where would you expect to find vesicles of neurotransmitters
A. Synaptic gap
B. postsynaptic dendrites
C. Channels in the postsynaptic
D. Presynaptic terminal button

Answer:b

Explanation:I’m just trynna get more money dude

Answer:

Thus, the energy stored by a 50 Ampere minute battery is found to be  36 KJ.

Explanation:

The power delivered by a battery is given by the formula:

P = VI

where,

P = Power Delivered by battery in 1 second

V = Voltage of battery = 12 volt

I = Current stored in battery

But, if we multiply both sides of equation by time (t), then:

Pt = VIt

where,

Pt = Power x Time = E = Energy Stored = ?

It = Rating of Battery = (50 A.min)(60 sec/min) = 3000 A.sec

Therefore,

E = (12 volt)(3000 A.sec)

E = 36000 J = 36 KJ

Thus, the energy stored by a 50 Ampere minute battery is found to be  36 KJ.

Answer:

t = 5.03 s

Explanation:

To find the time interval when Sheila encounter her brother, you first calculate the angular speed of both Sheila and her brother.

You use the following formula:

[tex]\omega = \frac{v}{r}[/tex]

w: angular speed

v: tangential speed

r: radius of the trajectory = 8 m

For  you have:

[tex]\omega=\frac{4m/s}{8m}=0.5\frac{rad}{s}[/tex]

For her brother:

[tex]\omega'=\frac{6m/s}{8m}=0.75\frac{rad}{s}[/tex]

Next, they will encounter to each other when the angular distance of the Brother of sheila equals the angular distance of Sheila in the opposite direction. This can be written as follow:

[tex]\theta=\omega t\\\\\theta'=\omega ' t[/tex]

They encounter for θ = 2π-θ':

[tex]\omega t=2\pi-\omega' t[/tex]

You replace the values of the parameters in the previous equation and solve for t:

[tex]0.5t=2\pi-0.75t\\\\1.25t=2\pi\\\\t=5.026\approx5.03[/tex]

Hence, Sheila encounter her brother in 5.03 s

Answer:

[tex]B_T=2.0*10^-5[-\hat{i}+\hat{j}]T[/tex]

Explanation:

To find the magnitude of the magnetic field, you use the following formula for the calculation of the magnetic field generated by a current in a wire:

[tex]B=\frac{\mu_oI}{2\pi r}[/tex]

μo: magnetic permeability of vacuum = 4π*10^-7 T/A

I: current = 6.0 A

r: distance to the wire in which magnetic field is measured

In this case, you have four wires at corners of a square of length 9.0cm = 0.09m

You calculate the magnetic field in one corner. Then, you have to sum the contribution of all magnetic field generated by the other three wires, in the other corners. Furthermore, you have to take into account the direction of such magnetic fields. The direction of the magnetic field is given by the right-hand side rule.

If you assume that the magnetic field is measured in the up-right corner of the square, the wire to the left generates a magnetic field (in the corner in which you measure B) with direction upward (+ j), the wire down (down-right) generates a magnetic field with direction to the left (- i)  and the third wire generates a magnetic field with a direction that is 45° over the horizontal in the left direction (you can notice that in the image attached below). The total magnetic field will be:

[tex]B_T=B_1+B_2+B_3\\\\B_{T}=\frac{\mu_o I_1}{2\pi r_1}\hat{j}-\frac{\mu_o I_2}{2\pi r_2}\hat{i}+\frac{\mu_o I_3}{2\pi r_3}[-cos45\hat{i}+sin45\hat{j}][/tex]

I1 = I2 = I3 = 6.0A

r1 = 0.09m

r2 = 0.09m

[tex]r_3=\sqrt{(0.09)^2+(0.09)^2}m=0.127m[/tex]

Then you have:

