Answer:
Inertia
Explanation:
The term for the tendency is inertia.
The inertia of a body is the tendency of the body to remain unmoved when at rest and the tendency to keep moving when in motion. In other words, it is the tendency of a body to remain in a state of rest or motion.
A static body will remain in a state of perpetual rest if no force acts on it and a moving body will keep moving in the same direction if no force acts on it. The force that needs to be overcome in order to change the state of the object is otherwise known as inertia force.
Missy's favorite ride at the Topsfield Fair is the rotor, which has a radius of 4.0 m. The ride
takes 2.0 s to make one full revolution. a) What is Missy's linear speed on the rotor? b) What is
Missy's centripetal acceleration on the rotor? If her mass is 50-Kg, how is the centripetal force
compare to her weight?
Answer:
a. 12.57 m/s b. 39.5 m/s² c. Her centripetal force is four times her weight.
Explanation:
a. What is Missy's linear speed on the rotor?
Missy's linear speed v = 2πr/T where r = radius = 4.0 m and T = time it takes to complete one revolution = 2.0 s
So, v = 2πr/T
= 2π(4.0 m)/2.0 s
= 4π m/s
= 12.57 m/s
b. What is Missy's centripetal acceleration on the rotor?
Missy's centripetal acceleration, a = v²/r where v = linear velocity = 12.57 m/s and r = radius = 4.0 m
a = v²/r
= (12.57 m/s)²/4.0 m
= 158.01 m²/s² ÷ 4.0 m
= 39.5 m/s²
c. If her mass is 50-Kg, how is the centripetal force compare to her weight?
Her centripetal force F = ma where m = mass = 50 kg and a = centripetal acceleration = 39.5 m/s².
Her weight W = mg where m = mass = 50 kg and g = acceleration due to gravity = 9.8 m/s².
So, comparing her centripetal force to her weight, we have
F/W = ma/mg
= a/g
= 39.5 m/s² ÷ 9.8 m/s²
= 4.03
≅ 4
So her centripetal force is four times her weight.
calculate the density of gold if 96500kg mass of gold is adjusted in the volume of 5m cube
Answer:
96500÷5=19300
Explanation:
96500÷5=19300
In what direction do the velocity vectors point in circular motion?
The velocity vector is always perpendicular to the radius. By radius, I mean the inward centripetal force that pulls the object to continue on its curved path. Without this inward force, the object would continue on a straight path tangential to the curve it was previously on.
A car accelerates uniformly from rest and
reaches a speed of 9.2 m/s in 9.7 s. The
diameter of a tire is 47.8 cm.
Find the number of revolutions the tire
makes during this motion, assuming no slip-
ping
Answer in units of rev.
Answer:
29.75 revolutions
Explanation:
The kinematic formula for distance, given a uniform acceleration a and an initial velocity v₀, is
[tex]d=v_0t+\frac{1}{2}at^2[/tex]
This car is starting from rest, so v₀ = 0 m/s. Additionally, we have a = 9.2/9.7 m/s² and t = 9.7 s. Plugging these values into our equation:
[tex]d=0t+\frac{1}{2}\left(\frac{9.2}{9.7}\right)(9.7)^2\\d=\frac{1}{2}(9.2)(9.7)\\d=4.6(9.7)\\d=44.62[/tex]
So, the car has travelled 44.62 m in 9.7 seconds - we want to know how many of the tire's circumferences fit into that distance, so we'll first have to calculate that circumference. The formula for the circumference of a circle given its diameter is [tex]c=\pi{d}[/tex], which in this case is 47.8π cm, or, using π ≈ 3.14, 47.8(3.14) = 150.092 cm.
Before we divide the distance travelled by the circumference, we need to make sure we're using the same units. 1 m = 100 cm, so 105.092 cm ≈ 1.5 m. Dividing 44.62 m by this value, we find the number of revs is
[tex]44.62/1.5\approx29.75[/tex] revolutions
Selective breeding has been used to create plants that are more resistant to disease. Of what is this an example? A an organism being used as part of a technological process B an organism being changed through technological methods C a new technology inspired by the natural structure of a living organism D a new technology being directly developed from the structure of an organism
Answer:
B. an organism being changed through technological methods
Explanation:
Science can be defined as a branch of intellectual and practical study which systematically observe a body of fact in relation to the structure and behavior of non-living and living organisms (animals, plants and humans) in the natural world through experiments. One of the most important branch of science is bioengineering. Bioengineering can be defined as a high-tech process which avail scientists the opportunity or ability to modify, remove, replace and insert Deoxyribonucleic Acid (DNA) sequence in a living organism such as bacterias, animals, plants etc in order to correct a genetic disorder and to improve on their physical and chemical conditions.
Selective breeding has been used to create plants that are more resistant to disease. Thus, this is an example of an organism being changed through technological methods.
what effect does an unbalanced force have on an object?
