Answer:
a physical change is something that has not been modified chemically and can possibly be changed back to the state it was once before. A physical change keeps all the same atoms and none of them is modified.
Example:
When a block of clay is morphed into a giraffe statue, it can be morphed back to its original state. If someone burnt the block of clay, the atoms would be modified and it would be unable to go back to its previous state.
-----------------------------------------------------------------------------------------------------------------
(If you're referring to a question with these answers)
A. iron rusting
B. milk turning to curd
C. water boiling
D. paper burning
E. hard water staining pipes
-----------------------------------------------------------------------------------------------------------------
Answer:
C. Water Boiling
(If you are referring to a question with these answers I think this is the correct answer if not I do apologize)
-----------------------------------------------------------------------------------------------------------------
Suppose an industrial quality-control chemist analyzes a sample from a copper processing plant in the following way. He adds powdered iron to a copper(II) sulfate sample from the plant until no more copper will precipitate. He then washes, dries, and weighs the precipitate, and finds that it has a mass of . Calculate the original concentration of copper(II) sulfate in the sample. Round your answer to significant digits.
Answer:
Concentration of Copper (II) Sulfate in the original sample in mol/L = 0.0035 M
Concentration of Copper (II) Sulfate in the original sample in g/L = 0.56 g/L
Explanation:
Complete Question
Fe(s) + CuSO₄(aq) → Cu(s) + FeSO₄(aq)
Suppose an industrial quality-control chemist analyzes a sample from a copper processing plant in the following way. He adds powdered iron to a 400.mL copper (II) sulfate sample from the plant until no more copper will precipitate. He then washes, dries, and weighs the precipitate, and finds that it has a mass of 89.mg. Calculate the original concentration of copper(II) sulfate in the sample. Round your answer to 2 significant figures.
Solution
Noting that the precipitate is Copper as it is the only solid by-product of this reaction.
89 mg of Copper is produced from this reaction.
We convert this into number of moles for further stoichiometric calculations
Mass of Copper = 89 mg = 0.089 g
Molar mass of Copper = 63.546 amu
Number of moles of Copper produced from the reaction = (0.089/63.546) = 0.0014005602 = 0.001401 mole
From the stoichiometric balance of the reaction,
1 mole of Copper is produced from 1 mole of Copper (II) Sulfate
0.001401 mole of Copper will be produced similarly from 0.001401 mole of Copper (II) Sulfate.
Number of moles of Copper (II) Sulfate in the original sample = 0.001401 mole
Concentration of Copper (II) Sulfate in the original sample in mol/L = (Number of moles) ÷ (Volume in L)
Number of moles = 0.001401 mole
Volume in L = (400/1000) = 0.4 L
Concentration of Copper (II) Sulfate in the original sample in mol/L = (0.001401/0.4) = 0.0035025 mol/L = 0.0035 mol/L to 2 s.f.
Concentration in g/L = (Concentration in mol/L) × (Molar Mass)
Concentration in mol/L = 0.0035025 M
Molar mass of Copper (II) Sulfate = 159.609 g/mol
Concentration of Copper (II) Sulfate in the original sample in g/L = 0.0035025 × 159.609 = 0.559 g/L = 0.56 g/L to 2 s.f
Hope this Helps!!!!
The concentration of the original copper solution is 0.035 M.
The equation of the reaction is;
Fe(s) + CuSO4(aq) -------> FeSO4(aq) + Cu(s)
Number of moles of copper obtained = 89 × 10^-3g/63.5 = 0.0014 moles
Since the reaction is 1:1, the number of moles of copper sulfate that reacted is c.
From the question, we are told that the volume of solution is 400.mL or 0.04L.
Hence, the concentration of the solution is; number of moles /volume
= 0.0014 moles/0.04L = 0.035 M
Learn more: https://brainly.com/question/9352088
Missing parts;
Suppose an industrial quality-control chemist analyzes a sample from a copper processing plant in the following way. He adds powdered iron to a 400.mL copper (II) sulfate sample from the plant until no more copper will precipitate. He then washes, dries, and weighs the precipitate, and finds that it has a mass of 89.mg. Calculate the original concentration of copper(II) sulfate in the sample. Round your answer to 2 significant figures.
