Answer:
Concentric circles of contour lines indicate a hilltop; concentric circles with hachure marks indicate a close depression.
Explanation:
Hope this helped Mark BRAINLIEST!!!
What is the change in enthalpy when 180 g of water vapor condenses at 100°C? (AH, = 40.67 kJ/mol)
a. 565 kJ
b. -565 kJ c.
-407 kJ d.
407 kJ
Answer:
[tex]Q=-407kJ[/tex]
Explanation:
Hello there!
In this case, considering that the heat has two forms, sensible (variable temperature) and latent (constant temperature), we can notice that phase changes account for latent heat as the temperature remains the same. In such a way, given the enthalpy of vaporization of water, 40.67 kJ/mol, the enthalpy of condensation (reverse process) is the negative value, -40.67 kJ/mol; therefore, the associated latent heat would be:
[tex]Q=180g*\frac{1mol}{18.02g} *-40.67\frac{kJ}{mol} \\\\Q=-407kJ[/tex]
Best regards!
The answer is
C) -407 kJ d
Calculate a reasonable amount (mass in g) of your unknown acid to use for a titration. You will want about 30 mL of titrant to get to the equivalence point. Assume that your base is about 0.05 M and that your unknown acid has a molar mass around 400 g/mol. (Report your answer using 2 significant figures).
Answer:
"0.60 g" is the appropriate solution.
Explanation:
The given values are:
Volume of base,
= 30 ml
Molarity of base,
= 0.05 m
Molar mass of acid,
= 400 g/mol
As we know,
⇒ [tex]Molarity=\frac{Number \ of \ moles \ of \ base}{Number \ of \ solution}[/tex]
On substituting the values, we get
⇒ [tex]0.05=\frac{Number \ of \ moles \ of \ base}{30\times 10^{-3}}[/tex]
⇒ [tex]Number \ of \ moles \ of \ base=0.05\times 30\times 10^{-3}[/tex]
⇒ [tex]=1.5\times 10^{-3}[/tex]
hence,
⇒ [tex]Moles \ of \ acid=\frac{Mass \ of \ acid}{Molar \ mass \ of \ acid}[/tex]
On substituting the values, we get
⇒ [tex]1.5\times 10^{-3}=\frac{Mass \ of \ acid}{400}[/tex]
⇒ [tex]Mass \ of \ acid=1.5\times 10^{-3}\times 400[/tex]
⇒ [tex]=0.60 \ g[/tex]
For many years chloroform (CHCl3) was used as an inhalation anesthetic in spite of the fact that it is also a toxic substance that may cause severe liver, kidney, and heart damage. Calculate the percent composition by mass of this compound to four significant figures.
Answer:
SEE EXPLANATION
Explanation:
We must first obtain the molar mass of CHCl3 as follows;
CHCl3 = ( 12.01 * 1 )+ (1.008 * 1 ) + ( 35.45 * 3 ) => 119.37 g/mol
Then we obtain the percentage by mass of each element
For Carbon = ( atomic mass C / molar mass CHCl3 ) * 100
C = (12.01 / 119.37 ) * 100
C = ( 0.1006 * 100 )
C = 10.06 %
For Hydrogen :
H = ( atomic mass H / molar mass CHCl3 ) * 100
H = ( 1.008 / 119.37 ) * 100
H = 0.008444 * 100
H = 0.8444 %
For Chlorine :
Cl ( molar mass Cl3 / molar mass CHCl3 ):
Cl = ( 3 * 35.5 / 119.37 ) * 100
Cl = ( 106.5 / 119.37 ) * 100
Cl = 0.8921 * 100
Cl = 89.92%
pls help me with this question thank you
By examining data from distant stars, astronomers can determine
if a star is moving away from or toward Earth. Which of the
following pieces of data would be most helpful in determining
the motion of a star?
A The star gives off blue-white light.
B
The star gives off mainly radio waves and X-rays.
C
The light spectrum given off by the star is shifted toward the
red end.
.
D
The surface temperature of the star is approximately 10,000°
Celsius.
Answer:
The answer is A ahahahha
Explanation:
Because it just is
how to calculate relative abundance of copper isotopes
Answer: Atomic mass (Cu) = (x)(63.0 amu) + (1 – x)(65.0 amu) = 63.5 amu 63.0x + 65 – 65.0x = 63.5 –2x = –1.5 x = 0.75 The percent abundance of each isotope is 75.0 % (Cu-63) and 25.0 % (Cu-65).
