Answer:
5.56 × 10^23 molecules
Explanation:
The number of molecules in a molecule can be calculated by multiplying the number of moles in that molecule by Avagadro's number (6.02 × 10^23)
Using mole = mass/molar mass
Molar mass of N2O4 = 14(2) + 16(4)
= 28 + 64
= 92g/mol
mole = 85.0/92
= 0.9239
= 0.924mol
number of molecules of N2O4 (nA) = 0.924 × 6.02 × 10^23
= 5.56 × 10^23 molecules
What do the horizontal portions of the graph represent? When heat is added to or removed from the substance and the temperature remains the same, where is the thermal energy going? Why?
You push a wagon that has a mass of 24 kg. If the net force on the wagon is 5 N south, what is the wagon's acceleration?
This figure illustrates which of the following? gamma emission
fusion
chain reaction
beta emission
Answer:chain reaction
Explanation:
How do i make observations and calculate data involving metric units?
Answer:
How to make scientific observations?
Observe something through your senses or record information using scientific tools and instruments and ask questions about your scientific observations (e.g., natural phenomena).
How to calculate data involving metric units?
To convert from one unit to another within the metric system usually means moving a decimal point (e.g., 1000000mm = 100000cm = 10000dm = 1000m = 100dkm = 10hm = 1km).
Calculate the molarity of each aqueous solution with the given amount of Nacl58.44 and final volume. A .3.30 in 0.340L,6.00mol in 550ml,0.0160mol in 9.00ml
Answer:
For A: The molarity is the solution 9.706 M
For B: The molarity of the solution is 10.91 M.
For C: The molarity of the solution is 1.78 M.
Explanation:
Molarity is defined as the amount of solute expressed in the number of moles present per liter of solution. The units of molarity are mol/L.
The formula used to calculate molarity:
[tex]\text{Molarity of solution}=\frac{\text{Number of moles of solute}}{\text{Volume of solution (L)}}[/tex] ......(1)
For A:
Number of moles = 3.30 moles
Volume of solution = 0.340 L
Plugging values in equation 1:
[tex]\text{Molarity of solution}=\frac{3.30 mol}{0.340 L}=9.706 mol/L[/tex]
For B:
Number of moles = 6.00 moles
Volume of solution = 550 mL = 0.550 L (Conversion factor: 1 L = 1000 mL)
Plugging values in equation 1:
[tex]\text{Molarity of solution}=\frac{6.00 mol}{0.550 L}=10.91 mol/L[/tex]
For C:
Number of moles = 0.0160 moles
Volume of solution = 9.00 mL = 0.009 L
Plugging values in equation 1:
[tex]\text{Molarity of solution}=\frac{0.0160 mol}{0.009 L}=1.78 mol/L[/tex]
What would it mean if a forecaster claimed, “There will be east winds of 25 to 30 mph
Answer:
there will be winds moving from 25miles per hour to 30 miles per hour towards the east
Fossil Fuels are an ________ resource that people are hoping to replace with ______ resources.
Answer:
fossil fuels are an nonrenewable resource that people are hoping to replace with renewable resources
Explanation:
Which of the following statements is not true? a. Water is polar. b. Water stabilizes temperature. c. Water is essential for life. d. Water is the most abundant atom in Earth’s atmosphere.
Answer: d. Water is the most abundant atom in Earth’s atmosphere.
Explanation:
Water percentage in the atmosphere is 0.001 percent only as it not the major reservoir or source of water. The water is available in the atmosphere in the form of water vapors. These water vapors when aggregate and their concentration becomes high they fall down as rain on earth so the rain is collected in water reservoirs like oceans, rivers, lakes, ponds, aquifers, and other sources of water, which are the components of hydrosphere on earth. So, hydrosphere is most abundant in water. Moreover, water is not an atom instead it is the molecule formed by the combination of two molecules of hydrogen and one molecule of oxygen.
If you initially have a gas with a pressure of 0.950 atm and a temperature of 35 °C and you heat it to 65 °C, what is the new pressure if volume and moles are held constant? (P2 = 1.04 atm)
Explanation:
fgIf the piston moves so as to increase the pressure of the gas to 2.94 atm, ... new volume of the cylinder? ... A gas has a pressure of 699.0 mm Hg at 40.0°C. What is the temperature (in C) ...
How can your body be at risk for diseases?