[tex]B_T=\frac{\mu_o I}{2\pi}[(-\frac{1}{r_2}-\frac{cos45}{r_3})\hat{i}+(\frac{1}{r_1}+\frac{sin45}{r_3})\hat{j}}]\\\\B_T=\frac{(4\pi*10^{-7}T/A)(6.0A)}{2\pi}[(-\frac{1}{0.09m}-\frac{cos45}{0.127m})\hat{i}+(\frac{1}{0.09m}+\frac{sin45}{0.127m})]\\\\B_T=\frac{(4\pi*10^{-7}T/A)(6.0A)}{2\pi}[-16.67\hat{i}+16.67\hat{j}]\\\\B_T=2.0*10^-5[-\hat{i}+\hat{j}]T[/tex]

Complete question is;

Assuming 100% efficient energy conversion how much water stored behind a 50 centimeter high hydroelectric dam would be required to charge the battery with power rating, 12 V, 50 Ampere-minutes.

Answer:

Amount of water required to charge the battery = 7.35 m³

Explanation:

The formula for Potential energy of the water at that height = mgh

Where;

m = mass of the water

g = acceleration due to gravity = 9.8 m/s²

h = height of water = 50 cm = 0.5 m

We know that in density, m = ρV

Where;

ρ = density of water = 1000 kg/m³

V = volume of water

So, potential energy is now given as;

Potential energy = ρVgH = 1000 × V × 9.8 × 0.5 = (4900V) J

Now, formula for energy of the battery is given as;

E = qV

We are given;

q = 50 A.min = 50 × 60 = 3,000 C

V = 12 V

Thus;

qV = 3,000 × 12 = 36,000 J

E = 36,000 J

At a 100% conversion rate, the energy of the water totally powers the battery.

Thus;

(4900V) = (36,000)

4900V = 36,000

V = 36,000/4900

V = 7.35 m³

Answer:

A

Explanation:

Fussion occurs when elements of lower atomic mass combines to form that of a larger atomic mass, releasing energy in the process .

Hydrogen has a lower atomic mass than Helium.

Answer:

SO THAT

Answer:

T = 676 N

Explanation:

Given that: f = 65 Hz, L = 2.0 m, and ρ = 5.0 g[tex]/m^{2}[/tex] = 0.005 kg

A stationary wave that is set up in the string has a frequency of;

f = [tex]\frac{1}{2L}[/tex][tex]\sqrt{\frac{T}{M} }[/tex]

⇒      T = 4[tex]L^{2}[/tex][tex]f^{2}[/tex]M

Where: t is the tension in the wire, L is the length of the wire, f is the frequency of the waves produced by the wire and M is the mass per unit length of the wire.

But M = L × ρ = (2 × 0.005) = 0.01 kg/m

T = 4 × [tex]2^{2}[/tex] ×[tex]65^{2}[/tex] × 0.01

   = 4 × 4 ×4225 × 0.01

   = 676 N

Tension of the wire is 676 N.

Answer:

The  angular displacement  is  [tex]\theta = 29.6 \ rad[/tex]

Explanation:

From the question we are told that

     The initial angular speed is  [tex]w = 5.35 \ rad/s[/tex]

      The angular acceleration is  [tex]\alpha = 0.331 rad /s^2[/tex]

      The time take is  [tex]t = 4.81 \ s[/tex]

Generally the angular displacement is mathematically represented as

          [tex]\theta = w * t + \frac{1}{2} \alpha * t^2[/tex]

substituting values

         [tex]\theta = 5.35 * 4.81 + \frac{1}{2} * 0.331 * (4.81)^2[/tex]

         [tex]\theta = 29.6 \ rad[/tex]

Answer:

Silver.

Explanation:

To determine the identity of the metal, we need to calculate the density of the metal. This is illustrated below:

Mass of metal (m) = 18.15g

Length (L)= 1.2cm

Volume (V) = L³ = 1.2³ = 1.728cm³

Density =.?

The density of a substance is simply defined as the mass of the substance per unit volume of the substance. Mathematically, it is expressed as:

Density = Mass /volume

With the above formula, we can obtain the density of the metal as follow:

Mass = 18.15g

Volume = 1.728cm³

Density =.?

