To solve this problem, we need to use the coefficient of thermal expansion for steel and the volume expansion formula.
The coefficient of thermal expansion for steel is approximately 1.2 x 10^-5 /oC.
Let V1 be the initial volume of gas in the tank when the temperature is 13.0 oC and V2 be the final volume of gas when the temperature rises to 33.6 oC.
Using the volume expansion formula, we have:
V2 = V1(1 + βΔT)
where β is the coefficient of thermal expansion, ΔT is the change in temperature, and V2/V1 represents the ratio of the final volume to the initial volume.
Here's how we can calculate the amount of spilled gas:
First, let's find the volume of the tank at 13.0 oC in gallons:
V1 = 20.7 gallons
Next, let's calculate the change in volume due to the temperature increase:
ΔV = V2 - V1 = V1(1 + βΔT) - V1
where ΔT = 33.6 oC - 13.0 oC = 20.6 oC
ΔV = V1(1 + βΔT) - V1
= 20.7 gallons (1 + (1.2 x 10^-5 /oC)(20.6 oC)) - 20.7 gallons
= 0.0566 gallons
Therefore, about 0.0566 gallons of gas will spill out of the 20.7 gallon tank when the temperature rises from 13.0 oC to 33.6 oC.
Learn more about temperature from
https://brainly.com/question/26866637
#SPJ11
what is the net gravitational force fout on a unit mass located on the outer surface of the dyson sphere described in part a? express your answer in newtons.
The net gravitational force on a unit mass located on the outer surface of a Dyson sphere would be zero.
As I don't have the information from part A of your question, I will provide a general explanation using the terms you provided.
The net gravitational force (Fout) on a unit mass located on the outer surface of a Dyson Sphere can be calculated using Newton's Law of Universal Gravitation. The formula is:
Fout = (G * M * m) / r^2
Where:
- Fout is the net gravitational force in Newtons (N)
- G is the gravitational constant (6.674 × 10^-11 N m²/kg²)
- M is the mass of the Dyson Sphere in kilograms (kg)
- m is the unit mass in kilograms (kg) placed on the outer surface of the Dyson Sphere
- r is the radius of the Dyson Sphere in meters (m)
However, without the specific values from part A, I cannot provide a numerical answer. Please provide the details from part A, and I will gladly help you calculate the net gravitational force.
To know more about Gravitational Force visit:
https://brainly.in/question/3841670
#SPJ11
200 kPa when its temperature is 20 °C (Gauge pressure is the difference between the actual pressure and atmospheric pressure). After the car has been driven at high speeds, the tire temperature increases to 50 °C. a) Assuming that the volume of the tyre does not change, and that air behaves as an ideal gas, find the gauge pressure of the air in the tire. b) Calculate the gauge pressure if the volume of the tyre expands by 10 % .
a) The gauge pressure of the air in the tire after it has been driven at high speeds and the temperature increased to 50 °C is approximately 228.7 kPa.
b) If the volume of the tire expands by 10%, the gauge pressure of the air in the tire would be approximately 231.8 kPa.
To calculate the gauge pressure of the air in the tire, we need to use the ideal gas law, which states that the pressure of a gas is directly proportional to its temperature when the volume is constant.
The ideal gas law is given by the equation PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature in Kelvin.
a) Assuming the volume of the tire remains constant, we can use the ideal gas law to solve for the gauge pressure. First, let's convert the given temperatures to Kelvin:
Initial temperature (T1) = 20 °C + 273.15 = 293.15 K
Final temperature (T2) = 50 °C + 273.15 = 323.15 K
The initial gauge pressure (P1) is given as 200 kPa. To find the final gauge pressure (P2), we can set up the following equation using the ideal gas law:
(P1 + Patm) / T1 = (P2 + Patm) / T2
Where Patm is the atmospheric pressure (which we assume remains constant). Rearranging the equation and solving for P2, we get:
P2 = (P1 + Patm) * (T2 / T1) - Patm
Substituting the values, P1 = 200 kPa, T1 = 293.15 K, T2 = 323.15 K, and assuming Patm is 101.3 kPa, we can calculate P2:
P2 = (200 + 101.3) * (323.15 / 293.15) - 101.3
P2 ≈ 228.7 kPa
Therefore, the gauge pressure of the air in the tire after it has been driven at high speeds and the temperature increased to 50 °C is approximately 228.7 kPa.
b) If the volume of the tire expands by 10%, we need to account for this change in volume when calculating the gauge pressure. We can use the combined gas law to incorporate the volume change. The combined gas law is given by the equation PV/T = constant.
Let's denote the initial volume as V1 and the final volume as V2, where V2 = V1 + 0.1V1 = 1.1V1 (10% expansion).
Using the combined gas law, we can set up the following equation:
(P1 + Patm) / T1 = (P2 + Patm) / T2
Now, we need to consider the volume change:
(P1 + Patm) * (V1 / T1) = (P2 + Patm) * (V2 / T2)
Substituting V2 = 1.1V1, we get:
(P1 + Patm) * (V1 / T1) = (P2 + Patm) * (1.1V1 / T2)
Simplifying and solving for P2:
P2 = ((P1 + Patm) * (V1 / T1) * T2) / (1.1V1) - Patm
Substituting the values, P1 = 200 kPa, T1 = 293.15 K, T2 = 323.15 K, V1 = 1 (as it's a relative volume), and assuming Patm is 101.3 kPa, we can calculate P2:
P2 = ((200 + 101.3) * (1 / 293.15) * 323.15) / (1.1) - 101.3
P2 ≈ 231.8 kPa
Therefore, if the volume of the tire expands by 10%, the gauge pressure of the air in the tire would be approximately 231.8 kPa.
For more such questions on gauge pressure visit:
https://brainly.com/question/9019509
#SPJ8
If your car gets 37. 4 miles per gallon, how many km/L is this?
If your car gets 37.4 miles per gallon, it is approximately equivalent to 15.89 kilometers per liter.
To convert miles per gallon (mpg) to kilometers per liter (km/L), we can use the conversion factors of 1 mile ≈ 1.60934 kilometers and 1 gallon ≈ 3.78541 liters.
Given that the car gets 37.4 miles per gallon, we can calculate the equivalent in kilometers per liter.
First, we convert miles to kilometers by multiplying 37.4 mpg by 1.60934 km/mile, which gives us approximately 60.07 km/gallon.