Answer:
I'm not sure if this is true but in science class I learned that stress can cause a risk of diseases
Explanation:
the more months of stress you have, the higher the risk
Will mark brainliest!!
Answer:
I think its B im not sure
but i hope this helps
On a certain hot day the atmospheric pressure was 1 atm and the temperature was 37°C. On this day 1 L sample of atmospheric gases was collected and analyzed. It was found to contain among other gases 9.38 x 10-3 mol of O2 gas, 2.46 x 10-8 mol of H2 gas and 1.79 x 10-4 mol of water vapor. If you put these amounts of the three gases in a sealed 1L tank at 1 atm and 37°C, will the combustion of hydrogen gas be spontaneous at these conditions?
Answer:
Yes, the combustion of hydrogen is spontaneous from the given conditions.
Explanation:
Let look at the reaction:
[tex]2H_2_{(g)} + O_2_{(g)} \to 2H_2O_{(g)}[/tex]
[tex]K_p = \dfrac{[P(H_2O)]^2}{[P(H_2)^2\times P(O_2)]} ----- (1)[/tex]
The total pressure of the tank = 1 atm
[tex]\mathtt{Pressure \ of \ the \ gas = moles \ fraction \of \ gas \times total \ pressure}[/tex]
Thus, pressure of [tex]O_2[/tex] gas = [tex]\dfrac{9.38 \times 10^{-3} }{(9.38 \times 10^{-3} + 2.46 \times 10^{-8} + 1.79 \times 10^{-4}} \times 1 atm[/tex]
[tex]P(O_2) = 0.9813 atm[/tex]
Pressure of [tex]H_2O[/tex] gas =[tex]\dfrac{1.78 \times 10^{-4}}{9.38 \times 10^{-3} + 2.46 \times 1)^{-8} + 1.78 \times 10^{-4}} \times 1 \ atm[/tex]
Pressure of H_2 gas = [tex]2.573 \times 10^{-6} \ atm[/tex]
From equation (1);
[tex]K_p = \dfrac{(0.0187)^2}{(2.573 \times 10^{-6})^2 \times (0.913) } \\ \\ K_p = 5.383 \times 10^7[/tex]
So, applying the equation:
[tex]\Delta G^0 = -RT In K_p \\ \\ = -8.314 \times (300)K \times IN(5.383 \times 10^7) \\ \\ = -45880.109 J \\ \\ = -45.800 \ kJ\\ \\[/tex]
Thus;
[tex]\Delta G^0 < 0[/tex]
Thus, Yes the combustion of hydrogen is spontaneous from the above conditions. From thermodynamics, we realize that assuming ∆G is negative, the reaction is spontaneous. Again we understand that ∆G=∆H-T∆S. However, for combustion, water will definitely be formed.
Finally, we can conclude that;
∆H is negative;
∆S is positive; &
∆G is also negative.
Thus, from above, we conclude combustion of hydrogen is spontaneous.
The combustion of hydrogen gas with the oxygen gas for the formation of the water vapor is a spontaneous reaction.
How do we know reaction is spontaneous?To know about the condition that the given reaction is spontaneous or not we will use the below equation and must get the negative value:
ΔG° = -RTlnKp, where
R = universal gas constant
T = temperature
Kp = partial pressure constant
Firstly we have to calculate the value of Kp.
Given chemical reaction is:
2H₂(g) + O₂(g) → 2H₂O(g)
Value of Kp for the given reaction is:
Kp = [p(H₂O)]² / [p(H₂)]².[p(O₂)]
Partial pressure will be calculated as:
p = mole fraction × total pressure
Given that total pressure of gas = 1atm
p(H₂O) = (1.79×10⁻⁴ / 1.79×10⁻⁴+2.46×10⁻⁸+9.38×10⁻³) × 1 = 0.0187
p(H₂) = (2.46×10⁻⁸ / 1.79×10⁻⁴+2.46×10⁻⁸+9.38×10⁻³) × 1 = 2.573 × 10⁻⁶
p(O₂) = (9.38×10⁻³ / 1.79×10⁻⁴+2.46×10⁻⁸+9.38×10⁻³) × 1 = 0.913
Putting all these values on the equation of Kp, we get
Kp = (0.0187)² / (2.573 × 10⁻⁶)²(0.913) = 5.383 × 10⁷
Now putting values in the first equation we get,
ΔG° = -(8.314)(300)ln(5.383 × 10⁷)
ΔG° = -45,800 kJ
Hence, given reaction is spontaneous.