Density = Mass /volume

Density = 18.15g/1.728cm³

Density of the metal = 10.50g/cm³

Comparing the density of metal obtained with the densities given in the table above, we can see that the density of the metal is the same with that of silver.

Therefore, the metal is silver.

Answer:

The terminal velocity is [tex]v_t =17.5 \ m/s[/tex]

Explanation:

From the question we are told that

       The mass of the squirrel is  [tex]m_s = 50\ g = \frac{50}{1000} = 0.05 \ kg[/tex]

      The surface area is   [tex]A_s = 935 cm^2 = \frac{935}{10000} = 0.0935 \ m^2[/tex]

       The height of fall is  h =4.8 m

        The length of the prism is [tex]l = 23.2 = 0.232 \ m[/tex]

          The width of the prism is [tex]w = 11.6 = 0.116 \ m[/tex]

The terminal velocity is mathematically represented as

       [tex]v_t = \sqrt{\frac{2 * m_s * g }{\dho_s * C * A } }[/tex]

Where [tex]\rho[/tex]  is the density of a rectangular prism with a constant values of [tex]\rho = 1.21 \ kg/m^3[/tex]

            [tex]C[/tex] is the drag coefficient for a horizontal skydiver with a value = 1

            A  is the area of the prism the squirrel is assumed to be which is mathematically represented as

      [tex]A = 0.116 * 0.232[/tex]

       [tex]A = 0.026912 \ m^2[/tex]

 substituting values

      [tex]v_t = \sqrt{\frac{2 * 0.510 * 9.8 }{1.21 * 1 * 0.026912 } }[/tex]

     [tex]v_t =17.5 \ m/s[/tex]

Answer:

1A,2D,3B

Explanation:

hope this helps

Answer:

About 2104m/s

Explanation:

[tex]F=ma \\\\F=\dfrac{2660kg}{2}\cdot 1614m/s=2,146,620N \\\\2,146,620N=1,269kg\cdot a \\\\a\approx 1691m/s \\\\v_f=v_o+at=413m/s+1691m/s=2104m/s[/tex]

Hope this helps!

Answer:

1.25 m/s^2

Explanation:

F = m*a ...... force = mass * acceleration

force = 100 N, mass = 80 kg

100 = 80 * a

100/80 = a = 1.25 m/s^2

Answer:

The acceleration is 1.25m/s².

Explanation:

You have to apply Newton's Second Law which is F = m×a where F represents force, m is mass and a is acceleratipn. Then you have to substitute the following values into the formula :

[tex]f = m \times a[/tex]

Let F = 100,

Let m = 80,

[tex]100 = 80 \times a[/tex]

[tex]100 = 80a[/tex]

[tex]a = 100 \div 80[/tex]

[tex]a = 10 \div 8[/tex]

[tex]a = 1.25[/tex]

Answer

The rate at which the magnetic field is changing is  [tex][\frac{dB}{dt} ] = 0.000467 T/s[/tex]

Explanation

From the question we are told that

   The electric field strength is [tex]E = 3.5mV/m = 3.5 *10^{-3} \ V/m[/tex]

    The radius is  [tex]r = 1.5 \ m[/tex]

The rate of change of the  magnetic  field  is mathematically represented as

        [tex]\frac{d \phi }{dt} = \int\limits^{} {E \cdot dl}[/tex]

Where [tex]dl[/tex] is change of a unit length

     [tex]\frac{d \phi}{dt} = A * \frac{dB}{dt}[/tex]

Where A is the area which is mathematically represented as

     [tex]A = \pi r^2[/tex]

    So

    [tex]E \int\limits^{} { dl} = ( \pi r^2) (\frac{dB}{dt} )[/tex]  

  [tex]E L = ( \pi r^2) (\frac{dB}{dt} )[/tex]  

where L is the circumference of the circle which is mathematically represented as

     [tex]L = 2 \pi r[/tex]

So

     [tex]E (2 \pi r ) = (\pi r^2 ) [\frac{dB}{dt} ][/tex]