A 950.0 mL solution of potassium permanganate was made by dissolving 45.0 g KMnO4 in 750.0 mL of water. Assume water has a density of 1.00 g/mL. (Molar Mass for H = 1 , O = 16 , K= 39 , Mn= 55 ) The mole fraction of the solute =
Answer:
The correct answer is 6.67×10⁻³.
Explanation:
Based on the given question, the amount of solute (KmNO4) is 45 grams. The molecular weight of KmNO4 is 158 gram per mole. The moles of solute can be determined by using the formula,
n = mass/molecular weight
n = 45/158 = 0.28
The amount of solvent (water) given is 750 milliliters, and the density of water is 1 gm. per ml, 18 gram per mole is the molecular weight of water. So, the moles of solvent will be,
n = 750/18 = 41.7
The formula for calculating mole fraction is,
Mole fraction = mole of solute / (mass of solute + mole of solvent)
The mole fraction of solute can be determined by putting the values in the above mentioned formula,
Mole fraction of KmNO4 = 0.28/(0.28+41.7)
= 0.28/41.98
= 6.67 × 10⁻³ or 7 × 10⁻³.
In the activity, click on the Keq and ΔG∘ quantities to observe how they are related. Calculate ΔG∘using this relationship and the equilibrium constant (Keq) obtained in Part A at T=298K:Keq=1.24×1020Express the Gibbs free energy (ΔG∘) in joules to three significant figures.
Answer: The Gibbs free energy of the reaction is -114629.4 J
Explanation:
To calculate the Gibbs free energy of the reaction, we use the equation:
[tex]\Delta G^o=-RT\ln K_{eq}[/tex]
where,
[tex]\Delta G^o[/tex] = Gibbs free energy of the reaction = ?
R = Gas constant = [tex]8.314 J/K.mol[/tex]
T = temperature of the reaction = 298 K
[tex]K_{eq}[/tex] = equilibrium constant of the reaction = [tex]1.24\times 10^{20}[/tex]
Putting values in above equation, we get:
[tex]\Delta G^o=-(8.314J/mol.K\times 298K\times \ln (1.24\times 10^{20}))\\\\\Delta G^o=-114629.4J[/tex]
Hence, the Gibbs free energy of the reaction is -114629.4 J
Which of the following structures in the human body has the highest level of organization
Answer:
The brain
Explanation:
With all those instructions the body recqures to respond to it must be so
Hope it helps
10. How many grams of NH, are present in 6 moles
of NH,?
Answer:
90.08784 grams
Explanation:
idk
dropping an Alka-Seltzer tablet into a glass of water _________________________________________ b. bleaching a stain _________________________________________ c. burning a match _________________________________________ d. rusting of an iron nail
Answer:
Hi there!
When dropping Alka-Seltzer into a glass of water, bubbles immediately appear and the solid substance “disappears”, dissolves, into the water. This forms a new compound, a liquid, which means a reaction took place.
An organic chemistry student was studying the solubility of Methyl-N-acetyl-α-D-glucosaminide (1-O-methyl-GlcNAc), a derivative of glucosamine, in water but inadvertently added 1 equiv. of periodic acid instead. Based on your understanding of the reactions of monosaccharides with periodates, draw the organic product that the student obtained.
Complete Question
The diagram for this question is shown on the second uploaded image
Answer:
The organic product obtained is shown on the first uploaded image
Explanation:
The process that lead to this product formation is known as oxidative cleavage which is a reaction that involves the cleavage of a carbon to carbon bond at the same time this carbon which formed the carbon bond are oxidized i.e oxygen is been added to them
Propane (C3H8) burns in a combustion reaction. How many grams of C3H8 are needed to produce 80.3 mols CO2 ?
Answer:
1177.88g of C3H8
Explanation:
We'll begin by writing the balanced equation for the reaction. This is given below:
C3H8 + 5O2 —> 3CO2 + 4H2O
Next we shall determine the number of mole of C3H8 required to produce 80.3 moles of CO2. This is illustrated below:
From the balanced equation above,
1 mole of C3H8 reacted to produce 3 moles of CO2.
Therefore, Xmol of C3H8 will react to produce 80.3 moles of CO2 i.e
Xmol of C3H8 = 80.3/3
Xmol of C3H8 = 26.77 moles
Finally, we shall convert 26.77 moles of C3H8 to grams.
Molar mass of C3H8 = (3x12) + (8x1) = 44g/mol
Mole of C3H8 = 26.77 moles
Mass of C3H8 =..?
