GIVING BRAINLYY
Tracy is looking at the section of the periodic table shown below. Based on the positions of sodium (Na) and potassium (K) in the table, Tracy can predict that sodium what?
Answers
[tex]\huge\boxed{Option B}[/tex]
____________________________________PERIODIC TABLE:The periodic table, arranges the chemical elements ascording to their recurring properties. The number of each element corresponds to the number of protons in its nucleus.
-------------------------------------------------------------------------------------------Groups and PeriodsThere are 8 groups and 7 periods in the periodic table.
_________________________________________________________
Each element within a group has similar physical or chemical properties because of its atom's outermost electron shell. The outermost shell of every element in a specific group has same number of valence shell (most chemical properties are determined by the the outermost valence shell electron). The group number of an element represents the number of electrons in its outermost orbit. This shows that elements arranged in the same group have the same number of electrons in their outermost orbit.
_____________________________________Sodium and PotassiumSodium and Potassium belong to the same group i.e. GROUP 1 which is also called S BLOCK Group or IONIC GROUP. They have the similar properties,
__________________________________________________________
Properties of S block Elements
1- They are soft metals
2- possess low melting and boiling points
3- They have the largest atomic radii in their corresponding periods
4- are good conductors of heat and electricity.
5- They have low values of ionization energies and are hence highly electropositive.
_____________________________________Best Regards,'Borz'Related Questions
What can you infer about particle's size?
Answers
Answer:
particle size analysis, particle size measurement, or simply particle sizing is the collective name of the technical procedures, or laboratory techniques which determines the size range, and/or the average, or mean size of the particles in a powder or liquid sample.
Explanation:
Which of the following is the best way to model the process of weathering?
Using a fan on a pile of sand causing the sand to move into a pile in a new location.
Using a ramp to dump sand at the bottom causing the sand to pile up.
Using a watering can sprinkle water onto sand causing the sand to move to a new location.
Filling a glass bottle with water and allowing it to freeze causing the bottle to break.
Answers
The best model of weathering is using a fan on a pile of sand causing the sand to move into a pile in a new location.
Weathering refers to the gradual breakdown of a rock due to the agents of denudation. The agents of denudation could be physical, chemical or biological.
The breakdown of rocks leads to the formation of soil. The closest model to the weathering of rock is using a fan on a pile of sand causing the sand to move into a pile in a new location.
The pile represents the rock which is being broken down as the fan blows the pile and it settles on a new location.
Learn more: https://brainly.com/question/14426457
does formaldehyde classified as a pure substance or a mixture
Answers
Answer:
pure substance
Explanation:
it is a naturally occuring compound
Answer:
Formaldehyde is a mixed substance. It is made up of Carbon, 2 Hydrogen, and an Oxygen.
Explanation:
The formula is CH2O
What happens during every chemical change?
A. Heat or light is produced.
B. Two substances combine to make a different substance.
C. One type of matter becomes another type of matter.
D. Matter changes from one state to another.
pleaase helpppp
Answers
Answer:
D
Explanation:
ahh i think,
AHH JUST LET ME SEND ITTT
Answer:
its one type of matter becomes another type of matter
Explanation:
it was that for a p e x
Use the decoder to get the lock combination
Answers
Answer:
u didnt attach an image or anything so this is quite confusing.
Explanation:
??
Answer:
Okay
Explanation:
science againnnnnn helppp!!!!!
Answers
Answer: this is not my own words :)
Learn how factors, such as exposure to the atmosphere, the composition of rock and climate affect the rate of weathering. Weathering is the mechanical or chemical process by which rocks are broken down. The weathering that happens to rocks can be understood by relating it to the digestion of a chocolate chip cookie
One of the factors that affects the rate of weathering is exposure to the atmosphere. ... Another factor that affects the rate of weathering is the composition of rock. Rocks are composed of minerals, which are solid substances found within rocks that have their own distinct chemical composition.
4x+15-3x+10= help me please
Answers
Answer:
7x+5
Explanation:
4x+15-3x+10
-10 -10
--------------------
4x+5-3x
+3x. +3x
---------------------
7x+5
A sample of which element could have a volume of 1.5 cubic centimeters (cm3) and a mass of 7.5 grams (g)?
Answers
Answer:
5 g/cm³Explanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\ [/tex]
From the question we have
[tex]density = \frac{7.5}{1.5} \\ [/tex]
We have the final answer as
5 g/cm³Hope this helps you
Which describes how rubbing fur on a rubber rod makes the rod negatively charged. Select one: A. Electrons move from the fur to the rubber rod. B. Electrons move from the rubber rod to the fur. C. Protons move from the rubber rod to the fur.
