Answer:
An area with the same climate, landscape, plants, and animals.
Characterize EACH of the three given statements as being TRUE or FALSE and then indicate the collective true-false status of the statements using the choices. (1) Water's boiling point is much higher than expected, based on comparison with other substances, because of hydrogen bonding. (2) In the gaseous state, disruptive forces and cohesive forces are of about the same magnitude. (3) As liquid surface area increases, the rate of evaporation of a liquid increases.
Answer:
The correct answer is - 1 and 3 are true.
Explanation:
Hydrogen bonds require a lot of energy to be broken as these bonds are relatively strong intermolecular forces which makes the boiling point of liquid like water very high, as it requires a lot of heat to break the intermolecular bonds holding the water molecules together.
An increase in the surface area of the liquid also increases the rate of evaporation as it takes place among the molecules of the liquid on the surface.
A balloon is filled
with 35.0 L of
helium when the
temperature is
200K. If the tem-
perature rises to
450K, what is the
new volume of the
balloon?
Answer:
78.75L
Explanation:
According to Charle's Law:
V1/T1=V2/T2
35/200=V2/450
V2=(35*450)200
V2=78.75L
Which oficial the following organisms si not an autotroph
A. mushroom
B. grass
C. tree
D. moss
Answer:
A. mushroom
Explanation:
A voltaic cell is constructed in which the anode is a Fe|Fe2 half cell and the cathode is a Cd|Cd2 half cell. The half-cell compartments are connected by a salt bridge. (Use the lowest possible coefficients. Be sure to specify states such as (aq) or (s). If a box is not needed, leave it blank.) The anode reaction is:
Answer: The Anode reaction is [tex]Fe(s)\rightarrow Fe^{2+}(aq)+2e^-[/tex]
Explanation:
Oxidation-reduction reaction or redox reaction is defined as the reaction in which oxidation and reduction reactions occur simultaneously.
Oxidation reaction is defined as the reaction in which a substance looses its electrons.Oxidation occurs at anode.
Anode : [tex]Fe(s)\rightarrow Fe^{2+}(aq)+2e^-[/tex]
Reduction reaction is defined as the reaction in which a substance gains electrons. Reduction occurs at cathode.
Cathode : [tex]Cd^{2+}(aq)+2e^-\rightarrow Cd(s)[/tex]
The Earth's asthenosphere is a structural layer
A.
that is made of the crust and the uppermost part of the mantle.
B.
that is contained completely within the crust.
C.
that is contained completely within the upper mantle.
D.
that is made of the mantle and the uppermost part of the crust.
Answer:
Dont completly trust me here but i think its a but id try and wait for someone else just be careful
Explanation:
5 ways light changes objects
Why isn't salt water safe for humans to drink?
O A. Salt water has too many water molecules and too few salt molecules.
B. Salt water has too few water molecules and too many salt molecules.
O
C. Salt water contains molecules that are poisonous to humans.
O
D. Salt water contains molecules that are too large for humans to process.
Answer:
B. Salt water has too few water molecules and too many salt molecules
Explanation:
Seawater is toxic to humans because your body is unable to get rid of the salt that comes from seawater. Your body normally gets rid of excess salt by having the kidneys produce urine, but it needs freshwater to dilute the salt in your body for the kidneys to work properly.
True or false. Law of action/reaction: for every action there is an equal and the same reaction. Pls don’t give me a link and tell me the answe
1. If I have 5 moles of a gas at a pressure of 7.6 atm and a volume of 12 liters, what is the temperature?
Answer:
221.22K or -51°C
Explanation:
We will be using the Ideal Gas Law to calculate the temperature of the gas. It is a mathematical relationship that describes the behavior of ideal gas ample for any combo of varying pressure, volume, temperature, and # of moles (n). It is derived by combing Boyle's Law, Charles' Law, Gay-Lussac's & Avogadro's Law.
Note: As always, remember that temperature must be in Kelvin not Celsius when using this equation.
Ideal Gas Law: [tex]PV = nRT[/tex], where P = pressure, V = volume (in Liters), n = # of moles, R = the ideal gas constant, and T = temperature (in Kelvin).
Based on the problem, we are given the pressure, volume, and # of moles. We are asked to find the temperature. What about R you ask? Well, R is a constant that is the value of 1 mole of gas at STP. R has various values depending on the pressure units. In this case, our pressure is in atm so the R value = 0.0821.
