My son and I are stuck on this one. Can anyone give some insight to this problem? Thank you.

Hey there!

Answer:

A = 192 in²

Step-by-step explanation:

Base = 4 ft

Height = 4 in

Convert the length of the base to inches:

4 ft = 4 ×12 = 48 in

Formula for the area of a rectangle: A = l × w (in this instance, 'l' is the height)

4 × 48 = 192 in²

Answer:

A =192 in^2

Step-by-step explanation:

Change the 4 ft to inches

4 * 12 = 48 inches

A = l*w

A = 48*4

A =192 in^2

Answer:

11 1/4

Step-by-step explanation:

first make the fractions equal. So 9 1/6 would be 9 2/12 so that we canadd them together.

9 2/12 + 2 1/12 = 11 3/12

but u can simplify the answer so itll be 11 1/4

[tex]answer = 11 \ \frac{3}{12} \\ solution \\ 9 \ \frac{1}{6} + 2 \ \frac{1}{12} \\ = \frac{55}{6} + \frac{25}{12} \\ = \frac{55 \times 2 + 25}{12} \\ = \frac{110 + 25}{12} \\ = \frac{135}{12} \\ = 11 \ \ \frac{3}{12} \\ hope \: it \: helps[/tex]

The smaller angle, inside the bold lines, is -90 degrees.

The larger angle, outside the bold lines, is 270 degrees.

Angles can be measured in increments between -90° and 630°.

Two straight lines are considered to be intersecting if they come together at the same point. The intersection of two lines is known as the junction point. When two lines intersect, four angles are produced. The sum of the four angles is always 360 degrees.

Two straight lines that cross one other and produce right angles are called perpendicular lines. There are four right angles created when two perpendicular lines cross.

There are two types of angle connections produced when lines intersect:

Congruent opposite angles

Nearby angles are helpful

The information is

Let O (0, 0) be the origin, where the y and x axes must connect.

Thus, the angles on the four quadrants of the axis are produced.

The fourth quadrant's crossing lines create an angle that is given by For, the anticlockwise measure, A = -90°.

B = 360n - 180° for the clockwise measure, and n = 3 in this case.

Hence, when we simplify, we obtain

The second angle has a length of = 630°.

As a result, the angles are 90° and 630°.

Go here to find out more about angles created by intersecting lines.

https://brainly.com/question/16315358

#SPJ6

Answer:

Step-by-step explanation:

Corresponding net sales before 1 month and after 1 month form matched pairs.

The data for the test are the differences between the net sales before and after 1 month.

μd = the​ net sales before 1 month minus the​ net sales after 1 month.

Before after diff

57.1 63.5 - 6.4

94.6 101.8 - 7.2

49.2 57.8 - 8.6

77.4 81.2 - 3.8

43.2 41.9 1.3

Sample mean, xd

= (- 6.4 - 7.2 - 8.6 - 3.8 + 1.3)/5 = - 4.94

xd = - 4.94

Standard deviation = √(summation(x - mean)²/n

n = 5

Summation(x - mean)² = (- 6.4 + 4.94)^2 + (- 7.2 + 4.94)^2 + (- 8.6 + 4.94)^2+ (- 3.8 + 4.94)^2 + (1.3 + 4.94)^2 = 60.872

Standard deviation = √(60.872/5

sd = 3.49

For the null hypothesis

H0: μd ≥ 0

For the alternative hypothesis

H1: μd < 0

The distribution is a students t. Therefore, degree of freedom, df = n - 1 = 5 - 1 = 4

2) The formula for determining the test statistic is

t = (xd - μd)/(sd/√n)

t = (- 4.94 - 0)/(3.49/√5)

t = - 3.17

We would determine the probability value by using the t test calculator.

p = 0.017

Since alpha, 0.05 > than the p value, 0.017, then we would reject the null hypothesis. Therefore, at 5% significance level, the data indicate that the average net sales improved.

Hope this helps!

Stay safe, have a good day :D

Answer:

a) The CDF of X/Y is calculated as:

[tex]F_{z} (\zeta) = \frac{\zeta}{\zeta + 2}[/tex] for [tex]0 < \zeta < \infty[/tex]  

[tex]F_{z} (\zeta) = 0[/tex] for [tex]\zeta \leq 0[/tex]

Note: Z = X/Y

b) Probability that A finishes before B = 1/3

Step-by-step explanation:

For clarity and easiness of expression, this solution is handwritten and attached as a file. Check the complete solution in the attached file.