Answers
Answer:
A
Explanation:
Rubbing fur on a rubber rod results in the rod becoming negatively charged as a result of the movement of electrons from the fur to the rubber rod.
The process is called triboelectric charging. When the two substances are rubbed together, their atoms come into close proximity with each other and their electron clouds interact with the fur losing electrons to the rubber due to the fact that the atoms of the rubber have higher affinities for electrons than the atoms of the fur. Hence, the fur becomes positively charged while the rubber becomes negatively charged.
What did the Curies demonstrate by studying pitchblende?
A- Uranium is not the only radioactive element.
B- All elements are potentially radioactive.
C-Radium can cause anemia, bone and tissue damage, and death.
D-Uranium salts emit something that can expose photographic film.
Answers
Answer:
A- Uranium is not only the radioactive element
HELP ME PLEASEEEEEEEEEEEEEEE
(I really dont know the subject i just know science)
Answers
Answer:
B
Explanation:
weight , w= mg where m is the mass of the object (unit is kg ) and g is the gravitational force acting on the object ( unit is m/s^2 )
hope it helps
Which process creates new cells from existing cells?
A. Cell division
B.Cell limitation
C.Cell addition
D.No answer text provided.
Answers
Answer:
the answer is cell division
Explanation:
cell division is the process by which a present cell divides into two or more daughter cells.
the process can also be called cell cycle
The #2 discovery was:
a
heliocentrism
0
E=MCP
c
heredity
general relativity
d
Answers
Answer:
bug vfyjovcduvcu Harris's
what is an electrical force? just like the definition of an electrical force
Answers
Answer:
The attractive or repulsive interaction between any two charged objects is an electric force
Explanation:
that's the definition
Which metallic crystal structure has a coordination number of 8
Answers
Answer:
body-centered cubic
Explanation:
:D
Explain why both a power source (like a battery) and a complete circuit are necessary for an electromagnet to function.
this is science homework by the way, please help me with it:)
Answers
Answer:
Electromagnets are only functional when electricity is passing through them. In other words, they only create a magnetic field when there is an electric current flowing.
A power source like a battery is therefore necessary to supply the electric current necessary for the magnet to work however, it will not work unless the circuit is closed as electricity cannot not flow in an open circuit because current needs to be able to flow from one end of a power source to the other end.
Explanation:
ha hot dog hamburger hamburger ng baboy hahaha bomba girl home baboy
The formula for one molecule of sucrose is shown below.
C12H22011
How many atoms in all are in one molecule of sucrose?
Answers
Answer:
45
Explanation:
There are 12 Carbons
There are 22 Hydrogens
There are 11 Oxygens.
I think the answer is either 0 or 45. But the wording is very sloppy. It is not really atoms that are present. There are ions.
Go with 45 but hold your nose when writing your answer.
Which of the following is a component of natural gas? A)gasohol B)methane C)gasoline D)kerosene
Answers
Answer:
Methane
Explanation:
It is methane because, it comes from natural sources.
How many electrons are gained in the half-reaction 02, + electrons — 202-
Answers
Answer:
2
Explanation:
A
Answer: 4!!!
Explanation: j took the quiz!!!
what is hard water and what causes hardness of water
Answers
Answer:
hard water is ice
Explanation:
ice is formed as the water temperature decreases and then it freezes
Which statement describes how chemical formulas, such as H2O, represent compounds?
They show the types of molecules that make up an atom.
They show the elements that make up a compound.
They show the three-dimensional shape of a molecule.
They show the types of bonds that exist between elements.
Answers
Answer: B. They show the elements that make up a compound
Explanation:
Answer:
B
Explanation:
PLEASE HELPPP :[
When a chemical change occurs a new substance is created. Harvey put hamburgers on his barbecue, and they cooked. He left fruit out on the counter and they started to rot.
What evidence about chemical changes can Harvey use to support the examples in his experiment?
A.The chemical changes occurred because the chemicals changed.
B. The chemical changes occurred because there was a change in light energy.
C. The fruit and the hamburgers were affected by an increase in heat energy.
D. The fruit and the hamburgers were affected by a decrease in heat energy.
Answers
Answer:
C. The fruit and the hamburgers were affected by an increase in heat energy.
Explanation:
One claim Harvey can use to support the examples from his experiment is that the hamburgers and fruits were affected by an increase in the heat energy.
