You are working a crime scene and discover a weapon. How do you pick up the weapon so you do not disturb
any latent fingerprints?
Answer:
you pick it up with gloves and make minimal contact with it
30 POINTS PLEASE TELL ME HOW TO SOLVE THIS!!
If you have 3.4grams of carbon how many
moles of carbon would you have?
Answer:
3 moles of carbon atoms is equivalent to 36 gm carbon.
In 12gm carbon there are 6.023*10^23 atoms.
So in 36 gm there are 3*6.023*10^23 atoms.
so the answer is 18.069*10^23 atoms.
Explanation:
Explanation:
moles = mass in gm/ molar mass =3.4/12= 17/60
plz mark my answer as brainlist plzzzz.
hope this will be helpful to you ☺️.
A student dissolves 8.00 g of NH4NO3(s) in 100. g of H2O(l) in a coffee-cup calorimeter. Based on the initial and final temperatures of the mixture in degrees Celsius shown in the diagram above the laboratory setup, what is the calculated ΔT of the water reported to the appropriate number of significant figures?
What type of cell in the human body grows but does not undergo mitosis?
Answer:Skeletal muscle can undergo hypertrophy, as each cell gets bigger.
Explanation:
Answer:
Sperm cells and egg cells don't go through mitosis.
Explanation:
When a firecracker explodes, stored chemical energy turns into sound and light energy. What other type of energy is also released during this transformation?
PLEASE ASAP
Determine the mass, in grams, for 1.20e24 molecules of H₂
Answer:
3.98g
Explanation:
Given parameters:
Number of molecules = 1.2 x 10²⁴ molecules
Unknown:
Mass of H₂ = ?
Solution:
To find the mass of this molecule, we use the expression below:
Mass = number of moles x molar mass
Molar mass of H₂ = 2(1) = 2g/mol
6.02 x 10²³ molecules are contained in 1 mole of a substance
So; 1.2 x 10²⁴ molecules will have [tex]\frac{1.2 x 10^{24} }{6.02 x 10^{23} }[/tex] = 1.99 moles of H₂
Mass of H₂ = 1.99 x 2 = 3.98g
what are the characteristics of temperature
A Temperature is a unit used to represent hotness or coolness on any of a number of scales, including Fahrenheit and Celsius. The direction that heat energy will spontaneously flow depends on temperature. It measures the average kinetic energy of the substances also.
The average kinetic energy of the particles in an object is measured by its temperature. The velocity of these particles likewise increases as the temperature rises. A thermometer or a calorimeter is used to determine the temperature.
Our weather is made up of several various elements, including temperature, cloudiness, wind speed, and the quantity and type of moisture in the air.
Thus temperature determines the weather and kinetic energy.
To know more about temperature, visit;
https://brainly.com/question/23411503
#SPJ6
Calculate the molecular formula of a compound with the empirical formula CH O and a molar mass of 150 g/mol.
A) C2H4O2
B) C3H6O3
C) C4H8O4
D) C5H10O5
E) C6H12O6
The molecular formula : D) C₅H₁₀O₅
Further explanationGiven
The empirical formula CH₂O
The molar mass of 150 g/mol
Required
The molecular formula
Solution
The empirical formula is the smallest comparison of atoms of compound forming elements.
A molecular formula is a formula that shows the number of atomic elements that make up a compound.
(empirical formula) n = molecular formula
(CH₂O)n = 150 g/mol
(12+2.1+16)n = 150
(30)n = 150
n = 5
why is digital better then analog music
Once a digital recording is made, the bandwidth is set in place. An analog recording is considered unlimited. Therefore, it can move to a higher and higher resolution without losing its original quality.
1.State the relationship between the following properties:
a) mass and number of moles__________
b) number of moles and number of particles __________
6. Show how you will compute for the number of particles given the following:
a) Mass of the sample__________
b) Number of moles of the sample__________
Thankyouu po sana my mag answer
Answer:
bytbyufvguv vvg uggy yvgu vgu gyu7yng8ugng88yn
Why is it important to know the temperature of the water when dealing with ions in
an aqueous solution?
Water does not ionize at higher temperatures.
Water becomes very acidic when at low temperatures.
Temperature affects the concentration of water.
The ionization constant of water is usually given at 25 °C.
Water at a higher temperature will produce more ions than water at a lower temperature.
Answer:
temperature affects the concentration of water
What forms the individual characteristics on a bullet?
