Answer:
argon
For example, the K+ ion is isoelectronic with argon. Potassium has 19 electrons and 1 is in the outermost shell: a valence electron. If potassium is ionized and becomes a +1 cation, this is to say that it lost its single valence electron. This is favorable, because it gives potassium a noble gas configuration
ANSWER PLEASE LIMIT TIME !!!!
What do earth and space have alike ?
Answer:
Great question, here are a few! (╯°▽°)╯ ┻━┻
Explanation:
1. Atmosphere, The first difference between the Earth and space is the atmosphere.
2. radiation (high level of dangerous particles)!
3. gravity (weightlessness in space)
Word equation for Silver being added to sulphuric acid
Answer:
See the answer below
Explanation:
When silver is added to dilute sulphuric acid, no reaction would occur. However, silver reacts with hot and concentrated sulphuric acid to produce silver sulphate, sulphur dioxide, and water.
The equation of the reaction is as below:
silver + sulphuric acid --> silver sulphate + water + sulphur dioxide
[tex]2Ag(s) + 2 H_2SO_4(aq) -->Ag_2SO_4 (s) + 2 H_2O (l) + SO_2 (aq)[/tex]
How many copper(I) ions (atoms of Cu 1+ ) are in a sample of copper(I) sulfate that weighs 35.4 grams?
Answer:
copper has 2+ ions in a sample of copper
how many electrons does titanium have in the D orbital in its ground state electron configuration
2
3
0
1
Answer:
Your answer would be 2
Explanation:
The electron configuration for titanium is 1s22s22p63s23p63d24s2, according to the Jefferson Lab website. The element's 22 electrons are arranged in four energy levels surrounding the nucleus of the atom.
Electrons orbit the nucleus in energy levels, which are also called shells. These energy levels contain sub-shells, or orbitals, each of which holds a certain number of electrons. By looking at the electron configuration for titanium, it is possible to determine how its electrons are arranged.
There are two electrons in the s orbital of the first energy level. The second level contains eight electrons, with two in the s orbital and six in the p orbital. There are electrons in three orbitals of the third energy level. There are two in the s orbital, six in the p orbital and two in the d orbital. The fourth energy level has two electrons in its s orbital.
The study of chemicals and bonds is called chemistry.
The correct answer is 2.
The representation of electrons in the shell is called electronic configuration. The electron configuration for titanium is [tex]1s^22s^22p^63s^23p^63d^24s^2[/tex],
Electrons orbit the nucleus in energy levels, which are also called shells.
These energy levels contain as follows:-
Sub-shellsOrbitals,Each of which holds a certain number of electrons. By looking at the electron configuration for titanium, it is possible to determine how its electrons are arranged. There are two electrons in the s orbital of the first energy level. The second level contains eight electrons, with two in the s orbital and six in the p orbital.
There are electrons in three orbitals of the third energy level. There are two in the s orbital, six in the p orbital, and two in the d orbital. The fourth energy level has two electrons in its s orbital.
Hence, the correct answer is A that is 2.
For more information, refer to the link:-
https://brainly.com/question/12985618
A small, hard-shelled fossil that resembles a modern-day ocean organism was found
in the desert.
As
What can geologists conclude about this desert?
These shelled organisms migrated from the ocean to the desert.
Prehistoric man enjoyed eating shelled organisms in the desert.
A glacier once moved across the desert sands.
The desert was once covered by ocean water.
Answer:
The desert was one covered by ocean water.
Explanation:
Price increases on goods in the economy signal producers to __________ production.
A.
stop
B.
increase
C.
decrease
D.
maintain
Answer:
C. decrease
Explanation:
Price increases on goods in the economy signal producers to decrease production.
Producers benefits more when the price of goods and services increases in the market. This makes them have more profit.
To maintain this profit level, they often decrease their production output to create a form of artificial scarcity within the market to sustain the price at which their goods trades.
If the producer increases the amount of goods they produce, this flux of goods can cause a decrease in price as the consumer is favored with a good bargaining power.Answer:
C
Explanation:
edge 2021
What is the symbol and number of protons in Arsenci
Answer:
As 33
Explanation:
Symbol: As
Atomic Number/ Number of Protons: 33
Calculate the maximum
mass of magnesium oxide
that can be made from
2.4g of magnesium and
2.4g of oxygen.
1
1
2Mg + 0, → 2Mgo
Answer:
Mass = 3 g
Explanation:
Given data:
Mass of magnesium = 2.4 g
Mass of oxygen = 2.4 g
Mass of magnesium oxide formed = ?