Next, we convert gallons to liters by dividing 60.07 km/gallon by 3.78541 L/gallon, resulting in approximately 15.89 km/L.
Learn more about miles per gallon here:
https://brainly.com/question/30525562
#SPJ11
atmosphere has low air pressure and is mostly carbon dioxide
The atmosphere on Mars has a low air pressure and is mostly composed of carbon dioxide. This means that the air is thinner and less dense than on Earth, which can make it difficult for humans to breathe without the assistance of specialized equipment.
Additionally, the high levels of carbon dioxide in the atmosphere make it difficult for humans to grow crops and sustain life on the planet without the use of advanced technologies. It sounds like you're describing some characteristics of an atmosphere that has low air pressure and is mostly composed of carbon dioxide.
Here's an explanation using the terms you provided: An atmosphere with low air pressure typically has a lower density of air molecules, meaning there are fewer air molecules in a given volume compared to an atmosphere with higher pressure.
In this case, the atmosphere is primarily composed of carbon dioxide, which is a greenhouse gas. This means that the carbon dioxide in the atmosphere can trap heat, potentially causing a greenhouse effect and impacting the climate of the planet.
To know more about atmosphere visit -
brainly.com/question/32274037
#SPJ11
the standard hydrogen peroxide volume used with permanent haircolor is
The standard volume of hydrogen peroxide used with permanent hair color is typically 20 volume (6%).
The standard volume of hydrogen peroxide used with permanent hair color is typically 20 volume (6%). It is important to note that different hair color brands or formulations may offer different volumes of hydrogen peroxide options, so it is always advisable to refer to the specific instructions and recommendations provided by the hair color manufacturer.
The percentage value, in this case, 6%, indicates the weight of hydrogen peroxide present in the formulation. In a 20 volume hydrogen peroxide solution, 6% of the total weight is hydrogen peroxide, while the remaining 94% consists of other components, such as water, stabilizers, and conditioners.
Learn more about standard volume of hydrogen peroxide from
https://brainly.com/question/29160230
#SPJ11
What determines the direction that ions will move through ion channels?
- Both the ion's concentration gradient and the electrical gradient across the plasma membrane !!!
- Only the ion's concentration gradient across the plasma membrane
- Only the electrical gradient across the plasma membrane
The correct answer is: Both the ion's concentration gradient and the electrical gradient across the plasma membrane.
The movement of ions through ion channels is influenced by both the ion's concentration gradient and the electrical gradient across the plasma membrane.
The concentration gradient refers to the difference in ion concentration on either side of the membrane. If there is a higher concentration of a particular ion on one side of the membrane compared to the other, the ion will tend to move from an area of higher concentration to an area of lower concentration.
The electrical gradient, also known as the membrane potential, is the difference in electrical charge across the plasma membrane. This gradient can be established by various factors, including the distribution of ions and the activity of ion pumps and channels. The electrical gradient can influence the movement of ions by attracting or repelling them based on their charge.
Therefore, the direction that ions will move through ion channels is determined by the combined influence of both the ion's concentration gradient and the electrical gradient across the plasma membrane.
Learn more about plasma membrane here:
\https://brainly.com/question/29829956
#SPJ11
a balloon that contains 0.500 l of helium at 25 °c is cooled to 11 °c, at a constant pressure. what volume does the balloon now occupy?
To solve this problem, we can use the combined gas law, which states that the ratio of initial and final volumes of a gas is equal to the ratio of initial and final temperatures, assuming constant pressure.
(P1 * V1) / T1 = (P2 * V2) / T2
(V1 / T1) = (V2 / T2)
V1 = 0.500 L
T1 = 25 °C = 25 + 273.15 K = 298.15 K
T2 = 11 °C = 11 + 273.15 K = 284.15 K
The combined gas law equation is:
(P1 * V1) / T1 = (P2 * V2) / T2
Where P1 and P2 are the initial and final pressures, V1 and V2 are the initial and final volumes, and T1 and T2 are the initial and final temperatures.
In this case, the pressure is constant, so we can rewrite the equation as:
(V1 / T1) = (V2 / T2)
Let's plug in the given values:
V1 = 0.500 L
T1 = 25 °C = 25 + 273.15 K = 298.15 K
T2 = 11 °C = 11 + 273.15 K = 284.15 K
Now we can solve for V2:
(V1 / T1) = (V2 / T2)
(0.500 L / 298.15 K) = (V2 / 284.15 K)
V2 = (0.500 L * 284.15 K) / 298.15 K
V2 ≈ 0.477 L
Therefore, the balloon now occupies approximately 0.477 liters of volume after being cooled to 11 °C at a constant pressure.
Learn more about gas here
https://brainly.com/question/29321317
#SPJ11
more nations have gravitated toward the market-based model because
More nations have gravitated toward the model because it offers several advantages and has proven to be a successful approach in promoting economic growth and development.
Efficiency: The market-based model, characterized by free markets and competition, allows for efficient allocation of resources. It enables individuals and businesses to make decisions based on market forces, such as supply and demand, which leads to the optimal allocation of goods and services. This efficiency promotes productivity and economic growth.
Innovation and Entrepreneurship: The market-based model encourages innovation and entrepreneurship. In a competitive market, businesses are incentivized to develop new products and services to meet consumer demands. This drive for innovation fosters technological advancements, job creation, and economic dynamism.
Individual Freedom: Market-based economies prioritize individual freedom and choice. Individuals have the freedom to make decisions regarding their consumption, production, and employment. This freedom allows for personal initiative, economic mobility, and the pursuit of individual aspirations.
International Trade: Market-based economies promote international trade and globalization. By opening up to international markets, countries can benefit from the exchange of goods, services, and ideas, leading to increased economic opportunities and access to a wider range of resources.
Economic Stability: Market-based economies tend to be more resilient and adaptable to changing circumstances. The decentralized nature of markets allows for self-correction mechanisms, such as price adjustments, in response to economic shocks.
For more such questions on model visit:
https://brainly.com/question/31611675
#SPJ8
Nations have gravitated toward the market-based model because it promotes economic growth and efficiency, encourages innovation and investment, and allows for flexibility and adaptation to global trends and demands.
Explanation:More nations have gravitated toward the market-based model because it has been proven to promote economic growth and increase efficiency. The market-based model is based on the principles of supply and demand, competition, and individual choice. When countries adopt this model, it can lead to innovation, entrepreneurship, and investment, which can stimulate economic growth.
For example, countries like the United States and Germany have embraced the market-based model and have experienced significant economic development. They have seen increased productivity, job creation, and technological advancements. Additionally, the market-based model allows for flexibility and adaptation to changing global trends and demands. It encourages free trade and cooperation between nations, fostering a global economy.
Learn more about Market-based model here:https://brainly.com/question/32511996
#SPJ12
the radius of a circle is increasing at a constant rate of 0.4 meters per second. what is the rate of increase in the area of the circle at the instant when the circumference is 60 pie
The rate of increase of the area of the circle at the instant when the circumference is 60π is 24π square meters per second.
To solve this problem, we need to use the formulas for the circumference and area of a circle:
Circumference = 2πr
Area = πr^2
We are given that the radius of the circle is increasing at a constant rate of 0.4 meters per second. Therefore, the rate of increase of the radius is dr/dt = 0.4 m/s.
We are also given that the circumference of the circle is 60π at the instant we are interested in. We can use this information to find the value of the radius:
Circumference = 2πr
60π = 2πr
r = 30
Now we can use the formulas for the circumference and area to find the rate of increase of the area:
Circumference = 2πr
dC/dt = 2π(dr/dt)
dC/dt = 2π(0.4)
dC/dt = 0.8π
Area = πr^2
dA/dt = 2πr(dr/dt)
dA/dt = 2π(30)(0.4)
dA/dt = 24π
To know more about circumference visit:-
https://brainly.com/question/28757341
#SPJ11
Consider the simple model of the zoom lens shown in Fig.34.43a in the textbook. The converging lens has focal length f1=12cm, and the diverging lens has focal length f2=−12cm. The lenses are separated by 4 cm as shown in Fig.34.43a. A)Now consider the model of the zoom lens shown in Fig.34.43b, in which the lenses are separated by 8 cm. For a distant object, where is the image of the converging lens shown in Fig.34.43b, in which the lenses are separated by 8 cm? B)The image of the converging lens serves as the object for the diverging lens. What is the object distance for the diverging lens? C)Where is the final image?
In the given setup, the image of the converging lens is formed 12 cm behind it, and the final image is formed 144/13 cm behind the diverging lens.
A) In the model shown in Fig.34.43b, where the lenses are separated by 8 cm, the image of the converging lens (f1=12 cm) is formed at a distance behind the converging lens. This distance can be determined using the lens formula:
1/f1 = 1/v1 - 1/u1,
where f1 is the focal length of the converging lens and u1 is the object distance.
Since the object is assumed to be at infinity (distant object), the object distance u1 is equal to infinity. Plugging these values into the lens formula, we get:
1/f1 = 1/v1 - 1/infinity.
As 1/infinity approaches zero, the equation simplifies to:
1/f1 = 1/v1.
Rearranging the equation, we find:
v1 = f1 = 12 cm.
Therefore, the image of the converging lens is formed at a distance of 12 cm behind the lens.
B) The image formed by the converging lens (v1 = 12 cm) serves as the object for the diverging lens. The object distance for the diverging lens (f2 = -12 cm) is equal to the image distance of the converging lens, which is 12 cm.
C) To determine the position of the final image, we can use the lens formula for the diverging lens:
1/f2 = 1/v2 - 1/u2,
where f2 is the focal length of the diverging lens and u2 is the object distance.
Substituting the given values, we have:
1/-12 = 1/v2 - 1/12.
Simplifying the equation, we find:
-1/12 = 1/v2 - 1/12.
Combining the fractions, we get:
-1/12 = (12 - v2) / (12v2).
Cross-multiplying and rearranging the equation, we find:
v2 = 144/13 cm.
Therefore, the final image is formed at a distance of 144/13 cm behind the diverging lens.
To learn more about converging lens from the given link
https://brainly.com/question/15123066
#SPJ4
at what temperature will 1.30 mole of an ideal gas in a 2.40 l container exert a pressure of 1.30 atm?
Answer:
[tex]T=29.2326 \ K[/tex]
Explanation:
We can use the ideal gas law to answer this question. The ideal gas law relates a gasses pressure, volume, and temperature and is written as follows.
[tex]\boxed{\left\begin{array}{ccc}\text{\underline{The Ideal Gas Law:}}\\\\PV=nRT\end{array}\right}[/tex]
"n" is the number of moles present in the gas and "R" is referred to as the universal gas constant.
[tex]R=0.0821 \ \frac{atm \cdot L}{mol \cdot K} \ \text{or} \ 8.31 \ \frac{J}{mol \cdot K}[/tex]
Be careful when using the ideal gas law, make sure to use the appropriate R value and remember that T is measured in kelvin.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Given:
[tex]P=1.30 \ atm\\V=2.40 \ L\\n=1.30 \ mol\\R=0.0821 \ \frac{atm \cdot L}{mol \cdot K} \[/tex]
Find:
[tex]T= \ ?? \ K[/tex]
(1) - Solve the ideal gas law for "T"
[tex]PV=nRT\\\\\Longrightarrow T=\frac{PV}{nR}[/tex]
(2) - Plug the known values into the equation
[tex]T=\frac{PV}{nR} \\\\\Longrightarrow T=\frac{(1.30)(2.40)}{(1.30)(0.0821)} \\\\\therefore \boxed{\boxed{T=29.2326 \ K}}[/tex]
Thus, the gasses temperature is found.
To determine the temperature at which 1.30 mole of an ideal gas in a 2.40 L container exerts a pressure of 1.30 atm, we can use the ideal gas law equation: PV = nRT
P = pressure
V = volume
n = number of moles
R = ideal gas constant
T = temperature
We can rearrange the equation to solve for temperature (T):
T = PV / (nR)
Given:
P = 1.30 atm
V = 2.40 L
n = 1.30 mole
R = ideal gas constant (8.314 J/(mol·K))
Substituting the values into the equation:
T = (1.30 atm) * (2.40 L) / (1.30 mole * 8.314 J/(mol·K))
T ≈ 2.56 K
Therefore, at approximately 2.56 Kelvin, 1.30 mole of the ideal gas in a 2.40 L container will exert a pressure of 1.30 atm.
Learn more about temperature here
https://brainly.com/question/27944554
#SPJ11
Consider a circular tube of diameter D and length L, with a mass flow rate of m_dot. (a) For constant heat flux conditions, derive an expression for the ratio of the temperature difference between the tube wall at the tube ext and the inlet temperature, Ts(x=L) - Tm,i, to the total heat transfer rate to the fluid q. Express your result in terms of m_dot, L, the local Nusselt number at the tube exit NuD(x=L), and relevant fluid properties. (b) Repeat part (a) for constant surface temperature conditions. Express your result in temrs of m_dot, L, the average Nusselt number from the tube inlet to the tube exit NuD, and relevant fluid properties.
(a) For constant heat flux conditions, the expression for the ratio of the temperature difference between the tube wall at the tube exit (Ts(x=L)) and the inlet temperature (Tm,i) to the total heat transfer rate to the fluid (q) can be derived using the following steps:
1. Apply the energy balance equation to the tube segment of length L:
q = m_dot * Cp * (Ts(x=L) - Tm,i)
where q is the total heat transfer rate, m_dot is the mass flow rate, Cp is the specific heat capacity of the fluid, Ts(x=L) is the temperature at the tube exit, and Tm,i is the inlet temperature.
2. Substitute the heat transfer rate with the Nusselt number:
q = NuD(x=L) * k * A * (Ts(x=L) - Tm,i) / L
where NuD(x=L) is the local Nusselt number at the tube exit, k is the thermal conductivity of the fluid, and A is the cross-sectional area of the tube.
3. Rearrange the equation to solve for the desired ratio:
(Ts(x=L) - Tm,i) / q = L / (NuD(x=L) * k * A)
The right-hand side of the equation represents the thermal resistance of the tube.
Therefore, the expression for the ratio of the temperature difference between the tube wall at the tube exit and the inlet temperature to the total heat transfer rate to the fluid, under constant heat flux conditions, is L / (NuD(x=L) * k * A).
(b) For constant surface temperature conditions, the expression for the ratio can be derived similarly. However, instead of using the local Nusselt number at the tube exit, we use the average Nusselt number from the tube inlet to the tube exit (NuD). The expression becomes:
(Ts(x=L) - Tm,i) / q = L / (NuD * k * A)
The only difference is the use of the average Nusselt number (NuD) instead of the local Nusselt number (NuD(x=L)).
Therefore, the expression for the ratio of the temperature difference between the tube wall at the tube exit and the inlet temperature to the total heat transfer rate to the fluid, under constant surface temperature conditions, is L / (NuD * k * A).
Learn more about thermal conductivity here:
https://brainly.com/question/14919402
#SPJ11
A ball is released from rest at a height of 10. 0 m and free falls to the ground. When the same mass is released from rest at a height of 40. 0 m, how much more kinetic energy will it have just before reaching the ground?
The ball released from a height of 40.0 m will have 293.9 J more kinetic energy than the ball released from a height of 10.0 m.
We can solve this using the equation for gravitational potential energy:
GPE = mgh
where GPE is gravitational potential energy, m is mass, g is the acceleration due to gravity, and h is height. We know that the ball has the same mass in both scenarios, so we can simplify the equation to:
GPE = gh
Now, we can solve for the gravitational potential energy at each height and find the difference between them. For the first scenario where the ball is released from a height of 10.0 m:
GPE = (9.81 m/s²)(10.0 m) = 98.1 J
For the second scenario where the ball is released from a height of 40.0 m:
GPE = (9.81 m/s²)(40.0 m) = 392 J
The difference in gravitational potential energy is:ΔGPE = (392 J) - (98.1 J) = 293.9 J
This is the amount of kinetic energy the ball will gain as it falls from a greater height.
You can learn more about kinetic energy at: brainly.com/question/999862
#SPJ11
Determine the activation overpotential due to a cathode reaction at 80ºC and a current density of 0.85 A/cm2. The exchange current density = 1.2x10-3 A/cm2, and alpha = 0.4. a)0.132 volts. b)0.269 c)1.183 volts. d)0.250 volts. e)0.057 volts.
The activation overpotential due to the cathode reaction at 80ºC and a current density of 0.85 A/cm² is approximately 0.269 volts.
To determine the activation overpotential (η) due to a cathode reaction, we can use the Tafel equation:
[tex]\eta = (\frac {RT}{\alpha F}) \times ln(\frac {j}{j_{0}})[/tex]
where:
η = activation overpotential
R = gas constant (8.314 J/(mol·K))
T = temperature in Kelvin
α = transfer coefficient (also known as symmetry factor)
F = Faraday's constant (96485 C/mol)
j = actual current density
[tex]j_{0}[/tex] = exchange current density
Given:
T = 80ºC = 353 K
j = 0.85 A/cm²
[tex]j_{0} = 1.2\times10^{-3} A/cm^{2}[/tex]
α = 0.4
Substituting the values into the equation:
η
=[tex](\frac {RT}{\alpha F}) \times ln(\frac {j}{j_{0}})[/tex]
= [tex](\frac { (8.314 J/(mol \cdot K) \times 353 K}{0.4 \times 96485 C/mol}) \times ln(\frac {0.85 A/cm^{2}}{1.2 \times 10^{-3} A/cm^{2}})[/tex]
Calculating this expression:
[tex]\eta \approx 0.269 volts[/tex]
Therefore, the activation overpotential due to the cathode reaction at 80ºC and a current density of 0.85 A/cm² is approximately 0.269 volts.
The correct answer is (b) 0.269 volts.
Learn more about the calculation of overpotential here:
https://brainly.com/question/32196617
#SPJ4
what is the length of a box in which the minimum energy of an electron is 1.4×10−18 jj ? express your answer in nanometers.
The length of the box is approximately 0.528 nanometers. To determine the length of a box in which the minimum energy of an electron is given,
we can use the equation for the minimum energy of a particle in a one-dimensional box: E_min = (h^2 * n^2) / (8 * m * L^2)
where:
E_min is the minimum energy (given as 1.4×10^(-18) J)
h is Planck's constant (6.626 x 10^(-34) J·s)
n is the quantum number (1 for the ground state)
m is the mass of the electron (9.109 x 10^(-31) kg)
L is the length of the box (to be determined)
Rearranging the equation to solve for L, we have:
L = sqrt((h^2 * n^2) / (8 * m * E_min))
Plugging in the given values, we get:
L = sqrt((6.626 x 10^(-34) J·s)^2 * (1^2) / (8 * (9.109 x 10^(-31) kg) * (1.4×10^(-18) J)))
Calculating this expression gives:
L ≈ 0.528 nm (rounded to three decimal places)
Therefore, the length of the box is approximately 0.528 nanometers.
learn more about electron here
https://brainly.com/question/18367541
#SPJ11
Metals are often used for making designer jewelry because they
A) conduct electricity
B) do not conduct heat well
C) are shiny
D) are strong but can be bent
E) c and d
Answer:
E
Explanation:
Metals (the ones used to make jewelry) are valuable, Resistant to corrosion, and retain their appearance well over long periods of time.
(Pls mark me brainliest)
Metals are often used for making designer jewelry because they have a combination of properties that make them suitable for this purpose. One important property is their ability to be shaped and bent without breaking, which makes them ideal for creating intricate designs.
This property is due to their strength and flexibility, which allows them to be manipulated into various shapes and forms. Additionally, metals are often shiny and can be polished to a high gloss, which adds to their aesthetic appeal. While some metals such as gold and silver are good conductors of electricity, their conductivity is not the primary reason for their use in jewelry making. Similarly, while metals do conduct heat, their thermal conductivity is not a major factor in their use for making jewelry. Therefore, option E, which includes both C and D, is the most appropriate answer.
To know more about Metals visit :-
https://brainly.com/question/29404080
#SPJ11
By what factor will the intensity change when the corresponding sound level increases by 3 dB? (a) 3 (b) 0.5 (c) 2 (d) 4
The factor by which the intensity will change when the sound level increases by 3 dB is approximately 2.
When the sound level increases by 3 dB, we can determine the corresponding change in intensity using the relationship:
[tex]\triangle L = 10log10\frac {I_2}{I_1}[/tex]
where ΔL is the change in sound level in decibels, I₁ is the initial intensity, and I₂ is the final intensity.
Given that the sound level increases by 3 dB, we have:
ΔL = 3 dB
To find the corresponding change in intensity, we rearrange the equation as:
[tex]\frac {I_2}{I_1} = 10^{(\triangle L/10)}[/tex]
Substituting ΔL = 3 dB:
[tex]\frac {I_2}{I_1} = 10^{(3/10)}[/tex]
[tex]\frac {I_2}{I_1} \approx 1.995[/tex]
Therefore, the factor by which the intensity will change when the sound level increases by 3 dB is approximately 1.995. We can select the closest option, which is (c) 2.
Learn more about sound waves here:
https://brainly.com/question/32073686
#SPJ4
a balloon is rising at a rate of 4 meters per second from a point on the ground 56 meters from an observer. find the rate of change of the angle of elevation from the observer to the balloon when the balloon is 40 meters above the ground.
The rate of change of the angle of elevation from the observer to the balloon when it is 40 meters above the ground is approximately 0.0026 radians per second.
Let x be the horizontal distance from the observer to the point on the ground below the balloon, y be the height of the balloon, and θ be the angle of elevation. Given x = 56 meters, dy/dt = 4 meters per second, and y = 40 meters. We need to find dθ/dt.
Step 1: Use the tangent function: tan(θ) = y/x.
Step 2: Differentiate both sides with respect to time: sec²(θ) * dθ/dt = (dy/dt * x - y * dx/dt) / x².
Step 3: Solve for dθ/dt: dθ/dt = (dy/dt * x - y * dx/dt) / (x² * sec²(θ)).
Step 4: Plug in the given values and calculate dθ/dt: dθ/dt ≈ 0.0026 radians per second.
Learn more about elevation here:
https://brainly.com/question/30323081
#SPJ11
schoolyard teeter-totter with a total length of 6.4 m and a mass of 41 kg is pivoted at its center. a 21-kg child sits on one end of the teeter-totter. (a) where should a parent push vertically downward with a force of 210 n in order to hold the teeter-totter level? (b) where should the parent push with a force of 310 n? (c) how would your answers to parts (a) and (b) change if the mass of the teeter-totter were doubled? explain.
The parent should push (a) vertically downward with a force of 210 N (b) The parent should push vertically downward with a force (c) If the mass of the teeter-totter were doubled
What is force?
In physics, force is a fundamental concept that describes the interaction between objects or particles, resulting in a change in their motion or deformation. Force is a vector quantity, meaning it has both magnitude and direction.
The most common definition of force is given by Isaac Newton's second law of motion, which states that the force acting on an object is equal to the mass of the object multiplied by its acceleration. Mathematically, it is represented as F = m × a, where F is the force, m is the mass of the object, and a is its acceleration.
(a) The parent should push vertically downward with a force of 210 N at a distance of 2.2 m from the center of the teeter-totter to hold it level.
In order to hold the teeter-totter level, the sum of the torques acting on it must be zero. Torque is calculated by multiplying the force applied by the distance from the pivot point. Since the teeter-totter is balanced, the torque exerted by the child sitting on one end is equal to the torque exerted by the parent pushing downward. Therefore, we can set up an equation:
Torque_child = Torque_parent
(mass_child) × (gravity) × (distance_child) = (force_parent) × (distance_parent)
(21 kg) × (9.8 m/s²) × (3.2 m) = (force_parent) × (2.2 m)
Solving for force_parent, we find:
force_parent = [(21 kg) × (9.8 m/s²) × (3.2 m)] / (2.2 m) ≈ 210 N
(b) The parent should push vertically downward with a force of 310 N at a distance of 1.4 m from the center of the teeter-totter to hold it level.
Following the same logic as in part (a), we set up the equation:
(mass_child) × (gravity) × (distance_child) = (force_parent) × (distance_parent)
(21 kg) × (9.8 m/s²) × (3.2 m) = (force_parent) × (1.4 m)
Solving for force_parent, we find:
force_parent = [(21 kg) × (9.8 m/s²) × (3.2 m)] / (1.4 m) ≈ 310 N
(c) If the mass of the teeter-totter were doubled, the answers to parts (a) and (b) would remain the same. This is because the mass of the teeter-totter does not affect the balance when it is pivoted at the center.
The torque exerted by the child and the torque exerted by the parent will still be equal, and the teeter-totter will remain level. Doubling the mass would increase the overall weight of the teeter-totter, but it would not change the forces and distances needed to maintain balance.
To know more about force, refer here:
https://brainly.com/question/31046192#
#SPJ4
Certain cancers of the liver can be treated by injecting microscopic glass spheres containing radioactive 90Y into the blood vessels that supply the tumor. The spheres become lodged in the small capillaries of the tumor, both cutting off its blood supply and delivering a high dose of radiation. 90Y has a half-life of 64 h and emits a beta particle with an average energy of 0.89 MeV.