      [tex]E = \frac{r}{2} [\frac{dB}{dt} ][/tex]

       [tex][\frac{dB}{dt} ] = \frac{E}{ \frac{r}{2} }[/tex]

substituting values

      [tex][\frac{dB}{dt} ] = \frac{3.5 *10^{-3}}{ \frac{15}{2} }[/tex]

      [tex][\frac{dB}{dt} ] = 0.000467 T/s[/tex]    

Answer:

The length of organ pipe A is [tex]L = 0.3611 \ m[/tex]

The length of organ pipe B is  [tex]L_b = 0.2708 \ m[/tex]

Explanation:

From the question we are told that

    The fundamental frequency is  [tex]f = 475 Hz[/tex]

     The speed of sound is  [tex]v_s = 343 \ m/s[/tex]

The fundamental frequency of the organ pipe A  is mathematically represented as

        [tex]f= \frac{v_s}{2 L}[/tex]

Where L is the length of  organ pipe

   Now  making L the subject

        [tex]L = \frac{v_s}{2f}[/tex]

substituting values

        [tex]L = \frac{343}{2 *475}[/tex]

        [tex]L = 0.3611 \ m[/tex]

The second harmonic frequency of the  organ pipe A is mathematically represented as

       [tex]f_2 = \frac{v_2}{L}[/tex]

The third harmonic frequency of the  organ pipe B is mathematically represented as      

      [tex]f_3 = \frac{3 v_s}{4 L_b }[/tex]

So from the question

       [tex]f_2 = f_3[/tex]

So

    [tex]\frac{v_2}{L} = \frac{3 v_s}{4 L_b }[/tex]

Making  [tex]L_b[/tex] the subject

     [tex]L_b = \frac{3}{4} L[/tex]

substituting values

    [tex]L_b = \frac{3}{4} (0.3611)[/tex]

    [tex]L_b = 0.2708 \ m[/tex]

Answer:

a) [tex]E = 6.024\,USD[/tex], For m kilograms, it is 4184m J., 3600000 joules, b) [tex]i = 88.200\,A[/tex]

Explanation:

a) The amount of heat needed to warm water is given by the following expression:

[tex]Q_{needed} = m_{w}\cdot c_{w}\cdot (T_{f}-T_{i})[/tex]

Where:

[tex]m_{w}[/tex] - Mass of water, measured in kilograms.

[tex]c_{w}[/tex] - Specific heat of water, measured in [tex]\frac{J}{kg\cdot ^{\circ}C}[/tex].

[tex]T_{f}[/tex], [tex]T_{i}[/tex] - Initial and final temperatures, measured in [tex]^{\circ}C[/tex].

Then,

[tex]Q_{needed} = (1440\,kg)\cdot \left(4184\,\frac{J}{kg\cdot ^{\circ}C} \right)\cdot (40^{\circ}C - 10^{\circ}C)[/tex]

[tex]Q_{needed} = 180748800\,J[/tex]

The energy needed in kilowatt-hours is:

[tex]Q_{needed} = 180748800\,J\times \left(\frac{1}{3600000}\,\frac{kWh}{J} \right)[/tex]

[tex]Q_{needed} = 50.208\,kWh[/tex]

The electric energy required to heat up the water is:

[tex]E = \frac{50.208\,kWh}{0.75}[/tex]

[tex]E = 66.944\,kWh[/tex]

Lastly, the cost of heating a hot tub is: (USD - US dollars)

[tex]E = (66.944\,kWh)\cdot \left(0.09\,\frac{USD}{kWh} \right)[/tex]

[tex]E = 6.024\,USD[/tex]

The heat needed to raise the temperature a degree of a kilogram of water is 4184 J. For m kilograms, it is 4184m J. Besides, a kilowatt-hour is equal to 3600000 joules.

b) The current required for the electric heater is:

[tex]i = \frac{Q_{needed}}{\eta \cdot \Delta V \cdot \Delta t}[/tex]

[tex]i = \frac{180748800\,J}{0.75\cdot (220\,V)\cdot (3.45\,h)\cdot \left(3600\,\frac{s}{h} \right)}[/tex]

[tex]i = 88.200\,A[/tex]

Answer:

Explanation:

Using the principle of moment to solve the problem. The principle states that the sum of clockwise moments is equal to the sum of anticlockwise moment.

