic hydrogenation involves the use Platinum/Nickel to produce C6H12

i.e

[tex]C_6H_{10} +H_2 \to ^{Pt/Ni} \ \ \ C_6H_{12}[/tex]

The proposed H and I structures are shown in the diagrams attached below .

compound H represents  3- methyl cyclopentene

compound I represents methyl cyclopentane

However; 3- methyl cyclopentene posses just only one chiral carbon which is optically active at the third position and it R and S enantiomers are shown in the second diagram below.

The starting material is  3-methylcyclopentene while the optically inactive product is 1-methyl cyclopentane.

Hydrogenation refers to the addition of hydrogen across the double bond of an unsaturated compound. Hydrogenation results in the formation of a saturated compound having two more hydrogen atoms than the starting material.

The starting material is optically active 3-methylcyclopentene. The R and S enantiomers of the starting material is shown in image (1) attached. The optically inactive product is, 1-methyl cyclopentane is shown in image (2) attached.

Learn more: https://brainly.com/question/6249935

Answer:

Kc = [Pb²⁺]³.[PO₄³⁻]²

Explanation:

Let's consider the following reaction at equilibrium.

Pb₃(PO₄)₂(s) ⇄ 3 Pb²⁺(aq) + 2 PO₄³⁻(aq)

The concentration equilibrium constant is the product of the concentrations of the products raised to their stoichiometric coefficients divided by the product of the concentrations of the reactants raised to their stoichiometric coefficients. It only includes gases and aqueous species.

Kc = [Pb²⁺]³.[PO₄³⁻]²

This equilibrium constant is known as the solubility product of Pb₃(PO₄)₂.

Answer:

[tex]Q=450.14J[/tex]

Explanation:

Hello,

In this case, for the given equation to compute the heat, we should compute the mass of the solution of hydrochloric acid, thus, the first step is to compute its reacting mass:

[tex]m_{HCl}^{reacting}=2\frac{mol}{L}*0.1000L *\frac{36.45g}{1mol}=7.29g[/tex]

Then, we obtain the total mass of the formed solution:

[tex]m=0.25g+7.29g=7.54g[/tex]

In such a way, we can infer that the specific heat of the solution is mainly the specific heat of hydrochloric acid, therefore the heat turns out:

[tex]Q=3.98\frac{J}{g\°C} *7.54g*(35.0\°C-20.0\°C)\\\\Q=450.14J[/tex]

Regards.