This chemical change is one that is solely driven. This action Harvey is carrying out is cookingWhen meals are cooked, the raw substances undergoes chemical change via the action of heat.Answer:
btw it's not c
Explanation:
a fruit rotting or infected is a chemical reaction therefore,its close to d
How much energy would be required to heat 10.0 g of water at 0 degrees C to 100 degrees C,and change it into steam at 100 degrees C
Answers
Answer:
Q = 4180 J
Explanation:
Given data:
Mass of water = 10.0 g
Initial temperature = 0°C
Final temperature = 100°C
Heat required = ?
Solution:
Specific heat capacity of water is 4.18 j/g.°C.
Formula:
Q = m.c. ΔT
Q = amount of heat absorbed or released
m = mass of given substance
c = specific heat capacity of substance
ΔT = change in temperature
ΔT = 100°C - 0°C
ΔT = 100°C
Q = 10.0 g ×4.18 j/g.°C × 100°C
Q = 4180 J
when an atom loses electrons, what does it become?
Answers
The object will have a minimum gravitational potential energy at point
A)A B)B C)C D)D
Answers
Answer: Decrease
Explanation: The downward slope causes the momentum to decrease in speed rather than increase from an higher point.
Will mark brainliest for who is right
Which properties change the composition of a substance?
chemical and physical properties
neither chemical nor physical properties
physical properties
chemical properties
Answers
what would happen if the
attractive forces between all of the particles
of matter on Earth were equal?
Answers
The magnitude of attractive forces between particles that compose matter determine the state of matter. Hence, if all particles of matter on earth have equal attractive forces, only a single state of matter (solid, liquid or gas) will exist on earth.
Matter exists in three states;
SolidLiquidGasIn solids, there exists the greatest magnitude of attractive forces between particles.
There are weaker inter-molecular attractive forces between liquid particles. However, inter molecular attractive forces are almost non-existent in gases.
The reason for the existence of different states of matter on earth is difference in magnitude of inter molecular attractive forces in each state of matter.
If all particles of matter possess equal attractive forces, only one state of matter will be found on earth; either solid, liquid or gas.
Learn more; https://brainly.com/question/9007693
How many moles of cesium carbonate will be produced when 5.34 moles of cesium reacts with iron (III) carbonate? (You must write and balance the formula equation!)
Answers
Answer:
2.67 moles of cesium carbonate (Cs2CO3).
Explanation:
We'll begin by writing the equation for the reaction. This is illustrated below:
Cs + Fe2(CO3)3 —> Cs2CO3 + Fe
The above equation can be balance as follow:
There are 2 atoms of Fe on the left side and 1 atom on the right side. It can be balance by putting 2 in front of Fe as shown below:
Cs + Fe2(CO3)3 —> Cs2CO3 + 2Fe
There are 3 atoms of C on the left side and 1 atom on the right side. It can be balance by 3 in front of Cs2CO3 as shown below:
Cs + Fe2(CO3)3 —> 3Cs2CO3 + 2Fe
There are 6 atoms of Cs on the right side and 1 atom on the left. It can be balance by putting 6 in front of Cs as shown below:
6Cs + Fe2(CO3)3 —> 3Cs2CO3 + 2Fe
Thus, the equation is balanced.
From the balanced equation above,
6 moles of Cs reacted with 1 mole of Fe2(CO3)3 to produce 3 moles of Cs2CO3.
Finally, we shall determine the moles of cesium carbonate (Cs2CO3) produced by the reaction of 5.34 moles of cesium (Cs). This can be obtained as follow:
From the balanced equation above,
6 moles of Cs reacted to produce 3 moles of Cs2CO3.
Therefore,
5.34 moles of Cs will react to produce = (5.34 × 3)/6 = 2.67 moles of Cs2CO3.
Thus, 2.67 moles of cesium carbonate (Cs2CO3) were produced from the reaction.
What does an oxygen atom do when becoming an ion?
Answers
In the article, Invasion of the Periodical Cicadas, why do scienctists believe that cicadas only reproduce every 13 or 17 years? Explain your answer with evidence from the text.
Answers
Hi, you've asked an incomplete question. However, I assumed you are referring to the article found on the Scientific American website.
Explanation:
Remember, according to that article we are told that scientists notice that these insects have a long nymphal (immature form before becoming adults) stage, one that can last up to 13 to 17 years on the ground before they leave the ground looking for mating partners.
Because it is only after mating occurs at this point that their eggs are laid, that is why scientists believe that cicadas only reproduce every 13 or 17 years.