Answer:

A. d= 45t

Step-by-step explanation:

(assuming that you meant 67.5 in the last 1.5 hours)

67.5 miles = distance

1.5 hours = time

therefore:

[tex]\frac{d}{t\\}[/tex] = 67.5/1.5

making your answer 45

leaving a as your correct answer:

d= 45t

The proportion relationship between the distance d, and the time t, that the train has travelled is, d = 45t. So the correct option is A).

Proportional relationships are relationships between two variables where their ratios are equivalent. Another way to think about them is that, in a proportional relationship, one variable is always a constant value times the other.

Given that, A train travels at a constant speed and has travelled 67.5 miles in the last 1.5 hours. (assuming that you meant 67.5 in the last 1.5 hours)

67.5 miles = distance

1.5 hours = time

We know that, speed = distance / time

s = 67.5/1.5

s = 45 mph

Now, distance = speed × time

d = 45t

Hence, the proportion relationship between the distance d, and the time t, that the train has travelled is, d = 45t. So the correct option is A).

For more references on proportion relationship, click;

https://brainly.com/question/29765554

#SPJ5

Answer:

67

Step-by-step explanation:

Using triangle property

127+x=180

x=53

53+60+y=180

113+y=108

y=67

Answer:

  3.84 units

Step-by-step explanation:

By the properties of angle bisectors, ...

  WZ/ZX = WY/YX

Solving for WY, we have ...

  WY = (YX)(WZ)/(ZX) = (6.5/6)(WZ)

The length YZ is ...

  YZ = 8 = WY +WZ

  8 = (6.5/6)(WZ) +WZ = 12.5/6(WZ) . . . . substitute for WY

  WZ = 8(6/12.5) . . . . multiply by 6/12.5

  WZ = 3.84

Answer:

The correct answer is indeed 3.84 units

Step-by-step explanation:

I just took the test and got it correct hope this helps ☺

Answer:

The data support the hypothesis that the proportion of defectives is lower for robots than humans.

Step-by-step explanation:

To know if the proportion of defectives is lower for robots than humans so as to prove if the hypothesis is true.

From the data given:

Total number of cables a robot assembled = 507

Defectives = 9

To get the defect rate =  the number of defects divided by the total number of cables, multiplied by 100.

Defect rate =  (9 / 507) x 100 = 0.01775 x 100

Defect rate for the robot = 1.775‬%

From the question, a robot was used and the defect rate after the calculation is 1.775‬%. While for humans, the defect rate is 3.5%. This implies, if humans were used to assembling the same 507 cables, there will be 17.745‬ defectives.

x / 507 = 3.5%

x (defectives) = 17.745‬

Therefore, the data support the hypothesis that the proportion of defectives is lower for robots than humans.

Answer:

Step-by-step explanation:

Hello!

Given the variables

Y: family spending

X₁: income of a family

X₂: family size

X₃: additions to savings of a family

And the regression output (see attachment)

The population model is Y= α + β₁X₁ + β₂X₂ + β₃X₃

a)

To write the estimated regression equation of the relationship between the variables you have to use the information given in the regression output. Under the column "coefficients", the value that corresponds to "intercept" is the estimation of the y-intercept (a), the value under X₁ corresponds to the estimation for the slop for the variable "income of the family" (b₁), under X₂ is the estimation of the slope for the variable "family size" (b₂) and under X₃ is the estimation for the slope corresponding to the variable "additions to savings" (b₃)

The estimated regression equation is:

^Y= a + b₁X₁ + b₂X₂ + b₃X₃

^Y= 0.0136 + 0.7992X₁ + 0.2280X₂ -0.5796X₃

b)

Using the SS information you can calculate the coefficient of determination as:

SStotal= SSReg+SSError= 45.9634+2.6218= 48.5852

[tex]R^2= \frac{SS_{Reg}}{SS_{Total}} = \frac{45.9634}{(48.5852)} = 0.946[/tex]

R²= 94.6%

This means that 94.6% of the variability of the average family spending is explained jointly by the family income, the family size and the addition to saving under the estimated model ^Y= 0.0136 + 0.7992X₁ + 0.2280X₂ -0.5796X₃

c)

The hypotheses are:

H₀: β₁= β₂= β₃= 0

H₁: At least one βi≠0 ∀ i=1, 2, 3

α: 0.05

The statistic for the multiple regression is

[tex]F=\frac{MS_{Reg}}{MS_{Error}} ~~F_{Df_{Reg};Df_{Error}}[/tex]

[tex]MS_{Reg}= \frac{SS_{reg}}{Df_{Reg}}= \frac{45.9634}{3} = 15.32[/tex]

[tex]MS_{Error}= \frac{SS_{Error}}{Df_{Error}} = \frac{2.6218}{11} = 0.238[/tex]

[tex]F_{H_0}= \frac{MS_{Reg}}{MS_{Error}}= \frac{15.32}{0.238}= 64.37[/tex]

p-value  < .00001

At a 5% significance level, there is enough evidence to reject the null hypothesis. This means that the family income, family size and the addition to savings modify jointly the average spending of families.

d.