Solution:
Chemical equation;
2Mg + O₂ → 2MgO
Number of moles of oxygen:
Number of moles = mass / molar mass
Number of moles = 2.4 g/ 32 g/mol
Number of moles = 0.075 mol
Number of moles of magnesium:
Number of moles = mass / molar mass
Number of moles = 2.4 g/ 24 g/mol
Number of moles = 0.1 mol
now we will compare the moles of magnesium oxide with both reactant.
Mg : MgO
2 : 2
0.075 : 0.075
O₂ : MgO
1 : 2
0.1 : 2/1×0.1 = 0.2
Mass of magnesium oxide:
Mass = number of moles × molar mass
Mass = 0.075 mol × 40 g/mol
Mass = 3 g
The only way an object's speed or direction of motion can be changed is if a(n) _______ force acts on it.
A.
frictional
B.
unbalanced
C.
balanced
D.
electrical
Answer:
B. Unbalanced
Explanation:
I learned this in 8th grade.
:))) This is the right answer.
Can someone help with part B asap
Well, simply put,
There is no Hydrogen Chloride being produced from this reaction, but instead it's Ammonium Chloride.
How many atoms of each element are in NH3 and CH4
Answer:N-1
H-3
C-1
H-4
Explanation:Nitrogen-1,Hydrogen-3(Ammonia),Carbon-1,Hydrogen-4(Methane).
3) Hubba Bubba Bubble gum
was $0.25 thirty years ago.
Today it costs $1.39. What is
the percent increase? Round
to the nearest hundredth (if
necessary).
tock
2.07
Explanation:
1.39/0.25 * 100% = 5.56%
How to balance 4NaNO3 + 5PbO → 8Pb(NO3)2 + 7Na2O with coefficients?
The balanced equation
2NaNO₃ + PbO → Pb(NO₃)₂ + Na₂O
Further explanationGiven
Reaction
NaNO3 + PbO → Pb(NO3)2 + Na2O
Required
Balanced equation
Solution
1. Give coefficientaNaNO₃ + bPbO → Pb(NO₃)₂ + cNa₂O(Pb(NO₃)₂ ⇒coefficient 1 for the most complex compounds)
2. Make an equationN, left=a, right=2⇒a=2
Na, left = a, right=2c⇒a=2c⇒2=2c⇒c=1
Pb, left = b, right=1⇒b=1
The equation becomes :
2NaNO₃ + PbO → Pb(NO₃)₂ + Na₂O
Lab Report: Types of chemical reactions
Answer:
The five basic types of chemical reactions are combination, decomposition, single-replacement, double-replacement, and combustion. Analyzing the reactants and products of a given reaction will allow you to place it into one of these categories. Some reactions will fit into more than one category.
Answer:
SEE BELOW HEHEHE YOURE WELCOME
Explanation:
Types of Chemical Reactions
The purpose of this experiment was to make observations of the reactants and products and then later use this information to write a balanced chemical equation. My question before this experiment was how will the reactants affect the products. The hypothesis I made before this experiment was that based off of the materials being used, a gas will form, and so will a solid. I still do not know what the variables are in this experiment such as the independent or dependent.
The materials used in this experiment were:
Bunsen Burner
Striker
Tongs
Test Tube
Test Tube Rack
Test Tube Holder
Spatula
Sand Paper
Transfer Pipette
Tweezers
Evaporating dish
The substances used in this experiment were:
Copper wire
Sodium carbonate
Copper sulfate
Potassium iodide
Lead nitrate
Zinc
In this experiment we started off by placing about 20 drops of copper sulfate solution into a test tube and then put zinc into the test tube and watched it as single replacement occurred and zinc sulfate was the product.Next we put 10 drops of potassium iodide into another test tube and 10 drops of lead nitrate into a separate test tube. Then we added the lead nitrate into the potassium iodide and watched as double replacement occurred as lead iodide formed and potassium nitrate formed as well. Next, I sanded down a piece of 3-inch copper wire until it was shiny and watched as combustion and synthesis occurred when we held the piece of copper over a bunsen burner. Copper oxide was found formed on the wire. The other reactant in this equation was oxygen gas. After this, we used a small spatula to place about half an inch of sodium carbonate in a clean test tube and then heated the tube over the flame and watched as decomposition took place and carbon dioxide was released. The reaction was a gas formation and 2 products were formed. This was the lab experiment.
