If we decrease the amount of force, and keep all other factors the same, what will happen to the amount of work? The amount of work will go down because the distance will decrease. The amount of work will go up because the distance will decrease. The amount of work will go down because the distance will increase. The amount of work will go up because the distance will increase.

Answer: B

Degree

Explanation:

The direction of vectors are always measured in angles starting from the north. That is, in an anticlockwise direction. But the unit of angle is degree. Therefore, the direction of a vector that points somewhere between due north and due east is measured in degree.

Answer:degrees

Explanation:

Answer: I think 1 is 300 metres per second.

Explanation: wave speed= wave length x wave frequency

wave speed = 3 x 100

wave speed is 300 m/s

Answer:

decrease their prices

Explanation:

If we see demand curve then we can observe that demand for good decreases when price increases and demand for good increases when price decreases.

We also know intuitively that customer are price sensitive. That is their buying behavior changes with price of goods, Consumers prefer lower priced good.

So, if business owners want to increase demand for their goods and services

they should decrease their prices.

Answer:

Explanation:

Speed is defined as the change in distance covered by a body with respect to time while velocity the change in displacement of a body with respect to time. Speed is a scalar quantity since it does not specifies direction while velocity is a vector quantity because it specifies both magnitude and direction.

Speed can only be equal to the velocity if it also specifies direction.

Based on the definition above, it can be concluded that speed is the change in distance over time and velocity is speed plus direction.

Answer:

Speed is the change in distance over time; velocity is speed plus direction.

Explanation:

I did it and got the test right

Answer:

The acceleration is found as:

a = 1000 km/h²

Explanation:

Initial speed of the plane = 450 km/h

Final speed of the plane = 750 km/h

Time taken = 0.3 h

Acceleration can be defined as the change of speed of the object divided by the time taken to bring that change

Acceleration is given as:

[tex]a=\frac{v_f-v_i}{t}[/tex]

where v(f) = 750 km/h , v(i) = 450 km/h , t = 0.3 h

Substitute the values in the equation of acceleration

[tex]a= \frac{750-450}{0.3}\\a=\frac{300}{0.3}\\a=1000 km/h^2[/tex]

This is the found result

Answer:

Frequency and wavelength are inversely related.

Explanation:

Frequency and wavelength have an inverse relationship because if one thing goes up another goes down. For example, if frequency goes up, the wavelength goes down and vice versa.

Answer:

The relationship between wavelength and frequency is that the frequency of a wave multiplied by its wavelength gives the speed of the wave.

Explanation:

Frequency and wavelength are related terms also, used to describe electromagnetic radiation or light. One simple equation is used to convert between them: frequency x wavelength = speed of light. λ v = c, when λ is wavelength, v is frequency, and c is the speed of light.

I know I'm really late but I hope this helps lol

Answer:

Ingrid is correct. The clay appears red because it is a type of matter.

Explanation:

Explanation: It is A because it only shows red because it only reflects red. If it let any other color pass through it then it could reflect any color.

Answer:

A. open parallel circuit im pretty sure

Explanation:

Answer:

D

Explanation:

The bulbs are on the same wire as the battery, so its series. Current is flowing so its closed.

Answer: find the answer in the explanation

Explanation: The potential energy in a circuit between two points is the workdone in taking units positive charge from one point to the other in the circuit. Its S.I unit is Joule.

Because voltage of a battery or cell in a circuit is the potential energy difference across its terminal

The potential energy difference between two points is one volt, if the workdone in taking one Coulomb of positive charge from one point to the other is one Joule.

Answer: sound intensity will decrease to the one - fourth of its initial value.

Explanation:

The relationship between sound intensity and the distance obeys inverse square law, where the intensity of sound is inversely proportional to the square of the distance. That is,

I = 1/ r^2

Where

I = sound intensity

r = distance.

If the distance from the source is doubled, sound intensity will decrease in value to the one - fourth of its initial value.

Answer:

An electrical current is an electrical charge flowing around a circuit. Carried by billions of tiny particles called electrons, the charge is already in the wires.

Explanation:

There are three basic conditions for the electric current flow is to be given below:-

Answer:

I didn't quite understand your question, but the moon jelly population will increase if there are either more zooplankton or less sea turtles.

More zooplankton means more food => higher population

Less sea turtles means that the moon jelly will be lest often consumed => higher population

Answer: Yes because the Orca will start to eat the moon jellies

Explanation: When the Sea Turtles start to get very low on population the Moon jellies are next in line also the sea turtles eat the moon jellies and since they eat the moon jellies the sea turtle has a bit of that taste in them so they will taste alike to the sea turtles.

Answer:

Let the second medium be air (n₁=1)

The refractive index n₂ of the medium where first medium is air is found (a)

(a) n₂ = 2

Explanation:

Critical angle can be defined as the angle of incidence that provides the angle of refraction of 90°.

Refractive index of a medium can be defined as a number that describes that how fast a light will travel through that medium.

Critical angle and Refractive index are related by:

[tex]\theta_{critical}= sin^{-1}(\frac{n_1}{n_2})[/tex]

[tex]sin \theta_{critical}=\frac{n_1}{n_2}[/tex]

To find refractive index of medium with respect to air, substitute n₁=1 (Refractive index of air is 1)

Also θ(critical)=30°

Find n₂ :

[tex]sin30= \frac{1}{n_2}\\0.5=\frac{1}{n_2}\\n_2=\frac{1}{0.5}\\n_2=2[/tex]

Effective resistance = 2+1.5 = 3.5 ohms

Current in the circuit = 1.2 A

Lost volts in the battery = 1.8V

Current in one of the 3 ohms resistors = 0.6 A

I hope it helps

Answer:

The correct answer will be "1/16".

Explanation:

The force or distance between two substances in charge seems to be inversely proportional to the square of the size of the particles.  

The exerted force between "S" and "q" will be:

⇒  [tex]Fsq=\frac{{Q}'}{Q} 1^2[/tex] ...(equation 1)

The exerted force between "S" and "p" will be:

⇒  [tex]Fsp=\frac{{Q}'}{Q} 4^2[/tex] ...(equation 2)

Now,

On the comparison of "equation 1" and "equation 2", we get

⇒  [tex]\frac{1}{16}[/tex]

Answer:

A. B

Explanation:

The image has been attached.

Reflected ray refers to the ray of light which is reflected back after striking a surface that is non-permeable.

The ray of light which is reflected before the ray touches the surface is said to the incident ray.

According to the given image, ray B is the reflected ray. Ray B is reflected in the air after the ray A strikes at the surface of the water.

B

Explanation:

Since mirrors reflect things, when you shine light at a mirror, it will bounce off of the mirror, or reflect, and shine the opposite direction of where the original light is pointed. The answer would be B because light doesn't go through the mirror, or run along it.

Think of when you through a basketball on the ground. If you bounce it at an angle, it won't just come back to you in the same angle. It will keep bouncing at the same angle you through it. This is pretty much what describes the relationship between ray A and ray B.

HOPE THIS HELPS!!!!!

Answer:

Our ears perceive then sound then it is transmitted to our brain where it is processed into something we can respond to. This all happens in less than a second and we are unaware that we are doing it.  

Explanation:

The sound wave bounces off of the ear drum into the inner ear.

Answer:

Sound waves travel from the outer ear and in through the auditory canal, causing the eardrum to vibrate. This in turn causes three small bones in the middle ear to move. The vibrations move through the fluid in the cochlea in the inner ear, stimulating thousands of tiny hair cells.

Answer:

open series circuit, (c)

Explanation:

Answer:

all of the above

Explanation:

i study this kind of stuff in school

Answer:

19.1°C

Explanation:

If A and B mix to give 16°C, A has risen by 4°C and B has fallen by 3°C;

If B and C mix to give 23°C, B has risen by 3°C and C has fallen by 5°C;

This means the energy transfered to cause a change of 3°C in B causes a change of 4°C in A and 5°C in C;

We can use this as a ratio (4:5);

The temperature difference between A and C is 16°C;

we add the two parts of the ratio (4+5) to get 9 and divide the temperature difference to get 16/9;

Next we multiply this by one of the parts of the ratio, so with 4, you get 64/9;

This number is the proportional temperature change in A upon mixing;

We then add this to the original temperature of A to get the resultant temperature of the mix like so:

64/9 + 12 = 19.1111...

You can do this alternatively using the other part of the ratio;

We would multiply the 16/9 by the 5 instead of the 4 to get 80/9;

This number is the proportional change in temperature in C upon mixing

Then subtract this from this from the original temperature of C and you should get the same answer:

28 - 80/9 = 19.1111...

Answer:

When the electric force between two charged objects change, the distance between the objects increases in Iicreasing the separation distance between objects and decreases the force of attraction or repulsion between objects.

Hope it helps.

Answer: Liquefaction occurs when the structure of a loose, saturated sand breaks down due to some rapidly applied loading.

As the structure breaks down, the loosely-packed individual soil particles attempt to move into a denser configuration. Liquefaction most often occurs when three conditions are met:

loose, granular sediment or fill

saturation by groundwater

strong shaking

Answer:

heat is applied

Explanation:with metal and ice

Answer:

Metric Math Mistake Muffed Mars Meteorology Mission. 1999: A disaster investigation board reports that NASA's Mars Climate Orbiter burned up in the Martian atmosphere because engineers failed to convert units from English to metric

Explanation:

hope this helps =)

Answer:

d. at the same velocity

Explanation:

I will assume the car is also travelling westward because it was stated that the helicopter was moving above the car. In that case, it depends where the observer is. If the observer is in the car, the helicopter would look like it is standing still ( because both objects have the same velocity). If the observer is on the side of the road, both objects would be travelling at the same velocity. Also recall that, velocity is a vector quantity; it is direction-aware. Velocity is the rate at which the position changes but speed is the rate at which object covers distance and it is not direction wise. Hence velocity is the best option.

Answer:

C. At the same speed

Explanation:

I just took the exam and got the answer correct

Answer: B

White paper reflects some of the incoming waves,

while black absorbs all of the incoming waves.

Explanation:

Light is reflected off of white surfaces. Light is absorbed by opaque materials and transmitted through transparent objects. 

In the case of a white paper, a white paper can be considered as a translucent material in which some of the light incident on it bounces off while some pass through it. Therefore, we can conclude that White paper reflects some of the incoming waves,

while black absorbs all of the incoming waves.

Answer:

a) transferring energy

Explanation:

A linkage is an assembly of parts connected together to control forces and movement. The connections between links are called joints and are used for ensuring movement, pure rotation or sliding.

Linkages provides a means in which kinetic energy is being transferred in different directions within a system. This Linkages can be used to Change force  direction, size of force applied or the motion created by the force.

Answer: C

the emission of electrons from a metal caused by light striking the metal

Explanation:

Photo means anything related to light in Physics and science generally.

Photoelectric effect explains the effect of light incident on metal surfaces by knocking out electrons on the metal surfaces.

The correct option is C

the emission of electrons from a metal caused by light striking the metal

Answer:

7 m^2

Explanation:

P=F/A

1=7/A

1A=7

A=7

Area is 7 meters squared