Mass = mole x molar mass
Mass of C3H8 = 26.77 x 44
Mass of C3H8 = 1177.88g
Therefore, 1177.88g of C3H8 are needed for the reaction
Question 5 of 20:
Select the best answer for the question.
5. Which of the following is a homonuclear diatomic molecule?
O A. NH3
O B. 2002
O C. Hz
O D. CO
Answer:
Homo nuclear molecule mean having atoms of only one element,
I cant see clearly the option B and C can you correct them , 2002? Hz?
Explanation:
Answer:
H2
Explanation:
What is Hess‘s law please help
The correct answer is D. Hess's law states than the enthalpy of a reaction does not depend on the reaction path
Explanation:
In a chemical reaction, the enthalpy refers to the internal energy in a system and how this increases or decreases during the reaction. According to Hess's law proposed by German Hess in 1940, the enthalpy does not depend on the reaction path or the number of steps in a reaction. This means one reaction of only one step will have the same enthalpy that if the reaction occurs in several steps because the energy that requires all the process is the same. Thus, the "Hess's law states than the enthalpy of a reaction doe s not depend on the reaction path".
4-Nitrophenol, NO2C6H4OH (pKa 7.15), is only slightly soluble in water, but its sodium salt, NO2C6H4O-Na+, is quite soluble in water. Describe the solubility of 4-nitrophenol in solutions of sodium hydroxide, sodium bicarbonate (NaHCO3), and sodium carbonate (Na2CO3). The pKa values for the conjugate acids of sodium hydroxide, sodium bicarbonate (NaHCO3), and sodium carbonate (Na2CO3) are 15.7, 6.36, and 10.33, respectively. Aqueous NaOH: _________ Aqueous NaHCO3: _________ Aqueous Na2CO3: _________
Answer:
Aqueous NaOH: soluble
Aqueous NaHCO₃: insoluble
Aqueous Na₂CO₃: soluble
Explanation:
The organic acid is insoluble. Its salt (ionic) is soluble.
The important principle is:
If you have two acids in a flask, the stronger acid (smaller pKₐ) will protonate the weaker one. The stronger acid will become ionic and therefore more soluble.
1. In NaOH
Let's write the formula for 4-nitrobenzoic acid as HA.
The equation for the reaction is
HA + OH⁻ ⇌ A⁻ + H₂O
pKₐ: 7.15 15.7
HA is the stronger acid. It will protonate the hydroxide ion and be converted to the soluble 4-nitrobenzoate ion.
4-Nitrophenol is soluble in NaOH.
2. In NaHCO₃
HA + HCO₃⁻ ⇌ A⁻ + H₂CO₃
pKₐ: 7.15 6.36
HCO₃⁻ is the stronger acid. It will protonate 4-nitrophenol.
4-Nitrobenzoic acid is insoluble in NaHCO₃.
3. In Na₂CO₃
HA + CO₃²⁻ ⇌ A⁻ + H₂CO₃
pKₐ: 7.15 10.33
HA is the stronger acid. It will protonate the carbonate ion.
4-Nitrophenol is soluble in Na₂CO₃.
A blood sample is left on a phlebotomy tray for 4 hours before it is delivered to the laboratory. Which group of tests could be performed:
The breaking buffer that we use this week contains 10mM Tris, pH 8.0, 150mM NaCl. The elution buffer is breaking buffer that also contains 300mM imidazole. Describe how the instructor made the 0.25L elution buffer for all the students this week given 500ml of 1M of Tris (121.1 g/mole) (pH8.0), 750ml of 5M NaCl (MW
Answer:
Explanation:
From the given information ;the objective is to determine how the instructor made the 0.25L elution buffer
0.25 L elution buffer = 250 mL elution butter
The breaking buffer that we use this week contains
10mM Tris = 0.01 M
150mM NaCl = 0.15 M
300mM imidazole. = 0.3 M
The stock concentration of Tris in 1M
Therefore ; by using the formula: [tex]M_1V_1 = M_2 V_2[/tex]; we can determine the volume in the preparation; so;
[tex]1*V_1 = 0.0 1 \ M * 250 \ mL[/tex]
[tex]V_1 = \dfrac{0.0 1 \ M * 250 \ mL}{1 }[/tex]
[tex]V_1 = 2.5 \ mL[/tex]
In NaCl, The amount of stock concentration is 5 M
so; using the same formula; we have:
[tex]5*V_1 = 0.15 \ M * 250 \ mL[/tex]
[tex]V_1 = \dfrac{0. 15 \ M * 250 \ mL}{5 }[/tex]
[tex]V_1 = 7.5 \ mL[/tex]
From Imidazole ; the amount of stock concentration is
[tex]1*V_1 = 0.3 \ M * 250 \ mL[/tex]
[tex]V_1 = \dfrac{0. 3 \ M * 250 \ mL}{1 }[/tex]
[tex]V_1 = 75 \ mL[/tex]
Thus; we can have a table as shown as :
Stock concentration volume to be added Final concentration
1 M of Tris 2.5 mL 10 mM
5 M of NaCl 7.5 mL 150 mM
1 M of Imidazole 75 mL 300 mM
In conclusion. the addition of all the volume make up the 250 mL elution buffer that is equivalent to 0.25 L.