Based on this experiment and my hypothesis made beforehand, my hypothesis was almost correct other than the fact that I did not think that color change would occur so I was surprised by that. But other than that, my data did support my hypothesis showing that a gas and a solid were formed in two different ways. One error I made was when I was recording the data in a data table, I did not notice a color change at first but I rewatched the experiment. One way that I could have improved this lab investigation was pay more attention to the precise details because those make a huge difference.
Given the reaction: 4NH3 + 502 4NO + 6H2O
What is the total number of moles of NO produced when
1.0 mole of O2 is completely consumed?
Answer:
[tex]\frac{4}{5}[/tex] moles
Explanation:
The reaction equation is given as:
4NH₃ + 5O₂ → 4NO + 6H₂O
The number of moles of O₂ that completely reacted is given as 1 mole
To solve this problem, we are going to use a stoichiometric approach from the balanced reaction equation:
5 moles of O₂ will react completely to produce 4 moles of NO
1 mole of O₂ will therefore react to produce x mole of NO
5x = 4
x = [tex]\frac{4}{5}[/tex] moles of NO
Answer: 0.80 mole
Explanation:
a book (m = 2 kg) is raised to a height of 1.5 m above the ground. Calculate the gravitational potential energy of the book.
Answer:
[tex]\boxed {\boxed {\sf 29.4 \ Joules }}[/tex]
Explanation:
Gravitational potential energy can be found using the following formula.
[tex]PE_g= m*g*h[/tex]
When m is the mass, g is the gravitational acceleration, and h is the height.
The book has a mass of 2 kilograms. It's height is 1.5 meters above the ground. Assuming this is on Earth, the gravitational acceleration is 9.8 m/s².
[tex]m= 2 \ kg \\h= 1.5 \ m \\g= 9.8 \ m/s^2[/tex]
Substitute the values into the formula.
[tex]PE_g=2 \ kg * 1.5 \ m * 9.8 \ m/s^2[/tex]
Multiply the first two numbers together.
[tex]PE_g=(3.0 \ kg*m)( 9.8 \ m/s^2)[/tex]
Multiply again.
[tex]PE_g=29.4 \ kg*m^2/s^2[/tex]
1 kilogram square meter per square second is equal to 1 Joule The answer we calculated is equal to 29.4 J[tex]PE_g= 29.4 \ J[/tex]
The gravitational potential energy of the book is 29.4 Joules.
14.
Consider the following balanced chemical equation:
P205
3 H2O → 2 H3PO4
Calculate the mass of hydrogen phosphate, H3PO, that will be produced from 105.9 g of P,Os.
Answer:
Mass = 72.52 g
Explanation:
Given data:
Mass of hydrogen phosphate produced = ?
Mass of P₂O₅ react = 105.9 g
Solution:
Chemical equation:
P₂O₅ + 3H₂O → 2H₃PO₄
Number of moles of P₂O₅:
Number of moles = mass/molar mass
Molar mass of P₂O₅ 283.9 g/mol
Number of moles = 105.9 g/ 283.9 g/mol
Number of moles = 0.37 mol
Now we will compare the moles of P₂O₅ with H₃PO₄ from balance chemical equation.
P₂O₅ : H₃PO₄
1 : 2
0.37 : 2/1×0.37= 0.74 mol
Mass of H₃PO₄ :
Mass = number of moles × molar mass
Mass = 0.74 mol × 98 g/mol
Mass = 72.52 g
URGENT!! Can someone please explain this to me?
2CH4 + 2O2 → CO2 + 2H2O
If 7.4 moles of carbon dioxide (CO2) form at the end of the reaction, how many moles of methane (CH4) and oxygen gas (O2) entered the reaction?
__ moles of methane and __ moles of oxygen gas
Answer:
[tex]CH _{4}+ 2O _{2} → CO _{2} + 2H _{2}O[/tex]
for the balanced equation
[tex]from \: the \: equation \\ 1 \: mole \: of \: methane \: gives \: 1 \: mole \: of \: carbon \: dioxide \\ 7.4 \: moles \: of \: carbon \: dioxide \: will \: be \: given \: by \: (7.4 \times 1)moles \: of \: methane \\ = 7.4\: moles \: of \: methane \\ \\ since \: moles \: of \: oxygen \: double \: those \: of \: methane \\ moles \: of \: oxygen \: = 7.4\times 2 \\ = 14.8 \: moles \: of \: oxygen[/tex]
A student rubbed a plastic comb with a piece of silk cloth. She held the comb near running water and saw that the stream of
water moved toward the comb.
Why did the stream of water move toward the comb?
A Rubbing the comb caused it to get hot so it repelled the water.
O B. Rubbing the comb caused charges to build up, so it repelled the water.