Moment = force *perpendicular distance

Moment of Archimedes about the fulcrum = 75 * x  ... 1

x is the distance of Archimedes from the fulcrum

Moment of Heron about the fulcrum = 150 * 2 = 300kgm... 2

Equation 1 and 2 according to principle of moment to get x we have;

75x = 300

x = 300/75

x = 4metres

Archimedes need to sit 4m from the fulcrum

Answer:

(a) q = 2.357 x 10⁻⁵ C

(b) Φ = 2.66 x 10⁶ N.m²/C

Explanation:

Given;

diameter of the sphere, d = 1.1 m

radius of the sphere, r = 1.1 / 2 = 0.55 m

surface charge density, σ = 6.2 µC/m²

(a)  Net charge on the sphere

q = 4πr²σ

where;

4πr² is surface area of the sphere

q is the net charge on the sphere

σ is the surface charge density

q = 4π(0.55)²(6.2 x 10⁻⁶)

q = 2.357 x 10⁻⁵ C

(b) the total electric flux leaving the surface of the sphere

Φ = q / ε

where;

Φ is the total electric flux leaving the surface of the sphere

ε is the permittivity of free space

Φ = (2.357 x 10⁻⁵) / (8.85 x 10⁻¹²)

Φ = 2.66 x 10⁶ N.m²/C

Complete question is;

Assuming 100% efficient energy conversion how much water stored behind a 50 centimeter high hydroelectric dam would be required to charge the battery with power rating, 12 V, 50 Ampere-minutes

Answer:

Amount of water required to charge the battery = 7.35 m³

Explanation:

The formula for Potential energy of the water at that height = mgh

Where;

m = mass of the water

g = acceleration due to gravity = 9.8 m/s²

H = height of water = 50 cm = 0.5 m

We know that in density, m = ρV

Where;

ρ = density of water = 1000 kg/m³

V = volume of water

So, potential energy is now given as;

Potential energy = ρVgH = 1000 × V × 9.8 × 0.5 = (4900V) J

Now, formula for energy of the battery is given as;

E = qV

We are given;

q = 50 A.min = 50 × 60 = 3,000 C

V = 12 V

Thus;

qV = 3,000 × 12 = 36,000 J

E = 36,000 J

At a 100% conversion rate, the energy of the water totally powers the battery.

Thus;

(4900V) = (36,000)

4900V = 36,000

V = 36,000/4900

V = 7.35 m³

Answer:

v = 19.2 m/s

Explanation:

In order to find the speed of the string you use the following formula:

[tex]f=\frac{v}{2L}[/tex]          (1)

f: frequency of the string = 80.0Hz

v: speed of the wave = ?

L: length of the string = 12.0cm = 0.12m

The length of the string coincides with the wavelength of the wave for the fundamental mode.

Then, you solve for v in the equation (1), and replace the values of the other parameters:

[tex]v=2Lf=2(0.12m)(80.0Hz)=19.2\frac{m}{s}[/tex]

The speed of the wave is 19.2 m/s

Answer:

a. global warming

Explanation:

that's the definitain of global warming

Answer:

A climate

Explanation:

Answer:

Work is done by friction = -165 J

Explanation:

Given:

Mass of block (m) = 15 kg

Ramp inclined = 28°

Friction force (f) = 30 N

Distance (d) = 5.5 m

Find:

Work is done by friction.

Computation:

Work is done by friction = -Fd

Work is done by friction = -(30)(5.5)

Work is done by friction = -165 J

Answer:

a = 1.72 m/s²

Explanation:

The given kinematic equation is the 2nd equation of motion. The equation is as follows:

xf = xi + (Vi)(t) + (1/2)(a)t²

where,

xf = the final position =  5000 m

xi = the initial position = 1000 m

Vi = the initial velocity = 15 m/s

t = the time taken = 60 s

a = acceleration = ?