Answer:
An unbalanced force can change an object's motion. An unbalanced force acting on a still object could make the object start moving. An unbalanced force acting on a moving object could make the object change direction, change speed, or stop moving.
What is the relationship between the force of gravity and the distance between the two objects involved?
Answer:
They are inversely proportional
Explanation:
The force of gravity and the distance between two objects involved are inversely proportional to one another.
According to newton's law of universal gravitation "the force of gravity between two bodies is a product of their masses and inversely proportional to the distances between them".
The force of gravity and distance between two bodies are inversely related. The larger the distance between two bodies the lesser the force of gravity between them.Please help I’m begging I have to get this in by tonight
Answer:
Divide Whole Numbers by Fraction Worksheet
To divide fractions, you need to invert the divisor and multiply. To invert a fraction, reverse the numerator and denominator. The special name given to an inverted fraction is reciprocal. Recall that a whole number has a understood denominator of 1.
Drag the tiles to the correct boxes to complete the pairs. Not all tiles will be used. Match the reactants with the products.
This is an incomplete question, the complete question is given below.
Drag the tiles to the correct boxes to complete the pairs. Not all tiles will be used. Match the reactants with the products.
copper sulfate + oxygen
copper oxide
zinc sulfate + copper
aluminum chloride + copper
copper + water
copper sulfate + zinc →
aluminum + copper chloride →
copper oxide + hydrogen →
copper + oxygen →
Answer :
Copper sulfate + Zinc → Zinc sulfate + copper
Aluminium + Copper chloride → Aluminium chloride + copper
Copper oxide + Hydrogen → Copper + Water
Copper + Oxygen → Copper oxide
Explanation :
As we know that chemical reaction is a reaction in which two or more than two substances or reactants are reacted to give two or more than two different products.
According to the question:
Copper sulfate + Zinc → Zinc sulfate + copperThis reaction is a single replacement reaction in which zinc is more reactive than copper and zinc displaces copper from its salt to give products.
Aluminium + Copper chloride → Aluminium chloride + CopperThis reaction is a single replacement reaction in which aluminium is a more reactive element than copper and aluminium displaces copper from its salt to give products.
Copper oxide + Hydrogen → Copper + waterThis reaction is a single replacement reaction in which hydrogen displaces less reactive metals from their oxide to form water and the metal.
Copper + Oxygen → Copper oxideThis reaction is a synthesis reaction in which two different atoms or molecules combine to form single compound.
Answer:
Copper sulfate + Zinc → Zinc sulfate + copper
Aluminium + Copper chloride → Aluminium chloride + copper
Copper oxide + Hydrogen → Copper + Water
Copper + Oxygen → Copper oxide
Explanation:
guy above me
Define kinetic energy?
Answer:
the form of energy that makes something move
Explanation:
Someone pleaseeeee helppp
Explanation:
it's lead because see it's density if u have more density the voice will be slowest
What is the connection to Canadian technology/development with the Kepler space telescope?
Answer:One of this country's most notable achievements will be spending Canada Day weekend marking its own milestone anniversary in a unique place, floating up in space.
After 10 years in the ether, several times farther from Earth than the International Space Station, it remains the world's smallest space telescope.
MOST was also Canada's first-ever space telescope when it was launched into space on June 30, 2003.
It has helped make Canada a leader in the field of micro satellites.
But Matthews is particularly enthused about all the other possibilities that might be opened up by the 60-kilogram MOST.
The colorful University of British Columbia astrophysicist firmly believes there is life outside our solar system.
"Certainly simple forms of life like microbial life is probably very common — and I hope complex life," Matthews said in a recent interview. "If it's out there, we're finding the places where it's most likely to live."
I have no Idea if this helps but hope it does.
A 12 kg deer is running with 126 kg•m/s of momentum. What is the deer’s velocity?
Explanation:
HERE,
momentum =126 kg.m/s
weight =12 kg
we know that,
[tex]\tt{ velocity =\dfrac{momentum }{weight} }[/tex]
According to the question,
Deers velocity
=[tex]\tt{\dfrac{126}{12} }[/tex] ⠀
=[tex]\tt{ 10.5 }[/tex] ⠀
Deers velocity is 10.5 m/s.
I NEED HELP ASAP
____________ is the measure of how effectively a force causes rotation.
a. inertia
c. centripetal force
b. torque
d. none of the above
Please select the best answer from the choices provided
A
B
C
D
Answer:
I believe the answer is C
Explanation:
because centripetal force is generally assosiated with rotation and how fast something spins
Torque is the measure of how effectively a force causes rotation because centripetal force is generally assosiated with rotation and how fast something spins.
What is torque?Torque is a pattern of the force that can make a victim to revolve on an axis. The torque's direction vector based on the force's direction on the axis.