C. Rubbing the comb caused it to become magnetized, so it attracted the water.
O D. Rubbing the comb caused static electricity to build up, so it attracted the water.
Answer:
c
Explanation:
c
Answer:
Rubbing the comb caused static electricity to build up, so it attracted the water.
How many moles of sulfur will be needed to react with 5.00 grams of aluminum?
Answer:
9584738373848838e7e8e
Which statement best describes what an ocean tide is?
A A change in water level that makes a high tide higher
B A change in water level at the shoreline that is being caused by the gravitational pull of the Moon
C A change in water level at the shoreline that is being caused by the gravitational pull of the Sun
D A change in water level that makes a low tide lower
Answer: B
Explanation: high tides and low tides are usually caused by the moon. The moons gravitational pull generates something called the tidal force. I’m not gonna go deep into this but yeah I think the answer is B
Answer:
:)
Explanation:
Describe how a measuring cylinder can be used to measure the volume of gas produced
A spray can is used until it is empty except for the propellant gas, which has a pressure of 1307 torr at 23°C. If the can is thrown into a fire (T = 477°C), what will be the pressure (in torr) in the hot can
Answer:
[tex]P_2=3312torr[/tex]
Explanation:
Hello!
In this case, since here we have a pressure-temperature relationship, we need to use the Gay-Lussac's law in order to compute the final pressure as they are in a directly proportional relationship:
[tex]\frac{P_2}{T_2} =\frac{P_1}{T_1}\\\\P_2= \frac{P_1T_2}{T_1}[/tex]
Now, we plug in the given pressure and temperatures in Kelvins to obtain:
[tex]P_2= \frac{1307torr*(477+273)K}{(23+273)K}\\\\P_2=3312torr[/tex]
Best regards!
How can you identify an element that is a metalloid?
what color is oxygen
Answer:
colourless
Explanation:
hope it helps
0.0721 moles of a compound have a mass of 31.008 grams. What is the molar mass?
(please show work and provide an explanation!)
Answer:
divide the moles by gram to get molar mass
use calculator and get yo ans
How many chlorine atoms are on the products side of the reaction 2al 6hcl → 2alcl3 3h2? 2
Answer:
6
Explanation:
The given reaction is aluminium with hydrochloric acid
2Al + 6HCl → 2AlCl3 + 3H2
the product is aluminium chloride and hydrogen gas.
We can clearly, calculate that there are 2*3=6 chlorine atoms in product side of the reaction.
Answer:
C. 6
Edg2021
Explanation:
Person is right.
please helpppp!!!
A tank containing 550 mL of oxygen has a pressure of 3.5 atms. If the pressure is changed to standard atmospheric pressure, approximately 1.0 atms, what will the resulting volume be?
help!!
Answer:1925ml
Explanation:
Do not quote me on this but with boyles law in mind as pressure tends to increase the volume of the container decreases. So I believe that you would need to multiply 550ml by the 3.5atm because p1v1=p2v2 so they both end up with the same end answer and if the pressure is 1.0atm then the answer would maybe be 1925ml. since 1*1925ml =1925ml and 3.5atm*550=1925ml (there is always a possibility this is wrong though)
Answer: the picture shows work for number 1,2,4,5,7
Explanation: number 3: as the pressure in the volume decreases, the volume increases causing it to expand and eventually blow.
number 6: because the temperature and the amount of gas don’t change, these terms don’t appear in the equation. What Boyle’s law means is that the volume of a mass of gas is inversely proportional to its pressure. This linear relationship between pressure and volume means doubling the volume of a given mass of gas decreases its pressure by half.
hope this helps :))
1.Explain why the reactivity of group 7 decreases as you move down the group. Try to use the sentence starters here: When group 7 elements react, their atoms….
As you move down the group, the outer shells get…
Therefore the force of attraction between the shells and the nucleus is….
This makes attracting an extra electron…
Answer:
Explanation:
When group 7 elements react , their atoms gains one electron into their highest occupied energy level ( outer shell) to form single negative - charged ion .
As you move down the group , the outer shells get increased i.e an additional electron shell is added thereby increasing the atomic radius of the atom. The electrons in the outer shell move further away from the nucleus as we go down the group .
Therefore the force of attraction between the shells and nucleus is decreased .
This makes attracting an extra electron difficult . And so ability of the atom to attract electron to fill the outermost shell reduces which means the reactiveness of the atom reduces.
A neutral atom (atomic number > 1) has
(a) electron and proton
(b) neutron and electron
(c) neutron, electron and proton
(d) neutron and proton.