Onto the math - all that needs to be done now is to plug and chug. Plug in the given values to find the temperature:
Set up: [tex](7.6 atm)(12L) = (5 mol)(0.0821 L*atm/(mol*K))(T)[/tex]
==> [tex]T = \frac{(7.6 atm)(12L)}{(5 mol)(0.0821 L*atm/(mol*K))}[/tex]
==> T = 221.17K
The answer is 221.17K. To convert into Celsius, subtract by 273.15 to get -50.99 or -51°C.
A student in the lab accidentally poured 45 mL of water into a graduated cylinder containing 15 mL of 3.0 M HCL. What is the concentration of the new solution?
Answer:
The correct approach is "1 M".
Explanation:
The given values are:
Volume of HCL,
V₁ = 45 ml
In prepared solution,
V₂ = 15 ml
Concentration,
C₁ = ?
C₂ = 3.0 M
As we know,
⇒ [tex]V_1C_1=V_2C_2[/tex]
or,
⇒ [tex]C_1=\frac{V_2C_2}{V_1}[/tex]
On substituting the values, we get
⇒ [tex]=\frac{15\times 3}{45}[/tex]
⇒ [tex]=\frac{45}{45}[/tex]
⇒ [tex]=1 \ M[/tex]
For any molecule at the surface the resulting surrounding forces equal zero
True
False
????????????????????????????????????????????????????,,
calorimetry and specific heat lab report can someone please write this for me
If anyone still needed help on this, someone wrote out the student table on brainly.com, look up Lab: Calorimetry and Specific Heat.
The page should say something along the lines of please Please i need it Lab: Calorimetry and Specific Heat
This one should help you a lot more. Good luck.
Answer:
If anyone still needed help on this, someone wrote out the student table on brainly.com, look up Lab: Calorimetry and Specific Heat.
The page should say something along the lines of please Please i need it Lab: Calorimetry and Specific Heat
This one should help you a lot more. Good luck.
Explanation:
7. Define the following terms.
a) Stereoselectivity
b) stereospecific
Explanation:
a) Stereoselectivity = The condition of being stereoselective or a measure of the extent to which a reaction is stereoselective is stereoselectivity.
b) stereospecific = The property of a chemical reaction that yields specific stereoisomers as products.
In order for a roller coaster to work, why does the hill the cart climbs need to be higher than the top of the loop?
Answer:
Explanation:
At the highest point of the first and tallest slope, your potential energy is at its most elevated it will at any point be on this ride. As you plunge, your potential energy diminishes until it's totally gone at the lower part of the slope." The more limited the slope the exciting ride climbs, the more prominent its active energy.
Another way of saying is that
A roller ride works utilizing gravity. the underlying slope must be sufficiently high that gravity can create sufficient force to finish the course.
Brainliest?
Pls someone help me with this question pls
Answer:
D
Explanation:
You rub a comb on your hair and then the comb is able to pick up pieces of paper. Explain why this happens
Answer:
This happened because,the comb was charged with static electricity when it was rubbed on your hair.
(¬_¬)ﾉ( ˘ ³˘)♥
What do the symbols in the parentheses indicate
Answer:
(C) the physical state of each reactant and product
Explanation:
Hope this helps
A balloon has a pressure of 3.5atm and a volume of 4.2L. What will the volume of the balloon be if the pressure is increased to 7.0atm? Assume that temperature remains constant. SHOW ALL WORK FOR FULL CREDIT!
The volume of the balloon is 2.1L.
What is volume?Volume is the amount of space the matter occupies. The SI unit of volume is cubic meter.
Using Boyles law equation,
P1V1 = P2V2
Where P1 and V1 are the initial pressure and volume of the gas
P2 and V2 are the final pressure and volume of the gas
Given:
P1 = 3.5atm
V1 = 4.2L
P2 = 7.0atm
V2 = ?
Solve for V2 ,
V2 = P1V1/P2
V2 = (3.5atm x 4.2 L) / (7.0atm)
= 2.1L
Hence, the volume of the balloon is 2.1L.
To learn more about volume here
https://brainly.com/question/22756604
#SPJ2
You are given three liquids, pentane (C5H12), water (H2O), and tetrachloromethane (CCl4), and are told to make solutions.
a. Predict whether you will be able to make a solution with pentane and tetrachloromethane
b. Predict whether you will be able to make a solution with pentane and water, and give your reasoning.