One of the reagents below gives predominantly 1,2 addition (direct addition) while the other gives predominantly 1,4 addition (conjugate addition). a) Which major organic product is the result of 1,2 addition? ---Select--- b) Draw the skeletal structure of major organic product A
Complete Question
The complete question is shown on the first uploaded image
Answer:
a
The correct option is reagent B
b
The skeletal structure of major organic product A is shown on the third uploaded image
Explanation:
The mechanism of the reaction for A and B are shown on the second the second reaction and looking at this we can see that the reagent that predominately gives 1,2 addition is reagent B
C12H22O11 + 12O2 ---> 12CO2 + 11H2O
there are 10.0 g of sucrose and 10.0 g of oxygen reacting. Which is the limiting reagent?
Answer:
Oxygen is the limiting reactant.
Explanation:
Based on the reaction:
C₁₂H₂₂O₁₁ + 12O₂ → 12CO₂ + 11H₂O
1 mole of sucrose reacts with 12 moles of oxygen to produce 12 moles of CO₂ and 11 moles of H₂O.
10.0g of sucrose (Molar mass: 342.3g /mol) are:
10.0g C₁₂H₂₂O₁₁ × (1mole / 342.3g) = 0.0292 moles of C₁₂H₂₂O₁₁
And moles of 10.0g of oxygen (Molar mass: 32g/mol) are:
10.0g O₂ × (1mole / 32g) = 0.3125 moles of O₂
For a complete reaction of 0.0292 moles of C₁₂H₂₂O₁₁ you need (knowing 12 moles of oxygen react per mole of sucrose):
0.0292 moles of C₁₂H₂₂O₁₁ × (12 moles O₂ / 1 mole C₁₂H₂₂O₁₁) = 0.3504 moles of O₂
As you have just 0.3125 moles of O₂, oxygen is the limiting reactant.
ch3-ch2-ch-ch(cl)-ch=o IUPAC name
Answer:
2-chloropentanal
Answer:
2-chloropentanal
Explanation:
ch3-ch2-ch-ch(cl)-ch=o IUPAC name
H H H H
H - C - C - C - C - C = O
H H H Cl
So as can be seen 2 as the Chlorine is on the second carbon.
Chloro because of the chlorine.
Pent because there's 5 carbon
al because there's an aldehydes
Aldehyde = −CHO
2-chloropentanal
An EpiPen, used to treat anaphalactic allergic reactions, contains 0.30 mg of epinephrine. The concentration of epinephrine in each syringe is 1.0 mg/mL. What is the volume, in milliliters (mL), of solution in each syringe
Answer:
0.3mL
Explanation:
Mass = 0.30mg
Concentration = 1.0 mg/mL
Volume = x
The relationship between the three parameters is given as;
Concentration = Mass / Volume
Making Volume our subject of interest we have;
Volume = Mass / Concentration
Substituting the values we have;
Volume = 0.30 mg / 1 mg/mL = 0.3mL
After recrystallizing an impure sample with isopropanol, you isolate your product by filtration. What solvent do you use to wash your crystals? Room temperature distilled water Room temperature isopropanol Ice cold distilled water Ice cold isopropanol
Answer:
The correct answer is ice cold isopropanol.
Explanation:
Any compound in the initial stage is first dissolved in any suitable solvent and is heated for a certain duration for the process of recrystallization. Afterward, the compound is kept at room temperature so that it gets cooled gradually. In the process, the impurities remain dissolved in the solvent and the pure compound gets separated in the form of a precipitate.