Individual tests:

There are two possible statistics to test the significance of each independent variable: [tex]t= \frac{b_i-\beta_i }{S_{b_i}} ~~t_{n-3}[/tex] ∀ i= 1, 2, 3, or [tex]F=\frac{MS_{X_i}}{MS_{Error}} ~F_{Df_{X_i}; Df_{Error\\}}[/tex]

Since the output doesn't give us the information of the individual ANOVA, you have to use the t-test (Df: n-3= 12-3= 9) for these hypotheses. Using the p-value approach. the decision rule for the three hypothesis will be:

If p-value ≤ α ⇒ Reject null hypothesis.

If p-value > α ⇒ Do not reject the null hypothesis.

1)

H₀: β₁ = 0

H₁: β₁ ≠ 0

α: 0.05

[tex]t_{H_0}= \frac{b_1-\beta_1 }{Sb_1}= \frac{0.7992-0}{0.074}= 10.8[/tex]

p-value < .00001 ⇒ Decision is to reject the null hypothesis.

2)

H₀: β₂ = 0

H₁: β₂ ≠ 0

α: 0.05

[tex]t_{H_0}= \frac{b_2-\beta_2 }{Sb_2}= \frac{0.2280-0}{0.190}= 1.2[/tex]

p-value: 0.260773 ⇒ The decision is to not reject the null hypothesis.

3)

H₀: β₃ = 0

H₁: β₃ ≠ 0

α: 0.05

[tex]t_{H_0}= \frac{b_3-\beta_3 }{Sb_3}= \frac{-0.5796-0}{0.920}= -0.63[/tex]

p-value: 0.544355 ⇒ The decision is to not reject the null hypothesis.

So, at a 5% significance level, it seems that the three independent variables influence jointly the variation on the average spending of the families, but looking at them separately, only the income of the families seems to affect their spending habits significantly while the family size or their addition to savings don't seem to have major effect over their spending habits.

I hope this helps!

Answer:

B

The mode is 11 and 3

The Median is 10

The mean is 12

Answer:

[tex]y_g(t) = c_1*( 2t - 1 ) + c_2*e^(^-^2^t^) - e^(^-^2^t^)* [ t^3 + \frac{3}{4}t^2 + \frac{3}{4}t ][/tex]

Step-by-step explanation:

Solution:-

- Given is the 2nd order linear ODE as follows:

                      [tex]ty'' + ( 2t - 1 )*y' - 2y = 6t^2 . e^(^-^2^t^)[/tex]

- The complementary two independent solution to the homogeneous 2nd order linear ODE are given as follows:

                     [tex]y_1(t) = 2t - 1\\\\y_2 (t ) = e^-^2^t[/tex]

- The particular solution ( yp ) to the non-homogeneous 2nd order linear ODE is expressed as:

                    [tex]y_p(t) = u_1(t)*y_1(t) + u_2(t)*y_2(t)[/tex]

Where,

              [tex]u_1(t) , u_2(t)[/tex] are linearly independent functions of parameter ( t )

- To determine [  [tex]u_1(t) , u_2(t)[/tex] ], we will employ the use of wronskian ( W ).

- The functions [[tex]u_1(t) , u_2(t)[/tex] ] are defined as:

                       [tex]u_1(t) = - \int {\frac{F(t). y_2(t)}{W [ y_1(t) , y_2(t) ]} } \, dt \\\\u_2(t) = \int {\frac{F(t). y_1(t)}{W [ y_1(t) , y_2(t) ]} } \, dt \\[/tex]

Where,

      F(t): Non-homogeneous part of the ODE

      W [ y1(t) , y2(t) ]: the wronskian of independent complementary solutions

- To compute the wronskian W [ y1(t) , y2(t) ] we will follow the procedure to find the determinant of the matrix below:

                      [tex]W [ y_1 ( t ) , y_2(t) ] = | \left[\begin{array}{cc}y_1(t)&y_2(t)\\y'_1(t)&y'_2(t)\end{array}\right] |[/tex]

                      [tex]W [ (2t-1) , (e^-^2^t) ] = | \left[\begin{array}{cc}2t - 1&e^-^2^t\\2&-2e^-^2^t\end{array}\right] |\\\\W [ (2t-1) , (e^-^2^t) ]= [ (2t - 1 ) * (-2e^-^2^t) - ( e^-^2^t ) * (2 ) ]\\\\W [ (2t-1) , (e^-^2^t) ] = [ -4t*e^-^2^t ]\\[/tex]