Explanation: As you know, the average atomic mass of an element is determined by taking the weighted average of the atomic masses of its naturally occurring isotopes.
Simply put, an element's naturally occurring isotopes will contribute to the average atomic mass of the element proportionally to their abundance.
The energy of flowing electrons
A. A. LightLightB. B. ChemicalChemicalC. C. ElectricalElectricalD. D. TransformationTransformationE. E. MechanicalMechanical
Answer:
C. ElectricalElectrical
Explanation:
( it might be wrong pls dont report me just let me kno y its wrong )
A 0.6467-g portion of manganese dioxide was added to an acidic solution in which 1.1701 g of a chloride-containing sample was dissolved. Evolution of chlorine took place as a consequence of the following reaction: After the reaction was complete, the excess was collected by filtration, washed, and weighed, and 0.3104 g was recovered. Express the results of this analysis in terms of percent aluminum chloride.
Answer:
29.39% of AlCl₃ in the sample
Explanation:
Based on the reaction:
MnO₂(s) + 2Cl⁻ + 4H⁺ → Mn²⁺ + Cl₂(g) + 2H₂O
We can find the amount of chloride in solution with the amount of MnO₂ that reacted as follows:
Initial mass MnO₂ = 0.6467g
Recovered mass = 0.3104g
Mass that reacted = 0.6467g - 0.3104g = 0.3363g
Moles MnO₂ -Molar mass: 86.9368g/mol-:
0.3363g * (1mol / 86.9368g) = 3.868x10⁻³ moles MnO₂
Moles Cl⁻:
3.868x10⁻³ moles MnO₂ * (2mol Cl⁻ / 1mol MnO₂) = 7.737x10⁻³ moles Cl⁻
Moles of AlCl₃ and mass -Molar mass AlCl₃: 133.34g/mol-:
7.737x10⁻³ moles Cl⁻ * (1mol AlCl₃ / 3mol Cl⁻) = 2.579x10⁻³ moles AlCl₃
2.579x10⁻³ moles AlCl₃ * (133.34g / mol) =
0.3439g of AlCl₃ are present in the sample.
The percent is:
0.3439g of AlCl₃ / 1.1701g * 100 =
29.39% of AlCl₃ in the sampleA double-replacement reaction takes place when aqueous Na,co, reacts with aqueous Sn(NO3), according to the following equation. Na,co, + Sn(NO,)
You would expect one of the products of this reaction to be
20
Sn2(CO3)2
NaNO,
O Nas
OCNO,
Answer:
[tex]Sn(CO_3)_2[/tex] and [tex]NaNO_3[/tex].
Explanation:
Hello there!
In this case, according to the described chemical reaction between sodium carbonate and tin nitrate, we can write the undergoing chemical reaction:
[tex]2Na_2CO_3+Sn(NO_3)_4\rightarrow Sn(CO_3)_2+4NaNO_3[/tex]
Thus, we notice that the products are strontium carbonate and sodium nitrate, whose formulas are [tex]Sn(CO_3)_2[/tex] and [tex]NaNO_3[/tex] respectively.
Best regards!
Silicon is a key component of electronic devices. This element is a(n)__, a type of element also called a(n)__.
Answer:
Metalloid ; semiconductor
Explanation:
Which fossil fuel was formed from the bodies of prehistoric animals and plants?
Answer:
coal
Explanation:
Bryan is doing a science experiment on the stomata of plants. Bryan has a tomato plant. He uses wax to cover all the stomata on the leaves of the plant. After five days, Bryan observes that the plant is wilting. What is the best explanation for Bryan’s observation?
A. The plant released too much water into the air B. The plant was unable to carry out transpiration. C. Condensation could not occur on the leaves of the plant.
D. The plant was unable to take in water through its leaves
Answer: The answer is B
The most adequate explanation for the observation done by Bryan would be:
B). The plant was unable to carry out transpiration.
Stomata are characterized as the "tiny pores present in a leaf's epidermis which allows the gas or water vapor to pass."In the given experiment, Bryan has covered these pores which will prevent the process of photosynthesis to take place. This will result in the failure of the transpiration process in the plant to take place and its associated processes as well.
Thus, option B is the correct answer.
