Answer:
1) 5.0 mL, 4.0 mL, 3.0 mL and 2.0 mL respectively.
2) 3.0 mL
Explanation:
Hello there!
1) In this case, by considering that the equation we use for dilutions contain the initial and final concentrations and volumes:
[tex]C_1V_1=C_2V_2[/tex]
For the first four solutions, we compute the volume of the stock one (V1) as shown below:
[tex]V_1=\frac{C_2V_2}{C_1}[/tex]
Thus, we obtain:
[tex]V_1^1=\frac{3.5x10^{-5}M*10.00mL}{7.0x10^{-5}M} =5.0mL\\\\V_1^2=\frac{2.8x10^{-5}M*10.00mL}{7.0x10^{-5}M} =4.0mL\\\\V_1^3=\frac{2.1x10^{-5}M*10.00mL}{7.0x10^{-5}M} =3.0mL\\\\V_1^4=\frac{1.4x10^{-5}M*10.00mL}{7.0x10^{-5}M} =2.0mL[/tex]
2) In this case, for a final concentration of 2.1x10-5 M and a volume of 10.00 mL, the volume of the stock solution would be:
[tex]V_1=\frac{2.1x10^{-5}M*10.00mL}{7.0x10^{-5}M} =3.0mL[/tex]
Best regards!
When H+ forms a Bond with H2O to form the Hydronium ion H3 plus this bond is called a coordinate covalent bond because
Answer:
Because both the bonding electrons come from the oxygen atom. Explanation: A coordinate covalent bond is formed when both the bonding electrons are coming from the same atom
Explanation:
Deep & Thought Provoking Questions to Ask Yourself (& Others)
When was the last time you tried something new? ...
Who do you sometimes compare yourself to? ...
What's the most sensible thing you've ever heard someone say? ...
What gets you excited about life? ...
What life lesson did you learn the hard way?
Answer:
Am I supposed to answer these on brainly?
Explanation:
Given the diagram to the right what is true about the missing volume?
Answer:
C
Explanation:
Boyle's law states that "the volume of a given mass of gas is inversely proportional to its pressure at constant temperature."
Inverse proportionality means that as one quantity is increasing, the other quantity is decreasing and vice versa.
Hence, as the pressure was increased, the volume decreases accordingly in obedience to Boyle's law.
Answer:
What is TRUE about the missing volume is option C.
C. The volume will decrease due to inverse relationship of V & P
Explanation:
The given parameters of the gas are;
The initial pressure of the gas, P₁ = 2 atm
The initial volume of the gas, V₁ = 1.5 L
The final pressure of the gas, P₂ = 2 atm
Boyle's law states that, at constant temperature, the volume, 'V', of a given mass is inversely proportional to its pressure, 'P';
Mathematically, Boyle's law can be expressed as follows;
P ∝ 1/V
From which we have;
P·V = Constant
∴ P₁·V₁ = P₂·V₂
For the given gas, we get;
2 atm × 1.5 L = 6 atm × V₂
∴ V₂ = 2 atm × 1.5 L/(6 atm) = 0.5 L
Therefore, the volume decreases from 1.5 L to 0.5 L.
How are white blood cells linked to the lymphatic system?
Answer:
The lymphatic system produces white blood cells, known as lymphocytes. There are two types of lymphocyte, T cells and B cells. They both travel through the lymphatic system. As they reach the lymph nodes, they are filtered and become activated by contact with viruses, bacteria, foreign particles, and so on in the lymph fluid.
Explanation:
What makes sound waves different from light waves?
Answer:
Light waves are electromagnetic waves while sound waves are mechanical waves. light waves are transverse while sound waves are longitudinal. sound waves require a material medium to travel, and hence, cannot travel in a vacuum. the speed of light in a medium is constant.
Explanation:
Hope this helped Mark BRAINLIEST!!
Baby oil is _?_ and will not mix with water.
Can someone please help me with 1,2,3 please
WILL GIVE BRANLIEST!! EASY BUT I WAS TO LAZY TO LEARN!! WILL FOREVER BE GREATFUL!!! WILL GIVE BRANLIEST!! EASY BUT I WAS TO LAZY TO LEARN!! WILL FOREVER BE GREATFUL!!!
WILL GIVE BRANLIEST!! EASY BUT I WAS TO LAZY TO LEARN!! WILL FOREVER BE GREATFUL!!!