- Now we will evaluate function. Using the relation given for u1(t) we have:

                     [tex]u_1 (t ) = - \int {\frac{6t^2*e^(^-^2^t^) . ( e^-^2^t)}{-4t*e^(^-^2^t^)} } \, dt\\\\u_1 (t ) = \frac{3}{2} \int [ t*e^(^-^2^t^) ] \, dt\\\\u_1 (t ) = \frac{3}{2}* [ ( -\frac{1}{2} t*e^(^-^2^t^) - \int {( -\frac{1}{2}*e^(^-^2^t^) )} \, dt] \\\\u_1 (t ) = -e^(^-^2^t^)* [ ( \frac{3}{4} t + \frac{3}{8} )] \\\\[/tex]

- Similarly for the function u2(t):

                     [tex]u_2 (t ) = \int {\frac{6t^2*e^(^-^2^t^) . ( 2t-1)}{-4t*e^(^-^2^t^)} } \, dt\\\\u_2 (t ) = -\frac{3}{2} \int [2t^2 -t ] \, dt\\\\u_2 (t ) = -\frac{3}{2}* [\frac{2}{3}t^3 - \frac{1}{2}t^2 ] \\\\u_2 (t ) = t^2 [\frac{3}{4} - t ][/tex]

- We can now express the particular solution ( yp ) in the form expressed initially:

                    [tex]y_p(t) = -e^(^-^2^t^)* [\frac{3}{2}t^2 + \frac{3}{4}t - \frac{3}{8} ] + e^(^-^2^t^)*[\frac{3}{4}t^2 - t^3 ]\\\\y_p(t) = -e^(^-^2^t^)* [t^3 + \frac{3}{4}t^2 + \frac{3}{4}t - \frac{3}{8} ] \\[/tex]

Where the term: 3/8 e^(-2t) is common to both complementary and particular solution; hence, dependent term is excluded from general solution.

- The general solution is the superposition of complementary and particular solution as follows:

                    [tex]y_g(t) = y_c(t) + y_p(t)\\\\y_g(t) = c_1*( 2t - 1 ) + c_2*e^(^-^2^t^) - e^(^-^2^t^)* [ t^3 + \frac{3}{4}t^2 + \frac{3}{4}t ][/tex]

Complete Question

The complete question is shown on the first uploaded image  

Answer:

The point of diminishing returns (x , y ) is  (11, 21462)

Step-by-step explanation:

From the question we are told that

     The function is  [tex]R(x) = 10,000 -x^3 - 33x^2 + 800x , \ \ 0 \le x \le 20[/tex]

Here R(x)  represents revenue (in thousands of​ dollars) and  x  represents the amount spent on advertising​ (in thousands of​ dollars).

           Now  differentiating  R(x) we have  

               [tex]R'(x) = -3x^2 +66x + 800[/tex]

Finding the second derivative of R(x)

              [tex]R''(x) = -6x +66[/tex]

at  inflection point    [tex]R''(x) = 0[/tex]

    So      [tex]-6x +66 = 0[/tex]

=>           [tex]x= 11[/tex]

    substituting value of x into R(x)

     [tex]R(x) = 10,000 -(11)^3 - 33(11)^2 + 800(11) ,[/tex]

      [tex]R(x) = 21462[/tex]

Now the point of diminishing returns (x , y ) i.e (x , R(x) ) is

     (11, 21462)

Answer is 5 calories/min

75 divided by 15 is 5

Answer:five cal per min.15 in five groups equals ''75''

Answer: Choice C

Step-by-step explanation:

Events A and B are independent if the equation P(A∩B) = P(A) · P(B) holds true.

3/10≠3/5*1/4

so event A and B are not independent.

Answer:

C. The trails are not independent.

The probability of drawing one marble will not be independent of others thus option (c) is correct.

The probability of an event occurring is defined by probability.

Probability is also called chance because if you flip a coin then the probability of coming head and tail is nothing but chances that either head will appear or not.

As per the given,

Drawing 5 marbles from a bag with 10 red, 8 green, and 12 yellow marbles without replacement.

In without replacement, the remaining balls in each draw will go to be decreased thus they will be dependent events so binomial distribution will not be applied.

Hence "One marble's likelihood of being drawn won't be independent of the other marbles".

For more information about the probability,

brainly.com/question/11234923

#SPJ5

d-Denis

e-Earl

d+e=42

e+8=d

e+8+e=42

2e+8=42

2e=34

e=17

d=17+8=25

Denis is 25 and Earl is 17

Answer

Earl is 17 years old.