Post all this, the filtration of the pure compound is done and is then washed with the cold solvent, which was initially used to dissolve the compound. Therefore, the appropriate solvent to use in the process is ice-cold isopropanol.
At high temperatures one mole of hydrogen gas reacts with one mole of bromine gas to form hydrogen bromide. At a given temperature the equilibrium constant is 57.6. If at the same temperature, a mixture of 4.67 × 10^-3M bromine gas, 2.14 × 10^−3 hydrogen gas, and 2.40 × 10^−2M hydrogen bromide gas is made, then:
a. the system is at equilibrium.
b. the system is far from equilibrium and will shift to form more hydrogen gas.
c. the system is far from equilibrium and will shift to form more hydrogen bromide gas.
d. nothing can be deduced since we do not know whether the reaction is endothermic or exothermic.
e. nothing can be deduced since we do not know whether the equilibrium constant is Kc or Kp.
Answer:
a. the system is at equilibrium.
Explanation:
Hello,
In this case, the undergoing chemical reaction is:
[tex]H_2+Br_2\rightleftharpoons 2HBr[/tex]
Thus, the law of mass action is given by:
[tex]Keq=\frac{[HBr]^2}{[H_2][Br_2]} =57.6[/tex]
Nonetheless, for the given point of 4.67 × 10^-3M bromine gas, 2.14 × 10^−3 hydrogen gas, and 2.40 × 10^−2M hydrogen bromide gas we should compute the reaction quotient in order to know whether the direction of the reaction is to left or to right, thus:
[tex]Q=\frac{[HBr]^2}{[H_2][Br_2]} =\frac{(2.40x10^{-2})^2}{(4.67x10^{-3})(2.14x10^{-3})} \\\\Q=57.6[/tex]
Therefore, since Keq=Q, we say that the system is at equilibrium, for that reason, the answer is a.
Best regards.
In E. coli, the enzyme hexokinase catalyzes the reaction: Glucose + ATP → glucose 6-phosphate + ADP The equilibrium constant, Keq, is 7.8 x 102. In the living E. coli cells, [ATP] = 7.9 mM; [ADP] = 1.04 mM, [glucose] = 2 mM, [glucose 6-phosphate] = 1 mM. Determine if the reaction is at equilibrium. If the reaction is not at equilibrium, determine which side the reaction favors in living E. coli cells.
Answer:
Explanation:
Glucose + ATP → glucose 6-phosphate + ADP The equilibrium constant, Keq, is 7.8 x 102.
In the living E. coli cells,
[ATP] = 7.9 mM;
[ADP] = 1.04 mM,
[glucose] = 2 mM,
[glucose 6-phosphate] = 1 mM.
Determine if the reaction is at equilibrium. If the reaction is not at equilibrium, determine which side the reaction favors in living E. coli cells.
The reaction is given as
Glucose + ATP → glucose 6-phosphate + ADP
Now reaction quotient for given equation above is
[tex]q=\frac{[\text {glucose 6-phosphate}][ADP]}{[Glucose][ATP]}[/tex]
[tex]q=\frac{(1mm)\times (1.04 mm)}{(7.9mm)\times (2mm)} \\\\=6.582\times 10^{-2}[/tex]
so,
[tex]q<<K_e_q[/tex] ⇒ following this criteria the reaction will go towards the right direction ( that is forward reaction is favorable until q = Keq
The molar enthalpy of
mole of a liquid.
is the heat required to vaporize one
thermochemical equation
combustion
released
vaporization
fusion
absorbed
heat
Answer:
vaporization
Explanation:
The molar enthapy of _vaporization______ is the heat required to vaporize one mole of a liquid”
What is the balanced form of the chemical equation shown below?
Na2SO4(aq) + Sr(NO3)2(aq) → SrSO4(s) + NaNO3(aq)
A. Na2SO4(aq) + Sr(NO3)2(aq)
SISO4(s) + NaNO3(aq)
B. NaSO4(aq) + SINO3(aq) → SSO4(s) + NaNO3(aq)
C. Na2SO4(aq) → SrSO4(s) + 2NaNO3(aq)
Ο Ο
D. Na2SO4(aq) + 2Sr(NO3)2(aq) → 2SSO4(s) + 2NaNO3(aq)
Answer:
C. Na₂SO₄(aq) + Sr(NO₃)₂(aq) → SrSO₄(s) + 2 NaNO₃(aq)
Explanation:
Based on the equation:
Na₂SO₄(aq) + Sr(NO₃)₂(aq) → SrSO₄(s) + NaNO₃(aq)
As you can see, sulfate ions (SO₄) are been replaced for nitrate ions (NO₃). That is a double replacement reaction and is a very important information because 2 NO₃ ions in Sr(NO₃)₂ are producing 1 NO₃ ion. To balance NO₃:
Na₂SO₄(aq) + Sr(NO₃)₂(aq) → SrSO₄(s) + 2 NaNO₃(aq)
1 SO₄ ion in Na₂SO₄ produce 1 SO₄ ion in SrSO₄. And Na and Sr metals are balanced yet. Thus, the balanced form of this chemical equation is:
Na₂SO₄(aq) + Sr(NO₃)₂(aq) → SrSO₄(s) + 2 NaNO₃(aq)Select the correct answer.
What effect does an increase in products have on the reaction rate of a mixture at equilibrium?
A.
The forward reaction rate increases.
B.
Both the forward and the reverse reaction rates decrease.
Both the forward and the reverse reaction rates increase.
D.
The reverse reaction rate increases.
Reset
Next
Answer:
At equilibrium the rate of the forward reaction is equal to the rate of the backward reaction.
When the product of a reaction at equilibrium is increased the equilibrium will shift left or to the reactant side. As a result the excess product will get converted to reactant. This is in accordance to Le Chatelier's principle.
Le Chatelier's principle states that when a system is subjected to stress the equilibrium will shift in a direction to minimize effect of the stress.
Thus the products added to the system at equilibrium will make the equilibrium shift to the reactant side, the rate of the reverse or backward reaction will increase.
Explanation:
Hope This Helps Amigo!
A water tank measures 24in.×48in.×12in. Find the capacity of the water tank in cubic feet. Do not include units in your answer.
Answer: 8 (feet)
Explanation:
24 inches = 2 feet
48 inches = 4 feet
12 inches = 1 foot
To find volume you do Base * Width * Height
2*4*1 = 8
Hope this helps!
The correct answer is 8 (feet).
How to calculate ?
24 inches = 2 feet48 inches = 4 feet12 inches = 1 footTo find volume the method is Base * Width * Height
Therefore, 2*4*1 = 8
Hence, the capacity of the water tank in cubic feet is 8 feet.learn more about capacity below,
https://brainly.com/question/15747509
#SPJ2
A 20.0-mL sample of lake water was acidified with nitric acid and treated with excess KSCN to form a red complex (KSCN itself is colorless). The solution was then diluted to 50.0-mL and put in a 1.00 cm pathlength cell, where it yielded an absorbance of 0.345. For comparison, a 5.0-mL reference sample of 4.80 x 10-4 M Fe3 was treated with HNO3 and KSCN and diluted to 50.0 mL. The reference solution was also placed in a 1.00-cm cell and gave an absorbance of 0.512. What is the concentration of Fe3 in Jordan Lake
Answer:
8.09x10⁻⁵M of Fe³⁺
Explanation:
Using Lambert-Beer law, the absorbance of a sample is proportional to its concentration.
In the problem, the Fe³⁺ is reacting with KSCN to produce Fe(SCN)₃ -The red complex-
The concentration of Fe³⁺ in the reference sample is:
4.80x10⁻⁴M Fe³⁺ × (5.0mL / 50.0mL) = 4.80x10⁻⁵M Fe³⁺
Because reference sample was diluted from 5.0mL to 50.0mL.
That means a solution of 4.80x10⁻⁵M Fe³⁺ gives an absorbance of 0.512
Now, as the sample of the lake gives an absorbance of 0.345, its concentration is:
0.345 × (4.80x10⁻⁵M Fe³⁺ / 0.512) = 3.23x10⁻⁵M.