Learn more about "Experiment" here:
brainly.com/question/11256472
As mentioned in the kinetic molecular theory, what is the main reason that the volume of gas particles can be considered zero?
a)The bonds present in gas particles are stronger than other bonds, pulling atoms in closer to each other, causing a shorter bond length which greatly decreases the volume.
b)When atoms enter the gas phase, they are less affected by gravity, which lowers their mass and in turn, their volume.
c)The real volume of the gas particles is extremely small when compared to the entire volume of their container.
d)Gas particles constantly expand and contract, which constantly alters their volume. When these volumes are averaged, a value of zero is obtained.
Answer:
The real volume of the gas particles is extremely small when compared to the entire volume of their container.
d)Gas particles constantly expand and contract, which constantly alters their volume. When these volumes are averaged, a value of zero is obtained
Explanation:
Help it’s due right now I will give you 15 points or more
Answer:
1. Temperature, the average kinetic energy of particles, indicates how warm something is. Thermal energy, or the overall kinetic energy of the particles, indicates how a substance or material will transmit heat or chill something else.
2. A thermal expansion is a matter to change in volume in response to a change in temperature.
3. Heat is the form of energy that is transferred between systems or objects with different temperatures.
4. Air temperature near or over bodies of water is much different from that over land due to differences in the way water and land heat and cool. Properties that affect water temperature are transparency, ability to circulate, and specific heat.
5. Radiation is the transfer of heat energy through space by electromagnetic radiation.
6. Radiation is natural and found everywhere, it comes from outer space, the air we breathe, and the earth we tread.
7. When a fluid, such as air or a liquid, is heated and then travels away from the source, it carries the thermal energy along. The fluid above a hot surface expands, becomes less dense, and rises.
8. Convection currents in the Earth occur in the mantle
9. The fire's heat causes molecules in the pan to vibrate faster, making it hotter. These vibrating molecules collide with their neighboring molecules, making them also vibrate faster.
10. Since air is a poor conductor, most energy transfer by conduction occurs right near Earth's surface. Conduction directly affects air temperature only a few centimeters into the atmosphere.
- Hope this helps!
why is space cold ???
Because the space is ultimate thermos.
Can you watch the video and help me fill in the blanks ? Thank you
You have to decide to change the temperature at which you run a certain reaction in hope of obtaining more product more quickly. You find that you actually get less of the desired product, although you get to the equilibrium state more quickly. Explain what happened.
Answer:
see explanation
Explanation:
The reaction has a negative rate law; i.e., Rate = - ΔConcentration / ΔTime which is graphically a negative slope for the plot of Rate as a function of reactant concentration. => Rate ∝ f(Reactant Concentration). However, by raising the temperature, an increase the probability of reaction occurs and the formation of more product.
You have a bag of chips at a constant pressure of 1 Atm with a volume of .5 L and a temperature of 10C. The bag is left under the sun for a couple of hours at a temperature of 35 C, what will its new volume be?
Answer:
0.54 L
Explanation:
Given that,
Initial volume, V₁ = 0.5 L
Initial temperature, T₁ = 10°C = 283 K
Final temperature, T₂ = 35 C = 308 K
We need to find the final volume. The relation between the volume and temperature is given by :
[tex]\dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}\\\\V_2=\dfrac{V_1T_2}{T_1}\\\\V_2=\dfrac{0.5\times 308 }{283}\\\\V_2=0.54\ L[/tex]
So, the new volume is 0.54 L.
An arrow is fired at a target on a high wall. How does the energy change between the moment the arrow is fired and
Che moment it hits the target?
O The potential energy and kinetic energy remain the same.
O The potential energy decreases as kinetic energy increases.
O The kinetic energy decreases as potential energy increases.
O The kinetic energy remains at zero, but potential energy increases.
Answer:
C brainliest
Explanation:
An arrow is fired at a target on a high wall. The kinetic energy will decrease as potential energy increase.
Kinetic energy is one of the energies that is related to the motion of the particle and potential energy is one of the energies that is related to the position and height of the particle.
As the arrow in the question will go high to the wall, speed of arrow will keep on decreasing and kinetic energy keeps on decreasing and as height increases potential energy also increases.
We know that As per law of conservation of energy, as kinetic energy decreases potential energy will increase in the same amount.
Therefore, An arrow is fired at a target on a high wall. The kinetic energy will decrease as potential energy increase.
To learn more about law of conservation of energy click:
https://brainly.com/question/29775341
#SPJ7
which method is adopted in the seperation of lead chloride from water
Explanation:
by dissolving the mixture of lead sulphate and lead chloride in water we can separate the two. after dissolving the mixture on water lead sulphate can be obtained as the solid that 's left behind lead chloride can be recovered by evaporating.