To know more about spontaneous reaction, visit the below link:
https://brainly.com/question/24376583
A bow and arrow that was just pulled back but not yet released has
energy.
А
potential
B
electrical
С
geothermal
nuclear
Answer:
A potential
Explanation:
potential energy is a kind of energy which rest or stays in one position
The objects rest on a position has a potential energy. The bow and arrow that was just pulled back but not yet released has energy has potential energy.
What is potential energy ?The potential energy of an object is generated by virtue of its position at height above the surface. It is the stored form of energy when the object is at rest. Whereas, kinetic energy of an object is generated by virtue of its motion.
When the object starts to move with a speed, its potential energy starts to convert into kinetic energy. Both are dependent on the mass of the object. And these energies are directly proportional to the mass.
Here, the bow and arrow are not moving with a speed they just pulled and stay on a position, so they don't have a net kinetic energy but they possess a potential energy. Hence, option A is correct.
Find more on potential energy:
https://brainly.com/question/12807194
#SPJ2
To remove a tight-fitting lid from a jar, Megan runs the lid under hot water.
What happens to the Jar lid when its temperature increases?
A.The temperature increases, and the lid expands
B.The temperature decreases, and the lid contracts.
C.The potential energy increases, and the lid contracts.
D.The potential energy decreases, and the lid expands
Answer:
A
Explanation:
Which of the following equilibria could be used to support the claim that the addition of a small amount of NaOH to the buffer will result in only a very small change in pH? (see image)
I think First statement that is Option A, because, it has total equilibrium on both side, which will never result in increase of any pH level higher or lower than the state, hence
Option A.) is correct
1. Find the molarity of 2.39 g Lif in 450 mL of water
Answer:
0.205M
Explanation:
Molarity is an unit of concentration used in chemistry defined as the ratio between moles of solute (In this case, LiF) and liters of solution.
To solve this question, we must find the moles of LiF and the liters of the solution:
Moles LiF -Molar mass: 25.939g/mol-:
2.39g * (1mol / 25.939g) = 0.0921moles
Liters solution:
450mL * (1L / 1000mL) = 0.450L
Molarity is:
0.0921 moles / 0.450L =
0.205Msomeone help me answer this !
can we observe a lunar eclipse during a new moon phase? explain your answer.
please help me thx
subject is science
Answer: There is no eclipse. However, two or four times a year, the Moon travels through some portion of the Earth's penumbral or umbral shadows, resulting in one of the three types of eclipses mentioned above. When the Moon crosses between the Earth and the Sun, this occurs. This is only possible when the Moon is in its New Moon phase.
Explanation:
HOPE THIS HELPS!!! : )
Which of the following is true about the coefficients in a balanced chemical equation?
Answer:
Where is the chemical equations?
A balanced equation obeys the law of conservation of mass. The coefficient represent the number of molecules in a chemical equation.
What is a balanced chemical equation?An equation in which the number of reactants and products on the both sides of the reaction are equal can be defined as the balanced chemical equation. The coefficient are the numbers in front of the formula.
The coefficients are the numbers that must be added in front of the species involved in the reaction in order to balance it. It tells how many number of atoms or molecules are present in a reaction.
In the reaction N₂ + 3H₂ → 2NH₃ which is called Haber's process.
The coefficients are:
1 for Nitrogen molecule, 3 for Hydrogen molecule and 2 for the compound Ammonia.
Thus coefficients are numbers in front of each formula.
To know more about balanced chemical equation, visit;
https://brainly.com/question/15052184
#SPJ6
You weigh out 0.1183 g of a complex salt to analyze for the percentage of cyanide ion in your complex salt. After dissolving the complex salt in solution, you determine that it takes 10.02 mL of a 0.08035 M potassium permanganate solution to react with all of the cyanide ion in your complex salt. Using the balanced chemical equation provided, determine the mass percentage of the cyanide ion in your complex salt. (Remember: the mole ratio of MnO4 - to KMnO4 is 1:1)
Answer:
25.35%
Explanation:
Again let me restate the the equation of the reaction;
H2O (ℓ) + 2 MnO4 - (aq) + 3 CN- (aq) → 2 MnO2 (s) + 3 CNO- (aq) + 2 OH- (aq)
Amount of potassium permanganate reacted = 10.2/1000 * 0.08035 = 8.1957 * 10^-4 moles
If 2 moles of MnO4 - reacts with 3 moles of CN-
8.1957 * 10^-4 moles of MnO4 - reacts with 8.1957 * 10^-4 * 3/2
= 1.229 * 10^-3 moles of CN-
Mass of CN- reacted = 1.229 * 10^-3 moles of CN- * 26.02 g/mol
= 0.03 g
Hence, percentage of the cyanide = 0.03 g/0.1183 g * 100
= 25.35%
Why isn’t there a lunar eclipse every time Earth is in between the sun and the Moon?
Answer: Exploratorium Senior Scientist Paul Doherty explains why not—the orbit of the moon is tilted relative to the orbit of the Earth around the sun, so the moon often passes below or above Earth. At those times, it does not cross the line between the sun and the Earth, and therefore does not create a solar eclipse.
HOPE THIS HELPS
Which lists the structures, in correct order, through which light passes when it enters the eye?
cones, pupil, lens, sclera
sclera, iris, pupil, lens
vitreous humor, lens, pupil, cornea
cornea, pupil, lens, vitreous humor
hurry plz
Answer:
cornea, pupil, lens, vitreous humor
Answer:
cornea, pupil, lens, vitreous humor
Explanation:
One of your bike tires has a volume of 18.2 L at temperature of 22.0°C. The temperature rises to 45.0°C when a sudden heat wave hits the DFW area. Calculate the new volume of your tire.
(3 sig figs)
Answer:
New volume = 19.61 L
Explanation:
Given that,
Initial volume, V₁ = 18.2 L
Initial temperature, T₁ = 22°C = 295 K
Final temperature, T₂ = 45°C = 318 K
We neeed to find the new volume of the tire. The relation between volume and temperature is given by :
[tex]V\propto T\\\\\dfrac{V_1}{V_2}=\dfrac{T_1}{T_2}\\\\V_2=\dfrac{V_1T_2}{T_1}\\\\V_2=\dfrac{18.2\times 318}{295}\\\\V_2=19.61\ L[/tex]
So, the new volume of the tire is equal to 19.61 L.
Answer:
19.61
Explanation:
It is easy, the mole is multiples by k and soforth
Can anyone tell me what the answer is?
Answer: c) A. 5.606x10²³atoms is the correct answer.
Explanation:
Why might changes to an environment cause an organism’s population to decrease?
Atomic Size: Determine which of the following element pairs is the larger one
1. Carbon or Fluorine
2. Iodine or Fluorine
3. Krypton or Argon
4. Hydrogen or Potassium
Answer: I think the answer is 3.) Krypton or Argon.
Explanation:
WHAT IT IZ BRAINLY anyways I got a question for y’all do you think someone can forget who they rlly loved ? Can you ever forget who you really loved ? I’m tryna prove sum
Answer:
Its a 50% chance of it happeing
Explanation:
Raul needs to ensure that when users enter an order into the tblOrders, the shipping date is at least two days after the order date on the data entry. Which option should he use?
Answer:
Input Mask
Explanation:
In this scenario, the best tool for Raul to use would be an Input Mask. When dealing with Microsoft Access or any other database tool, Input Masks are a great way of validating data inputs so that they always match the desired format. In this case, Raul would need to use input mask and apply the desired format while comparing it to the order date, therefore, making sure that it is always a minimum of 2 days after before it is accepted as a valid entry in the database.
Pls someone help me hurry pls someone?????
Answer:
Becxause there is no whee5r else for the flame to go out fromk
Explanation:
NaCl
Na = 1
Cl=1
Answer:
19. because fire needs oxygen or air to keep the fire burning.
20.A molecule of sodium chloride, NaCl, consists of one atom each of sodium and chlorine. Hence, each molecule of NaCl has 2 atoms total. Similarly, we can calculate the total number of atoms in 1 mole of sodium chloride. Since 1 molecule contains 1 atom each of Na and Cl, 1 mole of NaCl will contain 1 mole each of Na and Cl.
Explanation:
Hope this helps!
In a food chain, energy does NOT flow directly from - F producer to decomposer G producer to consumer H consumer to decomposer J consumer to producer
Answer:
producer to decomposer
Explanation:
This is because in a food chain , energy flow from one trophic level to another. The producer which include plants are the source of energy which they manufacture good in the presence of light energy from sun. Energy flow directly from the producer to the primary consumer which are heterotrophs that feed on plants. Energy flow from consumer to decomposer after the consumer died and it is decayed.