Denis is 25 years old.

See? Easy!

Step-by-step explanation:

Answer:

[tex]cos150 = -\frac{\sqrt{3} }{2}[/tex]

Step-by-step explanation:

Recall the unit circle. At 150 deg, the point value is (-sqrt3/2, 1/2)

Remember the cosine is always the x-value, and sine is always the y-value.

This means that cosine will be -sqrt3/2.

Answer:   b) 1510 vehicles

Step-by-step explanation:

Total: 5 miles x 5280 ft per mile = 26,400

Cars: 80% of vehicles are cars with a length of 13.5 =  0.8(13.5)v = 10.8v

Trucks: 20% of vehicles are trucks with length of 20 = 0.2(20)v = 4v

Between: Distance between two vehicles is 3: (3/2)v = 1.5v

Total  = Cars + Trucks + Between

26,400 = 10.8v + 4v + 1.5v

26,400 = 16.3v

1619.6 = v

the closest number of all of the options is (b) 1510

Answer:

5.625 = 45/8 = 5 5/8

Step-by-step explanation:

Answer:

[tex]\dfrac{y^2}{225} -\dfrac{x^2}{216}=1[/tex]

Step-by-step explanation:

For a hyperbolic mirror the two foci are 42 cm apart.

The distance between the foci = 2c.

Therefore:

The distance of the vertex from one focus = 6 cm

The distance of the vertex from the other focus = 36 cm

2a=36-6=30

Now:

[tex]c^2=a^2+b^2\\21^2=15^2+b^2\\b^2=21^2-15^2\\b^2=216\\b=6\sqrt{6}[/tex]

If the transverse axis lies on the y-axis, and the hyperbola is centered at the origin. Then the hyperbola has an equation of the form:

[tex]\dfrac{y^2}{a^2} -\dfrac{x^2}{b^2}=1[/tex]

Therefore, the equation of the hyperbola is:

[tex]\dfrac{y^2}{225} -\dfrac{x^2}{216}=1[/tex]

Answer:

14, 32

Step-by-step explanation:

45,15,44,17,40,20,31,25

this is combination of 2 series:

In the first series we can see the pattern as:

In the second series we can see the pattern as:

The series will continue as:

Answer:

14, 32

Step-by-step explanation:

lol :D

Answer:

a.vertical translation

Answer:

10

-5

Step-by-step explanation:

5 - -5

Subtracting a negative is like adding

5+5 = 10

-9 - -4

-9+4

-5

Answer:

Step-by-step explanation:

5+5 = 10

-9+4 = -5

Answer:

A

Step-by-step explanation:

(2,1) - only one in the table. Remember (x,y)

Answer:

A --- unless d is supposed to be "y= -7x + 2"

Step-by-step explanation:

The slope is m in y=mx + b

So:

a. y= -2x + 11 slope= -2

b. y= x + 4 slope= 1

c. y= -x + 7 slope= -1

d. y= -7 + 2 (I don's see an x but if there were an x I assume that the slope would equal -7)

The higher the m value, the steeper the slope because it is m/1

So, -2/1 is steeper than 1/1 or -1/1

Answer:

19.51% probability that none of them voted in the last election

Step-by-step explanation:

For each American, there are only two possible outcomes. Either they voted in the previous national election, or they did not. The probability of an American voting in the previous election is independent of other Americans. So we use the binomial probability distribution to solve this question.

Binomial probability distribution

The binomial probability is the probability of exactly x successes on n repeated trials, and X can only have two outcomes.

[tex]P(X = x) = C_{n,x}.p^{x}.(1-p)^{n-x}[/tex]

In which [tex]C_{n,x}[/tex] is the number of different combinations of x objects from a set of n elements, given by the following formula.

[tex]C_{n,x} = \frac{n!}{x!(n-x)!}[/tex]

And p is the probability of X happening.

42% of Americans voted in the previous national election.

This means that [tex]p = 0.42[/tex]

Three Americans are randomly selected

This means that [tex]n = 3[/tex]

What is the probability that none of them voted in the last election

This is P(X = 0).

[tex]P(X = x) = C_{n,x}.p^{x}.(1-p)^{n-x}[/tex]

[tex]P(X = 0) = C_{3,0}.(0.42)^{0}.(0.58)^{3} = 0.1951[/tex]

19.51% probability that none of them voted in the last election

Answer:

Step-by-step explanation:

it is -12 because -6 plus -6 is also like 6 plus 6

and then you have to add the negative Sign.

pls brainliest me

-6 - 6 = - 12

Happy to help! Please mark as the brainliest!

Answer:

i dont really know what it is