What is the total dose equivalent for an injection with an initial activity of 4.0×107Bq if all the energy is deposited in a 46 g tumor?
Express your answer with the appropriate units.
The total dose equivalent for an injection with an initial activity of 4.0×10^7 Bq, depositing all energy in a 46 g tumor, is 193.6 Gy.
To calculate the total dose equivalent, follow these steps:
1. Determine the total energy emitted: Initial activity (4.0×10^7 Bq) * average energy per decay (0.89 MeV) * half-life (64 h) * 3600 s/h * 1.602×10^-13 J/MeV = 3.31×10^4 J
2. Convert the tumor mass to kg: 46 g * 1 kg/1000 g = 0.046 kg
3. Calculate the absorbed dose: Total energy (3.31×10^4 J) / tumor mass (0.046 kg) = 719.6 J/kg
4. Convert the absorbed dose to Gy: 719.6 J/kg * 1 Gy/J/kg = 719.6 Gy
5. Since all energy is deposited in the tumor, the total dose equivalent is equal to the absorbed dose, which is 193.6 Gy.
Learn more about half-life here:
https://brainly.com/question/22574152
#SPJ11
When an object moves in uniform circular motion, the direction of its acceleration is 3 A) is directed away from the center of its circular path. B) is directed toward the center of its circular path. 6 C) depends on the speed of the object. D) in the same direction as its velocity vector. E) in the opposite direction of its velocity vector.
When an object moves in uniform circular motion, the direction of its acceleration is directed toward the center of its circular path. This means that option B) is the correct answer.
In uniform circular motion, the object moves along a circular path with a constant speed. Even though the speed is constant, the object is continuously changing its direction due to the centripetal acceleration, which is always directed toward the center of the circular path. This acceleration is responsible for keeping the object moving in a curved path instead of a straight line.
The centripetal acceleration is given by the equation:
a = (v^2) / r
Where:
a is the centripetal acceleration,
v is the velocity of the object,
r is the radius of the circular path.
Since the centripetal acceleration is directed toward the center of the circle, it is perpendicular to the velocity vector. Therefore, the acceleration and velocity vectors are orthogonal to each other. This rules out options D) and E).
Hence, the correct answer is B) is directed toward the center of its circular path.
Learn more about acceleration here
https://brainly.com/question/460763
#SPJ11
the melting points of most plastics are lower than most metals because:
A. lonic bonds are weaker than metallic bonds
B. Van der Waals bonds are weaker than metallic bonds lonic and
C. Van der Waals bonds are weaker than metallic bonds
D. None of the above
(C) The melting points of most plastics are lower than most metals because Van der Waals bonds are weaker than metallic bonds.
Determine the melting points?The melting point of a substance is the temperature at which it transitions from a solid to a liquid state. The strength of the intermolecular forces between molecules or atoms in a substance plays a crucial role in determining its melting point.
Plastics primarily consist of large, complex organic molecules held together by Van der Waals forces, which are relatively weak compared to metallic bonds. Van der Waals forces arise from temporary fluctuations in electron density, resulting in weak attractions between molecules.
On the other hand, metals have a lattice structure held together by strong metallic bonds. Metallic bonding involves the sharing of delocalized electrons among a sea of positive metal ions, resulting in strong electrostatic attractions.
Due to the weaker intermolecular forces in plastics, they have lower melting points compared to metals, which have stronger metallic bonds. Therefore, option C is the correct answer.
To know more about electron density, refer here:
https://brainly.com/question/30831350#
#SPJ4
read each question carefully. write your response in the space provided for each part of each question. answers must be written out in paragraph form. outlines, bulleted lists, or diagrams alone are not acceptable and will not be scored. researchers tested the effect of light on the rate of photosynthesis by a species of shrub growing under conditions that differ widely in the amount of available light but where the availability of water and soil nutrients is fairly constant. under constant temperature, relative humidity, and leaf surface area, the researchers used increasing illumination (measured as photosynthetic photon flux density, the number of photons of wavelengths between 400 and 700 nanometers per unit surface area and unit time) and determined the net photosynthesis (measured by the amount of carbon dioxide fixed per unit surface area and unit time at each illumination) of the shrubs growing in full sun, partial sun, or in shade (table 1).
The researchers conducted an experiment to investigate the effect of light on the rate of photosynthesis in a species of shrub. They specifically focused on the impact of varying levels of available light while keeping the conditions of water availability and soil nutrients constant. The experiment maintained a consistent temperature, relative humidity, and leaf surface area throughout.
To measure the effect of light, the researchers used increasing illumination, quantified as photosynthetic photon flux density. This measure represents the number of photons within the wavelength range of 400 to 700 nanometers per unit surface area and unit time. By manipulating the illumination levels, the researchers created different light conditions for the shrubs, including full sun, partial sun, and shade.
The researchers then measured the net photosynthesis of the shrubs under each illumination condition. Net photosynthesis was assessed by quantifying the amount of carbon dioxide fixed per unit surface area and unit time at each level of illumination.
The experiment aimed to determine how the rate of photosynthesis in the shrubs is influenced by varying light conditions. By subjecting the shrubs to different levels of illumination, ranging from full sun to partial sun and shade, the researchers could assess how the availability of light affects the process of photosynthesis.
To measure the effect, the researchers utilized photosynthetic photon flux density, which is a standardized measure of light intensity within the photosynthetically active range. This measure allowed them to precisely control and quantify the illumination levels experienced by the shrubs.
To assess the rate of photosynthesis, the researchers focused on net photosynthesis, which represents the amount of carbon dioxide that is fixed (converted to organic compounds) per unit surface area and unit time. This measurement provides insights into the productivity and efficiency of the shrubs' photosynthetic process under different light conditions.
By conducting this experiment and analyzing the data obtained, the researchers were able to explore the relationship between light availability and the rate of photosynthesis in the studied shrub species. The results of the experiment will contribute to our understanding of how light influences plant growth, productivity, and adaptation strategies. Additionally, the findings can have implications for agricultural practices, forestry, and ecological studies where light availability plays a crucial role in plant performance and ecosystem dynamics.
To know more about photosynthesis, visit :
https://brainly.com/question/29764662
#SPJ11
Which of the following statements are correct regarding preservation of the earth's magnetic field signature within magnetite crystals contained in a basalt flow erupted and solidified at the earth's Equator today?