Answer:
A. predict whether you will be able to make a solution with pentane and tetrachloromethane
Explanation:
Sana nakatulong
HELP QUICK!!!!!!
How many valence electrons do the atoms in Group 13 have?
Answer:
The answer is 3 valance electrons.
Explanation:
Hope this helped Mark BRAINLIEST!!!
Answer:
3 valence electrons
Explanation:
The atoms in group 13 have three valence electrons.
How many grams are in 3.0 moles of sodium chloride (NaCl)?
Answer:
175.5
Explanation:
Help meee??
HNO 3 is an example of Select one :
Triprotic Acid
O Diprotic Acid
O Monoprotic Acid
Tetraprotic Acid
Which equation is an example of a redox reaction?
A. Ca(OH)2 + H2SO3 + 2H20 + CaSO3
B. HCI + KOH + KCI + H20
C. 2K+ CaBr +2KBr + Ca
D. BaCl2 + Na2SO4 + 2NaCl + BaSO4
Answer:
The answer is C.
Explanation:
A P E X approved :)
3. What is the mass % of a solution that contains 36g KCl in 475g of water?
Answer:
%KCl = 7.05%
%Water = 92.95%
Explanation:
Step 1: Given data
Mass of KCl (solute): 36 gMass of water (solvent): 475 gStep 2: Calculate the mass of the solution
The mass of the solution is equal to the sum of the masses of the solute and the solvent.
m = 36 g + 475 g = 511 g
Step 3: Calculate the mass percentage of the solution
We will use the following expression.
%Component = mComponent/mSolution × 100%
%KCl = 36 g/511 g × 100% = 7.05%
%Water = 475 g/511 g × 100% = 92.95%
Determine the number of formula units in 48.0 grams of magnesium chloride (MgCl2)
Answer:
3.03 x 10²³ formula units
Explanation:
First we convert 48.0 grams of magnesium chloride into moles, using its molar mass:
48.0 g ÷ 95.21 g/mol = 0.504 mol MgCl₂Then we convert 0.504 moles into formula units, using Avogadro's number:
0.504 mol * 6.023x10²³ formula units/mol = 3.03x10²³ formula unitswhich of the following, when dissolved in water, forms a weak acid.A. HNO3B. HClO4C. HBrD. HClOE. NH3
Answer:
The weak acid is - E. [tex]NH_3[/tex]
Explanation:
Ammonia is a strong base, which in turn make it to be a weak acid.
As, the rest of the options are acid and therefore furnish hydrogen ions when dissolved in water, making them strong acid.
And ammonia dissolves in water to form its conjugate ammonium ion and hydroxide ion, therefore making the solution basic.
Hence, from the given options, the correct option is E. [tex]NH_3[/tex]
The compound which when dissolved in water, forms a weak acid is; Choice E: NH3
According to the question;
we are required to determine which compound forms a weak acid when dissolved in water.Unlike other compounds (HNO3, HClO, HBr, HClO) which dissolve in water to yield H+ ion, Ammonia dissolves in water to form ammonium ion and hydroxide ion, OH-.
In essence, NH3 is a strong base when dissolved in water and consequently, is a weak acid when dissolved in water.
Read more:
https://brainly.com/question/15192126
Pls someone help me with this question pls
Answer:
it c
Explanation:
because it's supposed to be untangled so nothing will happen to it because if it's Tangled bad stuff what happened to it and it will broke
what is the pH if the H+ is 5.7 x 10^-10 M ?
Answer:
9.24
Explanation:
-logofH
One method for preparing a nitrile is the dehydration of a primary amide.
a. True
b. False
A sample of O2 occupies 75 L at 1 atm. If the volume of the
sample doubles, what is the new pressure of Oz?
Answer:
the new pressure of Oz is 0.5 atm
Explanation:
The computation of the new pressure of Oz is shown below:
Given that
Original pressure of O2 (P1) = 1 atm
And, the Original volume of oxygen O2 (V1) = 75L
Now
New pressure of O2 (P2) = ?
And, the New volume of O2 (V2) = 2V1 i.e
= (2 × 75L)
= 150L
Here we applied the Boyle's law formula
P1V1 = P2V2
1 atm × 75L = P2 × 150L
75 atm × L = 150L ×P2
Now Divide both sides by 150L to get P2
75 atm × L ÷ 150L = 150L × P2 ÷ 150L
0.5 atm = P2
Hence, the new pressure of Oz is 0.5 atm