5. What type of reaction would the heat calculation in previous question be classified as?
A) Natural
B) Chemical
C) Endothermic
D) Exothermic
7. What causes the volume to change in gases? (Choose all that apply)
A) Density
B) Temperature
C) Shape of container
D) Pressure
Answer:
for the first one we need the previous question to be able to answer it. for the second one density and temperature
Explanation:
The concentration of sugar in Coke is approximately 10%, or 100 ppt. If you drink
a single can of coke, which holds 355 ml, how much sugar have you consumed?
Answer:
35.5g of sugar
Explanation:
To solve this question we must assume the density of coke = Density of water = 1g/mL
Thus, in a single can of coke, the mass is 355g. Now, the 10% of this coke is sugar. That means the amount of sugar you are consuming is:
355g * (10/100) = 35.5g of sugar
10/100 = 10%
Could someone please care to explain what the answer is
Calculate the percentage composition of Ca(MnO4)2.
Firstly, we see how many atoms are there for each element in the formula.
Ca= 1 atom
Mn= 2 atoms
O= 8 atoms
Next, we are going to consult our periodic table for the atomic mass of each element.
Ca= 40
Mn= 55
O= 16
Then, we have to find the molar mass for the compound..
Here is the formula for calculating molar mass of an element:
Molar Mass= ( no. of atoms of the element × atomic mass of the element)
Now, we have to calculate the atomic mass of the compound. So using the molar mass formula for an element, we calculate the molar mass for each element then we sum up their molar masses to get the compounds molar mass.
Molar mass (Ca)= 1× 40
(Ca)= 40
Molar mass (Mn)=2×55
(Mn)= 110
Molar mass (O)= 8×16
(O)= 128
Now: Molar mass( compound)= (Ca)+(Mn)+(O)
= 40+ 110 128
= 278
This is everything we need to calculate our percentage composition for each element..
* The example says to find the percentage composition for Ca. So we only find for Ca, Which is already done using the formula and the answer is 14.39%.
To prove that your answer is correct, find the percentage composition for Mn and O as well. Then you add up their percentage compositions.
If you do and you get 100 as your answer, then your percentage compositions are correct.
Why don't you try finding the percentage composition for Mn and O, then add up all the three percentage compositions. If you 100 as their sum, then your percentage composition for each of the elements are correct.
A drought hits the habitat of a semi-aquatic bird population. All ponds dry up, and fish populations decline. There are two groups of birds in the population that differ in leg length and diet. Long-legged birds eat fish, while short-legged birds eat insects. The drought has little effect on insect populations.
Answer:
The population of the long-legged birds decreases.
Explanation:
The population of the short-legged birds increases whereas the population of long-legged birds decreases due to availability of food in that environment. The long-legged birds feed on fish whose population decreases due to drought conditions so the population of long-legged birds also decreases while on the other hand, the population of short-legged birds increases or remain the same because they feed on the insects and the insects are available in large amount and less affected by the drought conditions.
A rod, X has a positive charge of 8. An otherwise identical rod, Y has a negative charge of 4. The rods are touched together, and then separated.
1.When they touch, what particles move between them?
2.Did the particles move from "X" or "Y" or from "Y" to "X"?
Answer:
1. electrons
2. From "Y" to "X"
Explanation:
1. Electrons move between the rod since the electrons are the only charge carriers which are free to move.
2. The particles move from from "Y" to "X" since the electrons are the only charge carriers which are free to move. The positive charge on rod x is due to a deficit of electrons while the negative charge on rod Y is due to the excess of electrons. When the rods come together, the electrons move from "Y" to "X" since the electrons are the only charge carriers which are free to move.
1. Which graph represents the endothermic reaction?
2. Which graph represents the exothermic reaction?
____________ are traits characteristics or features of an organism that are passed from parent to offspring
Answer:
Heredity, also called inheritance or biological inheritance, is the passing on of traits from parents to their offspring; either through asexual reproduction or sexual reproduction, the offspring cells or organisms acquire the genetic information of their parents.
Explanation:
Plss markk mee brainlistt
!!MARKING BRAINLIEST!! Please help this is due at midnight!! No websites please just help me! :(
Answer:
I'll do the first one for you. The reason why I'm not going to do the rest is because this is pretty simple stuff. I'll explain how I got the answer, please read it ^^ the rest of the problems should be a breeze.
1. 5.454285714285714 liters, or approx. 5.45 liters
Explanation:
P1V2 = P2V2
P1 refers to the original pressure. V1 refers to the original volume, or the amount of space the gas takes up.
P2 and V2 refer to the final pressure or volume, accordingly.
You insert the values into the equation, like so:
(8.3)(46) = (70)(x)
Now, multiply.
381.8 = 70x
Use inverse operations to find the value of x. Divide 381.8 by 70 to isolate x.
381.8/70 = x
5.454285714285714 = x
The volume of the gas when the pressure is increased to 70.0 mm Hg is approximately 5.45 liters. Don't forget about the units at the end, when you write your final answer.
Important! When pressure increases, volume decreases, and vice versa. Volume and pressure for gases are inversely proportional. So even though the pressure increased, that doesn't mean the volume increases, too.
You can check your answers easily!
Just multiply your final answer by its corresponding pressure or volume and compare it to the other. I hope that made sense. Like so:
5.454285714285714 x 70 = 381.8
8.3 x 46 = 381.8
That makes P1V2 DOES equal P2V2, and your answer is correct.
I hope this helped in time for you to submit it before the deadline! Good luck.
Tips!
For #2: I'm pretty sure the mentioning of the temperature (25.0 °C) doesn't matter. You can ignore it, it won't affect your calculations.
For #4: the standard pressure in mm Hg (millimeters of mercury) is 760 mm Hg. That's your P2.
Select what would most likely happen.
A. The plant population would increase; the fish population would increase.
B. The plant population would decrease; the fish population would increase.
C. The plant population would stay the same; the fish people would decrease.
D. The plant population would increase; the fish people would decrease.
Heat is the measure of the average kinetic energy of particles; temperature is the measure of the transfer of thermal energy .
true or false
write any two equations to illustrate that hydrogen gas is a reducing agent
What form of electromagnetic radiation does gamma radiation use?
Answer:
Gamma-rays are a form of electromagnetic radiation, as are radio waves, infrared radiation, ultraviolet radiation, X-rays and microwaves. Gamma-rays can be used to treat cancer, and gamma-ray bursts are studied by astronomers.
Explanation:
Hope this helped Mark BRAINLIEST!!!
Gamma Rays are ionizing Electromagnetic radiation, obtained by the decay of an atomic nucleus. Gamma rays are more penetrating, in matter, and can damage living cells to a great extent. Gamma rays are used in medicine (radiotherapy), industry ( Sterilization and disinfection) and the nuclear industry.
Find [H+] of a 0.056 M hydrofluoric acid solution. Ka = 1.45 x 10-7
Answer: [tex][H^+][/tex] of 0.056 M HF solution is [tex]8.96\times 10^{-5}[/tex]
Explanation:
[tex]HF\rightarrow H^+F^-[/tex]
cM 0 0
[tex]c-c\alpha[/tex] [tex]c\alpha[/tex] [tex]c\alpha[/tex]
So dissociation constant will be:
[tex]K_a=\frac{(c\alpha)^{2}}{c-c\alpha}[/tex]
Give c= 0.056 M and [tex]\alpha[/tex] = ?
[tex]K_a=1.45\times 10^{-7}[/tex]
Putting in the values we get:
[tex]1.45\times 10^{-7}=\frac{(0.056\times \alpha)^2}{(0.056-0.056\times \alpha)}[/tex]
[tex](\alpha)=0.0016[/tex]
[tex][H^+]=c\times \alpha[/tex]
[tex][H^+]=0.056\times 0.0016=8.96\times 10^{-5}[/tex]
Thus [tex][H^+][/tex] of 0.056 M HF solution is [tex]8.96\times 10^{-5}[/tex]
Help me plz I’m like slow
Answer:
probably A that's my best guess
Answer:
Hello There!!
Explanation:
The answer is A.H20.This is water which isn't an ionic compound.
hope this helps,have a great day!!
~Pinky~
Could someone please care to explain what this is please
Answer:
cierra los ojos que me vengo o me vengo
Explanation:
cierra los ojos que me vengo o me vengo cierra los ojos que me vengo o me vengo cierra los ojos que me vengo o me vengcierra los ojos que me vengo o me vengoo
Which traits do you think are passed down from alien parents to their offspring, and which traits are not? Explain.
Answer:
things like hair color, eye color, skin color, size of lips, curly or straight hair, are things that could be passed down to an offspring. Things like tattoos wont be passed down.
Explanation:
things like hair color, eye color, etc. get passed down because those are inheritable traits and things like tattoo aren't.