1. The magnetite crystals will possess a reversed (south) polarity
2. The magnetite crystals will possess a normal (north) polarity
3. the magnetite crystals will have a steep inclination
4. The magnetite crystals will have a low inclination
5. Magnetite crystals will be arranged haphazardly within the crystallized basalt flow
The magnetite crystals will possess a normal (north) polarity.
Option 2 is correct.
This is because the earth's magnetic field has a predominantly north polarity at the equator, so magnetite crystals formed there would align with that polarity.
1. The magnetite crystals will possess a reversed (south) polarity is incorrect because this would only occur during times of magnetic field reversal, which has not occurred in the past few hundred thousand years.
3. The magnetite crystals will have a steep inclination and 4. The magnetite crystals will have a low inclination are also incorrect because the inclination of the magnetite crystals would depend on the latitude at which they were formed, not just the fact that they were formed at the equator.
5. Magnetite crystals will be arranged haphazardly within the crystallized basalt flow is also incorrect because magnetite crystals would align with the earth's magnetic field while they are forming, so they would have a certain orientation within the basalt flow.
Your answer: The correct statements regarding the preservation of the earth's magnetic field signature within magnetite crystals contained in a basalt flow erupted and solidified at the earth's Equator today are:
2. The magnetite crystals will possess a normal (north) polarity, as the current magnetic field is in the normal polarity state.
To know more about magnetite crystals visit:-
https://brainly.com/question/32153998
#SPJ11
.Find the fundamental frequency and the frequency of the first three overtones of the pipe 60.0cm long, if the pipe is open at both ends.
Ffund,Fov1,Fov2,Fov3=______Hz
Find the funaemental freuency and the frequency of the first three overtones of the pipe 60.0cm long, if the pipe is closed at one end.
Ffund,Fov1,Fov2,Fov3=________Hz
If the pipe is open at both ends, what is the number of the highest harmonic that may be heard by a person who can hear frequencies from 20.0Hz to 2.00x10^4Hz?
n=____
If the pipe is closed at one end, what is the number of the highest harmonic that may be heard by a person who can hear frequencies from 20.0Hz to 2.00x10^4Hz?
n=____
For a pipe 60.0 cm long, open at both ends: Fₐₒᵥ₁ = 282.8 Hz, Fₐₒᵥ₂ = 848.4 Hz, Fₐₒᵥ₃ = 1414 Hz. For a pipe closed at one end: Fᶜₗₒ₁ = 94.3 Hz, Fᶜₗₒ₂ = 282.8 Hz, Fᶜₗₒ₃ = 471.4 Hz.
Determine what are the fundamental frequency?Fundamental frequency and the frequency of the first three overtones of a pipe 60.0 cm long, open at both ends:
Fₐₒᵥ₁, Fₐₒᵥ₂, Fₐₒᵥ₃ = 282.8 Hz, 848.4 Hz, 1414 Hz
Fundamental frequency and the frequency of the first three overtones of a pipe 60.0 cm long, closed at one end:
Fᶜₗₒ₁, Fᶜₗₒ₂, Fᶜₗₒ₃ = 94.3 Hz, 282.8 Hz, 471.4 Hz
Number of the highest harmonic that may be heard by a person who can hear frequencies from 20.0 Hz to 2.00x10⁴ Hz in a pipe open at both ends:
n = 99
Number of the highest harmonic that may be heard by a person who can hear frequencies from 20.0 Hz to 2.00x10⁴ Hz in a pipe closed at one end:
n = 198
For a pipe open at both ends, the fundamental frequency (Fₐₒᵥ₁) can be calculated using the formula Fₐₒᵥ₁ = v / 2L, where v is the speed of sound and L is the length of the pipe. In this case, the length of the pipe is 60.0 cm (or 0.60 m).
Using the known speed of sound (approximately 343 m/s), we can substitute these values into the formula to find Fₐₒᵥ₁ = 343 / (2 * 0.60) = 282.8 Hz.
The frequencies of the first three overtones can be calculated by multiplying the fundamental frequency by the harmonic number (1, 2, 3). Therefore, Fₐₒᵥ₂ = 2 * Fₐₒᵥ₁ = 2 * 282.8 Hz = 565.6 Hz, and Fₐₒᵥ₃ = 3 * Fₐₒᵥ₁ = 3 * 282.8 Hz = 848.4 Hz.
For a pipe closed at one end, the fundamental frequency (Fᶜₗₒ₁) can be calculated using the formula Fᶜₗₒ₁ = v / 4L, where v is the speed of sound and L is the length of the pipe. Substituting the values, we find Fᶜₗₒ₁ = 343 / (4 * 0.60) = 94.3 Hz.
The frequencies of the first three overtones for a closed pipe can be calculated using the formula Fᶜₗₒₙ = (2n - 1) * Fᶜₗₒ₁, where n is the harmonic number. Thus, Fᶜₗₒ₂ = (2 * 2 - 1) * Fᶜₗₒ₁ = 3 * 94.3 Hz = 282.8 Hz, and Fᶜₗₒ₃ = (2 * 3 - 1) * Fᶜₗₒ₁ = 5 * 94.3 Hz = 471.4 Hz.
To know more about speed of sound, refer here:
https://brainly.com/question/16485934#
#SPJ4
A solid sphere of weight 36.0 N
rolls up an incline at an angle of 30.0O At the bottom of the incline the center of mass of the sphere has a translational speed of 4.90 m/s. (a) What is the kinetic energy of the sphere at the bottom of the incline? (b) How far does the sphere travel up along the incline? (c) Does the answer to (b) depend on the sphere's mass?
Kinetic energy is 1/2 mv2. The kinetic energy of the sphere at the bottom of the incline is 61.7 J and velocity.
Thus, An object's kinetic energy is the kind of power it has as a result of motion. It is described as the effort required to move a mass-determined body from rest to the indicated velocity.
The body holds onto the kinetic energy it acquired during its acceleration until its speed changes. The body exerts the same amount of effort when slowing down from its current pace to a condition of rest.
Formally, kinetic energy is the second term in a Taylor expansion of a particle's relativistic energy and any term in a system's Lagrangian that includes a derivative with respect to time.
Thus, Kinetic energy is 1/2 mv2. The kinetic energy of the sphere at the bottom of the incline is 61.7 J and velocity.
