When mentos and diet coke are mixed, the diet soda explodes
Explanation:
Due to the fact that the mentos are dense, they sink to the bottom of the bottle which gives the diet coke its explosion.
Answers & Explanations:
What happens when Mentos and Diet Coke are mixed?
Mentos sinks rapidly through the liquid, causing a fast, large eruption.
What causes Mentos and Diet Coke to react that way?
The addition of the Mentos leads to the rapid nucleation of carbon dioxide gas bubbles in the Diet Coke, causing them to precipitate out of the solution.
Is the reaction Chemical or Physical?
The eruption is caused by a physical reaction.
How could we prove one way or the other?
We can prove it by using the equation:
[tex]CO_{2} (aq) = Co_{2}(g)[/tex]
which statement best describes the importance of chemical equations while solving stoichiometry problems?
Answer:
a
Explanation:
A balanced chemical equation shows reacting ratios of all substances involved in reaction in terms of grams which is important while solving stoichiometry problems.
What is chemical equation?Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.
A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .
The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.
Learn more about chemical equation,here:
https://brainly.com/question/28294176
#SPJ3
At 45.0 C and a pressure of 9.9 kPa a sample of gas has a volume of 1.033 L. If the pressure is increased to 1245 kPa what will the new volume be?
Answer:
The new volume will be 8.2 x 10⁻³ L or 0.0082 L.
Explanation:
Since our temperature remains constant, apply Boyle's Law:
P₁V₁ = P₂V₂
Plug in the initial pressure and volume on the left side, and the new pressure on the right:
9.9(1.033) = 1245(V₂)
V₂ = (9.9(1.033)) / 1245
V₂ = 8.2 x 10⁻³ L or 0.0082 L
Which statement about elements is true?
All substances are made up of elements.
There are approximately 50 elements.
An element is made up of different types of atoms.
Most elements are nonmetal.

Answer:
first one is right.
there are 117 elements, so 2nd option is wrong.
elements are made up of one type of atoms, so 3rd is also wrong.
most elements are metal. so 3rd is wrong
Coke in a Coca Cola bottle has a volume of 500 ml and a mass of 756 grams. What is its density
Answer: 1.11 g/mL is the density
Pls no links can someone pls tell me what to put to fill in the blanks please someone?????
Answer: you go down by your key bad and use those arrows
Explanation:
How much of a 0.250 M sucrose solution must be used to prepare 400.0 mL of a 0.0310 M solution? mL
Answer:
49.6 mL
Explanation:
is the answer, I just did it :)
49.6mL of a 0.250 M sucrose solution must be used to prepare 400.0 mL of a 0.0310 M solution.
What is Molarity?Molarity of a given solution is known as the total number of moles of solute per litre of the solution. A solution that is 1.00 molar (written 1.00 M) contains 1.00 mole of solute for every liter of solution.
Molarity = (No. of moles of solute ÷ Volume of solution in liters)
The unit of molarity is mol L⁻¹.
Molarity is temperature dependent because as temperature changes, volume of the solution also changes.
We can also use the formula-
M1V1 = M2V2
M1 = 0.25
V2 = 400mL
M2 = 0.0310
V1 = ?
V1 = M2V2/ M1
V1 = 49.6mL
Therefore, 49.6mL of a 0.250 M sucrose solution must be used to prepare 400.0 mL of a 0.0310 M solution.
To learn more about Molarity click:
https://brainly.com/question/8732513
#SPJ7
need the answer to this
Answer:
don't see anything
Explanation:
repost it
In a science experiment, Javi concludes that a chemical reaction has occurred. What evidence would support this conclusion?
A
a substance melted
B
a substance's color and odor changed
C
a substance's mass and texture changed
D
new atoms were created
Answer:
B) a substance's color and odor changed Explanation: A signal that a chemical change has occurred is when its odor (its smell) or its appearance has changed.
What is an example of an organism that undergoes binary fission?
Unicellular organisms such as amoeba and leishmania undergo binary fission.
What is binary fission?Binary fission can be described as a form of asexual reproduction where an organism divides into two, each part having one copy of genetic material.
Binary fission can be described as a kind of asexual reproduction observed in prokaryotes and a few single-celled eukaryotes. In asexual reproduction, there is a separation of the parent cell into 2 new daughter cells. This process occurs with the division and duplication into two parts.
Binary fission is a primary of reproduction in prokaryotic organisms. Binary Fission happens without spindle apparatus formation in the cell. The single DNA molecule starts replication and attaches each copy to parts of the cell membrane.