Therefore,

5000 m = 1000 m + (15 m/s)(60 s) + (1/2)(a)(60 s)²

5000 m = 1000 m + 900 m + a(1800 s²)

5000 m = 1900 m + a(1800 s²)

5000 m - 1900 m = a(1800 s²)

a(1800 s²) = 3100 m

a = 3100 m/1800 s²

a = 1.72 m/s²

Answer:

The final speed of the ball is 9 m/s.

Explanation:

We have,

A steel ball is dropped from a diving platform. It is required to find the velocity of the ball 0.9 seconds after its released. It will move under the action of gravity. Using equation of motion to find it as :

[tex]v=u+at[/tex]

u = 0 (at rest), a = g

[tex]v=gt\\\\v=10\times 0.9\\\\v=9\ m/s[/tex]

So, the final speed of the ball is 9 m/s.

Answer:

x2 = 64 revolutions.

it rotate through 64 revolutions in the next 5.00 s

Explanation:

Given;

wheel rotates from rest with constant angular acceleration.

Initial angular speed v = 0

Time t = 2.50

Distance x = 8 rev

Applying equation of motion;

x = vt +0.5at^2 ........1

Since v = 0

x = 0.5at^2

making a the subject of formula;

a = x/0.5t^2 = 2x/t^2

a = angular acceleration

t = time taken

x = angular distance

Substituting the values;

a = 2(8)/2.5^2

a = 2.56 rev/s^2

velocity at t = 2.50

v1 = a×t = 2.56×2.50 = 6.4 rev/s

Through the next 5 second;

t2 = 5 seconds

a2 = 2.56 rev/s^2

v2 = 6.4 rev/s

From equation 1;

x = vt +0.5at^2

Substituting the values;

x2 = 6.4(5) + 0.5×2.56×5^2

x2 = 64 revolutions.

it rotate through 64 revolutions in the next 5.00 s

Answer:

B. F/2

Explanation:

The radiation force per unit area (radiation pressure Prad) exerted by an electromagnetic wave on a perfectly absorbing body has been found by experiment to be equal to the energy density of the wave

i.e Prad = u

For a reflecting body, this force exerted per unit area has been found to be twice the energy density of the wave.

i.e Prad = 2u.

Therefore, if the force exerted on a perfectly reflective body is F, then the force exerted on a perfectly absorbing body will be F/2

Answer:

B

Explanation:

Because the force has 2 components (horizontal and vertical), the horizontal component must be smaller than the total force. The Pythagorean theorem only adds positive values (because they're squared) so it makes sense. Using trigonometry, 100*cos(-20) yields a horizontal force of around 939.7N, which is less than 1000N.

Answer:

a. 63.89°  in the north-southward manner

b.  2.2 sec

Explanation:

The goose is flying at 100 km/h

Air from east to west is 44 km/h

angle relative to the north-south direction for the bird to travel south will be

cos∅ = 44/100 = 0.44

∅ = [tex]cos^{-1}[/tex]0.44 = 63.89°  in the north-southward manner

Speed south relative to the ground will be v

Tan 63.89 = v/100

2.04 = v/100

v = 2.04 x 100 = 204 km/hr

to cover a distance of 450 m from north to south at this speed time will be

t = d/v = 450/204 = 2.2 sec

Answer:

This example shows that alloys are stronger than either of it's parent materials by themselves.

Explanation:

Since carbon is added to iron to make steel, it means steel is an alloy of iron and carbon.

This is because an alloy is a mixture of two or more elements, where at least one element is a metal.

Now, steel is stronger than either carbon or or iron by itself because Steel contains atoms of other elements including carbon and iron. These atoms have different sizes to iron carbon atoms, so they distort the layers of atoms in the pure iron and carbon. This means that a greater force is required for the layers to slide over each other in steel, so steel is harder than pure iron.