Answer:
On bullets, the class characteristics are the rifling specifications of the barrel from which the bullet was fired. ... In a barrel, the individual characteristics are produced by the random imperfections and irregularities of the tool or tools used to produce the lands and grooves, and by use, corrosion, or damage.
Explanation:
Use the following equation to answer the question below. How many moles of iron are made from 8.25 moles of Fe2O3?(see pic for equation)
The original phase and final phase of a substance are shown. Phase Transition Original Phase Final Phase Solid Liquid What most likely happened during the phase transition?
Answer:
The question appears to speak to the process between Liquid and Solid phases of a substance and seeks to resolve what happened in between.
The short answer is that the solid melted.
Explanation:
Melting is the process of a solid becoming fluid. When the reverse happens, (that is a liquid being solid), is called solidification. There is a temperature at which substances take their liquid form. That temperature is called the melting point. The melting point of ice (that is the temperature at which it starts to turn back to water) for instance is 32 °F.
According to the mechanics of melting, the internal energy of the solid increases, because of exposure to heat and or pressure usually through the application of heat or pressure, which increases the substance's temperature to the melting point.
Cheers
Answer:
Explanation:
the other guy who answered must be retded cause melting isnt even a choice.
Correct Option the substance froze.
PLEASE HELP ITS A MAJOR GRADE AND TODAY IS THE DEAD LINE
Answer: WAIT WHAT- YOU SHOULD BE MY FRIEND BTW SNAP IS kpurdham5
Explanation: ♂️
23.When an atom absorbs energy
a.One or more electrons will move to a higher energy orbit
b.One or more electrons will move to a lower energy orbit
c.Colored light is produced
d.There is an explosion
Answer:
a.One or more electrons will move to a higher energy orbit
Explanation:
Absorbing energy means that the electron gets excited and jumps to a higher level.
14. The chemical reaction shows the
production of sulfur trioxide.
2502 (9)+ O2 (g) 2503 (9)
Which of the following reactant
quantities would make oxygen gas
the limiting reagent?
Answer:
Explanation:
Production of sulfur trioxide is O2 CO2
1. What is the mass of zinc in your penny?
Answer:
97.5%
Explanation:
the US mint specifies pennies as 2.5% copper in 97.5% zinc
which cycle results in death of the host cell
A.lytic cycle
B.lysogenic cycle
C.both
Answer:
A. lytic cycle is the correct answer
what elements can calcium nitrate be decomposed into
Answer:
when heated to incandescence, calcium nitrate decomp into /nitrogen oxide, calcium oxide and oxygen/
Explanation:
Answer:
Explanation:
Do you mean what elements is Ca(NO3)2 made from? I think that's what you mean. Every mol of Ca(NO3) contains
Ca = 1 mol
N = 2 mols
O6 = six moles of oxygen
_N2 + _H2 = _NH3
Will there be any leftover reactants left?
(Kinda urgent)
Answer:
This reaction is the synthesis of Ammonia using Nitrogen and Hydrogen gas.
N+H→NH3
We must remember that Nitrogen and Hydrogen are both diatomic molecules in their standard gas form. This adjusts the equation to
N2+H2→NH3
Now we need to adjust coefficients in order to balance the atoms on each side of the equation. Currently, we have 2 atoms of nitrogen and 2 atoms of hydrogen on the reactant side and 1 atom of nitrogen and 3 atoms of hydrogen on the product side.
We can balance the hydrogens by placing a coefficient of 2 in front of ammonia and a coefficient of 3 in front of the hydrogen.
N2+3H2→2NH3
This gives us 6 hydrogen on each side and coincidentally the nitrogens now equal 2 on each side.
Explanation:
I hope this was helpful.
SMARTERTEACHER
Answer:
Balance the equation N2 + H2 ⇒ NH3
Balancing chemical equations is usually easier than it looks
There are 2 Nitrogens and 2 Hydrogens on the left side
There are 1 Nitrogen and 3 Hydrogens on the right side
Hydrogen seems to be the more complicated term so we should start with that
_N2 + _H2 ⇒ _NH3
With 2 H on one side and 3 on the other, our common multiple is 6
To balance the H we need to multiply H2 by 3 and NH3 by 2
_N2 + 3H2 ⇒ 2NH3
Now that we have H balanced, we need to look at N
There are 2 Nitrogens on both sides of the equation, so in this case, it is done
Which of the following atoms has the largest atomic radius and explain why: potassium, gallium, or germanium.
Answer:
Potassium
Explanation:
The atom with the largest atomic radius is potassium from the given list.