Learn more about Kinetic energy, refer to the link:
https://brainly.com/question/999862
#SPJ1
a car is negotiating a flat circular curve of radius 50m with a speed of 20m/s. what is the centripetal accelaration of the car?
The centripetal acceleration of an object moving in a circular path is given by the formula:
Centripetal acceleration (a) = (v^2) / r,
where v is the velocity of the object and r is the radius of the circular path.
In this case, the velocity of the car is given as 20 m/s and the radius of the circular curve is 50 m.
Using the formula, we can calculate the centripetal acceleration:
a = (20^2) / 50.
Simplifying the expression, we have:
a = 400 / 50.
Calculating this expression, we find:
a = 8 m/s^2.
Therefore, the centripetal acceleration of the car is 8 m/s^2.
Learn more about centripetal acceleration here:
https://brainly.com/question/29359850
#SPJ11
A soap bubble has an index of refraction of 1.33. What minimum thickness of this bubble will ensure the maximum reflection of normal incident 530 nm wavelength light? What color deviates the most when shining a white light through a prism?
To ensure maximum reflection of normal incident light, we need to consider the conditions for constructive interference in a thin film. For the condition for constructive interference is given by:
2t = mλ/n
2t = m * (530 × 10^-9 m) / 1.33
where t is the thickness of the film, λ is the wavelength of the incident light, n is the refractive index of the film, and m is an integer representing the order of the interference.
In this case, we want the maximum reflection of light with a wavelength of 530 nm (or 530 × 10^-9 m) and a refractive index of 1.33.
Plugging these values into the equation, we have:
2t = m * (530 × 10^-9 m) / 1.33
To ensure maximum reflection, we want the minimum thickness, which occurs when m = 0 (zeroth order).
2t = 0 * (530 × 10^-9 m) / 1.33
t = 0
Therefore, the minimum thickness of the soap bubble that ensures maximum reflection of 530 nm light is zero. This means that any thickness of the bubble will result in some degree of reflection.
When shining white light through a prism, the color that deviates the most is violet. This is because violet light has the shortest wavelength among the visible light spectrum, and it experiences the greatest change in direction (deviation) when passing through the prism due to its higher refractive index compared to other colors.
Learn more about constructive here
https://brainly.com/question/23202500
#SPJ11
Coherent light with wavelength 500 nm passes through two narrow slits separated by 0.340 mm. At a distance from the slits large compared to their separation, what is the phase difference (in radians) in the light from the two slits at an angle of 23.0
To calculate the phase difference in the light from the two slits, we can use the formula:
Δϕ = (2π / λ) * d * sin(θ)
λ = 500 nm = 500 × 10^(-9) m
d = 0.340 mm = 0.340 × 10^(-3) m
θ = 23.0 degrees = 23.0 × (π / 180) radians
Where:
Δϕ is the phase difference
λ is the wavelength of the light
d is the separation between the slits
θ is the angle at which we are observing the interference pattern
Given:
λ = 500 nm = 500 × 10^(-9) m
d = 0.340 mm = 0.340 × 10^(-3) m
θ = 23.0 degrees = 23.0 × (π / 180) radians
Substituting these values into the formula:
Δϕ = (2π / (500 × 10^(-9) m)) * (0.340 × 10^(-3) m) * sin(23.0 × (π / 180) radians)
Δϕ ≈ 0.161 radians
Therefore, the phase difference in the light from the two slits at an angle of 23.0 degrees is approximately 0.161 radians.
Learn more about light here
https://brainly.com/question/10728818
#SPJ11
A grinding wheel is initially at rest. A constant external torque of 50.0 m N is applied to the wheel for 20.0 s, giving the wheel an angular speed of 600 rpm. The external torque is then removed, and the wheel comes to rest 120 s later.
(a) Find the moment of inertia I of the wheel.
(b) Determine the frictional torque, which is assumed to be constant.
(c) Calculate the maximum instantaneous power provided by the frictional torque and compare to the average power provided by friction during the time when the wheel slows to rest. Hint: in part (a), both the external torque and frictional torque (opposing the angular velocity) are acting on the wheel.
(a) To find the moment of inertia (I) of the wheel, we can use the equation relating torque (τ), angular acceleration (α), and moment of inertia (I):
τ = I * α.
In the given scenario, an external torque of 50.0 mN is applied to the wheel for 20.0 s, resulting in an angular speed of 600 rpm.
First, let's convert the angular speed to radians per second:
Angular speed = 600 rpm = 600 * (2π rad/1 min) * (1 min/60 s) = 20π rad/s.
Since the wheel is initially at rest, the angular acceleration (α) is the change in angular speed divided by the time:
α = (20π rad/s - 0 rad/s) / 20.0 s = π rad/s^2.
Using the formula τ = I * α, we can rearrange it to solve for the moment of inertia:
I = τ / α = (50.0 mN) / (π rad/s^2) = 50.0 * 10^(-3) Nm / π rad/s^2.
Calculating this expression, we find:
I ≈ 15.92 * 10^(-3) Nms^2.
Therefore, the moment of inertia of the wheel is approximately 15.92 * 10^(-3) Nms^2.
(b) The frictional torque opposing the angular velocity can be determined by subtracting the external torque from the net torque. Since the wheel comes to rest 120 s later, we can assume that the net torque opposing the angular velocity is constant during this time.
Net torque = 0 (when the wheel comes to rest).
Frictional torque = Net torque - External torque = 0 - 50.0 mN = -50.0 mN.
Therefore, the frictional torque is -50.0 mN.
(c) The maximum instantaneous power provided by the frictional torque can be calculated using the equation:
Power = Frictional torque * Angular speed.
Substituting the given values, we have:
Power = (-50.0 mN) * (20π rad/s).\
Calculating this expression, we find:
Power ≈ -31.42 π mW.
The negative sign indicates that the power is being dissipated by the frictional torque.
To compare this with the average power provided by friction during the time when the wheel slows to rest, we need additional information about the duration and behavior of the frictional torque during that time. Without this information, we cannot calculate the average power.
Therefore, the maximum instantaneous power provided by the frictional torque is approximately -31.42π mW.
Hence, the moment of inertia of the wheel is approximately 15.92 * 10^(-3) Nms^2, the frictional torque is -50.0 mN, and the maximum instantaneous power provided by the frictional torque is approximately -31.42π mW.
Learn more about external torque here:
https://brainly.com/question/29980535
#SPJ11