The SI unit of torque is the Newton-meter. The Torque can be both static or dynamic.
A static is one that does not generate an angular acceleration.
The Torque's magnitude vector ζ for a torque generated by a given force F is;
ζ = F .r sin(θ)
where,
r is the width of the moment arm
θ is the angle within the force vector and the moment arm.
In rotational kinematics, torque is measured as;
ζ = Iα
Where,
α is the angular acceleration
I is the rotational inertia
therefore, Torque is the measure of how effectively a force causes rotation because centripetal force is generally assosiated with rotation and how fast something spins.
Learn more about torque;
https://brainly.com/question/15012639
#SPJ6
Gravity and inertia are the two forces that keep Earth in its orbit as it travels around the Sun. What would happen if the force of inertia disappeared?
A.
Earth would leave the solar system.
B.
There would be no changes in Earth's orbital path.
C.
Earth would break apart.
D.
Earth would be pulled into the sun.
Need 100 IQ and more
A food package is dropped from a helicopter flying horizontally at a height of 125m. If the magnitude of the velocity of the packageafter 2seconds is 25m/s. Find
a. The speed of the helicopter at the moment the package is dropped.
b. The position of the package after 2s.
c. The time of flight of the food package
d. The horizontal distance covered.
Answer:
a. The speed of the helicopter at the moment the package is dropped is approximately 15.519 m/s
b. The position of the package 2s after it is dropped is (31.038 m, -9.8 m)
c. The time of flight of the food package is approximately 5.105 seconds
d. The horizontal distance covered is approximately 79.22 m
Explanation:
The given parameters are;
The height at which the helicopter is flying = 125 m
The magnitude of the velocity of the package after 2 seconds, v = 25 m/s
a. The vertical velocity of the package, [tex]v_y[/tex], is given as follows;
[tex]v_y[/tex] = [tex]u_y[/tex] + g·t
Where;
[tex]u_y[/tex] = 0 m/s for the dropped food package
t = The duration of the package in the air = 2 s
g = The acceleration due to gravity = 9.8 m/s²
Therefore;
[tex]v_y[/tex] = g·t = 9.8 m/s² × 2 s = 19.6 m/s
We have, [tex]v = \sqrt{v_x^2 + v_y^2}[/tex],
Where;
vₓ = The horizontal velocity of the food package = The horizontal speed of the helicopter
therefore, [tex]v_x = \sqrt{v^2 - v_y^2}[/tex], which gives;
[tex]v_x = \sqrt{v^2 - v_y^2} = \sqrt{25^2 - 19.6^2} \approx 15.519 \ m/s[/tex]
The speed of the helicopter at the moment the package is dropped ≈ 15.519 m/s
b. The vertical if the package after 2 s is given as follows;
The vertical position of the package after 2 s is given by the kinematic equation, h = 1/2·g·t² = 1/2 × 9.8 m/s² × 2 s = 9.8 m
The food package is located 9.8 m vertically below the point where it is dropped
The horizontal position, x, of the package after 2 s is given by the following kinematic equation, x = vₓ × t
Therefore, x = 15.519 m/s × 2 s ≈ 31.038 m
The coordinates of the location of the package 2 seconds after it is dropped is (31.038 m, 9.8 m)
c. The time of flight, [tex]t_{tot}[/tex], of the food package which is the time it takes the package to reach the ground from 125 m, is given as follows;
[tex]t_{tot} = \sqrt{\dfrac{2 \cdot h}{g} } = \sqrt{\dfrac{2 \times 125 \ m}{9.8 \ m/s^2} } \approx 5.051 \ seconds[/tex]
The time of flight of the food package, [tex]t_{125}[/tex] ≈ 5.105 seconds
d. The horizontal distance covered, [tex]x_{tot}[/tex] = vₓ × [tex]t_{tot}[/tex] ≈ 15.519 m/s × 5.105 s = 79.224495 m ≈ 79.22 m.
Which of the following is NOT a component of the systemic circuit?
A. Left atria
B.Left ventricle
C. Pulmonary aortic valve
D. Bicuspid valve
Answer:
THE CORRECT ANSWER IS OPTION ( c )Pulmonary aortic valve
Explanation:
Pulmonary aortic valve is not a component of systemic circuit.
Systemic circuit?Systemic circuit is a part of circulatory system that help to transport blood to different part of the body. It transport blood from the left ventricle to the capillaries and then other part of the body.
Therefore, Pulmonary aortic valve is not a component of systemic circuit.
Learn more about systemic circuit.
https://brainly.com/question/2035735
#SPJ2
High- and low-pressure areas leading to air movement happen when there are differences in which factor?
clouds
density
atmosphere
precipitation
whoever gets the answer will get brainliest!! :D
Answer:
The answer is density
Explanation:
They density of the air is what makes a difference.