The atomic radius is taken as half of the inter-nuclear distance between two covalently bonded atoms of non-metallic elements or half of the distance between nuclei in the solid metal state.
Across a period in the periodic table, atomic radii decreases progressively from left to right.
This is due to the progressive increase in the nuclear charge without an attendant increase in the number of electronic shells.
Answer:
Potassium
Explanation:
An atom's size is defined by the distance from the nucleus to the valence (outer) shell of electrons. Although difficult to to actually measure, due to electrons existing in a probability field with no defined boundaries, it is common knowledge that the more valence shells of an atom, the larger the atom.
Knowing this, lets look at the electron configuration of the elements mentioned:Oxygen = 2,6Sodium = 2,8,1Magnesium = 2,8,2Potassium = 2,8,8,2As we can see, only Potassium has four electron shells, therefore Potassium has the largest atomic size.Alternatively, one can look at a Van der Waal radii table to find that the radii of the four elements are (in picometres):Oxygen = 152 pmSodium = 227 pmMagnesium = 173 pm
Showing once again how Potassium has the largest atomic radius, and therefore the largest atomic size. Interestingly enough, Sodium has a larger atomic radius then magnesium, despite having less electrons and protons.
Write the complementary RNA strand for the following DNA strand. TAC ACC TTG ACG
Answer:
ATG TGG AAC TGC
Explanation:
ATG TGG AAC TGC
The two animals above are similar looking can reproduce. What can be inferred about these two animals
Answer:
What are the two animals?
Explanation:
Although I am in the middle of the 5 stages, I am just as important
as the first and the last. As soon as you see a leaf sprout, you are
sure to be in my stage. Who am I?
This is annoying
Answer: The final stage of the life cycle of a tree is when it has fully grown and reached the ... You should be confident in your supplier's approach to sustainability. ... This is the first occasion you will see a stem and perhaps a couple of leaves. ... The next phase is the sapling stage, this is when the sprout continues to grow and has ...
Explanation:
Calculate the [H⁺] if the [OH⁻] is 1.0 × 10⁻⁵ M.
Answer:
ithink it is 9.0
Explanation:
research ocean currents and how they relate to heat transfer.
Answer:
The movement of this heat through local and global ocean currents affects the regulation of local weather conditions and temperature extremes, stabilization of global climate patterns, cycling of gases
What word is the biotic factor in this sentence:
Fish breath oxygen that is dissolved in water.
Answer: Fish
Explanation:
Biotic factor is one of the component of the ecosystem. It is the living component of the ecosystem. It is affected or influenced by the non-living or abiotic components of the ecosystem like water, air, sunlight, and others. Fish is an example of biotic factor which is dependent on abiotic component that is oxygen which is the chief gas required for the breathing. The oxygen is one of the components of the water. So, the oxygen is dissolved in water and the fish acquire the oxygen through water only.
Write the balanced equation for : potassium chlorite decomposing to potassium chloride and oxygen . (use —> for the arrow)
Answer: 2 KCIO3(s) + heat —> KCI (s) + 3 O2(g)
Explanation:
What is the sequence of coefficients that will balance the following decomposition reaction of dihydrogen monosulfide? H₂S ----> H₂ + S₈
8 S
In this case you must start balancing the sulfur to have 8 on each side of the reaction. So:
Answer:
Explanation:
The law of conservation of matter states that since no atom can be created or destroyed in a chemical reaction, the number of atoms that are present in the reagents has to be equal to the number of atoms present in the products.
Then, you must balance the chemical equation. For that, you must first look at the subscripts next to each atom to find the number of atoms in the equation. If the same atom appears in more than one molecule, you must add its amounts.
The coefficients located in front of each molecule indicate the amount of each molecule for the reaction. This coefficient can be modified to balance the equation, just as you should never alter the subscripts.
By multiplying the coefficient mentioned by the subscript, you get the amount of each element present in the reaction.
Then, taking into account all of the above, you can determine the amount of elements on each side of the equation:
Left side: 2 H and 1 S
Right side: 2 H and 8 S
In this case you must start balancing the sulfur to have 8 on each side of the reaction. So:
8 H₂S → H₂ + S₈
Now the amount of elements on each side of the equation:
Left side: 16 H and 8
Right side: 2 H and 8 S
Now you need to start balancing the hydrogen to get the same amount from each side of the reaction. So:
8 H₂S → 8 H₂ + S₈
Now the amount of elements on each side of the equation:
Left side: 16 H and 8
Right side: 16 H and 8 S
The balanced reaction is:
8 H₂S → 8 H₂ + S₈