As the solution was diluted from 20.0mL to 50.0mL, the concentration of Fe³⁺ in Jordan lake is:
3.23x10⁻⁵M Fe³⁺ × (50.0mL / 20.0mL) = 8.09x10⁻⁵M of Fe³⁺
The concentration of Fe³⁺ in Jordan Lake is = 8.09* 10⁻⁵ M
According to Lambert-Beer law ;The rate of absorbance of a sample is directly proportional to concentration of the sample
The reaction that produces a red complex
Fe³⁺ + KScN ----> Fe ( SCN )₃ ( red complex )
First step: Determine the Concentration of Fe³⁺ in reference sample
= 4.80x10⁻⁴ * ( 5.0 / 50.0 ) = 4.80 * 10⁻⁵M
reference sample was diluted from 5.0 mL to 50.0 mL
∴ Concentration of 4.80 * 10⁻⁵M has an absorbance = 0.512
Given that Lake sample absorbance = 0.345
Next step : Determine the concentration of the lake sample
Concentration of lake sample :
= absorbance of lake sample * ( conc of reference sample / absorbance )
= 0.345 * ( 4.80* 10⁻⁵ / 0.512 ) = 3.23* 10⁻⁵M.
Final step : Determine the concentration of Fe³⁺ in Jordan lake
= 3.23 * 10⁻⁵ * ( 50.0mL / 20.0mL) = 8.09* 10⁻⁵ M
Note : Solution was diluted from 20.0 mL to 50.0 mL
Hence we can conclude that The concentration of Fe³⁺ in Jordan Lake is = 8.09* 10⁻⁵ M .
Learn more : https://brainly.com/question/24287054
Unscramble the following words to form a complete
sentence about the cycles of nature:
limited is through environment Matter recycled the on Earth is and
Answer:
recycled is limited through enviroment and matter on earth
Explanation:
which statements describe how chemical formulas, such as H2O, represent compounds?
Answer:
2 Hydrogen One oxygen
Explanation:
Identify the state(s) of matter that each property describes.
Answer:solid,liquid,gas,plasma
Explanation:
This question seems incomplete. I believe the full question is as followed:
Identify the state(s) of matter that each property describes.
1.) takes the shape of its container:
O gas
O liquid
O solid
2.) fills all available space:
O gas
O liquid
O solid
3.) maintains its shape:
O gas
O liquid
O solid
4.) can be poured:
O gas
O liquid
O solid
5.) is compressible:
O gas
O liquid
O solid
6.) has a fixed volume:
O gas
O liquid
O solid
The answers to the 1st are gas and liquid.
The answer to the 2nd is gas.
The answer to the 3rd is solid.
The answer to the 4th is liquid.
The answer to the 5th is gas.
The answers to the 6th are liquid and solid.
Dry chemical hand warmers utilize the oxidation of iron to form iron oxide according to the following reaction: 4Fe(s)+3O2(g)→2Fe2O3(s) Standard thermodynamic quantities for selected substances at 25 ∘C Reactant or product ΔH∘f(kJ/mol) Fe(s) 0.0 O2(g) 0.0 Fe2O3(s) −824.2 Calculate ΔH∘rxn for this reaction.
Answer:
-1648.4 kJ/mol
Explanation:
Based on Hess's law:
ΔHr = ∑n×ΔH°f(products) - ∑n×ΔH°f(reactants)
In the reaction:
4Fe(s) + 3O₂(g) → 2Fe₂O₃(s)
ΔHr = 2 ΔH°f {Fe₂O₃} - (4ΔH°f {Fe(s)} + 3ΔH°f{O₂(g)}
As:
ΔH°f {Fe₂O₃} = -824.2kJ/mol
ΔH°f {Fe(s)} = 0.0kJ/mol
ΔH°f{O₂(g)} = 0.0kJ/mol.
Thus,
ΔHr = 2 ₓ -824.2kJ/mol =
-1648.4 kJ/molAnswer:
-1648.4 kJ
Explanation:
The product has the only nonzero heat of formation, so it is the only value needed to calculate the enthalpy of this reaction. Normally, you would want to express the enthalpy of a reaction with respect to one mole of a chemical species, whether it is a reactant or product. However, since the balanced chemical equation contains only coefficients greater than 1, you should consider how the enthalpy relates to one mole of each substance according to the coefficients. In other words, − 1648.4 kJ of heat is released when 4 mol of Fe reacts with 3 mol of O2 to produce 2 mol of Fe2O3 .
where are chemicals found in the home?
a. only in the bathroom
b. only in locked cabinets
c. in every room
d. only in the kitchen
Answer:
c
Explanation:
chemicals can be found in every part of our lives