Prokaryotes and eukaryotes such as euglena reproduce via binary fission. This process is rapid, and its speed varies in species. The time needed by bacteria to double the cells it has is called known as doubling time.
Learn more about binary fission, here:
https://brainly.com/question/27182022
#SPJ2
A sample of nitrogen gas occupies 1.83 L at 27 °C and 1.000 atm of pressure. What will
the volume be at -100 °C and the same pressure?
Answer:
1.06L = V₂
Explanation:
Charle's Law states that the volume of a gas is directly proportional to the absolute temperature when pressure remains constant.
The equation is:
V₁T₂ = V₂T₁
Where V is volume and T absolute temperature of 1, initial state and 2, final state of the gas.
V₁ = 1.83L
T₂ = -100°C + 273.15 = 173.15K
V₂ = ?
T₁ = 27°C + 273.15 = 300.15K
V₁T₂ = V₂T₁
1.83L*173.15K = V₂*300.15K
1.06L = V₂solid liquid and gas is physical or chemical explain
Answer: Physical change
Explanation: I said physical change because its changing the form of the substance and also solid to gas are sublimating
The chemical equation below is correctly balanced.
4 Al + 3 O2 → 2 Al2O3
How many moles of Al2O3 will be formed when 27 grams of Al reacts completely with O2?
Answer:
0.35moles
Explanation:
when 156g of Al reacts with 2molesof Al2O3 then 27g of Al reacts with what then u cross multiply and solve ur answer
0.35moles of Al[tex]_2[/tex]O[tex]_3[/tex] will be formed when 27 grams of Al reacts completely with O[tex]_2[/tex]. A mole consists of precisely 6.022× 10²³particles.
What is mole?A mole is just a measuring scale. In reality, it's one of the International System of Units' seven foundation units (SI). When already-existing units are insufficient, new ones are created. The levels at which chemical reactions frequently occur exclude the use of grams, yet utilizing actual numbers of atoms, molecules, or ions would also be unclear.
A mole consists of precisely 6.022× 10²³particles. The "particles" might be anything, from tiny things like electrons and atoms to enormous things like stars or elephants.
4 Al + 3 O[tex]_2[/tex] → 2 Al[tex]_2[/tex]O[tex]_3[/tex]
moles of aluminium = 27 /26=1.03moles
The mole ratio between Al and Al[tex]_2[/tex]O[tex]_3[/tex] is 2:1
mole of Al[tex]_2[/tex]O[tex]_3[/tex]= 0.35moles
Therefore, 0.35moles of Al[tex]_2[/tex]O[tex]_3[/tex] will be formed when 27 grams of Al reacts completely with O[tex]_2[/tex].
To know more about mole, here:
https://brainly.com/question/15209553
#SPJ6
CH3 CH3 CH3-CH2-CH=CH-CH-CH-C-CH-CH3 CH3 COMO SE LLAMA?
5 Facts about cell division
A gaseous mixture containing 1.5 mol of Ar and 3.5 mol of CO2 has a total pressure of 7.0 atm . What is the partial pressure of CO2.
Answer:
4.9 atm
Explanation:
Given:
Total pressure = 7.0 atm
(Total number of moles)=[ (1.5 mol arg) + (3.5 mol co2) ]
= 5 moles
Let Partial pressure of CO2 gas = P(CO2)
✓✓partial pressure of CO2 can be calculated using below expresion.
P(CO2) / Total pressure = (moles of CO2 gas) / Total number of moles
✓✓ Let us substitute the values into the above expresion.
[P(CO2) / 7.0 atm ] = [3.5 mol / 5 moles]
P(CO2)= [7 atm × 3.5 moles] / [5 moles]
= 4.9 atm
Hence, the partial pressure of CO2 is 4.9 atm
Answer:
Partial pressure of CO₂ = 4.9 atm
Explanation:
From the question given above, the following data were obtained:
Mole of Ar = 1.5 moles
Mole of CO₂ = 3.5 moles
Total pressure (Pₜ) = 7.0 atm
Partial pressure of CO₂ =?
Next, we shall determine the mole fraction of CO2. This can be obtained as follow:
Mole of Ar = 1.5 moles
Mole of CO₂ = 3.5 moles
Total mole = 1.5 + 3.5
Total mole = 5 mole
Mole fraction of CO₂ = mole of CO₂ / total mole
Mole fraction of CO₂ = 3.5 / 5
Mole fraction of CO₂ = 0.7
Finally, we shall determine the partial pressure of CO₂. This can be obtained as follow:
Total pressure (Pₜ) = 7.0 atm
Mole fraction of CO₂ = 0.7
Partial pressure of CO₂ =?