An object of mass 8 kg Is attached to a massless string of length 2 m And Suong With a tangentialVelocity of 3 m/s what isThe tension in the string
Answer:
36 N
Explanation:
The tension on the string :
T =mv²/r ------where
m= mass of object = 8 kg
v= tangential velocity = 3 m/s
r= length of the string = 2m
T= [ 8 * 3² ] / 2
T= 36 N
What is the relationship between Newton's first law of motion and inertia?
Explanation: Newton's first law of motion states that a body at rest remains at rest, or, if in motion, remains in motion at a constant velocity unless acted on by a net external force. This is also known as the law of inertia. Inertia is the tendency of an object to remain at rest or remain in motion.
Which one is NOT an application of heating effect of electric current ? * Required to answer. Single choice.(1 Point) Electric bulb Electromagnet Electric water heater
Answer:
Electromagnet.
Explanation:
Electric bulb and electric water heather are application of heating effect of electric current. The electromagnet is not the result of heating effect of electric current. The bulb gives light due to the heating effect similarly the water is heated or warmed by the heating effect of electric current.
PLEASE The weight of a girl is 600 N and the area of her one foot is 50 cm². What will be the pressure exerted by her on theground?
Answer:
pressure=force/area
p=600/50
p=12
so 12Nm^-1
Which of the following are electromagnetic waves?
Answer:
Microwaves
Radiowaves.
Answer:
radio waves
microwaves
infrared (IR)
visible light
ultraviolet light (UV)
X-rays
gamma rays
Explanation:
these are the electromagnetic spectrum. they are arranged in decreasing wavelength and increasing energy and frequency.
pls help as fast as you can WILL GIVE BRAINLEIST
Identify 3 specific situations in which machines make work easier and explain why
Answer:
Does the Work for youMore EfficientChanges the Size of ForceHere's why this is correct
According to BrightHubEducation, Machines make work easier by changing the size of force, direction of force, or distance the force acts on. Lifting a car with a flat tire and loosening the lug nuts can be accomplished by a single person thanks to simple machines. The jack and lug wrench are simple machines that alter the force needed to change the tire.
Hope this helps! <3
what is the volume of the following: *
110
121
120
Answer:
120
Explanation:
10 x 3 = 30
30 x 4 = 120
I hope this helps u! :D
Answer: ayee fanks bro
Explanation:
an object is moving along a straight road at the speed of 6 km per hour
a,how future away is the object every one hour
Answer:
6km
Explanation:
a bicycle wheel with a radius of 0.31 m rotates with an angular speed of 21 rad/s about its axle, which is at rest. What is the linear speed of a point on the rim of the wheel
Answer:
The linear speed is 6.51 m/s
Explanation:
Uniform Circular Motion
It's a movement of an object along the circumference of a circle. It can also be defined as a rotation along a circular path.
The angular speed can be calculated as follows:
[tex]\displaystyle \omega=\frac{v}{r}[/tex]
Where:
v = tangential or linear speed
r = radius of the circle described by the rotating object
To calculate the linear speed, solve for v:
[tex]v = \omega\cdot r[/tex]
[tex]v = 21\ rad/s\cdot 0.31\ m[/tex]
[tex]v = 6.51\ m/s[/tex]
The linear speed is 6.51 m/s
George rides his bike to his friend’s house that is 5 kilometers from his house. If he rides his bike at an average speed of 15 km/h, how long will it take him to get to his friend’s house?
Answer:
It will take George 20 minutes to get to his friends house.
Explanation:
divide 5km by 15km and get a constant of 3
George is riding at 15KM/HR meaning divide the hour by 3
60 minutes by 3 is 20
5.How far must a 5 N force pull a 50 g toy car if 30 J of energy are transferred?
Answer:
5 meters
Explanation:
Step one:
given data
mass of the toy car= 50g
Work done= 30J
Force applied F= 5N
Required
The distance moved
Step two:
The expression for the work done is given as
WD= force * distance
substitute
30= 5*d
divide both sides by 5
d=30/5
d= 5m
The distance moved is 5 meters
two carts are pushed apart by an expanding spring, as shown in the diagram. if the average force on the 1kg cart is 4N, what is the acceleration of each cart
The acceleration of each cart be 4 meter/second².
What is acceleration?Acceleration is rate of change of velocity with time. Due to having both direction and magnitude, it is a vector quantity. Si unit of acceleration is meter/second² (m/s²).
Given parameters:
the average force on the 1kg cart is 4N.
Hence, the acceleration of the 1 kg cart be = force/mass
= 4/1 meter/second²
= 4 meter/second².
As two carts are pushed apart by an expanding spring, the acceleration of the other carts also be 4 meter/second².
Learn more about acceleration here:
brainly.com/question/12550364
#SPJ2