Which of the following statements are true about a strong base and a weak base at a pH of 11?
A. The weak base will require less HCl to bring the pH to 7 than the strong base.
B. The strong base will require less HCl to bring the pH to 7 than the weak base.
C. Both bases require the same amount of HCl to reach pH 7 because they are both at the same initial pH.
D. HCl will not bring the pH of either solution to pH 7.
Answer:
A, C, D
Explanation:
a sample of gas at 25.0 c has a volume of 11.0 L and exerts a pressure of 660.0 mmHg. how many moles of gas are in the sample
Answer: 0.391
Explanation:
Ideal gas law is valid only for ideal gas not for vanderwaal gas. Therefore, 0.38moles of gas are in the sample. Ideal gas is a hypothetical gas.
What is ideal gas equation?Ideal gas equation is the mathematical expression that relates pressure volume and temperature. There is no force of attraction between the particles.
Mathematically the relation between Pressure, volume and temperature can be given as
PV=nRT
where,
P = pressure of gas sample = 660.0mmHg=0.86atm
V= volume of gas sample =11.0 L
n =number of moles of gas sample=?
T =temperature of gas =298K
R = Gas constant = 0.0821 L.atm/K.mol
Substituting all the given values, we get
0.86atm×11.0 L =n× 0.0821×298
On calculation we get
9.46=n×24.4
number of moles of sample=0.38moles
Therefore, 0.38moles of gas are in the sample.
To learn more about ideal gas equation, here:
https://brainly.com/question/14826347
#SPJ2
What is the most important factor that determines Earth’s temperature?
Answer:
sunlight
Explanation:
the greatest factor affecting Earth is sunlight. Sun provides energy for living organisms, and it drives our planet's weather and climate by creating temperature gradients in the atmosphere and oceans.
How is thermal energy transferred between two objects that are at different temperatures?
Group of answer choices
Heat flows from the object that has more thermal energy to the object with less thermal energy.
The object at a lower temperature pulls heat from the warmer object.
Heat flows from the warmer object to the cooler object until they reach the same temperature.
Heat flows back and forth between the two objects untl they reach the same temperature.
Answer:
heat flows from the object that has more thermal more energy to the object with less thermal energy
Gerald's science teacher mixed liquid X and liquid Y, both at room-temperature, in a large beaker. two beakers of clear solutions to the left of a right-pointed arrow, and a large beaker with a clear solution to the right of the arrow The mixture in the large beaker still looked clear like water, but when the students, one at a time, carefully touched the outside of the large beaker, it felt warm to the touch. Why did the large beaker most likely feel warm? A. The two liquids were not soluble in water. B. The release of a gas heated the solution. C. A chemical reaction produced a new substance. D. The energy of mixing warmed the liquids.
Answer:
c
Explanation:
A chemical reaction produced a new substance. In a chemical reaction, the atoms that make up the reactants are rearranged to produce various products.
What is chemical reaction?chemical reaction, the transformation of one or more chemicals (the reactants) into one or more distinct compounds (the products). Chemical elements or chemical compounds make up substances.
A chemical reaction is one in which two or more reactants will react to form a new substance. When new substance will form it will produce heat. Therefore, when science teacher was mixing two liquids it was generating heat.
Heating a substance allow molecules to move faster. When heat is given to the object it will move fast. When heat will apply to a solid it will turn into liquid. When heat is supplied to the liquid it will turn into gas.
Therefore, A chemical reaction produced a new substance. In a chemical reaction, the atoms that make up the reactants are rearranged to produce various products.
To learn more about chemical reaction, refer to the link:
https://brainly.com/question/22817140
#SPJ5
1. How many moles are in 24.6 grams of NaCl?
If someone could give an explanation along with an answer that would be appreciated :)
NEED ANSWER ASAP
You are asked to make 500. mL of a 0.250 M NaCl solution. How many moles of NaCl would you need?
The moles of sodium chloride we need to make 500mL solution is 0.125 mole.
What is molarity?Molarity of any solution tells about the concentration and it is define as the no. of moles of solute present in per liter of solution, and it is represented as:
M = n/V, where
M = molarity of given NaCl solution = 0.250M
V = volume of NaCl solution = 500mL = 0.5L
No we put these values on the above equation and calculate for n, we get:
n = (0.250M)(0.5L) = 0.125 mole
Hence, required moles of NaCl is 0.125 mole.
To know more about molarity, visit the below link:
https://brainly.com/question/489225