Partial pressure of CO₂ = mole fraction of CO₂ × total pressure
Partial pressure of CO₂ = 0.7 × 7
Partial pressure of CO₂ = 4.9 atm
What is the kinetic energy of a rock with a mass of 50 kg and a velocity of 30 m/s?
Answer:
100 thousand dollars bobvieijefn iojef
Explanation:
your mom gae
What is the name of this compound?
C6H6-
C=O-
H
Answer: Benzaldahyde
Explanation: the C₆H₅- represents the substituted benzene ring and the
CHO should represent the functional group of aldehyde
Answer:
The name of the compound is benzaldehyde
chemistry-mole calculations
Answer:
somebody answer this please>>>!!!
Explanation:
!!!
Kathy is trying to conduct an experiment she wants an element that is
very reactive, which of these should she use?
Which chemical equation is a model of a decomposition reaction?
Answer:
The answer is C
It's a model of Decomposition reaction
Tonsils are lymphatic organs located in the...
A. armpits.
B. bones.
C. throat.
D. ribs.
Answer:
C. throat
Explanation:
A ballon filled with helium a pure substance or a mixture?
Answer:
Balloon filled with helium is not a mixture because the gas in it consists of solely helium atoms.
Explanation:
Explanation:
An element is a pure substance as well, because if we fill up a balloon with just helium gas, it will only contain helium atoms.
electrolytic dissociation of ethanoic acid pls
What mass of iron (ciron= 0.11 cal/g°C) would need 1450 cal of energy in order to raise its temperature by 19.7°C
Answer: m=Q/c*\Delta TQ/c∗ΔT = 1450cal/(0.11cal/g* 19.7ºC)=669.12 g1450cal/(0.11cal/g∗19.7ºC)=669.12g
Answer: 669.12g iron.
Explanation:
Which two elements on the periodic table share the same period and are both gases?
A. Hydrogen and Helium
B. Fluorine and Bromine
C. Lithium and Potassium
D. Xenon and Argon
Apply Concepts H2O and H2O2 are binary molecular compounds generally known by their common names, “water” and “hydrogen peroxide.” Following the naming conventions you identified for molecular compounds, what would their names be? Explain your reasoning.
A compound that consists of two non-metal elements in its structure and compound is called a binary molecular compound. They can have two different elements in their structures bonded by various bonds like carbon dioxide, sodium chloride etc.
The naming of [tex]\rm H_{2}O[/tex] is dihydrogen oxygen and of [tex]\rm H_{2}O_{2}[/tex] is dihydrogen dioxygen.
How to name binary molecular compounds?[tex]\rm H_{2}O[/tex] is a water molecule and is a binary molecular compound as it has one element of oxygen and other elements of hydrogen. The compound has two hydrogen and one oxygen atom and thus will be named dihydrogen oxygen.[tex]\rm H_{2}O_{2}[/tex] is the peroxide and is a binary molecular compound as it also has hydrogen and oxygen element in its structural formula. The compound has two oxygen and two hydrogen elements in its structure and therefore, will be named dihydrogen dioxygen.Thus, the naming of water is dihydrogen oxygen and hydrogen peroxide is dihydrogen dioxygen.
Learn more about binary molecular compounds here:
https://brainly.com/question/2679241
120.0 g of 4.0°C water (Specific Heat: 4.184J/g°C) is heated until its temperature is 35°C. Calculate the amount of heat energy needed to cause this rise in temperature?
Answer: I got 15.56
Explanation: I am so sorry if that's wrong but I used the equation Q=m×c×ΔT where
m=mass
ΔT= temp change that occurs
c= specific heat capacity
good luck, again sorry if i totally biffed that
What do you predict might happen if groundwater sources around the world continue to be depleted faster than they are restored?
I'll mark brainliest!
PLZ HELP!
Are water waves transverse or longitudinal? How do you know? IN YOUR OWN WORDS.
Answer:
sound waves in air and water are longitudinal. Their disturbances are periodic variations in pressure that are transmitted in fluids. Figure 13.5 the wave on a guitar string is transverse
I need help...well honestly I don't wanna do it so can someone help because this is just confusing....I don't need any citing or whatever just give me a short explication of how Denver is mile high....thank youuu...
Answer: Denver is named after James W. Denver, a governor of the Kansas Territory. It is nicknamed the Mile High City because its official elevation is exactly one mile (5280 feet or 1609.344 meters) above sea level.