Gallium (, ) is a metalloid obtained from its salts during the smelting of ores of other elements, like Zinc. has broad applicability in the electronics industry. It is also used as a safe replacement for mercury in thermometers as it melts at and has a heat of fusion of . What is the entropy change of of gallium in as it melts when placed on a surface at
The given question is incomplete. The complete question is:
Gallium (Ga, 69.723 g/mol) is a metalloid obtained from its salts during the smelting of ores of other elements, like Zinc. has broad applicability in the electronics industry. It is also used as a safe replacement for mercury in thermometers as it melts at 29.8 °C and has a heat of fusion of 5.59 kJ/mol. What is the entropy change of 22 g of gallium in J/K as it melts when placed on a surface at 29.8°C?
Answer: The entropy change of of gallium in as it melts when placed on a surface at is 5.81 J/K
Explanation:
Latent heat of fusion is the amount of heat required to convert 1 mole of solid to liquid at atmospheric pressure.
Amount of heat required to melt 1 mole of Ga = 5.59 kJ
Mass of Ga given = 22 gram
Heat required to melt 69.723 g of Ga = 5.59 kJ
Thus Heat required to melt 22 g of Ga = [tex]\frac{5.59kJ}{69.723}\times 22=1.76kJ[/tex]
Temperature = [tex]29.8^0C=(273+29.8)kJ=302.8kJ[/tex]
Now entropy change = [tex]\frac{\text {heat of fusion}}{\text {temperature in K}}=\frac{1.76kJ}{302.8K}=0.00581kJ/mol=5.81J/K[/tex]
Thus the entropy change of of gallium in as it melts when placed on a surface at [tex]29.8^0C[/tex] is 5.81 J/K
?CH4 → ?C6H6 + ?H2
?C2H6 + ?O2 → ?CO2 + ?H2O
I need to know the number that goes in front of the equations
Answer:
You basically want to balance these equations.
(6)CH4 → (1)C6H6 + (9)H2
(2)C2H6 + (7)O2 → (4)CO2 + (6)H2O
NOTE: DO NOT PUT BRACKETS IN YOUR ANSWER, I HAVE PUT HERE FOR THE ANSWERS INSTEAD OF QUESTION MARKS.
A student investigated whether the number of bees he saw was related to the temperature outside. His results are on the graph below. Explain the relationship between temperature and the number of bees he saw. Use evidence from the graph to support your answer
Answer:
OOH a lot of points! too bad you scammed me :) its what you get i gueess
Explanation:
Answer:
The number of bees increased as the heat increased.
Explanation:
The line is on a steady increase.
Considering change of state descriptions, select the name of the change of state for when energy is absorbed. Group of answer choices sublimation freezing condensation deposition
Answer: Sublimation
Explanation:
Sublimation : It is a process in which a solid directly changes to gaseous phase by providing heat.
Freezing is a process in which a liquid changes into solid phase when allowed to cool.
Condensation is a process in which a gas changes into liquid phase when allowed to cool.
Deposition is a process in which a gas deposits as solid phase when allowed to cool.
Thus change of state where energy is absorbed is sublimation.
What is the source of Earth's magnetic field according to what you have read in chapter 222
Answer:
Scientists know that today the Earth's magnetic field is powered by the solidification of the planet's liquid iron core. The cooling and crystallization of the core stirs up the surrounding liquid iron, creating powerful electric currents that generate a magnetic field stretching far out into space.
What would you do during a zombie apocalypse
A. run and hide
B. fight back
C. save some people
D. raid survivor's homes
E. keep your family alive
Answer:
C
Explanation:
because then you'd be able to make a group to raid, run with you, and save more people.
A moving 10 kilogram object has 20 Joules of kinetic energy. What is its velocity?
4 m/s
2 m/s
10 m/s
200 m/s
For a theoretical yield of 23 g and actual
yield of 13 g, calculate the percent yield for a
chemical reaction.
1. 63.6364
2. 76.4706
3. 71.4286
4. 57.1429
5. 56.5217
6. 40
7. 70
8. 60
9. 52.6316
10. 41.6667
Answer in units of %.
Answer:
5. 56.5217
Explanation:
Calculate percent yield by (actual yield / theoretical yield) times 100
(13/23) x 100 = 56.52173913
All light travels at the same speed.
O True
O False
Answer:
False
Explanation:
It depends on wixh kid of light is it
Example
Sun light difders from lamp light
PLEASE HELP!!!!!!!
Answer:
2nd option
Explanation: